Mouse USB e touchpad

[sky79]

Ciao,
vorrei utilizzare il mouse USB su un portatile So ny Vaio PCG-FR415S con installata una debian e un kernel 2.6.4 fresco di giornata. Il mouse è attaccato alla porta USB ma la lucina manco si accende. Penso sia un problema di moduli non compilati/caricati dato che non funziona neppure la penna USB (prima, sul kernel 2.4 almeno quella riuscivo a montarla)


#lsmod

Module                  Size  Used by
ati_agp                 6540  1
agpgart                25640  1 ati_agp
usbmouse                4480  0
ohci_hcd               16260  0
pcmcia_core            49728  0
8250                   17888  0
serial_core            18432  1 8250
hid                    29632  0
ufs                    60932  0
usb_storage            37760  0
ohci1394               30468  0
ieee1394               89912  1 ohci1394
usbkbd                  6144  0
usbcore                86748  6 usbmouse,ohci_hcd,hid,usb_storage,usbkbd

Il mio file XF86Config-4 recita così:



**********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/psaux"


# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
EndSection

**********************************************************************
# ServerLayout sections.
# **********************************************************************


Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoDreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "AlwaysCore"
InputDevice "Keyboard1" "CoreKeyboard"



Idee?

[sky79]

P.s Mouse2 prima era Corepointer, l'ho cambiata temporaneamente su suggerimento tanto per provare....

[stuart]

ho un vaio fr215e
ora ti dò l'xf86config per mouse e touchpad, se non basta dimmelo che ti posto pure lsmod (ora non psso, sono sul desktop)

Section "ServerLayout"
Identifier "XFree86 Configured"
#Screen 0 "Screen0" 0 0
Screen 0 "Screen AGP TwinView" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
InputDevice "USBmouse" "SendCoreEvents"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "speedo"
Load "freetype"
Load "record"
Load "xtrap"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"

EndSection

Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "CorePointer" "true"
EndSection

Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28-96# Warning: This may fry old Monitors
VertRefresh 50-76# Very conservative. May flicker.
# These are some Modelines that happen to work on many systems
# Especially the "1024x768" has been thoroughly tested, even on Laptops
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz
Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz
Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
vendorname "[Monitor0]"
modelname "[Monitor0]"
ModeLine "800x600/72Hz" 50 800 856 976 1040 600 637 643 666 +HSync +VSync
ModeLine "1024x768/60Hz" 65 1024 1032 1176 1344 768 771 777 806 -HSync -VSync
ModeLine "1024x768/76Hz" 85 1024 1032 1152 1360 768 784 787 823
EndSection

#Section "Monitor"
#Identifier "TV"
#HorizSync 30 - 50
#VertRefresh 60
#EndSection



Section "Device"

Option "sw_cursor"

#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
#Identifier "Card0"
Identifier "NV AGP TwinView"

Driver "nvidia"
VendorName "Nvidia corporation"
BoardName "Nvidia geforce 4 420 go"
BusID "AGP:1:0:0"
Option "NvAGP" "3"
Option "DPMS"
Option "TwinView" "1"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "TwinViewOrientation" "Clone"
Option "MetaModes" "800x600@800x600,800x600@800x600"
Option "TVStandard" "PAL-G"
Option "NoLogo" "1"
Option "DigitalVibrance" "3"
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "64"
Option "CursorShadowYOffset" "2"
Option "CursorShadowXOffset" "4"
EndSection

Section "Screen"
#Identifier "Screen0"
Identifier "Screen AGP TwinView"
#Device "Card0"
Device "NV AGP TwinView"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768/60Hz" "640x480"
Virtual 0 0
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768/60Hz" "640x480"
Virtual 0 0
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768/60Hz" "640x480"
Virtual 0 0
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768/60Hz" "640x480"
Virtual 0 0
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768/60Hz" "640x480"
Virtual 0 0
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768/60Hz" "640x480"
Virtual 0 0
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768/60Hz" "640x480"
Virtual 0 0
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

[stuart]

per la penna e il mouse sei sicuro che sia ohci_hcd?

[sky79]

ciao e grazie per la risposta..

in che senso non sia ohci_hcd?
è caricato come modulo...intendi che potrebbe dare problemi?

[stuart]

devi usare l'usb corretto per il tuo hardware:
se non funziona ohci prova a sostituirlo con ehci-hcd (se sono usb 2.0) e uhci-hcd (che sono quelli che uso io sul fisso, sul vaio non mi ricordo)

[PiloZ]

mi risulta che sul kernel 2.6.4 siano caricati di default i moduli per farti andare le periferiche usb.

assicurati comunque che sul kernel ci siano:
mousedev
input
hid

dal tuo lsmod vedo solo hid.

sul 2.4.22 solo caricando quei moduli il mouse fuori da xserver si accese per la prima volta.