nero express DVD errori HELP

[bellatryx]

da un video DV , convertito in mpeg2 con parametri per DVD . devo creare un DVD con Nero ma ho riscontrato i seguenti problemi...
allora con Nero 6 aggiornato all'ultima versione , masterizzatore Sony DRU 500 A con ultimo firmware , creo file immagine ...
problemi.. a volte si blocca ..
poi anche dopo avere creato l'immagine .. tento di masterizzare su DVD ( provati vari supporti anche riscrivibili) e continua a bloccarsi ed a darmi errore.. vi riporto gli errori:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 19/02/2004 18.13.35
Versione Nero: 6.0.0.9 (Nero Express)
Masterizzatore: <SONY DVD RW DRU-500A> Versione: 2.0f - HA 1 TA 0 - 6.0.0.9
Driver Adattatore: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-500A >Versione: 2.0f - HA 1 TA 0 - 6.0.0.9
Driver Adattatore: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : IC35L040AVER07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-500A atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120L0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : YAMAHA CRW4416S 1.0j aic78xx Port 2 ID 2 DMA: Off
OtherPeripheral : HPT RCM DEVICE Hpt3xxNT Port 3 ID 0 DMA: Off
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 4 ID 0 DMA: Off
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 740MB (758192kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

20.2.2004
Scrivi Immagine DVD
15.38.09 #1 Text 0 File Reader.cpp, Line 118
Reader running

15.38.09 #2 Text 0 File Writer.cpp, Line 127
Writer SONY DVD RW DRU-500A running

15.38.09 #3 IMAGEGEN -10 File ImageGen.cpp, Line 363
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -78374912
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=457:29.58 ( 2058733)
MTYP: Mediumtype = DVD (old format) (0x1C)

15.38.09 #4 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

15.39.05 #5 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2058732 (457:29.57)

15.39.05 #6 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

15.39.05 #7 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: SONY DVD RW DRU-500A, Media type: DVD-R
Disc Manufacturer: MCI4XG - 01
Disc Application Code: 64, Disc Physical Code: 193

15.39.05 #8 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2058733 (2058733) = #2058733/457:29.58
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2058733 blocks [SONY DVD RW DRU-500A ]
--------------------------------------------------------------

15.39.05 #9 Text 0 File Burncd.cpp, Line 3805
Puoi solo scriv. a 2x invece di 2x sul disco selez

15.39.06 #10 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [SONY DVD RW DRU-500A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4216592384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2058733 | lead-out | 1 | 0x00 | 0x41

15.39.06 #11 Phase 24 File dlgbrnst.cpp, Line 1843
Inizio ottimizzazione file

15.39.06 #12 Phase 25 File dlgbrnst.cpp, Line 1843
Ottimizzazione file completata

15.39.06 #13 Phase 36 File dlgbrnst.cpp, Line 1843
Inizio scrittura a 2x (2.760 KB/s)

15.39.06 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

15.39.06 #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 25:31,374 (1531374ms) -> OK

15.39.06 #16 Text 0 File DVDR.cpp, Line 1485
Recording mode: Sequential Recording Mode

15.39.06 #17 Text 0 File Mmc.cpp, Line 18724
Set BUFE: Power-Burn -> ON

15.39.06 #18 Text 0 File DVDR.cpp, Line 1600
Start write address at LBA 0
DVD high compatibility mode: Yes

15.39.06 #19 Text 0 File Cdrdrv.cpp, Line 7906
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15.39.10 #20 Text 0 File Writer.cpp, Line 318
15:39:10.194 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.40.01 #21 Text 0 File Writer.cpp, Line 318
15:40:01.388 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.40.01 #22 Text 0 File Writer.cpp, Line 318
15:40:01.999 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.40.02 #23 Text 0 File Writer.cpp, Line 318
15:40:02.229 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.40.02 #24 Text 0 File Writer.cpp, Line 318
15:40:02.269 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.40.02 #25 Text 0 File Writer.cpp, Line 318
15:40:02.309 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.41.15 #26 Text 0 File Writer.cpp, Line 318
15:41:15.995 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.42.30 #27 Text 0 File Writer.cpp, Line 318
15:42:30.633 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.42.30 #28 Text 0 File Writer.cpp, Line 318
15:42:30.663 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.43.45 #29 Text 0 File Writer.cpp, Line 318
15:43:45.340 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.44.59 #30 Text 0 File Writer.cpp, Line 318
15:44:59.967 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.44.59 #31 Text 0 File Writer.cpp, Line 318
15:44:59.997 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.46.14 #32 Text 0 File Writer.cpp, Line 318
15:46:14.635 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.47.29 #33 Text 0 File Writer.cpp, Line 318
15:47:29.312 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.48.43 #34 Text 0 File Writer.cpp, Line 318
15:48:43.979 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.49.58 #35 Text 0 File Writer.cpp, Line 318
15:49:58.587 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.49.58 #36 Text 0 File Writer.cpp, Line 318
15:49:58.627 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.51.13 #37 Text 0 File Writer.cpp, Line 318
15:51:13.264 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.52.27 #38 Text 0 File Writer.cpp, Line 318
15:52:27.921 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.52.28 #39 Text 0 File Writer.cpp, Line 318
15:52:28.001 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.53.42 #40 Text 0 File Writer.cpp, Line 318
15:53:42.609 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.54.57 #41 Text 0 File Writer.cpp, Line 318
15:54:57.326 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.56.11 #42 Text 0 File Writer.cpp, Line 318
15:56:11.964 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.57.26 #43 Text 0 File Writer.cpp, Line 318
15:57:26.641 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.57.26 #44 Text 0 File Writer.cpp, Line 318
15:57:26.751 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.58.41 #45 Text 0 File Writer.cpp, Line 318
15:58:41.438 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.59.56 #46 Text 0 File Writer.cpp, Line 318
15:59:56.056 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

15.59.56 #47 Text 0 File Writer.cpp, Line 318
15:59:56.166 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

16.01.10 #48 Text 0 File Writer.cpp, Line 318
16:01:10.793 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

16.02.25 #49 Text 0 File Writer.cpp, Line 318
16:02:25.400 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

16.02.25 #50 Text 0 File Writer.cpp, Line 318
16:02:25.431 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

16.03.40 #51 Text 0 File Writer.cpp, Line 318
16:03:40.058 - SONY DVD RW DRU-500A : Queue again later (Intervall : 23msec)

16.05.36 #52 SCSI -1064 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A051000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x1F 0x69 0xF0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x21 0x02

16.05.36 #53 CDR -1064 File Writer.cpp, Line 335
Indirizzo del blocco non valido

16.05.36 #54 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

16.07.36 #55 SCSI -1093 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A051000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1F 0x69 0xF0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0xFF 0xFD 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x02 0x00

16.07.36 #56 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

16.07.36 #57 CDR -1093 File WriterStatus.cpp, Line 162
Accesso al CD terminato

16.07.36 #58 TRANSFER -24 File WriterStatus.cpp, Line 162
Non posso terminare la scrittura Disc At Once

16.07.36 #59 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

16.07.36 #60 Phase 38 File dlgbrnst.cpp, Line 1843
Scrittura fallita a 2x (2.760 KB/s)


Existing drivers:
File 'Drivers\NeroCD2k.sys': Ver=1.0.0.9, size=44227 bytes, created 16/04/2001 11.54.26
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (099), size=53072 bytes, created 26/07/2003 16.34.34
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1039), size=22201 bytes, created 26/07/2003 16.34.34
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 10/09/2002 13.00.00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

altro :
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 19/02/2004 18.13.35
Nero version: 6.3.0.3 (Nero Express)
Recorder: <SONY DVD RW DRU-500A> Version: 2.0f - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-500A >Version: 2.0f - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC35L040AVER07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-500A atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120L0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : YAMAHA CRW4416S 1.0j aic78xx Port 2 ID 2 DMA: Off
OtherPeripheral : HPT RCM DEVICE Hpt3xxNT Port 3 ID 0 DMA: Off
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-500A F: CDRom1
YAMAHA CRW4416S G: CDRom0
VOBID InstantDrive CD H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 665MB (681064kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

21.2.2004
Burn DVD Image
23.10.57 #1 Text 0 File Reader.cpp, Line 118
Reader running

23.10.57 #2 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-500A running

23.10.57 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -78374912
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=457:29.58 ( 2058733)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <I:\smLIVE2003.nrg>

23.10.57 #4 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

2.13.09 #5 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2058732 (457:29.57, 4020MB)

2.13.09 #6 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

2.13.09 #7 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: SONY DVD RW DRU-500A, Media type: DVD-RW
Disc Manufacturer: OPTODI - SCK001
Disc Application Code: 64, Disc Physical Code: 214

2.13.09 #8 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
This disc is not empty.
(Medium in drive: DVD-RW. Medium required by compilation: DVD+R/RW; DVD-R/RW.)
VMS. Disc was erased successfully.
Accessing disc...
(Medium in drive: DVD-RW. Medium required by compilation: DVD+R/RW; DVD-R/RW.)

2.13.09 #9 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2058733 (2058733) = #2058733/457:29.58
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2058733 blocks [SONY DVD RW DRU-500A ]
--------------------------------------------------------------

2.13.09 #10 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY DVD RW DRU-500A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4216285184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2058733 | lead-out | 1 | 0x00 | 0x41

2.13.10 #11 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

2.13.10 #12 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

2.13.10 #13 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

2.13.10 #14 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 1x (1.380 KB/s)

2.13.10 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

2.13.10 #16 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 12:48,187 (768187ms) -> OK

2.13.10 #17 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

2.13.10 #18 Text 0 File Mmc.cpp, Line 19487
Set BUFE: Power-Burn -> ON

2.13.10 #19 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

2.13.10 #20 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2.13.16 #21 Text 0 File Cdrdrv.cpp, Line 1277
02:13:16.788 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

2.14.43 #22 Text 0 File Cdrdrv.cpp, Line 1277
02:14:43.813 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

2.14.44 #23 Text 0 File Cdrdrv.cpp, Line 1277
02:14:44.684 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

2.14.44 #24 Text 0 File Cdrdrv.cpp, Line 1277
02:14:44.754 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

2.14.44 #25 Text 0 File Cdrdrv.cpp, Line 1277
02:14:44.795 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

2.14.44 #26 Text 0 File Cdrdrv.cpp, Line 1277
02:14:44.835 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

2.14.44 #27 Text 0 File Cdrdrv.cpp, Line 1277
02:14:44.885 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

2.14.44 #28 Text 0 File Cdrdrv.cpp, Line 1277
02:14:44.935 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

2.14.44 #29 Text 0 File Cdrdrv.cpp, Line 1277
02:14:44.975 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

2.14.45 #30 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04880000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x0A 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x50 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

2.14.45 #31 CDR -1135 File Writer.cpp, Line 301
Write error

2.14.45 #32 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

2.14.45 #33 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

2.14.45 #34 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 2591

2.14.45 #35 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

2.14.45 #36 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

2.14.45 #37 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 1x (1.380 KB/s)


Existing drivers:
File 'Drivers\NeroCD2k.sys': Ver=1.0.0.9, size=44227 bytes, created 16/04/2001 11.54.26
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (099), size=53072 bytes, created 26/07/2003 16.34.34
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1039), size=22201 bytes, created 26/07/2003 16.34.34
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 10/09/2002 13.00.00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

ed ancora :
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 19/02/2004 18.13.35
Nero version: 6.3.0.3 (Nero Express)
Recorder: <SONY DVD RW DRU-500A> Version: 2.0h - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <VOBID InstantDrive CD >Version: 14 - HA 4 TA 0 - 6.3.0.3
Adapter driver: <VOBID> HA 4

=== Scsi-Device-Map ===
DiskPeripheral : IC35L040AVER07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-500A atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120L0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : YAMAHA CRW4416S 1.0j aic78xx Port 2 ID 2 DMA: Off
OtherPeripheral : HPT RCM DEVICE Hpt3xxNT Port 3 ID 0 DMA: Off
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-500A F: CDRom4
YAMAHA CRW4416S G: CDRom0
VOBID InstantDrive CD H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 661MB (677240kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

21.2.2004
Burn DVD Image
11.06.38 #1 Text 0 File Reader.cpp, Line 118
Reader running

11.06.38 #2 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-500A running

11.06.38 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -78374912
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=457:29.58 ( 2058733)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <I:\smLIVE2003.nrg>

11.06.38 #4 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

11.06.39 #5 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2058732 (457:29.57, 4020MB)

11.06.39 #6 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

11.06.39 #7 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: SONY DVD RW DRU-500A, Media type: DVD-RW
Disc Manufacturer: OPTODI - SCK001
Disc Application Code: 64, Disc Physical Code: 214

11.06.39 #8 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11.06.39 #9 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2058733 (2058733) = #2058733/457:29.58
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2058733 blocks [SONY DVD RW DRU-500A ]
--------------------------------------------------------------

11.06.39 #10 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY DVD RW DRU-500A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4216285184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2058733 | lead-out | 1 | 0x00 | 0x41

11.06.39 #11 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

11.06.39 #12 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

11.06.39 #13 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

11.06.39 #14 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 1x (1.380 KB/s)

11.06.39 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11.06.39 #16 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 12:48,187 (768187ms) -> OK

11.06.39 #17 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

11.06.39 #18 Text 0 File Mmc.cpp, Line 19487
Set BUFE: Power-Burn -> ON

11.06.39 #19 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

11.06.39 #20 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11.06.43 #21 Text 0 File Cdrdrv.cpp, Line 1277
11:06:43.370 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.08.09 #22 Text 0 File Cdrdrv.cpp, Line 1277
11:08:09.714 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.08.10 #23 Text 0 File Cdrdrv.cpp, Line 1277
11:08:10.585 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.08.10 #24 Text 0 File Cdrdrv.cpp, Line 1277
11:08:10.665 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.08.10 #25 Text 0 File Cdrdrv.cpp, Line 1277
11:08:10.706 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.08.10 #26 Text 0 File Cdrdrv.cpp, Line 1277
11:08:10.736 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.08.10 #27 Text 0 File Cdrdrv.cpp, Line 1277
11:08:10.786 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.08.10 #28 Text 0 File Cdrdrv.cpp, Line 1277
11:08:10.826 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.08.10 #29 Text 0 File Cdrdrv.cpp, Line 1277
11:08:10.876 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.10.38 #30 Text 0 File Cdrdrv.cpp, Line 1277
11:10:38.588 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.13.07 #31 Text 0 File Cdrdrv.cpp, Line 1277
11:13:07.532 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.15.37 #32 Text 0 File Cdrdrv.cpp, Line 1277
11:15:37.618 - SONY DVD RW DRU-500A\H1 T0 : Queue again later

11.16.58 #33 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x049C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x70 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x05 0x68 0x10 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

11.16.58 #34 CDR -1135 File Writer.cpp, Line 301
Write error

11.16.58 #35 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11.16.59 #36 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

11.16.59 #37 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 356575

11.16.59 #38 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

11.16.59 #39 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

11.16.59 #40 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 1x (1.380 KB/s)


Existing drivers:
File 'Drivers\NeroCD2k.sys': Ver=1.0.0.9, size=44227 bytes, created 16/04/2001 11.54.26
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (099), size=53072 bytes, created 26/07/2003 16.34.34
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1039), size=22201 bytes, created 26/07/2003 16.34.34
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 10/09/2002 13.00.00 (Adapter driver for rec)
File 'Drivers\vobid.sys': Ver=1, 1, 0, 20, size=29239 bytes, created 01/08/2003 14.47.24 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

chi ha qualche idea????

[Beto]

Lo fa anche a me :

ho formattato, messo solo i driver della mobo e gli aggiornamenti xp (tutti)

provato con e senza aspi

sempre mi brucia il dvd

cn errore:
----------------------------------------------------------------------------
14.08.07 #22 Text 0 File Cdrdrv.cpp, Line 1277
14:08:07.031 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

14.09.25 #23 Text 0 File Cdrdrv.cpp, Line 1277
14:09:25.562 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

14.10.05 #24 Text 0 File Cdrdrv.cpp, Line 1277
14:10:05.140 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

14.10.43 #25 SCSI -1024 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04430000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0xD2 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x08 0x03

14.10.43 #26 CDR -1024 File Writer.cpp, Line 301
Communication failure

14.10.44 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

14.10.44 #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

14.10.44 #29 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 53983

14.10.44 #30 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

14.10.44 #31 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

14.10.44 #32 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 1x (1.380 KB/s)
------------------------------------------------------------------------------

Fra 5 minuti riporto il DVD indietro in garanzia visto che le porve le ho fatte tutte, mi manca solo l'nversione dei canali IDE

[bellatryx]

persiste

[Beto]

Ho risolto mettendo il master DVD come master

[bellatryx]

cioe'?

[Beto]

ho un masterizzatore dvd e uno cd (yamaha f1)
prima avevo il mast cd come master e il dvd-r come slave

li ho invertiti ed e' tornato a funzionare.

Siccome pero' ha sempre funzionanto e solo ultimamente mi bruciava i dvd, nel dubbio ho cambiato cavo ide

[bellatryx]

uhm
il fatto e' che lui i CD li masterizza, e' sui DVd che ha dei problemi.... cioe' masterizza anche quelli se li uso coll'instant Cd della Pinnacle e ci sposto e masterizzo i files, il guaio arriva con nero express...
arriva fino alla codifica dei files ma poi non masterizza...
ho tentato di driblare creando il file immagine prima , ma si blocca anche la'...
con vari errori....
''[10:56:24] NeroVision 10.56.21 #37 CDR -1064 File WriterStatus.cpp, Line 164
[10:56:24] NeroVision Invalid block address
[10:56:24] NeroVision
[10:56:24] NeroVision 10.56.21 #38 TRANSFER -24 File WriterStatus.cpp, Line 164
[10:56:24] NeroVision Could not perform end of Disc-at-once
[10:56:24] NeroVision
[10:56:24] NeroVision 10.56.21 #39 Phase 38 File APIProgress.cpp, Line 253
[10:56:24] NeroVision Burn process failed at 1x (1.385 KB/s)''
ho fatto una prova con un minivideo... di 10 secondi e senza menu e quello lo ha fatto.. quindi il problema credo sia del nero...
ma dove sbaglio????

[Beto]

non so

[bellatryx]

allora.. tentando di aggrare il problema...
col nero 6 sono riuscita a creare il DVD su HD...
ora ho ottenuto una bella cartella video-TS ... che contiene i diversi filmati etc etc...
se adesso copio su un supporto DVD questa cartella e chiudo il disco ( usando ul programma Pinnacle. instant write ) ottengo un DVD eseguibile sia sul pc che in un lettore DVD '' normale''????
- sorry ma sto appena iniziando con i DVD -
insomma i files che sono i quella cartella son tutti quelli che servono???
altra domanda:siccome l'errore piu' frequente e' che non avvia il DAO, puo' essere che i dati che ho messo nel DVD siano troppi? sono circa 4.2 giga a progetto finito...secondo la barra del nero..
siccome il DAO serve per l'overburning e il masterizzatore DVD non mi fa l'overburning... era un'idea...

[Beto]

Originariamente inviato da bellatryx
insomma i files che sono i quella cartella son tutti quelli che servono???

si

[Beto]

Originariamente inviato da bellatryx

altra domanda:siccome l'errore piu' frequente e' che non avvia il DAO, puo' essere che i dati che ho messo nel DVD siano troppi? sono circa 4.2 giga a progetto finito...secondo la barra del nero..
siccome il DAO serve per l'overburning e il masterizzatore DVD non mi fa l'overburning... era un'idea...

no non e' cosi come dici....
usa programmi piu easy come sonic record now dx 4.60