Aiuto per utillity bios

[prodan]

raga conoscete un programmino per riesumare un bios ami del tipo sotto riportato?


AMIBIOS Motherboard Manufacturer Identification
Version 2.0 (06/30/2003) Copyright 2003 American Megatrends, Inc.

This file has recorded information useful in identifying the manufacturer
of this motherboard. The information is listed below:

An AMIBIOS ID String Was Detected:
51-1024-001437-00111110-071595-I430TX
- ---- ------ ------
| | | |
| | | Chipset/BIOS Info
| | BIOS Build Date
| Manufacturer ID
BIOS ROM Information
AMIBIOS ROM Size: 128 KB
BIOS Build Date: Jul 15 1995
Motherboard Manufacturer Code Detected: 1437 - Hsing Tech Enterprise Co., Ltd.
Please Consults Hsing Tech Enterprise Co., Ltd. for support

For more information on upgrading your BIOS go to http://www.ami.com/support/bios.cfm?refer=mbid
-------------------------------------------------------------------------------
SMBIOS info:
NO SMBIOS DATA AVILABLE

-------------------------------------------------------------------------------
AMIDIAG Suite tests and diagnoses every hardware subsystem on your PC!
A professional tool for developers, manufacturers and technicians.
Go to www.amidiag.com for more information on AMIDiag.


Praticamnete utilizzando il nuovo tool per aggiornare il bios l'ho ucciso mentre le volte precedente che l'ho fatto ero in DOS avviavo l'utility e richiamavo laROM del BIOS.
ma stò giro, prorpio bo!
è un bel pò che me fà sti bep e quando ne fà tre dovrebbe esser finitocosì dice l'istruzione del tool


Quick Flash Instructions For AMI Motherboards:
(FLASH UTILITY NOT REQUIRED)


- Unzip file, copy the "ROM" file to a diskette in "A" drive.
(Diskette does not have to be bootable).

- Make sure you are using the on board floppy controller.

- With system powered off and diskette with "ROM" file in "A" drive.

- Hold down on the "CTRL & HOME" keys and then power on system.

- There will be no video and notice floppy drive being accessed.

- You should hear 1 beep let go of keys.

- Then you will hear 2 beeps and then 3 beeps.

- System should reset and notice new BIOS release date at top of screen.

- Enter BIOS SETUP run the OPTIMAL SETINGS OPTION.

- Change BIOS SETTINGS for your configuration.


"WARNING"
If you are using the "password" option in the BIOS, you must DISABLE the
Password BEFORE you flashes the BIOS. This BIOS uses a new core and saves the
Password at a different location.

If you flash the BIOS without disabling the password, you may not be able
To get into the setup. If this happens, you must drain the CMOS first.


**November 9, 2000**




infatti mi cerca il floppy e suiona due volte ma che caspita faccio se non finisce mai!
Tiro il PC nel fiume sotto casa?

Manca l'elettrocardio gramma piatto! il suono è quello!

bep..bep....bep..bep........