Help config cisco soh 77 con alice

[RAdish]

Salve a tutti,
Ho questo router e sto cercando di configurarlo corretamente per alice mega.(ppoe ip dinamico).

sono riuscito a configurarlo in modo da poter navigare, pero' ho problemi :
- a eseguire comandi su ftp
-entrare su ftp in modo attivo(in modo passivo a volte funziona)
- configurarlo in modo che emule funzioni corretamente(ho aperto le porte richieste ma continua a darmi lowid).


Accetto anche altri consigli per migliorare la mia config.(sicuramente avro' fatto delle cazzate!).

Ringrazio quanti mi aiuteranno, anche perche' dopo 1 mese di prove spero di risolvere la questione.

 
Current configuration : 2068 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname R4dish
!
enable secret 5 XXX
enable password 7 XXX
!
username Cisco privilege 15 password 7 XXX
ip subnet-zero
ip name-server 213.92.5.54
ip name-server 194.20.8.1
ip name-server 62.100.65.2
ip name-server 62.100.65.8
!
!
!
!
interface Ethernet0
 ip address 192.168.0.99 255.255.255.0
 ip nat inside
 no ip mroute-cache
 no cdp enable
 hold-queue 100 out
!
interface ATM0
 no ip address
 ip access-group 101 in
 no ip route-cache
 no ip mroute-cache
 no atm auto-configuration
 no atm ilmi-keepalive
 pvc 8/35
  encapsulation aal5mux ppp dialer
  pppoe-client dial-pool-number 1
 !
 dsl operating-mode auto
 hold-queue 224 in
!
interface ATM0.1 point-to-point
ip access-group 101 in
 ip nat outside
 no ip route-cache
 no ip mroute-cache
!
interface Dialer1
 ip address negotiated
 ip mtu 1492
 ip nat outside
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 ppp authentication pap callin
 ppp chap hostname USER_ALICE
 ppp chap password 7 XXX
 ppp pap sent-username USER_ALICE password 7 XXX
!
ip nat inside source list 10 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
ip pim bidir-enable
!
access-list 10 permit 192.168.0.0 0.0.0.255
access-list 101 permit udp any eq domain any
access-list 101 permit tcp any eq ftp-data any
access-list 101 permit tcp any eq 1214 any
access-list 101 permit udp any eq 1214 any
access-list 101 permit udp any eq 6257 any
access-list 101 permit tcp any eq 4662 any
access-list 101 permit udp any eq 4672 any
access-list 101 permit tcp any any established
access-list 101 deny   ip any any
access-list 101 permit udp any eq domain host 192.168.0.1 gt 1023
access-list 101 permit tcp any eq ftp-data host 192.168.0.1 gt 1023
!
line con 0
 logging synchronous
 stopbits 1
line vty 0 4
 password 7 XXX
 login
!
scheduler max-task-time 5000
end

[RAdish]

up

[RAdish]

nessuno sa aiutarmi?

[The Wise]

UP serve anche a me

[folken]

Per aprire le porte con emule, prova a configurare il dialer 1 così:

ip nat inside source static tcp (IP da nattare) 4662 interface dialer 1 4662.
Lo stesso per udp.
Ciao