WINTV PCI 88x chip

[Krakz]

ho un problema ho installato credo correttamente i driver per la mia wintv

ma quando avvio xawtv mi da "segment fault"


qualcuno mi puo aiutare

[lovaz]

Non avra' questo chip, vero?

http://bytesex.org/cx88/

nel qual caso il driver e' ancora in alpha, si vede in bianco e nero, ecc, ecc.

[Krakz]

lo so
il mio problema che non vedo manco il bianco e ne il nero









una volta ho aperto un 3d su questo argomento ma non lo trovo piu





PS : che te ridi ?

[lovaz]

Ah, ora ricordo...
Come li hai installati i driver?

[Krakz]

make
make install

cmq ora harddrake mi dice che è caricato il modulo

[pfist]

Se non riesci a risolvere ti consiglio di provare Zapping.
Per me e' molto meglio di Xawtv.

http://zapping.sourceforge.net

Ciao.

[Krakz]

fatto ma non prende nulla

[root@localhost krakz]# zapping_setup_fb
(C) 2000-2003 Iñaki G. Etxebarria, Michael H. Schimek.
This program is freely redistributable under the terms
of the GNU General Public License.

Using video device '/dev/video0', display ':0.0'.
Querying frame buffer parameters from DGA.
zapping_setup_fb:zapping_setup_fb.c:191: Cannot stat device '/dev/video0': 2, No such file or directory.
zapping_setup_fb:zapping_setup_fb.c:191: Cannot stat device '/dev/video0': 2, No such file or directory.
zapping_setup_fb:zapping_setup_fb.c:191: Cannot stat device '/dev/video0': 2, No such file or directory.
Setup failed.
[root@localhost krakz]#

[lovaz]

Che device hai sotto /dev/video?
xawtv ha un'opzione per passargli il device

[Krakz]

[krakz@localhost krakz]$ xawtv -hwscan
This is xawtv-3.88, running on Linux/i686 (2.4.22-6mdk)
looking for available devices
port 77-77
type : Xvideo, image scaler
name : NV10 Video Overlay

port 78-109
type : Xvideo, image scaler
name : NV05 Video Blitter

port 110-110 [ -xvport 110 ]
type : Xvideo, video overlay
name : NVIDIA Video Interface Port

[krakz@localhost krakz]$


il problema che non ho nulla sotto /dev/video

[lovaz]

Puoi postare
ls -l /dev |grep video
?

[Krakz]

[root@localhost krakz]# ls -l /dev |grep video
[root@localhost krakz]#

[lovaz]

lsmod?

[Krakz]

[root@localhost krakz]# lsmod /dev |grep video
[root@localhost krakz]#



cmq non ho capito cosa volevi dire










NB : da come puoi capire sono un utonto linux =))

[Krakz]

[root@localhost krakz]# lsmod
Module Size Used by Tainted: P
nls_cp850 4284 0 (autoclean)
msdos 7564 0 (autoclean)
vfat 12012 0 (autoclean)
fat 36760 0 (autoclean) [msdos vfat]
nls_iso8859-15 4060 0 (autoclean)
udf 89952 0 (autoclean)
sg 35100 0 (autoclean)
ppp_synctty 7424 1 (autoclean)
ppp_generic 23908 3 (autoclean) [ppp_synctty]
slhc 6596 0 (autoclean) [ppp_generic]
n_hdlc 7488 1
agpgart 47524 3 (autoclean)
nvidia 1765440 11 (autoclean)
binfmt_misc 7084 1
lp 8128 0
parport_pc 25352 1
parport 34376 1 [lp parport_pc]
snd-seq-midi 4800 0 (autoclean) (unused)
snd-opl3-synth 12616 0 (autoclean) (unused)
snd-seq-instr 7204 0 (autoclean) [snd-opl3-synth]
snd-seq-midi-emul 6828 0 (autoclean) [snd-opl3-synth]
snd-ainstr-fm 2960 0 (autoclean) [snd-opl3-synth]
snd-seq-oss 31808 0 (unused)
snd-seq-midi-event 6016 0 [snd-seq-midi snd-seq-oss]
snd-seq 42320 2 [snd-seq-midi snd-opl3-synth snd-seq-instr snd-seq-midi-emul snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 43428 0
snd-mixer-oss 14232 1 [snd-pcm-oss]
snd-cmipci 23448 1
snd-pcm 78692 0 [snd-pcm-oss snd-cmipci]
snd-page-alloc 8948 0 [snd-pcm]
snd-mpu401-uart 4608 0 [snd-cmipci]
snd-rawmidi 17664 0 [snd-seq-midi snd-mpu401-uart]
snd-opl3-lib 7908 0 [snd-opl3-synth snd-cmipci]
snd-timer 18276 0 [snd-seq snd-pcm snd-opl3-lib]
snd-seq-device 5672 0 [snd-seq-midi snd-opl3-synth snd-seq-oss snd-seq snd-rawmidi snd-opl3-lib]
snd-hwdep 6240 0 [snd-opl3-lib]
snd 40836 4 [snd-seq-midi snd-opl3-synth snd-seq-instr snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci snd-pcm snd-mpu401-uart snd-rawmidi snd-opl3-lib snd-timer snd-seq-device snd-hwdep]
soundcore 6308 0 [snd]
ipt_state 1048 69 (autoclean)
ipt_REJECT 3928 4 (autoclean)
ipt_limit 1496 6 (autoclean)
ipt_LOG 4120 6 (autoclean)
ip_conntrack_irc 4336 0 (unused)
ip_conntrack_ftp 5200 0 (unused)
ip_conntrack 26212 3 [ipt_state ip_conntrack_irc ip_conntrack_ftp]
iptable_filter 2316 1 (autoclean)
ip_tables 15072 5 [ipt_state ipt_REJECT ipt_limit ipt_LOG iptable_filter]
af_packet 14824 0 (autoclean)
floppy 55516 0
keybdev 2724 0 (unused)
mousedev 5460 0 (unused)
isofs 28468 0 (autoclean)
supermount 83040 3 (autoclean)
sr_mod 19384 0 (autoclean)
hid 24068 0 (unused)
input 5632 0 [keybdev mousedev hid]
ide-cd 33732 0
cdrom 32768 0 [sr_mod ide-cd]
ide-scsi 11152 0
scsi_mod 105632 3 [sg sr_mod ide-scsi]
usb-uhci 25040 0 (unused)
usbcore 74476 1 [hid usb-uhci]
rtc 8940 0 (autoclean)
ext3 59920 2
jbd 38624 2 [ext3]

[lovaz]

/sbin/lsmod
per vedere i moduli caricati

[lovaz]

Non vedo moduli strani...
Prova a vedere sotto /lib/modules se c'e' il famigerato modulo e prova a caricarlo con modprobe nomemodulo (senza .o)

[Krakz]

[krakz@localhost krakz]$ ls /lib/modules
2.4.21-0.13mdk/ 2.4.21-0.25mdk/ 2.4.22-6mdk/ 2.4.22-6mdkcustom/
[krakz@localhost krakz]$

[lovaz]

prova
modprobe cx88

[Krakz]

[root@localhost krakz]# modprobe cx88
modprobe: Can't locate module cx88
[root@localhost krakz]#



NB : HARDRAKE mi segnala che la wintv ha il modulo cx88 caricato

[Krakz]

[root@localhost krakz]# v4l-conf
v4l-conf: using X11 display :0.0
dga: version 2.0
mode: 1024x768, depth=16, bpp=16, bpl=2048, base=0xf0000000
can't open /dev/video0: No such file or directory
[root@localhost krakz]# v4l-info
open /dev/video0: No such file or directory
[root@localhost krakz]#



e come se manca quel device O_O