Problemi col DSP, HELP!

[energy+]

Ciao a tutti gli espertoni e a quelli -,ho un problema con la mia SINXP riguardante l'audio integrato,in pratica sia sotto Slack 9.0 che sotto MDK 9.0 nn mi riconosce il DPS anche se la scheda audio sembra la conosca infatti è una realtec AC'97 xcui nn dovrebbe avere prob in teoria.......

Qlche consiglio x farla partire?

Ciao e grazie

[energy+]

UP!

Help plz!

[ilsensine]

Mandami queste informazioni:
- i messaggi d'avvio del kernel (dmesg > messaggi.txt)
- l'output di lspci -v e lspci -n
- il file /etc/modules.conf
- che distribuzione stai usando

[energy+]

Sto usando Slackware 9.0 e MDK 9.0 ed entrambe mi danno lo stesso tipo di errore che dovrebbe citare + o - così:
Unable to locate /dev/dsp........

poi dice che gli assegna il null output,cmq quando vado a casa ci guardo e ti faccio sapere domani,grazie x l'aiuto

[energy+]

Ecco qua l'output che mi avevi richiesto: dmesg


Linux version 2.4.20 (root@midas) (gcc version 3.2.2) #2 Mon Mar 17 22:02:15 PST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Slackware ro root=306
Initializing CPU#0
Detected 2840.785 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 5675.41 BogoMIPS
Memory: 256180k/262080k available (1733k kernel code, 5512k reserved, 568k data, 112k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfafd0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1039/0655] at 00:00.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vesafb: framebuffer at 0xe8000000, mapped to 0xd080d000, size 131072k
vesafb: mode is 800x600x16, linelength=1600, pages=135
vesafb: protected mode interface info at c000:575a
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS5513
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
hda: Maxtor 6Y060L0, ATA DISK drive
hdc: 4X4X32, ATAPI CD/DVD-ROM drive
hdd: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 50X CD-ROM drive, 128kB Cache
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 3264.000 MB/sec
32regs : 2009.200 MB/sec
pIII_sse : 3680.800 MB/sec
pII_mmx : 3225.200 MB/sec
p5_mmx : 3174.400 MB/sec
raid5: using function: pIII_sse (3680.800 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(22/07/2002)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 112k freed
Adding Swap: 393552k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Intel(R) PRO/1000 Network Driver - version 4.4.12-k1
Copyright (c) 1999-2002 Intel Corporation.
eth0: Intel(R) PRO/1000 Network Connection
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
hcd.c: ehci-hcd @ 00:03.3, PCI device 1039:7002 (Silicon Integrated Systems [SiS])
hcd.c: irq 11, pci mem d8892000
usb.c: new USB bus registered, assigned bus number 1
ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
hub.c: USB hub found
hub.c: 6 ports detected
usb-ohci.c: USB OHCI at membase 0xd889a000, IRQ 11
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xd889c000, IRQ 9
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xd889e000, IRQ 5
usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] 7001 (#3)
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
Intel 810 + AC97 Audio, version 0.21, 15:37:49 Mar 11 2003
i810: SiS 7012 found at IO 0xdc00 and 0xd800, IRQ 9
i810_audio: Audio Controller supports 6 channels.
ac97_codec: AC97 Audio codec, id: 0x414c:0x4720 (Unknown)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
hub.c: new USB device 00:03.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0xaec/0x5010) is not claimed by any active driver.
usb-uhci.c: $Revision: 1.275 $ time 15:38:38 Mar 11 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
hub.c: new USB device 00:03.2-2, assigned address 2
scsi2 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: Ttraveling Disk Rev: 1.11
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
SCSI device sda: 128768 512-byte hdwr sectors (66 MB)
sda: Write Protect is off
sda: sda1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
FAT: bogus logical sector size 20487
VFS: Can't find a valid FAT filesystem on dev 08:00.
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 20487
VFS: Can't find a valid FAT filesystem on dev 08:00.
FAT: bogus logical sector size 20487
VFS: Can't find a valid FAT filesystem on dev 08:00.

Questo è il risultato di lspci -n

00:00.0 Class 0600: 1039:0655 (rev 10)
00:01.0 Class 0604: 1039:0002
00:02.0 Class 0601: 1039:0008 (rev 04)
00:02.5 Class 0101: 1039:5513
00:02.7 Class 0401: 1039:7012 (rev a0)
00:03.0 Class 0c03: 1039:7001 (rev 0f)
00:03.1 Class 0c03: 1039:7001 (rev 0f)
00:03.2 Class 0c03: 1039:7001 (rev 0f)
00:03.3 Class 0c03: 1039:7002
00:0f.0 Class 0200: 8086:100e (rev 02)
01:00.0 Class 0300: 1002:4966 (rev 01)
01:00.1 Class 0380: 1002:496e (rev 01)


Questo è il risultato di lspci -v

00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0655 (rev 10)
Subsystem: Silicon Integrated Systems [SiS]: Unknown device 0655
Flags: bus master, medium devsel, latency 32
Memory at e0000000 (32-bit, non-prefetchable) [size=128M]
Capabilities: [c0] AGP version 2.0

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: e8000000-f7ffffff

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 04)
Flags: bus master, medium devsel, latency 0

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 88 [Master SecP])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Flags: bus master, medium devsel, latency 128
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at f000 [size=16]

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: Giga-byte Technology: Unknown device a002
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at d800 [size=256]
I/O ports at dc00 [size=128]
Capabilities: [48] Power Management version 2

00:03.0 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] SiS7001 USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at fa023000 (32-bit, non-prefetchable) [size=4K]

00:03.1 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] SiS7001 USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at fa020000 (32-bit, non-prefetchable) [size=4K]

00:03.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] SiS7001 USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at fa021000 (32-bit, non-prefetchable) [size=4K]

00:03.3 USB Controller: Silicon Integrated Systems [SiS] SiS7002 USB 2.0 (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at fa022000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2

00:0f.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
Subsystem: Intel Corp.: Unknown device 3013
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at fa000000 (32-bit, non-prefetchable) [size=128K]
I/O ports at e000 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device.
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If [Radeon 9000] (rev 01) (prog-if 00 [VGA])
Subsystem: PC Partner Limited R250 If [Sapphire Radeon 9000 Pro]
Flags: bus master, stepping, 66Mhz, medium devsel, latency 32, IRQ 5
Memory at e8000000 (32-bit, prefetchable) [size=128M]
I/O ports at c000 [size=256]
Memory at f9000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2

01:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon 9000] (Secondary) (rev 01)
Subsystem: PC Partner Limited: Unknown device 7177
Flags: bus master, stepping, 66Mhz, medium devsel, latency 32
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at f9010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2

Il file modules.conf è vuoto xcui ho stampato il modules.devfs

# /etc/modules.devfs
# Richard Gooch <rgooch@atnf.csiro.au> 24-MAR-2002
#
# THIS IS AN AUTOMATICALLY GENERATED FILE. DO NOT EDIT!!!
# THIS FILE WILL BE OVERWRITTEN EACH TIME YOU INSTALL DEVFSD!!!
# Modify /etc/modules.conf instead.
# This file comes with devfsd-vDEVFSD-VERSION which is available from:
# http://www.atnf.csiro.au/~rgooch/linux/
# or directly from:
# ftp://ftp.atnf.csiro.au/pub/people/rgooch/linux/daemons/devfsd-vDEVFSD-VERSION.tar.gz

###############################################################################
# Sample configurations that you may want to place in /etc/modules.conf
#
#alias sound-slot-0 sb
#alias /dev/v4l bttv
#alias /dev/misc/watchdog pcwd
#alias gen-md raid0
#alias /dev/joysticks joystick
#probeall scsi_hostadapter sym53c8xx

###############################################################################
# Generic section: do not change or copy
#
# All HDDs
probeall /dev/discs scsi_hostadapter sd_mod ide-probe-mod ide-disk ide-floppy DAC960
alias /dev/discs/* /dev/discs

# All CD-ROMs
probeall /dev/cdroms scsi_hostadapter sr_mod ide-probe-mod ide-cd cdrom
alias /dev/cdroms/* /dev/cdroms
alias /dev/cdrom /dev/cdroms

# All tapes
probeall /dev/tapes scsi_hostadapter st ide-probe-mod ide-tape
alias /dev/tapes/* /dev/tapes

# All SCSI devices
probeall /dev/scsi scsi_hostadapter sd_mod sr_mod st sg

# All IDE devices
probeall /dev/ide ide-probe-mod ide-disk ide-cd ide-tape ide-floppy

# IDE CD-ROMs
alias /dev/ide/*/cd ide-cd

# SCSI HDDs
probeall /dev/sd scsi_hostadapter sd_mod
alias /dev/sd* /dev/sd

# SCSI CD-ROMs
probeall /dev/sr scsi_hostadapter sr_mod
alias /dev/sr* /dev/sr
alias /dev/scsi/*/cd sr_mod

# SCSI tapes
probeall /dev/st scsi_hostadapter st
alias /dev/st* /dev/st
alias /dev/nst* /dev/st

# SCSI generic
probeall /dev/sg scsi_hostadapter sg
alias /dev/sg* /dev/sg
alias /dev/scsi/*/generic /dev/sg
alias /dev/pg /dev/sg
alias /dev/pg* /dev/sg

# Floppies
alias /dev/floppy floppy
alias /dev/fd* floppy

# RAMDISCs
alias /dev/rd rd
alias /dev/ram* rd

# Loop devices
alias /dev/loop* loop

# Meta devices
alias /dev/md* gen-md

# Parallel port printers
alias /dev/printers* lp
alias /dev/lp* /dev/printers

# Soundcard
alias /dev/sound sound-slot-0
alias /dev/audio /dev/sound
alias /dev/mixer /dev/sound
alias /dev/dsp /dev/sound
alias /dev/dspW /dev/sound
alias /dev/midi /dev/sound

# Joysticks
alias /dev/js* /dev/joysticks

# Serial ports
alias /dev/tts* serial
alias /dev/ttyS* /dev/tts
alias /dev/cua* /dev/tts

# Input devices
alias /dev/input/mouse* mousedev

# Miscellaneous devices
alias /dev/misc/atibm atixlmouse
alias /dev/misc/inportbm msbusmouse
alias /dev/misc/logibm busmouse
alias /dev/misc/rtc rtc
alias /dev/misc/agpgart agpgart
alias /dev/rtc /dev/misc/rtc

# PPP devices
alias /dev/ppp* ppp_generic

# Video capture devices
alias /dev/video* /dev/v4l
alias /dev/vbi* /dev/v4l

# agpgart
alias /dev/agpgart agpgart
alias /dev/dri* agpgart

# Irda devices
alias /dev/ircomm ircomm-tty
alias /dev/ircomm* /dev/ircomm

# Raw I/O devices
alias /dev/rawctl /dev/raw


# Pull in the configuration file. Do this last because modprobe(8) processes in
# per^H^H^Hreverse order and the sysadmin may want to over-ride what is in the
# generic file
include /etc/modules.conf

Grazie in anticipo x l'aiuto e la risposta che mi darai

[ilsensine]

Ok
Ora prova a eseguire questo comando da utente root:
modprobe snd-intel8x0
oppure (se il precedente da un errore di modulo non trovato)
modprobe snd-card-intel8x0
e dimmi se ci sono errori.
Già che ci sei, postami pure l'uscita del comando /sbin/lsmod, giusto per scrupolo...

[energy+]

Ok ti ringrazio stasera ci provo e ti faccio sapere

Ciao

[ilsensine]

Ah no aspetta, ho letto ora questo:

Intel 810 + AC97 Audio, version 0.21, 15:37:49 Mar 11 2003
i810: SiS 7012 found at IO 0xdc00 and 0xd800, IRQ 9
i810_audio: Audio Controller supports 6 channels.
ac97_codec: AC97 Audio codec, id: 0x414c:0x4720 (Unknown)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6

Un driver audio è già stato caricato, a quanto pare senza problemi. E' forse un più banale problema di configurazione; oltre a lsmod, dimmi cosa riportano questi comandi:
ls -l /dev/dsp
ls -l /dev/sound/*
Potrebbe essere un difetto nei permessi o un link mancante.

[energy+]

Eh già è proprio quello che pensavo xchè i driver li carica e riconosce la periferica perfettamente infatti dentro al centro di controllo di kde mi dice che ho una scheda audio con chip realtek AC'97 esattamente come è in realtà xò cmq in ingresso nell'ambiente grafico mi dice che nn può caricare o trovare /dev/dsp.

Questa cosa strana tra l'altro succede sia su mdk che su slack 9 ugualmente xcui pensavo ci fossero problemi nel riconoscimento del dsp e nn della sk audio.

Grazie x l'aiuto,ti farò sapere.....

[energy+]

Eccoti l'out di lsmod:
Module Size Used by Not tainted
usb-storage 60116 1
i810_audio 21160 1
ac97_codec 9512 0 [i810_audio]
soundcore 3332 2 [i810_audio]
usb-ohci 18856 0 (unused)
ehci-hcd 14632 0 (unused)
usbcore 58144 1 [usb-storage usb-ohci ehci-hcd]
pcmcia_core 38112 0
ide-scsi 8048 0
e1000 49836 0

..... e di /dev/dsp

crw-rw--w- 1 root sys 14, 3 Jul 18 1994 /dev/dsp

/dev/sound è vuoto........

La diagnosi dottore?
Ho trovato dei driver x linux direttamente alla realtek,in pratica sono degli alsa ma col cavolo che si installano,già al tar danno errore!
Possiamo risistemare la situazione con quello che c'è?

Ciao e grazie

[ilsensine]

Originally posted by "energy+"


..... e di /dev/dsp

crw-rw--w- 1 root sys 14, 3 Jul 18 1994 /dev/dsp

Oh bella, com'è questi permessi?
Prova con:
chmod 666 /dev/dsp

/dev/sound è vuoto........

Mi stona, ma mdk dovrebbe usare il devfs, che implicherebbe che /dev/sound non dovrebbe essere vuota e /dev/dsp dovrebbe essere un link a un file dentro /dev/sound.

Ho trovato dei driver x linux direttamente alla realtek,in pratica sono degli alsa ma col cavolo che si installano,già al tar danno errore!

Gli alsa stanno pure nella mdk; cmq il driver i810_audio è il driver alternativo oss, visto che viene caricato _deve_ funzionare.

[energy+]

Scusa questi sono i mess della Slack!

Cmq è quello che pensavo anch'io.....

Ti farò sapere

[energy+]

Ciao ilsensine,ho provato a cambiare i perms con chmod e quell'errore nn me l'ha + dato xò andando ad utilizzare il suono poi mi da un'altro errore cioè "Troppe richieste al processore" o qlcosa di molto simile.

Ho provato su tutte e 2 le distro e niente stesso prob............

Diagnosi?

Ciao e grazie tante x l'aiuto

[ilsensine]

Boh presumo che quel messaggio lo dia artsd.
Giusto per vedere se il driver funziona...prova a lanciare un programma che usa direttamente /dev/dsp; ad es. xmms con plugin di uscita OSS.

[energy+]

Avevi ragione xmms xon il plug-in oss funziona,come faccio a far funzionare anche il resto? + che altro ce la si fa?

Avrei anche un'altro problemino coi cd.......
In pratica nn mi monta i cd in automatico,ho provato ad editare fstab tra l'altro corretto,ma nn c'è niente da fare allora ho tolto il mount dei cd da fstab e ho detto "lo faccio a mano!",ma niente anche così..........
Praticamente al comando mount /dev/hdd /mnt/cdrom -t iso9660 -o ro
mi dà l'errore: bad filesystem type or too many filesystem mounted,+ o - dovrebbe essere così,qlche idea?

Ciao e grazie di tutto

[ilsensine]

Originally posted by "energy+"

Avevi ragione xmms xon il plug-in oss funziona,come faccio a far funzionare anche il resto? + che altro ce la si fa?

La cosa migliore sarebbe far funzionare artsd, ma non ho idea del perché non funzioni...prova a cambiare qualche impostazione tramite il centro di controllo kde

Praticamente al comando mount /dev/hdd /mnt/cdrom -t iso9660 -o ro
mi dà l'errore: bad filesystem type or too many filesystem mounted,+ o - dovrebbe essere così,qlche idea?

1) non hai messo il cd
2) è un cd audio
3) Il dispositivo usa l'emulazione scsi (puoi escludere questa ipotesi eseguendo eject /dev/hdd; se ti si apre allora è ok hdd)

[energy+]

Va bene che x certe configurazioni nn sono esperto ma di sicuro nn faccio il mount senza il cd e neanche di un'altra periferica!
Il cd è sullo slave del secondo canale IDE xcui è hdd e cmq viene scritto anche nei messaggi di post iniziali,ho guard anche dmesg x essere sicuro e la periferica è quella!

Mah,adesso provo a vedere se va il masterizzatore tramite lo scsi.........

PS I cd audio nn li puoi montare con filesystem iso? con quale allora?

[ilsensine]

Originally posted by "energy+"


PS I cd audio nn li puoi montare con filesystem iso? con quale allora?

I cd audio _non_ sono file system iso, semplicemente. Si leggono solo con i programmi appositi, oppure con un driver particolare chiamato cdfs, ma è un pò che non viene aggiornato e non so se funziona ancora.

[Icedguardian]

Non puoi cascarmi su una cagata simile, i CD audio si ascoltano e basta

Non c'è bisogno di montarli basta un prog che li legga.

Ciao

[energy+]

Ok ma allora x sentire un cd audio dovresti in pratica caricare direttamente da /dev/hdx,no?

Possibile che nn si possono montare? Ci son rimasto male......

Ciao e grazie x l'aiuto cmq