Upgrade Speakers Laptop

[sicily428]

c'è una guida interessante per l'upgrade degli speakers interni di un clevo PS157SM
http://forum.notebookreview.com/thre...eakers.802073/


To anyone who plans on making this kind of project here are some things you NEED to consider and do.
- You need a multimeter to check the resistance of the speakers.
- You need to open a lot of things to get to the speakers, you will need the knowledge to literally take your whole notebook appart.
- Most speakers have 4ohm resistance, if you have speakers who have more or less resistance DO NOT attempt to try it out, you risk blowing the speakers and maybe even short your mainboard.
- You need a solder station because it's very likely you need to connect cables with each other, be aware that you need to connect it properly otherwise you will short your board. (ground is ALWAYS black, so connect black with black and the other color with whatever the other color is)
- Measure your room you have in your case. In my case the room for subwoofer and speakers are VERY limited, so you need to get speakers who can fit unless u plan on making case modding.
- Make sure you get some fluffy things under your subwoofer / Speakers (either in the actual box or outside), because otherwise they will vibrate and distort sound heavily on higher volume.
- You NEED to create your own custom speaker boxes (THIS IS A MUST). If you don't build proper speaker boxes,your sound will be VERY tinny and poor.
- When testing a speaker or sound after you're done, try the sound stepwise, if you hear that your sound is tearing, you need to fix some things.

https://www.youtube.com/watch?v=rj6KyCrj79g



secondo voi la cosa è fattibile anche su altri modelli?

[sicily428]

un test della macchina dopo l'upgrade
https://vimeo.com/209989880