Cisco 887VA-K9 Telecom Fibra 100

[darkosx]

Buonasera ragazzi, è un pò di giorni che sto provando a configurare un cisco 887va-k9 sulla vdsl2 a 100mega di telecom con la tuttofibra. Lasciando perdere il problema del voip che ho bypassato, non riesco a far funzionare il cisco in nessun modo. Ho aggiornato firmware vdsl per il supporto al vectoring, si allinea ma non scambia dati... Vi allego la conf tante le volte qualcuno mi riuscisse a dare una mano...

!
! No configuration change since last restart
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Network
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone Rome 1 0
clock summer-time Rome recurring last Sun Mar 2:00 last Sun Oct 3:00
network-clock-participate wic 0
!
!
!
!
!
no ip dhcp conflict logging
!
ip dhcp pool dpool1
network 192.168.1.0 255.255.255.0
domain-name aYodia.local
dns-server 192.168.1.1 8.8.8.8 8.8.4.4
default-router 192.168.1.1
!
!
!
ip cef
no ipv6 cef
!
!
!
!
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
license udi pid C887VA-V-K9 sn XXXXXXXXXXXX
!
!
!
!
!
!
!
controller VDSL 0
firmware filename flash:VA_A_38k1_B_38h_24g1.bin
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0
no ip address
!
interface Ethernet0.835
encapsulation dot1Q 835
pppoe enable group global
pppoe-client dial-pool-number 1
!
interface ATM0
no ip address
no ip route-cache
shutdown
no atm ilmi-keepalive
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
no ip address
!
interface FastEthernet3
no ip address
!
interface Vlan1
ip address pool dpool1
ip nat inside
ip tcp adjust-mss 1452
ip virtual-reassembly in
!
!
interface Dialer1
mtu 1492
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp chap hostname [SERIALMODEMTECHINICOLOR-MACADDR_PRIMI_6_CARATTERI]@alicebiz.routed
ppp chap password 0 alicenewag
ppp pap sent-username [SERIALMODEMTECHINICOLOR-MACADDR_PRIMI_6_CARATTERI]@alicebiz.routed password 0 alicenewag
ppp ipcp dns request accept
no cdp enable
!
ip forward-protocol nd
ip http server
no ip http secure-server
!
ip nat inside source list 1 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1 permanent
!
dialer-list 1 protocol ip permit
!
access-list 1 permit ip 192.168.1.0 0.0.0.255
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
login
transport input all
!
ntp server it.pool.ntp.org prefer
!
end

Ho un technicolor che ha 2 seriali uno TI SN e l'altro SN e non so quale usare dei due pur avendoli provati entrambi non sono riuscito a navigare. Grazie in anticipo

[sergio.pg]

Prova a configurare l'indirizzo ip all'interfaccia vlan 1

ip dhcp excluded-address 192.168.1.1
interface Vlan1
ip address 192.168.1.1 255.255.255.0

EDIT:
aggiungi anche

interface Dialer1
ppp authentication pap chap callin