Torna indietro   Hardware Upgrade Forum > Networking e sicurezza > Networking > Networking in generale

Samsung Micro RGB R95H, il primo LCD a LED rossi, verdi e blu di Samsung alla prova del banco di misura
Samsung Micro RGB R95H, il primo LCD a LED rossi, verdi e blu di Samsung alla prova del banco di misura
Il primo Micro RGB di Samsung per il salotto è il 65 pollici da 2.749 euro. Sul banco di misura abbiamo rilevato 2.000 nit di picco, nero assoluto con il local dimming e il 91,4% del BT.2020, il colore più ampio che abbiamo misurato su un LCD
iPhone 18 Pro: la recensione del miglior iPhone compatto di sempre
iPhone 18 Pro: la recensione del miglior iPhone compatto di sempre
Apple ha rinnovato iPhone 18 Pro soprattutto dentro: chip A20 Pro a 2 nm con memoria affiancata al SoC, camera di vapore tre volte più ampia, Dynamic Island più piccola del 25% grazie a Face ID sotto il display e fotocamera principale con diaframma variabile da f/1.48 a f/4. Lo abbiamo misurato al colorimetro e nei benchmark, usato con iOS 27 e messo alla prova in fotografia tra laghi, borghi e interni poco illuminati
Panasonic, 30 anni di Toughbook: la "Bibbia" di mille regole dietro i nuovi G3 e 34
Panasonic, 30 anni di Toughbook: la "Bibbia" di mille regole dietro i nuovi G3 e 34
A Londra, per il trentennale dei Toughbook, Panasonic ha presentato il tablet G3 e il 2-in-1 34. Con Jon Tucker, a capo dell'ingegneria europea, abbiamo parlato di ciò che non si vede: batterie, antenne, porte seriali e accorgimenti nati sul campo
Tutti gli articoli Tutte le news

Vai al Forum
Rispondi
 
Strumenti
Old 08-01-2017, 17:56   #1
Cat383
Junior Member
 
Iscritto dal: Apr 2011
Messaggi: 4
Rete Alice instabile...cosa posso fare?

Buonasera

Ho una rete ADSL Alice con un Modem-Router Wifi Asus DSL-N55U, ogni telefono della casa con filtro dedicato e nessun impianto d'allarme o simili.

Facendo uno Speedtest il risultato è questo:


Ho però problemi di stabilità che, chiamando l'assistenza, telefonicamente non rilevano. Oggi ho provato ad aggiornare il FW del Asus (mettendo la versione firmware:9.0.0.4.380_3925) per vedere se migliorava, ma nulla da fare.

I problemi che riscontro sono praticamente tre:
- quando ricevo una telefonata la linea cade
- random (o, comunque, non son riuscito ad associare il problema ad una situazione) ci sono cadute della linea improvvise che durano da qualche secondo a qualche minuto. In alcuni casi, soprattutto quando non ho il tempo di aspettare, faccio il riavvio del router e ritorna la connessione
- random (o, comunque, non son riuscito ad associare il problema ad una situazione) ci sono rallentamenti tali da rendere quasi impossibile la navigazione


Non so se può servire a qualcosa il registro di sistema fatto oggi dopo il riavvio del router post aggiornamento...comunque è questo:
Quote:
Aug 1 02:00:12 syslogd started: BusyBox v1.17.4
Aug 1 02:00:12 kernel: klogd started: BusyBox v1.17.4 (2016-07-28 21:27:37 CST)
Aug 1 02:00:12 kernel: Linux version 2.6.2219 (root@asus) (gcc version 3.4.2) #10 Thu Jul 28 21:28:12 CST 2016
Aug 1 02:00:12 kernel: The CPU feqenuce set to 500 MHz
Aug 1 02:00:12 kernel: CPU revision is: 0001974c
Aug 1 02:00:12 kernel: Determined physical RAM map:
Aug 1 02:00:12 kernel: memory: 08000000 @ 00000000 (usable)
Aug 1 02:00:12 kernel: Built 1 zonelists. Total pages: 32512
Aug 1 02:00:12 kernel: Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs noinitrd
Aug 1 02:00:12 kernel: Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Aug 1 02:00:12 kernel: Primary data cache 32kB, 4-way, linesize 32 bytes.
Aug 1 02:00:12 kernel: cause = 40808000, status = 11000000
Aug 1 02:00:12 kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Aug 1 02:00:12 kernel: calculating r4koff... 001e8480(2000000)
Aug 1 02:00:12 kernel: CPU frequency 500.00 MHz
Aug 1 02:00:12 kernel: Using 250.000 MHz high precision timer.
Aug 1 02:00:12 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Aug 1 02:00:12 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Aug 1 02:00:12 kernel: Mount-cache hash table entries: 512
Aug 1 02:00:12 kernel: RALINK_PCI_PCICFG_ADDR = 0
Aug 1 02:00:12 kernel: *************** Ralink PCIe RC mode *************
Aug 1 02:00:12 kernel: registering PCI controller with io_map_base unset
Aug 1 02:00:12 kernel: 2->[1][0][0][30]=0
Aug 1 02:00:12 kernel: 5->[1][0][0][30]=fffffffe
Aug 1 02:00:12 kernel: 2->[1][0][0][30]=0
Aug 1 02:00:12 kernel: 5->[1][0][0][30]=0
Aug 1 02:00:12 kernel: BAR0 at slot 0 = 0
Aug 1 02:00:12 kernel: bus=0, slot = 0x0
Aug 1 02:00:12 kernel: P2P(PCI) 0x00 = 08021814
Aug 1 02:00:12 kernel: P2P(PCI) 0x04 = 00100007
Aug 1 02:00:12 kernel: P2P(PCI) 0x08 = 06040001
Aug 1 02:00:12 kernel: P2P(PCI) 0x0c = 00010000
Aug 1 02:00:12 kernel: P2P(PCI) 0x10 = 00000000
Aug 1 02:00:12 kernel: P2P(PCI) 0x14 = 20100000
Aug 1 02:00:12 kernel: P2P(PCI) 0x18 = 00010100
Aug 1 02:00:12 kernel: P2P(PCI) 0x1c = 000000f0
Aug 1 02:00:12 kernel: P2P(PCI) 0x20 = 20002000
Aug 1 02:00:12 kernel: P2P(PCI) 0x24 = 0000fff0
Aug 1 02:00:12 kernel: P2P(PCI) 0x28 = 00000000
Aug 1 02:00:12 kernel: P2P(PCI) 0x2c = 00000000
Aug 1 02:00:12 kernel: P2P(PCI) 0x30 = 00000000
Aug 1 02:00:12 kernel: P2P(PCI) 0x34 = 00000040
Aug 1 02:00:12 kernel: P2P(PCI) 0x38 = 00000000
Aug 1 02:00:12 kernel: P2P(PCI) 0x3c = 000401ff
Aug 1 02:00:12 kernel: res[0]->start = 0
Aug 1 02:00:12 kernel: res[0]->end = 1ffffff
Aug 1 02:00:12 kernel: res[1]->start = 20100000
Aug 1 02:00:12 kernel: res[1]->end = 2010ffff
Aug 1 02:00:12 kernel: res[2]->start = 0
Aug 1 02:00:12 kernel: res[2]->end = 0
Aug 1 02:00:12 kernel: res[3]->start = 0
Aug 1 02:00:12 kernel: res[3]->end = 0
Aug 1 02:00:12 kernel: res[4]->start = 0
Aug 1 02:00:12 kernel: res[4]->end = 0
Aug 1 02:00:12 kernel: res[5]->start = 0
Aug 1 02:00:12 kernel: res[5]->end = 0
Aug 1 02:00:12 kernel: bus=1, slot = 0x0
Aug 1 02:00:12 kernel: dev III(PCIe) 0x00 = 30911814
Aug 1 02:00:12 kernel: dev III(PCIe) 0x04 = 00100000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x08 = 02800000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x0c = 00000000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x10 = 20000000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x14 = 00000000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x18 = 00000000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x1c = 00000000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x20 = 00000000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x24 = 00000000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x28 = 00000000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x2c = 30911814
Aug 1 02:00:12 kernel: dev III(PCIe) 0x30 = 00000000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x34 = 00000040
Aug 1 02:00:12 kernel: dev III(PCIe) 0x38 = 00000000
Aug 1 02:00:12 kernel: dev III(PCIe) 0x3c = 000001ff
Aug 1 02:00:12 kernel: res[0]->start = 20000000
Aug 1 02:00:12 kernel: res[0]->end = 2000ffff
Aug 1 02:00:12 kernel: res[1]->start = 0
Aug 1 02:00:12 kernel: res[1]->end = 0
Aug 1 02:00:12 kernel: res[2]->start = 0
Aug 1 02:00:12 kernel: res[2]->end = 0
Aug 1 02:00:12 kernel: res[3]->start = 0
Aug 1 02:00:12 kernel: res[3]->end = 0
Aug 1 02:00:12 kernel: res[4]->start = 0
Aug 1 02:00:12 kernel: res[4]->end = 0
Aug 1 02:00:12 kernel: res[5]->start = 0
Aug 1 02:00:12 kernel: res[5]->end = 0
Aug 1 02:00:12 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Aug 1 02:00:12 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Aug 1 02:00:12 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Aug 1 02:00:12 kernel: ralink flash device: 0x1000000 at 0x1c000000
Aug 1 02:00:12 kernel: Amd/Fujitsu Extended Query Table at 0x0040
Aug 1 02:00:12 kernel: number of CFI chips: 1
Aug 1 02:00:12 kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Aug 1 02:00:12 kernel: partion 3: 50000 fb0000
Aug 1 02:00:12 kernel: partion 4: 141140 ebeec0
Aug 1 02:00:12 kernel: Creating 5 MTD partitions on "Ralink SoC physically mapped flash":
Aug 1 02:00:12 kernel: 0x00000000-0x00030000 : "Bootloader"
Aug 1 02:00:12 kernel: 0x00030000-0x00040000 : "nvram"
Aug 1 02:00:12 kernel: 0x00040000-0x00050000 : "Factory"
Aug 1 02:00:12 kernel: 0x00050000-0x01000000 : "linux"
Aug 1 02:00:12 kernel: mtd: partition "linux" extends beyond the end of device "Ralink SoC physically mapped flash" -- size truncated to 0x7b0000
Aug 1 02:00:12 kernel: 0x00141140-0x01000000 : "rootfs"
Aug 1 02:00:12 kernel: mtd: partition "rootfs" extends beyond the end of device "Ralink SoC physically mapped flash" -- size truncated to 0x6beec0
Aug 1 02:00:12 kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Aug 1 02:00:12 kernel: Load Ralink DFS Timer Module
Aug 1 02:00:12 kernel: RT3xxx EHCI/OHCI init.
Aug 1 02:00:13 kernel: pcie_portdrv_probe->Dev[1814:0802] has invalid IRQ. Check vendor BIOS
Aug 1 02:00:13 kernel: assign_interrupt_mode Found MSI capability
Aug 1 02:00:13 kernel: GPIO MODE: 189f
Aug 1 02:00:13 kernel: Ralink gpio driver initialized
Aug 1 02:00:13 kernel: rtl8367r_init...
Aug 1 02:00:13 kernel: switch IC = CHIP_RTL8367R_VB, SDK = V1.2.6
Aug 1 02:00:13 kernel: rdm_major = 254
Aug 1 02:00:13 kernel: GDMA1_MAC_ADRH -- : 0x00000000
Aug 1 02:00:13 kernel: GDMA1_MAC_ADRL -- : 0x00000000
Aug 1 02:00:13 kernel: Ralink APSoC Ethernet Driver Initilization. v2.0 256 rx/tx descriptors allocated, mtu = 1500!
Aug 1 02:00:13 kernel: GDMA1_MAC_ADRH -- : 0x0000e03f
Aug 1 02:00:13 kernel: GDMA1_MAC_ADRL -- : 0x49962744
Aug 1 02:00:13 kernel: PROC INIT OK!
Aug 1 02:00:13 kernel: u32 classifier
Aug 1 02:00:13 kernel: OLD policer on
Aug 1 02:00:13 kernel: Netfilter messages via NETLINK v0.30.
Aug 1 02:00:13 kernel: nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
Aug 1 02:00:13 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 1 02:00:13 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Aug 1 02:00:13 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Aug 1 02:00:13 kernel: Warning: unable to open an initial console.
Aug 1 02:00:13 kernel: phy_tx_ring = 0x006ba000, tx_ring = 0xa06ba000
Aug 1 02:00:13 kernel: phy_rx_ring = 0x006dd000, rx_ring = 0xa06dd000
Aug 1 02:00:13 kernel: CDMA_CSG_CFG = 81000007
Aug 1 02:00:13 kernel: GDMA1_FWD_CFG = C0710000
Aug 1 02:00:13 kernel: wan_stb_x=0
Aug 1 02:00:13 kernel: ethernet_wan_x=0
Aug 1 02:00:13 kernel: LAN: P1,P2,P3,P4 DSLWAN: P0
Aug 1 02:00:13 kernel: set switch ic to SVLAN
Aug 1 02:00:13 kernel: configure_dslwan_vlan(1, 01, 01, 01)
Aug 1 02:00:13 kernel: configure_dslwan_vlan(2, 1e, 1e, 1e)
Aug 1 02:00:13 kernel: configure_dslwan_vlan(3, 00, 00, 00)
Aug 1 02:00:13 kernel: configure_dslwan_vlan(4, 00, 00, 00)
Aug 1 02:00:13 kernel: rt2860v2_ap: module license 'unspecified' taints kernel.
Aug 1 02:00:13 kernel: === pAd = c0074000, size = 851864 ===
Aug 1 02:00:13 kernel: <-- RTMPAllocAdapterBlock, Status=0
Aug 1 02:00:13 kernel: register rt2860
Aug 1 02:00:13 kernel: === pAd = c0171000, size = 725984 ===
Aug 1 02:00:13 kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Aug 1 02:00:13 kernel: <-- RTMPAllocAdapterBlock, Status=0
Aug 1 02:00:13 kernel: pAd->CSRBaseAddress =0xc0160000, csr_addr=0xc0160000!
Aug 1 02:00:13 kernel: Algorithmics/MIPS FPU Emulator v1.5
Aug 1 02:00:13 kernel: RX DESC a76dc000 size = 2048
Aug 1 02:00:13 kernel: RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5
Aug 1 02:00:13 kernel: NVM is FLASH mode
Aug 1 02:00:13 kernel: 1. Phy Mode = 9
Aug 1 02:00:13 kernel: 2. Phy Mode = 9
Aug 1 02:00:13 kernel: 3. Phy Mode = 9
Aug 1 02:00:13 kernel: ^[[mAntCfgInit: primary/secondary ant 0/1
Aug 1 02:00:13 kernel: ^[[mRTMPSetPhyMode: channel is out of range, use first channel=0
Aug 1 02:00:13 kernel: MCS Set = ff ff 00 00 01
Aug 1 02:00:13 kernel: SYNC - BBP R4 to 20MHz.l
Aug 1 02:00:16 kernel: =====================================================
Aug 1 02:00:16 kernel: Channel 1 : Dirty = 0, False CCA = 32, Busy Time = 966, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 2 : Dirty = 0, False CCA = 652, Busy Time = 27133, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 3 : Dirty = 0, False CCA = 583, Busy Time = 16429, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 4 : Dirty = 0, False CCA = 439, Busy Time = 19365, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 5 : Dirty = 0, False CCA = 1122, Busy Time = 31743, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 6 : Dirty = 0, False CCA = 49, Busy Time = 1615, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 7 : Dirty = 0, False CCA = 1073, Busy Time = 42884, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 8 : Dirty = 0, False CCA = 1047, Busy Time = 30851, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 9 : Dirty = 0, False CCA = 987, Busy Time = 37049, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 10 : Dirty = 0, False CCA = 959, Busy Time = 36147, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 11 : Dirty = 0, False CCA = 57, Busy Time = 1822, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 12 : Dirty = 0, False CCA = 1024, Busy Time = 28517, Skip Channel = FALSE
Aug 1 02:00:16 kernel: Channel 13 : Dirty = 0, False CCA = 86, Busy Time = 24858, Skip Channel = FALSE
Aug 1 02:00:16 kernel: =====================================================
Aug 1 02:00:16 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 1
Aug 1 02:00:16 kernel: Min Dirty = 0
Aug 1 02:00:16 kernel: ExChannel = 5 , 0
Aug 1 02:00:16 kernel: BW = 40
Aug 1 02:00:16 kernel: SYNC - BBP R4 to 20MHz.l
Aug 1 02:00:16 kernel: SYNC - BBP R4 to 20MHz.l
Aug 1 02:00:17 kernel: SYNC - BBP R4 to 20MHz.l
Aug 1 02:00:17 kernel: SYNC - BBP R4 to 20MHz.l
Aug 1 02:00:17 kernel: SYNC - BBP R4 to 20MHz.l
Aug 1 02:00:18 kernel: SYNC - BBP R4 to 20MHz.l
Aug 1 02:00:18 kernel: SYNC - BBP R4 to 20MHz.l
Aug 1 02:00:18 kernel: SYNC - BBP R4 to 20MHz.l
Aug 1 02:00:19 kernel: Main bssid = e0:3f:49:96:27:40
Aug 1 02:00:19 kernel: <==== rt28xx_init, Status=0
Aug 1 02:00:19 kernel: 0x1300 = 00064380
Aug 1 02:00:19 kernel: RX DESC a7742000 size = 2048
Aug 1 02:00:19 kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Aug 1 02:00:19 kernel: 1. Phy Mode = 8
Aug 1 02:00:19 kernel: 2. Phy Mode = 8
Aug 1 02:00:19 kernel: 3. Phy Mode = 8
Aug 1 02:00:19 kernel: ^[[mAntCfgInit: primary/secondary ant 0/1
Aug 1 02:00:19 kernel: ^[[mRTMPSetPhyMode: channel is out of range, use first channel=0
Aug 1 02:00:19 kernel: MCS Set = ff ff ff 00 01
Aug 1 02:00:19 kernel: SYNC - BBP R4 to 20MHz.l
Aug 1 02:00:20 kernel: =====================================================
Aug 1 02:00:20 kernel: Channel 36 : Dirty = 0, False CCA = 1, Busy Time = 23, Skip Channel = FALSE
Aug 1 02:00:20 kernel: Channel 40 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Aug 1 02:00:20 kernel: Channel 44 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Aug 1 02:00:20 kernel: Channel 48 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Aug 1 02:00:20 kernel: =====================================================
Aug 1 02:00:20 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 36
Aug 1 02:00:20 kernel: Min Dirty = 0
Aug 1 02:00:20 kernel: ExChannel = 0 , 0
Aug 1 02:00:20 kernel: BW = 40
Aug 1 02:00:20 kernel: Main bssid = e0:3f:49:96:27:44
Aug 1 02:00:20 kernel: <==== rt28xx_init, Status=0
Aug 1 02:00:20 kernel: 0x1300 = 00064380
Aug 1 02:00:20 stop_nat_rules: apply the redirect_rules!
Aug 1 02:00:21 WAN Connection: Ethernet link down.
Aug 1 02:00:21 DSL-N55U: start httpd
Aug 1 02:00:21 kernel: set watchdog pid as: 249
Aug 1 02:00:21 kernel: set watchdog pid as: 249
Aug 1 02:00:21 disk monitor: be idle
Aug 1 02:00:22 hour monitor: daemon is starting
Aug 1 02:00:22 hour monitor: daemon terminates
Aug 1 02:00:22 miniupnpd[271]: version 1.9 started
Aug 1 02:00:22 miniupnpd[271]: HTTP listening on port 44500
Aug 1 02:00:22 miniupnpd[271]: Listening for NAT-PMP/PCP traffic on port 5351
Aug 1 02:00:23 kernel: eth2.1.1: Setting MAC address to e0 3f 49 96 27 40.
Aug 1 02:00:23 kernel: VLAN (eth2.1.1): Setting underlying device (eth2.1) to promiscious mode.
Aug 1 02:00:23 pppd[285]: pppd 2.4.7 started by admin, uid 0
Aug 1 02:00:23 kernel: SCSI subsystem initialized
Aug 1 02:00:24 kernel: ufsd: driver 8.5 (NTFS4LINUX_U85_022_S[2011-11-29-13:37:54]) LBD=ON with ioctl loaded at c04e3000
Aug 1 02:00:24 kernel: NTFS support included
Aug 1 02:00:24 kernel: Built_for__asus_n56u_2011-11-22
Aug 1 02:00:33 rc_service: zcip 367:notify_rc start_firewall
Aug 1 02:00:33 zcip client: configured 169.254.122.146
Aug 1 02:00:34 kernel: nf_conntrack_rtsp v0.6.21 loading
Aug 1 02:00:34 kernel: nf_nat_rtsp v0.6.21 loading
Aug 1 02:00:58 pppd[285]: Timeout waiting for PADO packets
Aug 1 02:01:45 WAN Connection: Fail to connect with some issues.
Aug 1 02:02:13 pppd[285]: Timeout waiting for PADO packets
Aug 1 02:02:13 pppd[285]: Connected to 0c:86:10:9b:3b:3a via interface eth2.1.1
Aug 1 02:02:13 pppd[285]: Connect: ppp0 <--> eth2.1.1
Aug 1 02:02:13 pppd[285]: PAP authentication succeeded
Aug 1 02:02:13 pppd[285]: peer from calling number 0C:86:10:9B:3B:3A authorized
Aug 1 02:02:13 pppd[285]: local IP address 87.15.143.126
Aug 1 02:02:13 pppd[285]: remote IP address 192.168.100.1
Aug 1 02:02:13 pppd[285]: primary DNS address 85.37.17.42
Aug 1 02:02:13 pppd[285]: secondary DNS address 85.38.28.87
Aug 1 02:02:13 rc_service: ip-up 432:notify_rc start_firewall
Aug 1 02:02:14 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth2.1.1)!
Aug 1 02:02:14 wan: finish adding multi routes
Aug 1 02:02:14 rc_service: ip-up 432:notify_rc stop_upnp
Aug 1 02:02:14 rc_service: waitting "start_firewall" via ip-up ...
Aug 1 02:02:15 rc_service: ip-up 432:notify_rc start_upnp
Aug 1 02:02:15 rc_service: waitting "stop_upnp" via ip-up ...
Aug 1 02:02:15 miniupnpd[271]: shutting down MiniUPnPd
Aug 1 02:02:16 WAN Connection: DNS probe succeeded (0/2)
Aug 1 02:02:16 WAN Connection: WAN was restored.
Aug 1 02:02:16 ntp: start NTP update
Aug 1 02:02:16 miniupnpd[497]: version 1.9 started
Aug 1 02:02:16 miniupnpd[497]: HTTP listening on port 52065
Aug 1 02:02:16 miniupnpd[497]: Listening for NAT-PMP/PCP traffic on port 5351
Jan 8 13:50:32 rc_service: ntp 486:notify_rc restart_upnp
Jan 8 13:50:32 miniupnpd[497]: shutting down MiniUPnPd
Jan 8 13:50:32 miniupnpd[504]: version 1.9 started
Jan 8 13:50:32 miniupnpd[504]: HTTP listening on port 41086
Jan 8 13:50:32 miniupnpd[504]: Listening for NAT-PMP/PCP traffic on port 5351
Jan 8 13:50:33 rc_service: ntp 486:notify_rc restart_diskmon
Jan 8 13:50:33 disk_monitor: Finish
Jan 8 13:50:33 disk monitor: be idle
Jan 8 13:54:05 dnsmasq[234]: nameserver 85.38.28.87 refused to do a recursive query
Jan 8 14:00:33 disk_monitor: Got SIGALRM...
Jan 8 14:56:30 WAN Connection: DNS probe failed (0/2)
Jan 8 15:06:01 WAN Connection: DNS probe failed (0/2)
Jan 8 15:06:23 WAN Connection: DNS probe failed (0/2)
Jan 8 16:16:22 WAN Connection: DNS probe failed (0/2)
Jan 8 17:41:22 WAN Connection: DNS probe failed (0/2)
Jan 8 17:41:30 WAN Connection: DNS probe failed (1/2)
Io capisco poco di impostazioni del network...ma vorrei fare tutti i tentativi possibili prima di chiamare il tecnico Alice. Purtroppo telefonando, ora che prendo la linea e parlo con un operatore, il problema s'è sempre risolto automaticamente e quindi a loro non risultano.
Ho cambiato due router (uno, un Netgear, perché dava questi problemi ed ero in tempo per il reso, uno, un altro Asus uguale all'attuale, perché fulminato durante un temporale) e non è mai cambiato nulla.

Help..

Grazie
Cat383 è offline   Rispondi citando il messaggio o parte di esso
Old 08-01-2017, 18:08   #2
Fede_94
Senior Member
 
L'Avatar di Fede_94
 
Iscritto dal: Dec 2015
Messaggi: 1788
Prova a scollegare tutti i telefoni e i filtri, collegando solo il modem/router alla presa telefonica principale senza filtro.
Fede_94 è offline   Rispondi citando il messaggio o parte di esso
Old 08-01-2017, 18:36   #3
Dumah Brazorf
Bannato
 
Iscritto dal: Oct 2002
Messaggi: 29264
Aprire tutte le prese, assicurarsi che siano in parallelo e bonificare da eventuali condensatori, suonerie aggiuntive altri apparati collegati.

http://skynet81.blogspot.it/2013/01/...-per-adsl.html
Dumah Brazorf è offline   Rispondi citando il messaggio o parte di esso
Old 08-01-2017, 20:13   #4
Cat383
Junior Member
 
Iscritto dal: Apr 2011
Messaggi: 4
mmmh, la prima cosa è semplice... la seconda un po' meno, dato che non ho idea come si presentino le prese in parallelo e come si bonifichino i condensatori...

Grazie

Ultima modifica di Cat383 : 08-01-2017 alle 20:31.
Cat383 è offline   Rispondi citando il messaggio o parte di esso
 Rispondi


Samsung Micro RGB R95H, il primo LCD a LED rossi, verdi e blu di Samsung alla prova del banco di misura Samsung Micro RGB R95H, il primo LCD a LED rossi...
iPhone 18 Pro: la recensione del miglior iPhone compatto di sempre iPhone 18 Pro: la recensione del miglior iPhone ...
Panasonic, 30 anni di Toughbook: la "Bibbia" di mille regole dietro i nuovi G3 e 34 Panasonic, 30 anni di Toughbook: la "Bibbia...
realme C100x, lo smartphone economico con la batteria da 7500 mAh. La recensione realme C100x, lo smartphone economico con la bat...
Star Wars Zero Company è l'erede di XCOM 2 Star Wars Zero Company è l'erede di XCOM ...
SpaceX mostra nuove immagini del lancio ...
Cina: CAS Space e Guangzhou Laboratory e...
Nikon Comedy Wildlife Awards 2026: le fo...
Samsung Galaxy A57 e A37 costano di più ...
Windows 11 26H2 taglia il consumo di RAM...
KINGPIN è tornato! Il re dell'ove...
CPU usata, ban ereditato: il caso del Ry...
Spunta un engineering sample di Ryzen 9 ...
iPhone 18 Pro, alcuni utenti segnalano s...
Android Auto: Gemini ascolta la domanda ...
OpenAI avvisa oltre 100 organizzazioni p...
Dall'AI alla SI: il rebranding di Trump ...
0patch offrirà supporto esteso pe...
Sudo sembra un iPod, ma nasconde una car...
Meta, OpenAI e Google rifanno OpenClaw: ...
Chromium
GPU-Z
OCCT
LibreOffice Portable
Opera One Portable
Opera One 106
CCleaner Portable
CCleaner Standard
Cpu-Z
Driver NVIDIA GeForce 546.65 WHQL
SmartFTP
Trillian
Google Chrome Portable
Google Chrome 120
VirtualBox
Tutti gli articoli Tutte le news Tutti i download

Strumenti

Regole
Non Puoi aprire nuove discussioni
Non Puoi rispondere ai messaggi
Non Puoi allegare file
Non Puoi modificare i tuoi messaggi

Il codice vB è On
Le Faccine sono On
Il codice [IMG] è On
Il codice HTML è Off
Vai al Forum


Tutti gli orari sono GMT +1. Ora sono le: 00:42.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Served by www3v