Lettura analisi hard disk GSMARTCONTROL

[mortimer7]

Salve,
il mio computer monta un vecchio hard disk da 250GB del 2007. funziona ancora bene, però per sicurezza ho voluto provare ad effettuare uno "Short self-test" con GSMARTCONTROL (programma per Linux)

questo è l'output:

smartctl 6.2 2013-07-26 r3841 [i686-linux-3.10.12-100.fc18.i686] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Maxtor DiamondMax 21
Device Model:     MAXTOR ------------
Serial Number:    --------
Firmware Version: 3.AAE
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Wed Mar 12 11:05:40 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  92) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   114   088   006    Pre-fail  Always       -       58770367
  3 Spin_Up_Time            0x0003   096   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   095   095   020    Old_age   Always       -       6049
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   087   060   030    Pre-fail  Always       -       551794680
  9 Power_On_Hours          0x0032   088   088   000    Old_age   Always       -       11146
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   095   095   020    Old_age   Always       -       6008
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   061   055   045    Old_age   Always       -       39 (Min/Max 25/39)
194 Temperature_Celsius     0x0022   039   045   000    Old_age   Always       -       39 (0 20 0 0 0)
195 Hardware_ECC_Recovered  0x001a   063   052   000    Old_age   Always       -       4263834
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   191   000    Old_age   Always       -       686
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 750 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 750 occurred at disk power-on lifetime: 10885 hours (453 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 6f 80 05 d4 e0  Error: ICRC, ABRT 111 sectors at LBA = 0x00d40580 = 13895040

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ef 04 d4 e0 00      00:01:01.227  READ DMA EXT
  25 00 00 ef 03 d4 e0 00      00:01:01.210  READ DMA EXT
  25 00 00 ef 02 d4 e0 00      00:01:01.199  READ DMA EXT
  25 00 00 ef 01 d4 e0 00      00:01:01.195  READ DMA EXT
  25 00 00 ef 00 d4 e0 00      00:01:01.192  READ DMA EXT

Error 749 occurred at disk power-on lifetime: 10880 hours (453 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 fe 0e 60 e0  Error: ICRC, ABRT at LBA = 0x00600efe = 6295294

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 14 eb 0e 60 e0 00      00:00:29.457  READ DMA EXT
  25 00 2c bf 0e 60 e0 00      00:00:29.457  READ DMA EXT
  25 00 0a 2f 66 d0 e0 00      00:00:29.457  READ DMA EXT
  25 00 04 2b 66 d0 e0 00      00:00:29.456  READ DMA EXT
  25 00 3c ef 65 d0 e0 00      00:00:29.456  READ DMA EXT

Error 748 occurred at disk power-on lifetime: 10874 hours (453 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 15 c8 fb d0 e0  Error: ICRC, ABRT 21 sectors at LBA = 0x00d0fbc8 = 13695944

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 d8 76 67 fb d0 e0 00      00:00:44.630  READ DMA EXT
  25 d8 07 5f fb d0 e0 00      00:00:44.629  READ DMA EXT
  25 d8 0c 4f fb d0 e0 00      00:00:44.628  READ DMA EXT
  25 d8 3a e7 fa d0 e0 00      00:00:44.626  READ DMA EXT
  25 d8 00 e7 f9 d0 e0 00      00:00:44.624  READ DMA EXT

Error 747 occurred at disk power-on lifetime: 9782 hours (407 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 40 00 60 e0  Error: ICRC, ABRT at LBA = 0x00600040 = 6291520

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 01 40 00 60 e0 00      00:09:42.171  READ DMA EXT
  25 00 01 3f 00 60 e0 00      00:09:42.171  READ DMA EXT
  25 00 01 4a 00 60 e0 00      00:09:42.171  READ DMA EXT
  25 00 01 49 00 60 e0 00      00:09:42.171  READ DMA EXT
  25 00 01 40 00 60 e0 00      00:09:42.171  READ DMA EXT

Error 746 occurred at disk power-on lifetime: 9782 hours (407 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 1f c8 a0 0f e0  Error: ICRC, ABRT 31 sectors at LBA = 0x000fa0c8 = 1024200

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 a7 a0 0f e0 00      00:08:24.237  READ DMA EXT
  25 00 28 01 74 0c e0 00      00:08:24.237  READ DMA EXT
  35 00 04 1f 01 0a e0 00      00:08:24.237  WRITE DMA EXT
  25 00 07 df 7b 57 e0 00      00:08:23.848  READ DMA EXT
  25 00 40 a7 a0 0f e0 00      00:08:26.127  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     11146         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

qualcuno è in grado di "decodificare" tutto questo guazzabuglio di cifre e dirmi in che condizioni si trova l'hard disk?

Grazie.

[tallines]

Ciao, se usi Linux come SO, sarebbe meglio che chiedessi nella sezione apposita

[Danilo Cecconi]

Senza andare in un'altra sezione (i valori SMART sono uguali sotto qualsiasi SO), dalla tabella relativa si vede che ci sono 51 settori riallocati + 18 pendenti + 16 non più correggibili.
Io mi preoccuperei di salvare i dati, prima che all'improvviso non sia più riconosciuto correttamente, poi continuerei ad usarlo, ma mettendo in preventivo l'eventualità (non certo remota!) di doverlo sostituire.

[tallines]

Originariamente inviato da Danilo Cecconi

i valori SMART sono uguali sotto qualsiasi SO

Giusto .

[M@gic]

il valore da controllare è l'utimo a destra

[Danilo Cecconi]

Originariamente inviato da M@gic

il valore da controllare è l'utimo a destra

Alt!
L'ultimo a dx è il Thresh (abbreviazione di Threshold = "Soglia" in Crystaldiskinfo).

Il vero valore da considerare è "Flag" (primo a sx) che è espresso in esadecimale, quindi da trasformare in decimale (Deg) con l'ausilio della calcolatrice in modalità "Programmatore".

[M@gic]

Originariamente inviato da Danilo Cecconi

Alt!
L'ultimo a dx è il Thresh (abbreviazione di Threshold = "Soglia" in Crystaldiskinfo).

Il vero valore da considerare è "Flag" (primo a sx) che è espresso in esadecimale, quindi da trasformare in decimale (Deg) con l'ausilio della calcolatrice in modalità "Programmatore".

guarda bene...in fondo a destra....

[s12a]

L'ultimo a destra è il Raw Value in formato decimale, ed è quello che conta.

[Danilo Cecconi]

E che c....zzz!!
Non mi ero accorto della barra di trascinamento laterale in fondo alla videata!

@ mortimer7

L'hd è a posto, non presenta errori di sorta.