SMART - problema Spin_Retry_Count

[akiro]

Ciao a tutti,
ho un HD Seagate Barracuda 7200.11 family (Device Model: ST3500320AS) e dagli attributi SMART ho una segnalazione riguardo lo Spin-up retry count, non ancora un warning (ma l'atributo è in rosso) ma si dice che potrebbe essere l'inizio di un problema hardware.

Ho eseguito un test completo, e questo è l'output:

smartctl 5.39.1 2010-01-28 r3054 [x86_64-mandriva-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.11 family
Device Model:     ST3500320AS
Serial Number:    9QMAPPH0
Firmware Version: SD1A
User Capacity:    500,107,862,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sat Aug 25 19:41:06 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 642) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 119) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x103b)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   112   096   006    Pre-fail  Always       -       202337875
  3 Spin_Up_Time            0x0003   094   094   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   098   098   020    Old_age   Always       -       2059
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   082   060   030    Pre-fail  Always       -       186104690
  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       8023
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       2
 12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2059
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   090   000    Old_age   Always       -       446684796351
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   062   056   045    Old_age   Always       -       38 (Lifetime Min/Max 29/39)
194 Temperature_Celsius     0x0022   038   044   000    Old_age   Always       -       38 (0 16 0 0)
195 Hardware_ECC_Recovered  0x001a   047   033   000    Old_age   Always       -       202337875
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      8023         -
# 2  Short offline       Completed without error       00%      8022         -
# 3  Conveyance offline  Completed without error       00%      8022         -
# 4  Extended offline    Interrupted (host reset)      00%      7908         -
# 5  Extended offline    Interrupted (host reset)      00%      7769         -
# 6  Extended offline    Interrupted (host reset)      00%      7739         -
# 7  Extended offline    Interrupted (host reset)      00%      7703         -
# 8  Extended offline    Interrupted (host reset)      00%      7130         -
# 9  Extended offline    Interrupted (host reset)      00%      7087         -
#10  Extended offline    Interrupted (host reset)      00%      7046         -
#11  Extended offline    Interrupted (host reset)      00%      6957         -
#12  Extended offline    Interrupted (host reset)      00%      6892         -
#13  Extended offline    Completed without error       00%      6723         -
#14  Extended offline    Completed without error       00%      6620         -
#15  Extended offline    Interrupted (host reset)      00%      6470         -
#16  Extended offline    Interrupted (host reset)      00%      6338         -
#17  Extended offline    Interrupted (host reset)      00%      6231         -
#18  Extended offline    Interrupted (host reset)      00%      6153         -
#19  Extended offline    Interrupted (host reset)      00%      6089         -
#20  Extended offline    Interrupted (host reset)      00%      5996         -
#21  Short offline       Completed without error       00%       839         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Mi devo preoccupare?

Grazie a tutti.

[Pozhar]

Per aiutarti meglio cortesemente posta uno screen di crystaldiskinfo.

[akiro]

ho Mandriva, purtroppo non c'è per questa distribuzione