Configurare scanner mustek-bearpaw-1200-cu

[gianlucab70]

Vorrei una mano a configurare questo scanner.
E' un po vecchiotto.

#tail -f /var/log/messages
Apr 14 19:07:01 SKY7 kernel: [ 4384.761920] usb 1-1.5: new full speed USB device using ehci_hcd and address 4
Apr 14 19:07:01 SKY7 kernel: [ 4384.854328] usb 1-1.5: New USB device found, idVendor=05d8, idProduct=4002
Apr 14 19:07:01 SKY7 kernel: [ 4384.854334] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Apr 14 19:07:01 SKY7 kernel: [ 4384.854458] usb 1-1.5: configuration #1 chosen from 1 choice

Ho visto questa guida:
http://www.sane-project.org/sane-mfgs.html#Z-MUSTEK
Lo stato di riconoscimento è "good"
Ho successivamente scaricato da questa pagina:
http://www.meier-geinitz.de/sane/gt68xx-backend/
il file: ps1fw.usb
Ho installato il pacchetto sane e poi seguendo questa guida:http://guide.debianizzati.org/index...._-_usb_scanner
#cp ps1fw.usb /usr/share/sane/gt68xx
#gedit /etc/sane.d/gt68xx.conf
e in fondo ho aggiunto:
usb 0x05d8 0x4002
override "mustek-bearpaw-1200-cu"

Vi posto anche il suddetto file:

# gt68xx.conf: Configuration file for GT68XX based scanners (1.0.21)
# Read man sane-gt68xx for documentation

# Put the firmware file into "/usr/share/sane/gt68xx/".

# Manual configuration is necessary for some scanners. Please uncomment the
# override line and optinally the vendor and product lines that apply to your
# scanner. For some scanners it's also necessary to change the name of the 
# firmware file. 

#############################################################################
# For testing scanners that are not yet supported by this backend add the
# vendor and product ids in the usb line below. Also fill in the override
# and firmware lines. For more details, see:
# http://www.meier-geinitz.de/sane/gt68xx-backend/adding.html

# usb vendor product
# override "something"
# firmware "path"

##############################################################################
# Autodetect Mustek BearPaw 1200 CU, 2400 CU, Mustek ScanExpress 1200 UB Plus,
# Artec Ultima 2000 (e+), and several other GT-6801-based scanners
usb 0x05d8 0x4002

# Mustek BearPaw 1200 CU doesn't need any manual override

# Mustek ScanExpress 1200 UB Plus:
#override "mustek-scanexpress-1200-ub-plus"

# Medion/Lifetec/Tevion LT 9452:
#override "mustek-scanexpress-1200-ub-plus"
#vendor "Lifetec"
#model "LT 9452"

# Trust Compact Scan USB 19200:
#override "mustek-scanexpress-1200-ub-plus"
#vendor "Trust"
#model "Compact Scan USB 19200"

# Mustek ScanExpress 2400 USB
#override "mustek-scanexpress-2400-usb"

# Artec Ultima 2000:
#override "artec-ultima-2000" 
#firmware "ePlus2k.usb"

# Artec Ultima 2000e+:
#override "artec-ultima-2000" 
#firmware "ePlus2k.usb"
#vendor "Artec"
#model "Ultima 2000e+"

# Boeder SmartScan Slim Edition:
#override "artec-ultima-2000" 
#vendor "Boeder"
#model "SmartScan Slim Edition"

# Medion/Lifetec/Tevion/Cytron MD/LT 9385:
#override "artec-ultima-2000" 
#vendor "Medion"
#model "MD/LT 9385"

# Medion/Lifetec/Tevion/Cytron MD 9458:
#override "artec-ultima-2000" 
#vendor "Medion"
#model "MD 9458"

# Trust Flat Scan USB 19200:
#override "artec-ultima-2000" 
#vendor "Trust"
#model "Flat Scan USB 19200"

# Mustek BearPaw 2400 CU:
#override "mustek-bearpaw-2400-cu"

# Fujitsu 1200CUS:
#override "mustek-bearpaw-2400-cu"
#vendor "Fujitsu"
#model "1200CUS"

##############################################################################
# Autodetect Mustek BearPaw 1200 TA and Mustek BearPaw 1200 CS
usb 0x055f 0x021e

# Mustek BearPaw 1200 TA doesn't need any manual settings

# Mustek BearPaw 1200 CS:
#model "Bearpaw 1200 CS"

##############################################################################
# Autodetect Mustek BearPaw 2400 TA and Mustek BearPaw 2400 CS
usb 0x055f 0x0218

# Mustek BearPaw 2400 TA doesn't need any manual settings

# Mustek BearPaw 2400 CS:
#model "Bearpaw 2400 CS"

##############################################################################
# Autodetect Mustek BearPaw 2400 TA Plus, Packard Bell Diamond 2450, and
# Trust 240TH Easy Webscan Gold
usb 0x055f 0x0219

# Mustek BearPaw 2400 TA doesn't need any manual settings

# Trust 240TH Easy Webscan Gold:
#vendor "Trust"
#model "240TH Easy Webscan Gold"

# Packard Bell Diamond 2450:
#vendor "Packard Bell"
#model "Diamond 2450"

##############################################################################
# Autodetect Mustek BearPaw 2448 TA Plus and Mustek BearPaw 2448 CS Plus
usb 0x055f 0x021a

# Mustek BearPaw 2448 CS Plus:
#model "Bearpaw 2448 CS Plus"

##############################################################################
# Autodetect Mustek BearPaw 2400 CU Plus
usb 0x055f 0x021d

##############################################################################
# Autodetect Mustek ScanExpress 1248 UB
usb 0x055f 0x021f

##############################################################################
# Autodetect Mustek Bearpaw 1200 CU Plus and Packard Bell Diamond 1200
usb 0x055f 0x021c

# Mustek BearPaw 1200 CU Plus doesn't need any manual settings

# Packard Bell Diamond 1200:
#vendor "Packard Bell"
#model "Diamond 1200"

# Another Mustek BearPaw 1200 CU Plus version?
usb 0x055f 0x021b

##############################################################################
# Autodetect Mustek ScanExpress A3 USB
usb 0x055f 0x0210

# Mustek ScanExpress A3 USB doesn't need any manual settings

##############################################################################
# Autodetect Lexmark X70/X73
usb 0x043d 0x002d

##############################################################################
# Autodetect Plustek OpticPro 1248U and Revscan 19200i
usb 0x07b3 0x0401
usb 0x07b3 0x0400

# Plustek OpticPro 1248U doesn't need any manual settings

# RevScan 19200i
#vendor "RevScan"
#model "19200i"

##############################################################################
# Autodetect Plustek OpticPro U16B and UT16B
usb 0x07b3 0x0402
usb 0x07b3 0x0403

# Plustek OpticPro U16B doesn't need any manual settings

# Plustek OpticPro UT16B
#model "UT16B"

##############################################################################
# Autodetect Plustek OpticPro S12 and Nortek MyScan1200
usb 0x07b3 0x040b
#vendor "Nortek"
#model "MyScan 1200"

##############################################################################
# Autodetect Plustek OpticPro S24
usb 0x07b3 0x040e

##############################################################################
# Autodetect Plustek OpticSlim M12 and NeatReceipts Scanalizer Professional 2.5
usb 0x07b3 0x0412
#vendor "NeatReceipts"
#model "Scanalizer Professional 2.5"

##############################################################################
# Iriscan Express 2
usb 0x07b3 0x045f

##############################################################################
# Autodetect NeatReceipts Mobile Scanner
usb 0x07b3 0x0462

##############################################################################
# Autodetect Plustek OpticSlim 1200
usb 0x07b3 0x0413

##############################################################################
# Autodetect Plustek OpticSlim 2400
usb 0x07b3 0x0422

##############################################################################
# Autodetect Plustek OpticSlim 2400 plus
usb 0x07b3 0x0454
model "OpticSlim 2400 Plus"
override "plustek-opticslim-2400"

##############################################################################
# Autodetect Genius Colorpage SF600
usb 0x0458 0x2021

##############################################################################
# Autodetect Genius Colorpage Vivid3x
usb 0x0458 0x2011

# Genius Colorpage Vivid3x doesn't need any manual settings

##############################################################################
# Autodetect Genius Colorpage Vivid4x
usb 0x0458 0x201b

##############################################################################
# Autodetect Genius Colorpage Vivid3xe
usb 0x0458 0x2017

##############################################################################
# Autodetect Genius Colorpage Vivid4xe
usb 0x0458 0x201a

##############################################################################
# Autodetect Genius Colorpage 1200 X
usb 0x0458 0x201d

##############################################################################
# Autodetect Genius Colorpage 1200 XE
usb 0x0458 0x201f

##############################################################################
# Autodetect Genius Colorpage Vivid 4
usb 0x0458 0x2014

##############################################################################
# Autodetect Genius Color Slim 1200
usb 0x0458 0x201E

##############################################################################
# Autodetect Visioneer OneTouch 7300
usb 0x04a7 0x0444

##############################################################################
usb 0x05d8 0x4002
override "mustek-bearpaw-1200-cu"

# sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x05d8, product=0x4002, chip=GT-6801) at libusb:001:005
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

# scanimage -T

^Cscanimage: received signal 2
scanimage: trying to stop scanner
scanimage: sane_start: Device busy

Lo scanner non da alcun segnale. Nessun rumore. Niente di niente.
Help me.

[sacarde]

ho lo stesso



riassunto dei comandi:


gpasswd -a username scanner

x il firmware
- http://www.meier-geinitz.de/sane/gt68xx-backend/
- cp PS1Gfw.usb /usr/share/sane/gt68xx/
- chmod a+r /usr/share/sane/gt68xx/PS1Gfw.usb

[gianlucab70]

Originariamente inviato da sacarde

ho lo stesso
riassunto dei comandi:
gpasswd -a username scanner
x il firmware
- http://www.meier-geinitz.de/sane/gt68xx-backend/
- cp PS1Gfw.usb /usr/share/sane/gt68xx/
- chmod a+r /usr/share/sane/gt68xx/PS1Gfw.usb

Ancora non va.
Adesso ho cancellato il file di configurazione : /etc/sane.d/gt68xx.conf
Come faccio a rigenerarlo pulito?
Inoltre il file PS1Gfw.usb è per un altro modello. Funzionerà con il mio?

[sacarde]

il file: /etc/sane.d/gt68xx.conf
lo trovi dentro il pacchetto: sane


si si scusa, per il tuo:
BearPaw 1200 CU
il file e':
http://www.meier-geinitz.de/sane/gt6...ware/ps1fw.usb

[gianlucab70]

Originariamente inviato da sacarde

il file: /etc/sane.d/gt68xx.conf
lo trovi dentro il pacchetto: sane


si si scusa, per il tuo:
BearPaw 1200 CU
il file e':
http://www.meier-geinitz.de/sane/gt6...ware/ps1fw.usb

Ho provato a disinstallare e reinstallare sane ma ancora non trovo gt68xx.conf

[sacarde]

debian e ubuntu l'hanno in:

libsane

[gianlucab70]

Ancora nulla.
Due considerazioni.
1) ho notato che esistono 3 firmware con gli stessi vendor e product.
Posso copiarli tutti e tre in /usr/share/sane/gt68xx/ in questo modo?

# ls -al /usr/share/sane/gt68xx/
totale 32
drwxr-xr-x 2 root root 4096 15 apr 22.14 .
drwxr-xr-x 3 root root 4096 15 apr 21.40 ..
-rw-r--r-- 1 root root 8170 15 apr 22.14 P9fw.usb
-rwxr-xr-x 1 root root 7986 15 apr 21.45 ps1fw.usb
-rw-r--r-- 1 root root 7792 15 apr 22.13 sbfw.usb

Potrebbero interferire fra di loro?
Osservando meglio il file di configurazione gt68xx.conf trovo queste scritte:

omississ
##############################################################################
# Autodetect Mustek BearPaw 1200 CU, 2400 CU, Mustek ScanExpress 1200 UB Plus,
# Artec Ultima 2000 (e+), and several other GT-6801-based scanners
usb 0x05d8 0x4002

# Mustek BearPaw 1200 CU doesn't need any manual override
omississ

"non necessita di alcun intervento manuale"
Quindi l'override non va decommentato?
Forse è per questo che non c'è una stringa dedicata ad esso.

[sacarde]

- in /usr/share/sane/gt68xx/ io ne ho solo uno
in effetti col nome: BearPaw 1200 CU e 0x05d8 0x4002
c'e' soltanto: ps1fw.usb



- in gt68xx.conf
lascerei un solo "usb 0x05d8 0x4002"
e toglierei: "override "mustek-bearpaw-1200-cu"



- i comandi:
sane-find-scanner
e
scanimage -L

che dicono?

[gianlucab70]

Originariamente inviato da sacarde

- in /usr/share/sane/gt68xx/ io ne ho solo uno
in effetti col nome: BearPaw 1200 CU e 0x05d8 0x4002
c'e' soltanto: ps1fw.usb



- in gt68xx.conf
lascerei un solo "usb 0x05d8 0x4002"
e toglierei: "override "mustek-bearpaw-1200-cu"



- i comandi:
sane-find-scanner
e
scanimage -L

che dicono?

Ho tolto anche override.....
sane-find-scanner è quello postato.
e scannimage -L non dice nulla. Anzi mi dice che il dispositivo è occupato.
A questo punto posso pensare che ci sia un problem hardware.

[sacarde]

provato

scanimage -L

da root?