|
|||||||
|
|
|
![]() |
|
|
Strumenti |
|
|
#1 |
|
Senior Member
Iscritto dal: May 2010
Messaggi: 325
|
Perplessità sul tipo di ram
Ciao a tutto il forum,
Questa è la mia configurazione attuale: ho un Phenom II X4 965BE con dissi Termaltake Silent 939 K8, VGA GTX 285 BE XFX con Accelero extreme GTX PRO, 2 HD 250MB e 1TB, mobo Asus M2N-SLI deluxe, Ram ddr2 2x2gb Corsair XMS2 C4DHX 6400 800mhz 4-4-4-12, ali Enermax 500 liberty silent Vorrei comprare un ASUS AM3 M4N98TD EVO a 96 euro, perchè il procio non viene fruttato!!! ...è la scelta giusta visto che la VGA è Nvidia e quindi, da quel che ho capito, per avere stabilità e SLI, lo stesso deve essere per il chipset, cioè serie M4N e non M4A (AMD)??? ...qualche altro consiglio??? ...e vorrei acquistare anche 4GB di ram... ...meglio un 2x2gb o 1x4gb prevedendo che win7 64bit o successivi s.o. supportano 16gb?? Ho visto il consiglio dato a Cico7273 G.SKILL DDR3 4GB PC1600 CL7 KIT (2x2GB) G.Skill 4GBRM, ma dove devo acquistare ha queste: DDR3 1600Mhz PC12800 4GB G.Skill Ripjaws 4GBRM CL7 (2x2GB) a 91 euro, Specifiche: Main Board intel System Desktop System Type DDR3 M/B Chipset Intel P55 CAS Latency 7-8-7-24-2N sono le stesse no?? Poi hanno: DDR3 1600Mhz PC12800 4GB Corsair Dominator CL7 (2x2GB) a 97 euro Dettagli prodotto CMP4GX3M2C1600C7 Model Brand CORSAIR Series DOMINATOR Model CMP4GX3M2C1600C7 Type 240-Pin DDR3 SDRAM Tech Spec Capacity 4GB (2 x 2GB) Speed DDR3 1600 (PC3 12800) Cas Latency 8 Timing 7-8-7-20 Voltage 1.65V Multi-channel Kit Dual Channel Kit Heat Spreader Yes Features Two matched 2GB modules for use in high performance Intel Core i7, i5 and i3 Dual Channel systems Outrageously fast 1600MHz performance Ultra-low 9-9-9-24 latency Intel XMP (Extreme Memory Profile) Support Includes new connector for future upgrades and accessories Manufacturer Warranty Parts Lifetime limited oppure: DDR3 1600Mhz PC12800 4GB G.Skill ECO CL7 (2x2GB) [F3-12800CL7D-4GBECO] a € 86 Dettagli prodotto Main Board intel System Desktop System Type DDR3 M/B Chipset Intel P55 CAS Latency 7-8-7-24-2N Capacity 4GB (2GBx2) Speed DDR3-1600 (PC3 12800) Test Voltage 1.35 Volts PCB Registered/Unbuffered Unbuffered Error Checking Non-ECC Type 240-pin DIMM Warranty Lifetime oppure: DDR3 1600Mhz PC12800 4GB Mushkin Redline CL6 Skt1156 (2x2GB) a € 115.00 Dettagli prodotto Redline DDR3 Dual Kit Red Frostbyte Edition Specifi cations: Memory Type: PC3-12800U (DDR3-1600) Memory Size: 2x 2048MB DIMMs DIMM Type: DIMM 240-pin Latency: CL6 Voltage: 1.65 Volt Heatspreader: Red Frostbyte Timings: CAS Latency (CL): 6 RAS-to-CAS-Delay (tRCD): 8 RAS-Precharge-Time (tRP): 6 Row-Active-Time (tRAS): 24 EAN Code 4260100423925 MID 996805 oppure: OCZ Platinum Low Voltage - DDR3 4GB (2x2GB) 1600MHz PC3-12800 C7 prezzo: 104.90€ Modello: OCZ3P1600LV4GK Specifiche Tecniche DDR3 PC3-12800 240 Pin Frequenza 1600 MHz Tempi di latenza 7-7-7-24 Voltaggio 1.65 V Caratteristiche Tecnologia XTC per massimizzare la dissipazione del calore Tecnologia EVP che consente di utilizzare V-dimm più elevate senza invalidare la garanzia Garanzia A vita (fornita dal produttore) Oppure queste ma al momento non sono disponibili e costano un pò troppo: PATRIOT VIPER II DDR3 4GB PC3-12800 1600MHZ (2X2GB) CL7 prezzo: € 132,90 Caratteristiche: -Extreme Performance PC3-12800 (1600MHz) -Low Latency (7-7-7-20) 1.9V -XMP Ready -Equipped with advance aluminum heat-dispersing shields -100% Tested and Verified -Lifetime Warranty -RoHS Compliant -Tested on Intel P35, P45, X38, P55, H55 and X48 chipsets e PATRIOT AMD BLACK EDITION DDR3 4GB PC3-12800 1600MHZ (2X2GB) CL7 Prezzo: € 136,60 Caratteristiche: -Extreme Performance PC3-12800 (1600MHz) -Low Latency (7-7-7-20) -Equipped with lightweight aluminum heat-dispersing shields -100% Tested and Verified -Lifetime Warranty -RoHS Compliant -Tested on AM3 790FX/GX oppure a 2000mhz (mi conviene???) Ma ho un pò di perplessità...: ...quali sono le migliori, tenendo conto rapporto qualità-prezzo?? Con dissipatore passivo preoprio o normali su cui montare il dissi ARCTIC COOLING RC Ram Cooler??? Quali altre marche mi consigliate??? Ps. vorrei overcloccare, ho un Phenom II X4 965BE, VGA GTX 285 BE XFX con Accelero extreme GTX PRO, 2 HD 250MB e 1TB... ma il mio ali è un Enermax 500 liberty, secondo voi regge l'overclock??? Queste sono le pecifiche tecniche della mobo dal sito del negozio: CPU AMD Socket AM3 ;Phenom™II /Athlon™II /Sempron™ 100 Series Processors AMD 140W CPU Support Support 45nm CPU Chipset NVIDIA nForce 980a SLI® Supports NVIDIA Clock Calibration(NVCC) function System Bus Up to 5200 MT/s ;HyperTransport™ 3.0 Memory 4 x DIMM, Max. 16 GB, DDR3 2000(O.C.)/1333/1066 ECC,Non-ECC,Un-buffered Memory Dual Channel memory architecture *AMD AM3 100 and 200 series CPU support up to DDR3 1066MHz **Due to OS limitation, when installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. ***Refer to www.asus.com or the user manual for the Memory QVL (Qualified Vendors Lists) Expansion Slots 2 x PCIe 2.0 x16 (dual @ x16 ) 2 x PCIe x1 2 x PCI 2.2 Multi-GPU Support Supports NVIDIA® SLI® Technology (dual @ x16) Supports NVIDIA® Hybrid SLI® Technology Storage NVIDIA® nForce® 980a SLI® chipset 1 xUltraDMA 133/100 5 xSATA 3.0 Gb/s ports (Legacy IDE operation is only supported on ports 1–4.) NVIDIA® MediaShield™ RAID Support RAID 0,1,0+1,5,JBOD 1 x External SATA 3.0 Gb/s port (SATA On the Go) LAN Broadcom® B5071 Gigabit LAN Controller featuring AI NET 2 Audio VIA® VT1708S 8-Channel High Definition Audio CODEC - Supports Jack-Detection, Multi-Streaming, and Front Panel Jack-Retasking - Coaxial and Optical S/PDIF Out ports at back I/O - ASUS Noise Filter IEEE 1394 VIA® VT6308P controller supports 2 x 1394a port(s) (1 port at mid-board, 1 port at back panel) USB 12 USB 2.0/1.1 ports (6 ports at mid-board, 6 ports at back panel) ASUS Unique Features ASUS Exclusive Features - Core Unclocker - MemOK! ASUS Power Solutions - 8+1 Phase Power Design - 100% Long-Life Capacitors - EPU ASUS Quiet Thermal Solution - ASUS Fanless Design: Heat-pipe solution - Stack Cool 3+ - Fan Xpert ASUS Express Gate ASUS Crystal Sound - ASUS Noise Filter ASUS EZ DIY: - ASUS Q-Connector - ASUS O.C. Profile - ASUS CrashFree BIOS 3 - ASUS EZ Flash 2 - ASUS MyLogo 2 - Multi-language BIOS Overclocking Features Intelligent overclocking tools - ASUS Turbo Key - ASUS TurboV Precision Tweaker 2 - vCore: Adjustable CPU voltage at 0.0125V increment - vHT Bus: Adjustable HT voltage at 0.02V increment - vDIMM: Adjustable DRAM voltage at 0.02V increment - vChipset: Adjustable NB voltage at 0.02V increment SFS (Stepless Frequency Selection) - FSB tuning from 200MHz up to 600MHz at 1MHz increment - PCI Express frequency tuning from 100MHz up to 200MHz at 1MHz increment Overclocking Protection - ASUS C.P.R.(CPU Parameter Recall) Back Panel I/O Ports 1 x External SATA 1 x IEEE 1394a 1 x LAN(RJ45) port 6 x USB 2.0/1.1 8 -Channel Audio I/O 1 x PS/2 Keyboard port (purple) 1 x PS/2 Mouse port (green) 1 x Coaxial S/PDIF Out port 1 x Optical S/PDIF Out port Internal I/O Connectors 3 x USB connectors supports additional 6 USB ports 1 x IDE connector 1 x IEEE 1394a connector 1 x CPU Fan connector 1 x Power Fan connector 1 x COM connector 5 x SATA 3.0Gb/s connectors 2 x Chassis Fan connector (1 x 3 pin, 1 x 4 pin) 1 x MemOK! button 1 x Core Unlocker switch 1 x S/PDIF Out header Front panel audio connector 24-pin ATX Power connector 8-pin ATX 12V Power connector System Panel(Q-Connector) BIOS 8 Mb Flash ROM , AMI BIOS, SPI, PnP, DMI2.0, WfM2.0, SM BIOS 2.5, ACPI 2.0a, ASUS EZ Flash 2, ASUS CrashFree BIOS 3 Manageability WOL by PME,WOR by PME,WOR by Ring,PXE Accessories User's manual 1 x I/O Shield 4 x SATA cable(s) 1 x UltraDMA 133/100 cable 1 x SLI bridge cable Q-Connector Support Disc Drivers Anti-virus software (OEM version) ASUS Update ASUS Utilities Form Factor ATX Form Factor 12 inch x 9.6 inch ( 30.5 cm x 24.4 cm ) Ultima modifica di tartabruga : 06-11-2010 alle 11:15. |
|
|
|
|
|
#2 | |
|
Senior Member
Iscritto dal: Oct 2009
Città: Domodossola
Messaggi: 1988
|
Quote:
-Non capisco cosa tu intenda per "il processore non viene sfruttato" -Non è vero che il sistema è più stabile se prendi una scheda madre con chipset nvidia utilizzando una scheda video nvidia e non credo che a te serva uno sli di gtx285, non sarebbe per niente conveniente; -Tra le ram da te indicate le più convenienti sono le G.SKILL DDR3 4GB PC1600 CL7 KIT (2x2GB) G.Skill 4GBRM, prendere ram superiori a 1600MHz non è per nulla conveniente, la ram non ha bisogno di dissipatori aggiuntivi rispetto a quello già montato (se non si ha intenzione di fare overclock estremi); -L'alimentatore regge tranquilamente l'overclock, ma io credo che anche le ram che possiedi con un leggero overvolt possano arrivare a 1100MHz circa e anche la scheda madre ti permetta di portare il processore almeno a 3,8GHz, hai già fatto qualche prova? perchè non ti conviene cambiare ora la scheda madre, non sarebbe comunque compatibile con i futuri processori. Aggiorna il bios della scheda madre con l'ultimo disponibile e prova l'overclock così con i componenti che hai, non è possibile che non salga nulla.
__________________
Cpu Ryzen 5 3600 4,4GHz | Ram 16GB 3200MHz | Vga GTX 1070 | Schermo Xiaomi Mi 34 Curved | Nome Steam: Marcopazzo |
|
|
|
|
|
| Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 17:37.




















