HELP vi prego, risoluzione bloccata con driver nvidia su ubuntu 9.10

[UomoAzione]

Ragazzi vi prego qualcuno mi aiuti sto IMPAZZENDO...

Se installo i driver nvidia la massima risoluzione selezionabile diventa 640... e piu schermate a 640 si affiancano per panning...

Le ho provate tutte per sistemare il problema ma non c'è verso... vi prego aiuto, sto davvero impazzendo se qualcuno ha la pazienza di seguirmi in msn gli passo il mio contatto! grazie!)


RISOLTO:
installate i driver nvidia e poi sostituite questi due file allegati ai vostri fatemi sapere se ho aiutato qualcuno

http://www.filefront.com/15978737/config.zip

[sacarde]

http://wiki.ubuntu-it.org/Hardware/Video/Nvidia

[UomoAzione]

Ho fatto anche come dicono loro... il problema non è l'installazione dei driver, che si conclude felicemente, ma la possibilità di cambiare risoluzione ho provato anche usare guide per settare a mano xorg.config ma niente da fare sullo schermo mi appaiono 6 finestrine uguali ognuna con una risoluzione 320x200 o qualcosa del genere... uff devo rinunciare a usare ubuntu???

[sacarde]

provato a riconfigurare?

sudo dpkg-reconfigure -phigh xserver-xorg

[UomoAzione]

Originariamente inviato da sacarde

provato a riconfigurare?

sudo dpkg-reconfigure -phigh xserver-xorg

non succede nulla purtroppo, chiede la passoword (se ben ricordo) e non succede niente... ho provato sia con la versione 190 che con la 185 ma nada...

[Chiancheri]

leggo che hai uno sli in firma, è così??

cmq magari hai incasinato tutto facendo mille prove.... Se ti è possibile formatta.... Al momento del primo avvio segui questa scaletta:

1) aggiorna il sistema ed in fine riavvia

2) vai su Sistema > Amministrazione > Driver Hardware e installi, infine riavvia.

e vedi che succede

[UomoAzione]

Scusate ho dimenicato di dire che lo sto installando sul mio portatile Packard Bell
TJ65 con vga 240M

[Gimli[2BV!2B]]

Prova ad installare la suite di programmini xresprobe:

sudo apt-get install xresprobe

Dopodiché prova ad eseguire ddcprobe:

sudo ddcprobe | less

Se alla prima esecuzione dovesse andare in errore, riprova e scrivici il risultato.

Ipotizzo che l'elemento che crea il tuo problema sia il monitor, che non comunica correttamente le informazioni EDID.

Altro elemento fondamentale per analizzare il problema è il contenuto del log /var/log/Xorg.0.log

[UomoAzione]

vbe: VESA 3.0 detected.
oem: NVIDIA
vendor: NVIDIA Corporation
product: GT216 Board - 0696a340 Chip Rev
memory: 14336kb
mode: 640x400x256
mode: 640x480x256
mode: 800x600x16
mode: 800x600x256
mode: 1024x768x16
mode: 1024x768x256
mode: 1280x1024x16
mode: 1280x1024x256
mode: 320x200x64k
mode: 320x200x16m
mode: 640x480x64k
mode: 640x480x16m
mode: 800x600x64k
mode: 800x600x16m
mode: 1024x768x64k
mode: 1024x768x16m
mode: 1280x1024x64k
mode: 1280x1024x16m
edid: 
edidfail

E l'altro

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux ShinSekai 2.6.31-16-generic #52-Ubuntu SMP Thu Dec 3 22:07:16 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=3363dcc4-1091-400a-9917-b45dbb791629 ro quiet splash
Build Date: 26 October 2009  05:19:56PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec  6 16:20:03 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0xb40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0a34:1025:0219 nVidia Corporation rev 162, Mem @ 0xf0000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  185.18.36  Fri Aug 14 18:27:24 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  185.18.36  Fri Aug 14 17:51:02 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "UseEDID" "False"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): Ignoring EDIDs
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(GPU-0): Not probing EDID on DFP-0.
(II) NVIDIA(0): NVIDIA GPU GeForce GT 240M (GT216) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 1048576 kBytes
(--) NVIDIA(0): VideoBIOS: 70.16.1f.00.01
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce GT 240M at PCI:1:0:0:
(--) NVIDIA(0):     DFP-0
(--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-0: Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 640 x 480
(WW) NVIDIA(0): Unable to get display device DFP-0's EDID; cannot compute DPI
(WW) NVIDIA(0):     from DFP-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0):     enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Logitech USB Receiver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event7"
(II) Logitech USB Receiver: Found 1 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) Logitech USB Receiver: Adding scrollwheel support
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(EE) Logitech USB Receiver: failed to initialize for relative axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device CNF7017
(**) CNF7017: always reports core events
(**) CNF7017: Device: "/dev/input/event8"
(II) CNF7017: Found keys
(II) CNF7017: Configuring as keyboard
(II) XINPUT: Adding extended input device "CNF7017" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event12"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event6"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.

[Gimli[2BV!2B]]

Ok, sembra proprio colpa dell'EDID:

edid:
edidfail

(WW) NVIDIA(0): Unable to get display device DFP-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from DFP-0's EDID.

(potresti editare il post mettendo il log tra i tag CODE?)

Prima di cominciare a cercare i dati necessari: se esegui il comado ddcprobe un paio di volte di seguito riesci ad ottenere i dati edid in almeno una esecuzione?
In caso di risposta negativa specifica precisamente il modello del tuo monitor, eventualmente tirane fuori il manuale.

Specifica anche la risuluzione che ti interessa impostare e la frequenza verticale/refresh.

[UomoAzione]

Ciao, ho provato e non me lo da mai...

Il modello del mio portatile è Packard Bell tj65-DT-120it ma purtroppo non c'è modo di capire che monitor monta... in internet non ho trovato nulla e sui manuali ovviamente non è menzionato

[Gimli[2BV!2B]]

Sì, scusa, ho letto adesso il post in cui dicevi che è un notebook.

Dunque, non sono riuscito a trovare la frequenza verticale del monitor, mentre la risoluzione dovrebbe essere 1366 x 768, esatto?
Ricordi qual'è la frequenza di refresh corretta? Se sul manuale non è proprio presente, se hai ancora Win installato dovresti rintracciarla nelle opzioni avanzate del monitor.

[UomoAzione]

ah scusa, mi sono dimenticato di scrivere che vorrei impostare la ris di 1366x768 @ 60hz!

edit: controllo un attimo riavviando in windows per assicurarmi che sia 60hz!

[UomoAzione]

si, è a 60hz...

[Gimli[2BV!2B]]

Però ho notato ora che hai già impostato l'opzione Option "UseEDID" "False" in /etc/X11/xorg.conf, perché?

Se la commenti cosa succede? E' frutto di un tentativo successivo all'installazione?

[UomoAzione]

potrebbe essere... non mi creava piu il file xorg.config, o meglio, ne creava uno nuovo allora ci ho sbattuto dentro un vechcio backup automatico.................

devo provare a mettere "true"??

edit: avevo anche provato ad aggiungere una linea per aggiungere una custom resolution (Avevo trovato una sorta di guida in itnernet... ma niente da fare)

[Gimli[2BV!2B]]

Sì, prova a commentare quella riga o a mettere true, poi riavvia il server grafico.

Se ancora non funziona proveremo un metamode manuale.

[UomoAzione]

ho messo true ma col comando che mi hai dato qualche post sopra continua a darmi edidfail

[Gimli[2BV!2B]]

Ok, facciamo in questo modo: posta il contenuto del tuo /etc/X11/xorg.conf

Il modeline che andrò ad impostare l'ho calcolato in questo modo:

cvt 1366 768 60 -v

ed ha questi valori:

# 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz
Modeline "1368x768_60.00"   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync

Probilmente è simile al tentativo che hai citato prima, ma è facile fare piccole imprecisioni che non lo fanno funzionare, quindi vediamo che succede con il file che ti costruisco...

[UomoAzione]

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder58)  Tue Oct 20 21:26:01 PDT 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder58)  Tue Oct 20 21:25:04 PDT 2009

Section "Monitor"
	Identifier     "Monitor0"
	VendorName     "Unknown"
	ModelName      "DFP-0"
	HorizSync       28.0 - 33.0
	VertRefresh     43.0 - 72.0
	Option         "DPMS"
1366x768 @ 60.00 Hz (GTF) hsync: 60.15 kHz; pclk: 81.80 MHzModeline "1366x768_60.00"  81.80  1024 1080 1192 1360  768 769 772 802  -HSync +Vsync
EndSection

Section "Screen"
	Identifier     "Screen0"
	Device         "Device0"
	Monitor        "Monitor0"
#	Option         "UseEdid" "True"
	Option         "TwinView" "0"
	Option         "metamodes" "nvidia-auto-select +0+0"
	DefaultDepth	24
	SubSection "Display"
		Depth       24
		Modes     "1366x768_60.00"
	EndSubSection
EndSection

Section "Module"
	Load	"dri"
	Load	"GLcore"
EndSection

Section "InputDevice"
	Identifier     "Mouse0"
	Driver         "mouse"
	Option         "Protocol" "auto"
	Option         "Device" "/dev/psaux"
	Option         "Emulate3Buttons" "no"
	Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
	Identifier     "Keyboard0"
	Driver         "kbd"
	# generated from default
EndSection

Section "ServerLayout"
	Identifier     "Layout0"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "Mouse0" "CorePointer"
	Option         "Xinerama" "0"
EndSection

Section "Device"
	Identifier     "Device0"
	VendorName     "NVIDIA Corporation"
	BoardName      "GeForce GT 240M"
	Driver	"nv"
EndSection