Come va il mio disco?

[bbrun]

Salve, ho controllato il mio disco rigido con Parted Magic 4.
Il disco è un Maxtor da 80 Gb.
Gentilmente, mi potreste spiegare cosa vuol dire quell'insieme di Cino-Arabo-Indiano che è venuto fuori?
Purtroppo la cosa è resa ancora più difficile dall'esposizione del tutto nel file TXT in cui ho salvato il risultato del test, scusate e abbiate pazienza.
Le mie preoccupazioni dipendono da quel ricorrente:
"Error XXXX occurred at disk power-on lifetime: 1232 hours (51 days + 8 hours)", che vuol dire? Che il mio disco ha i giorni contati?

Grazie.

Ecco il Log.

Complete error log:

SMART Error Log Version: 1
Warning: ATA error count 3288 inconsistent with error log pointer 5
ATA Error Count: 3288 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3288 occurred at disk power-on lifetime: 1232 hours (51 days + 8 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 e4 0b 48 e0 Error: ICRC, ABRT at LBA = 0x00480be4 = 4721636

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 01 e4 0b 48 e0 08 02:11:36.688 READ DMA
ef 03 45 13 8f 87 e0 08 02:11:36.688 SET FEATURES [Set transfer mode]
c6 ff 10 13 8f 87 e0 08 02:11:36.688 SET MULTIPLE MODE
10 ff 50 13 8f 87 e0 08 02:11:36.688 RECALIBRATE [OBS-4]
91 03 3f 13 8f 87 ef 08 02:11:36.688 INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 3287 occurred at disk power-on lifetime: 1232 hours (51 days + 8 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 e3 0b 48 e0 Error: ICRC, ABRT at LBA = 0x00480be3 = 4721635

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 01 e3 0b 48 e0 08 02:11:36.592 READ DMA
ef 03 45 10 8f 87 e0 08 02:11:36.592 SET FEATURES [Set transfer mode]
c6 ff 10 10 8f 87 e0 08 02:11:36.592 SET MULTIPLE MODE
10 ff 50 10 8f 87 e0 08 02:11:36.592 RECALIBRATE [OBS-4]
91 03 3f 10 8f 87 ef 08 02:11:36.592 INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 3286 occurred at disk power-on lifetime: 1232 hours (51 days + 8 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 e2 0b 48 e0 Error: ICRC, ABRT at LBA = 0x00480be2 = 4721634

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 01 e2 0b 48 e0 08 02:11:36.496 READ DMA
ef 03 45 0e 8f 87 e0 08 02:11:36.496 SET FEATURES [Set transfer mode]
c6 ff 10 0e 8f 87 e0 08 02:11:36.496 SET MULTIPLE MODE
10 ff 50 0e 8f 87 e0 08 02:11:36.496 RECALIBRATE [OBS-4]
91 03 3f 0e 8f 87 ef 08 02:11:36.496 INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 3285 occurred at disk power-on lifetime: 1232 hours (51 days + 8 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 e1 0b 48 e0 Error: ICRC, ABRT at LBA = 0x00480be1 = 4721633

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 01 e1 0b 48 e0 08 02:11:36.400 READ DMA
ef 03 45 0c 8f 87 e0 08 02:11:36.400 SET FEATURES [Set transfer mode]
c6 ff 10 0c 8f 87 e0 08 02:11:36.400 SET MULTIPLE MODE
10 ff 50 0c 8f 87 e0 08 02:11:36.400 RECALIBRATE [OBS-4]
91 03 3f 0c 8f 87 ef 08 02:11:36.400 INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 3284 occurred at disk power-on lifetime: 1232 hours (51 days + 8 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 e1 0b 48 e0 Error: ICRC, ABRT at LBA = 0x00480be1 = 4721633

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 10 e1 0b 48 e0 08 02:11:36.304 READ DMA
c8 ff 01 f0 0b 48 e0 08 02:11:36.304 READ DMA
c8 ff 01 ef 0b 48 e0 08 02:11:36.304 READ DMA
c8 ff 01 ee 0b 48 e0 08 02:11:36.304 READ DMA
c8 ff 01 ed 0b 48 e0 08 02:11:36.304 READ DMA