Miglior settaggio di alice adsl

[Wallè]

ho eseguito un test su speedguide e qst sono i risultati...

TCP options string = 020405ac01010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.
Default TCP Receive Window (RWIN) = 16384
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 16384

For optimum performance, consider changing RWIN to a multiple of MSS.
Other RWIN values that might work well with your current MTU/MSS:
63888 (up to 2 Mbit lines, depending on latency. MSS * 44)
127776 (1-5 Mbit lines, depending on latency. MSS * 44 * 2)
255552 (2-14 Mbit lines, depending on latency. MSS * 44 * 2^2)
511104 (8-30 Mbit lines, depending on latency. MSS * 44 * 2^3)
1022208 (25-60 Mbit lines depending on latency. MSS * 44 * 2^4)
bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 655 kbps (82 KBytes/s) @ 200ms
Your TCP Window limits you to: 262 kbps (33 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 104 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)


Vorrei sapere se c'è qlcs ke nn va oppure qlcs da migliorare e il modo x farlo^^ Grazie mille in anticipo x le risposte

[BTS]

provato l'mtu a 1500?

[Wallè]

Originariamente inviato da BTS

provato l'mtu a 1500?

no xkè nn so come modificarlo....premetto che nn ho il modem di alice