Esperienza con Dell SAS 5/iR Adapter

[matrix845]

Ciao ragazzi , ho appena ricevuto il mio serverino per i test in ufficio , un Dell PE SC 440 Dual core Xeon , che monta un controller raid SAS 5/iR Adapter , ed ha due dischi sata da 250 Giga.

Premesso cio , vorrei configurali in raid 1 , ma non ci ho capito una mazza , ho installato debian etch e vede tutte le periferiche ,

questo è lspci:

00:00.0 Host bridge: Intel Corporation E7230 Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation E7230 PCI Express Root Port
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A (rev 09)
02:08.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS (rev 01)
04:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (rev 06)
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02)
06:07.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02

e questo il -n

00:00.0 0600: 8086:2778
00:01.0 0604: 8086:2779
00:1c.0 0604: 8086:27d0 (rev 01)
00:1c.4 0604: 8086:27e0 (rev 01)
00:1c.5 0604: 8086:27e2 (rev 01)
00:1d.0 0c03: 8086:27c8 (rev 01)
00:1d.1 0c03: 8086:27c9 (rev 01)
00:1d.2 0c03: 8086:27ca (rev 01)
00:1d.3 0c03: 8086:27cb (rev 01)
00:1d.7 0c03: 8086:27cc (rev 01)
00:1e.0 0604: 8086:244e (rev e1)
00:1f.0 0601: 8086:27b8 (rev 01)
00:1f.1 0101: 8086:27df (rev 01)
00:1f.2 0101: 8086:27c0 (rev 01)
00:1f.3 0c05: 8086:27da (rev 01)
01:00.0 0604: 8086:032c (rev 09)
02:08.0 0100: 1000:0054 (rev 01)
04:00.0 0200: 8086:107d (rev 06)
05:00.0 0200: 14e4:167a (rev 02)
06:07.0 0300: 1002:515e (rev 02)

Quindi senmbra vederlo.... ma ora non so cdove sbattere la capoccia per configurarlo a dovere !!


Voi avete qualche dritta da darmi , per non rischiare di distruggerlo appena arrivato?



Grazie mille


Pierpaolo

[matrix845]

uppettino x me!!!

[shingo]

ma il raid1 lo definisci nel bios del controller, mica da s.o. All'avvio dovresti vedere la dicitura del raid con i tasti da premere per accedere...