Aiuto con q6000

[clorinda]

Ciao a tutti vi mando uno screen con i miei risultati.



Windows xp -Mb asus p5kc -Core 2 quad @3150 -4gb di ram- asus en8600gt



Processor 1 (ID = 0)
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q6600
Codename Kentsfield
Specification Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Package Socket 775 LGA (platform ID = 4h)
CPUID 6.F.B
Extended CPUID 6.F
Core Stepping G0
Technology 65 nm
Core Speed 3150.3 MHz (7.0 x 450.0 MHz)
Rated Bus speed 1800.2 MHz
Stock frequency 2400 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 4096 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 9.0x
max VID 1.263 V
Features XD, VT


Voltage sensor 0 1.34 Volts [0xA7] (CPU VCORE)
Voltage sensor 1 11.88 Volts [0xD5] (+12V)
Voltage sensor 2 3.33 Volts [0xD0] (AVCC)
Voltage sensor 3 3.31 Volts [0xCF] (+3.3V)
Voltage sensor 4 1.44 Volts [0xB4] (VIN1)
Voltage sensor 5 5.04 Volts [0xD2] (+5V)
Voltage sensor 6 1.45 Volts [0xB5] (VIN3)
Temperature sensor 0 32°C (89°F) [0x20] (SYSTIN)
Temperature sensor 1 35°C (94°F) [0x46] (CPUTIN)
Temperature sensor 2 122°C (250°F) [0xF3] (AUXTIN)
Fan sensor 1 2744 RPM [0x7B] (CPUFANIN0)
Fan sensor 2 2722 RPM [0xF8] (AUXFANIN0)
Fan sensor 4 1023 RPM [0xA5] (AUXFANIN1)


Northbridge Intel P35/G33/G31 rev. A2
Southbridge Intel 82801IB (ICH9) rev. 02
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual (Symmetric)
Memory Frequency 450.0 MHz (1:1)
CAS# 5.0
RAS# to CAS# 5
RAS# Precharge 5
Cycle Time (tRAS) 18
Command Rate 2T
Dove sbaglio!

[PaVi90]

Eccellente

Ma vuoi overcloccarlo ancora?

Non mi è ben chiaro lo scopo del tuo post...