Posso montare questo processore?

[pasqua80]

Posso montare un E6600 su questa mainboard?

allego i risultati di cpu-z

-------------------------
CPU-Z version 1.42
-------------------------

Processors Map
------------------------------------------------------------------------------------

Number of processors 1
Number of threads 2

Processor 0
-- Core 0
-- Thread 0
-- Thread 1


Processors Information
------------------------------------------------------------------------------------

Processor 1 (ID = 0)
Number of cores 1
Number of threads 2 (max 2)
Name Intel Pentium 4 521
Codename Prescott
Specification Intel(R) Pentium(R) 4 CPU 2.80GHz
Package Socket 775 LGA (platform ID = 4h)
CPUID F.4.9
Extended CPUID F.4
Core Stepping G1
Technology 90 nm
Core Speed 2792.9 MHz (14.0 x 199.5 MHz)
Rated Bus speed 798.0 MHz
Stock frequency 2800 MHz
Instructions sets MMX, SSE, SSE2, SSE3, EM64T
L1 Data cache 16 KBytes, 8-way set associative, 64-byte line size
Trace cache 12 Kuops, 8-way set associative
L2 cache 1024 KBytes, 8-way set associative, 64-byte line size
FID/VID Control no
Features XD

Chipset
------------------------------------------------------------------------------

Northbridge Intel i945G/GZ rev. A2
Southbridge Intel 82801GB (ICH7/R) rev. A1
Memory Type DDR2
Memory Size 2048 MBytes
Channels Dual
Memory Frequency 332.5 MHz (3:5)
CAS# 5.0
RAS# to CAS# 5
RAS# Precharge 5
Cycle Time (tRAS) 15
Bank Cycle Time (tRC) 21

Memory SPD
------------------------------------------------------------------------------

DIMM #1

General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) (0000000000000000)
Size 1024 MBytes
Max bandwidth PC2-5300 (333 MHz)
Part number

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no

Timings table
Frequency (MHz) 200 266 333
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 3 4 5
RAS# Precharge 3 4 5
TRAS 9 12 15
TRC 12 16 20

DIMM #2

General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Melco (7F7F7F8300000000)
Size 1024 MBytes
Max bandwidth PC2-5300 (333 MHz)
Part number

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no

Timings table
Frequency (MHz) 200 266 333
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 3 4 5
RAS# Precharge 3 4 5
TRAS 9 12 15
TRC 12 16 20

Ciao e grazie x la disponibilità...

[Daemon_RaDicaL]

parrebbe di si

http://www.intel.com/products/chipsets/945g/index.htm

[sistel@b]

Il chipset 945 supporta il Core2 però bisogna vedere se lo supporta anche la main board perché nonostante il chipset, il bios potrebbe non riconoscere la cpu e quindi non supportarla. Dovresti vedere, sempre in CPU-Z, il modello di mainboard; da quello si può capire se supporta il processore direttamente, se ha bisogno di un aggiornamento del bios per supportarlo o se proprio non c'è speranza. Ciao!