[Problema] con software masterizz.

[Hp16]

Ciao ho un pc nuovo con un masterizzatore dvd di marca sconosciuta (bulk) quando provo a masterizzare con uno dei due -->

# Cd Burner Xp: suite simile a Nero Burning Rom
# DeepBurner Free: suite simile a Nero Burning Rom

cd burn mi dice error TAO mode ecc l'altro mi dice done e invece non scrive na cippa...

che fo?

[Jammed_Death]

hai provato altri software? ci sono varie trial, come nero, ashampoo ecc...prova anche questi e fammi sapere...nel pannello di controllo dei vari software dovrebbe esserci il nome del lettore dvd (magari il codice), copialo qua...può essere che sia un lg, di solito non hanno simboli e nomi sul frontalino

[Hp16]

masterizzatore dovrebbe essere ATAPI DVD DC 16X8X5 SCSI CdRom Device

e il cdrom : HL-DT-ST DVD-ROM GRD8164B SCSI CdRom Device (questo è LG sul frontalino c'è il simbolo ma sul mast. non c'è nulla)

[andrea.ippo]

Sì, l'ultimo è un LG, lo riconosco dalla sigla.
Ho un'unità cd-rw da 6-7 anni e non ha mai sbagliato un colpo, perfetta.

Sei sicuro che il tuo masterizzatore supporti il disco inserito?
Il mio NEC DVD-rw non riconosceva i dvd-r FUJIFILM, per poterli scrivere ho dovuto aggiornare il firmware.
Quindi prova con un altro tipo di supporto, prima di installare quel mattone di Nero

PS: io sono un felice utilizzatore di Deep Burner

[Hp16]

ho provato 1 tdk cd-r80 e un cd-r74 boh ora rovisto per trovare altro ma non ho molti cd vergini :_:

[Hp16]

Anche con Nero non va :_( ecco il log

Pro

windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Nero\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20.18.04 
Versione Nero: 6.3.0.5 (Nero Express)
Masterizzatore:       <ATAPI DVD DC 16X8X5>     Versione: 103  - HA 4 TA 0 - 6.3.0.5
 Driver Adattatore:   <JRAID>                   HA 4
 Drive buffer  :      2048kB
 Bus Type      :      via Inquiry data (1) -> ATAPI, detected: ?
 Connected to MMC as unknown drive with class-nr : 11
 Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM:               <HL-DT-ST DVD-ROM GDR8164B>Versione: 0L06 - HA 4 TA 1 - 6.3.0.5
 Driver Adattatore:   <JRAID>                   HA 4

=== Scsi-Device-Map ===
DiskPeripheral       : MAXTOR STM3320820AS              atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : ATAPI   DVD DC 16X8X5   103      JRAID Port 4 ID 0  DMA: Off
CdRomPeripheral      : HL-DT-STDVD-ROM GDR8164B0L06     JRAID Port 4 ID 1  DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD DC 16X8X5        E:   CDRom0
HL-DT-ST DVD-ROM GDR8164   F:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
CmdQueuing     : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed     : 0
BUFE           : 0
Physical memory     : 2046MB (2095532kB)
Free physical memory: 1490MB (1526340kB)
Memory in use       : 27 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

20.5.2007
CD-ROM (ISO)
8.53.22	#1 Text 0 File Isodoc.cpp, Line 6035
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : TAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
8.53.22	#2 Phase 87 File dlgbrnst.cpp, Line 1802
	Seamless Link attivato
	
8.53.22	#3 Text 0 File Reader.cpp, Line 118
	Reader running
	
8.53.22	#4 Text 0 File Writer.cpp, Line 124
	Writer ATAPI    DVD DC 16X8X5    running
	
8.53.22	#5 ISO9660GEN -11 File geniso.cpp, Line 3898
	First writeable address = 0 (0x00000000)
	
8.53.22	#6 Text 0 File Burncd.cpp, Line 3101
	Turn on Track-at-once, using CD-R/RW media
	
8.53.22	#7 Text 0 File DlgWaitCD.cpp, Line 244
	Last possible write address on media:   359848 ( 79:59.73)
	Last address to be written:             309536 ( 68:49.11)
	
8.53.22	#8 Text 0 File DlgWaitCD.cpp, Line 249
	Write in overburning mode: FALSE
	
8.53.22	#9 Text 0 File DlgWaitCD.cpp, Line 2100
	Recorder: ATAPI DVD DC 16X8X5;
	   CDR code: 00 97 24 26; OSJ entry from: Computer Support Italy s.r.l.
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 A0, 2: 61 18 1A (LI 97:24.26), 3: 4F 3B 4A (LO 79:59.74)
	     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
	
8.53.22	#10 Text 0 File DlgWaitCD.cpp, Line 410
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8.53.22	#11 Text 0 File ThreadedTransferInterface.cpp, Line 809
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (CTransferItem)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 309537 (309537) = #309537/68:47.12
	    relocatable, disc pos for caching/writing not required/required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 309535 blocks [ATAPI    DVD DC 16X8X5   ]
	--------------------------------------------------------------
	
8.53.22	#12 Text 0 File ThreadedTransferInterface.cpp, Line 978
	Prepare recorder [ATAPI    DVD DC 16X8X5   ] for write in TAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200     634238976, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	  309537 | lead-out |   1 |   0x00 |  0x41
	
8.53.22	#13 Text 0 File ThreadedTransferInterface.cpp, Line 1024
	Removed 2 run-out blocks from end of track 1. Length: 309537 -> 309535.
	
8.53.22	#14 Phase 24 File dlgbrnst.cpp, Line 1802
	Inizio ottimizzazione file
	
8.53.26	#15 Text 0 File Burncd.cpp, Line 4084
	Cache writing successful.
	
8.53.26	#16 Phase 25 File dlgbrnst.cpp, Line 1802
	Ottimizzazione file completata
	
8.53.26	#17 Phase 36 File dlgbrnst.cpp, Line 1802
	Inizio scrittura a 16x (2.400 KB/s)
	
8.53.26	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2294
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
8.53.26	#19 Text 0 File Mmc.cpp, Line 19695
	Set BUFE: Seamless Link -> ON 
	
8.53.57	#20 SCSI -1024 File Cdrdrv.cpp, Line 1439
	SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x04F10000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x08
	Sense Qual: 0x03
	CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x10 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 
	            0x4C 0x7D 0x00 0x00 0x08 0x03 
	
8.53.57	#21 CDR -1024 File Writer.cpp, Line 301
	Errore di comunicazione
	
8.53.57	#22 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
8.53.57	#23 Text 0 File ThreadedTransfer.cpp, Line 223
	conversion idle, stopping reader
	
8.53.57	#24 CDR -201 File WriterStatus.cpp, Line 196
	Stato di scrittura non valido
	ATAPI DVD DC 16X8X5\H4 T0
	
8.53.57	#25 TRANSFER -18 File WriterStatus.cpp, Line 196
	Non è possibile eseguire FineTraccia
	
8.53.57	#26 Text 0 File Mmc.cpp, Line 14549
	<ATAPI   DVD DC 16X8X5   > start Close Session
	
8.53.57	#27 SCSI -1023 File Cdrdrv.cpp, Line 1179
	SCSI Exec, HA 4, TA 0, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x2C
	Sense Qual: 0x00
	CDB Data:   0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x2C 0x00 
	
8.53.57	#28 CDR -1023 File WriterStatus.cpp, Line 245
	Errore nella sequenza dei comandi
	
8.53.57	#29 TRANSFER -19 File WriterStatus.cpp, Line 245
	Impossibile eseguire ChiusuraCd
	
8.53.57	#30 Text 0 File WriterStatus.cpp, Line 254
	falling back to disc fixation
	
8.53.57	#31 Text 0 File dlgbrnst.cpp, Line 1660
	Set remaining time: 0:00,000 (0ms) -> OK
	
8.53.57	#32 Phase 38 File dlgbrnst.cpp, Line 1802
	Scrittura fallita a 16x (2.400 KB/s)
	

Existing drivers:
File 'Drivers\jraid.sys': Ver=1.14.00.00 built by: WinDDK, size=41728 bytes, created 20/07/2006 15.39.24 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Hp16]

up

[ATi7500]

gia' provato ad aggiornare il firmware?

bYeZ!