CONROE

[bjgenes34]

Ho un Barebone V2-P5G965 e vorrei mettergli un Conroe E6600, Vedendo la scheda tecnica dice che supporta Intel P4 up to 3.8 GHz and (Prescott, Smithfield,Cadarmill,Presler, Conroe,Kentsfield).
http://www.asus.com/products.aspx?l1...39&modelmenu=2
Andando però sempre sul sito della Asus e ho visto la scheda della compatibilità con la CPU in (CPU SUPPORT) e non ho trovato il conroe E6600, ma bensì questa lista:
Celeron D 347 (revD0,65nm,3.06GHz, 533 FSB, L2:512KB, LGA775)
Celeron D 351 (3.2 GHz, 533 FSB, revG1, LGA775) ALL 0109
Celeron D 352 (revC1,65nm,3.20 GHz, 533 FSB, L2:512KB, LGA775)
Celeron D 355 (3.33 GHz, 533 FSB, L2:256KB, revG1, LGA775)
Celeron D 356 (revB1, 65nm,3.33 GHz, 533 FSB, L2:512KB, LGA775)
Celeron D 356 (revC1,65nm,3.33 GHz, 533 FSB, L2:512KB, LGA775)
Core 2 Duo E4300 (1.8GHz,800FSB,L2:2MB,65W,rev.L2) ALL 0408
Core 2 Extreme QX6700 (4 cores,2.66GHz,1066FSB,L2:2X4MB,rev.B3)
P4-506 (2.66 GHz) (533 FSB, EM64T, revG1)
P4-511 (2.8 GHz) (533 FSB, EM64T, revG)
P4-524 (3.06GHz, 533 FSB,HT, L2 1M, revG1)
P4-551 (3.4GHz, 800 FSB, L2 1MB, revG1)
P4-631 (65nm,3.0GHz, 800 FSB, L2:2MB, revC1)
P4-631 (65nm,3.0GHz, 800 FSB, L2:2MB, revD0)
P4-641 (65nm,3.2GHz, 800 FSB, L2:2MB, revC1)
P4-641 (65nm,3.2GHz, 800 FSB, L2:2MB, revD0)
P4-651 (65nm,3.4GHz, 800 FSB, L2:2MB, revC1)
P4-651 (65nm,3.4GHz, 800 FSB, L2:2MB, revD0)
P4-661 (65nm,3.6GHz, 800 FSB, L2:2MB, revC1)
P4-661 (65nm,3.6GHz, 800 FSB, L2:2MB, revD0)
Pentium D 915(2.8GHz, 800 FSB, L2 4MB, revD0,without VT function) Pentium D 925(3.0GHz, 800 FSB, L2 4MB, revD0, without VT function)
Pentium D 930(3.0GHz, 800 FSB, L2 4MB, revC1)
Pentium D 940(3.2GHz, 800 FSB, L2 4MB, revC1)
Pentium D 950(3.4GHz, 800 FSB, L2 4MB, revC1)
Pentium D 960(3.6GHz, 800 FSB, L2 2X2MB, revD0)
Pentium D 960(3.6GHz, 800 FSB, L2 4MB, revC1)
Secondo voi è possibile installare il processore E6600?

[bjgenes34]

SPOSTATO SU PROCESSORI.
E GIA' RISPOSTO GRAZIE