Kubuntu edgy [ATI 2 schermi, boot lento causa network]

risolto editando il file /network/interfaces

non ho risolto xorg.conf e 2 schermi, come tenere il secondo come primario e il primo "spento"

[trogo]

Originariamente inviato da NLDoMy

ho provato sia dal tool asus sia con lo xorg.conf e la configurazione nel pannello delle impostazioni di kde... ma si può fare?

Si può sicuramente fare (la modalità a + schermi si chiama clone, ma non è l'unica esistente), e la risposta la troverai in xorg.conf (di certo non nella utility della ati!)! L'unico consiglio che posso darti è di leggere la documentazione di xorg.conf!

Originariamente inviato da NLDoMy

Ultima cosa, il boot lento, perchè si pianta mezzora con la scheda di rete, collegata ad un router, anche con ip statico assegnato sta li fermo per qualche minuto... con crtl+c non succede niente, e cmq devo avviare senza usplash nei parametri di boot per poter vedere cosa diavolo stia facendo...

Con o senza splash sai che il problema è l'avvio da rete, no? Se non hai bisogno di avviare da rete disabilita questa funzionalità (magari con il tool di configurazione bum, presente nelle repo)

ora riprovo con lo xorg.conf, cmq anche con lo xorg.conf non riesco a spengere lo schermo che "automaticamente" è settato su clone

per la network, è tutto disabilitato, ma rimane impallato a "configuring network interfaces" al boot... T_T ora provo a vedere se tante volte è la wireless a dare problemi

come da topic editato, dopo il caricamento dei servizi e delle configurazioni, il login di kubuntu mi da' l'ora, giorno e mese in inglese... perchè???

domanda per lo xorg.conf, ho 2 schermi, quello del notebook lo vorrei tenere spento... qualcuno mi sa aiutare?


plz thx

[KiDdolo]

posta il tuo xorg.conf

ecco lo xorg conf con i monitors automaticamente settati da kubuntu in clone mode

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen         "Default Screen" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
	InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "it"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
	Identifier  "Synaptics Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "auto-dev"
	Option	    "HorizScrollDelta" "0"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	HorizSync    28.0 - 60.0
	VertRefresh  43.0 - 60.0
	Option	    "DPMS"
EndSection

Section "Device"
	Identifier  "Generic Video Card"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "Generic Video Card"
	Monitor    "Generic Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option	    "Composite" "0"
EndSection

sicuramente vedrete che è settato solo uno schermo, ma anche se aggiungo il secondo schermo, il primo mi segue sempre il secondo e la domandona della serata è... quale sarà lo schermo principale? quello esterno o quello del notebook?

a me basterebbe solo spengere automaticamente quello del notebook quando parte kubuntu

questo è lo xorg.conf attuale con i 2 monitors settati

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
  InputDevice "Synaptics Touchpad"
EndSection

Section "Files"
  
  # path to defoma fonts
  FontPath "/usr/share/X11/fonts/misc"
  FontPath "/usr/share/X11/fonts/cyrillic"
  FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/Type1"
  FontPath "/usr/share/X11/fonts/100dpi"
  FontPath "/usr/share/X11/fonts/75dpi"
  FontPath "/usr/share/fonts/X11/misc"
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "int10"
  Load "type1"
  Load "vbe"
  load "glx"
  load "dbe"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "it"
  option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ExplorerPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Identifier "Synaptics Touchpad"
  Driver "synaptics"
  option "SendCoreEvents" "true"
  option "Device" "/dev/psaux"
  option "Protocol" "auto-dev"
  option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
  
  # /dev/input/event
  # for USB
  Identifier "stylus"
  Driver "wacom"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
  
  # /dev/input/event
  # for USB
  Identifier "eraser"
  Driver "wacom"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
  
  # /dev/input/event
  # for USB
  Identifier "cursor"
  Driver "wacom"
  option "Device" "/dev/wacom"# Change to 
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
  identifier "Generic Monitor"
  vendorname "NEC"
  modelname "NEC MultiSync V520"
  HorizSync 31.0-70.0
  VertRefresh 55.0-120.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  gamma 1.0
EndSection

Section "Device"
  identifier "Generic Video Card"
  boardname "ati"
  busid "PCI:1:0:0"
  driver "fglrx"
  screen 0
  option "DesktopSetup" "c"
  option "ForceMonitors" "crt1,crt2"
  option "HSync2" "31.5-90"
  option "VRefresh2" "60"
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "Generic Video Card"
  Monitor "Generic Monitor"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    modes "640x480@60" "640x480@72" "640x480@75" "640x480@85" "800x600@56" "800x600@72" "800x600@75" "800x600@85" "800x600@60" "832x624@75" "1024x768@85" "1024x768@75" "1024x768@70" "1024x768@60" "1024x768@43" "1152x864@75" "1280x960@60" "1280x1024@60" "1400x1050@60"
  EndSubSection
EndSection

Section "DRI"
  Mode 0666
EndSection

Section "device" #     
  identifier "device1"
  boardname "ati"
  busid "PCI:1:0:0"
  driver "fglrx"
  screen 1
  option "DesktopSetup" "c"
  option "ForceMonitors" "crt1,crt2"
  option "HSync2" "31.5-90"
  option "VRefresh2" "60"
EndSection
Section "screen" #     
  identifier "screen1"
  device "device1"
  defaultdepth 24
  monitor "monitor1"
  SubSection "Display"
    depth 24
    modes "640x480@60" "800x600@60" "1024x768@60" "1280x1024@60" "1600x1200@60" "1792x1344@60" "1856x1392@60" "1920x1440@60"
  EndSubSection
EndSection
Section "monitor" #     
  identifier "monitor1"
  vendorname "Generic"
  modelname "Flat Panel 1280x800"
  HorizSync 31.5-90
  VertRefresh 60
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
  modeline  "1856x1392@60" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
  modeline  "1920x1440@60" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
  gamma 1.0
EndSection
Section "ServerFlags"
EndSection

Section "Extensions"
  option "Composite" "0"
EndSection

[KiDdolo]

se tu modificassi la sezione

Section "Device"
  identifier "Generic Video Card"
  boardname "ati"
  busid "PCI:1:0:0"
  driver "fglrx"
  screen 0
  option "DesktopSetup" "c"
  option "ForceMonitors" "crt1,crt2"
  option "HSync2" "31.5-90"
  option "VRefresh2" "60"
EndSection

togliendo crt1 e lasciando crt2, cioè

Section "Device"
  identifier "Generic Video Card"
  boardname "ati"
  busid "PCI:1:0:0"
  driver "fglrx"
  screen 0
  option "DesktopSetup" "c"
  option "ForceMonitors" "crt2"
  option "HSync2" "31.5-90"
  option "VRefresh2" "60"
EndSection

o viceversa, dovrebbe usare solo uno dei 2 schermi

dico "dovrebbe" perchè l'xorg con le ati è sempre stato 1 dramma x me. molto meglio in caso di nvidia!

ah ok ora appena rivado su linux riprovo, intanto ho risolto avviando kubu con schermo del note abbassato, così manco si accende e posso avere il refresh a 85hz sull'altro schermo, lo schermo laptop resta chiuso...

tutto sommato non ho da lamentarmi del pc o della ati... ma delle temperature che in idle il procio sta a 47 appena apro amule o firefox schizza sui 60... se riesco a vendere il note prendo un santech con nvidia.