linux non mi riconosce il cd rom

[texerasmo]

Ciao a tutti Linux RedHat Es non mi riconosce Il lettore CDROM.
Mi date un mano ....

[ilsensine]

Allega un dmesg

[texerasmo]

Linux version 2.6.9-5.EL ([email protected]) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 Wed Jan 5 19:22:18 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 262064
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32688 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f8da0
ACPI: RSDT (v001 A M I OEMRSDT 0x09000526 MSFT 0x00000097) @ 0x3ffb0000
ACPI: FADT (v002 A M I OEMFACP 0x09000526 MSFT 0x00000097) @ 0x3ffb0200
ACPI: MADT (v001 A M I OEMAPIC 0x09000526 MSFT 0x00000097) @ 0x3ffb0390
ACPI: OEMB (v001 A M I AMI_OEM 0x09000526 MSFT 0x00000097) @ 0x3ffc0040
ACPI: DSDT (v001 K8UNF K8UNF121 0x00000121 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c03d3000 soft=c03d2000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1607.984 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034020k/1048256k available (2055k kernel code, 13444k reserved, 655k data, 140k init, 130752k highmem)
Calibrating delay loop... 3186.68 BogoMIPS (lpj=1593344)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
CPU: After all inits, caps: 078bf3ff e3d3fbff 00000000 00000010
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Sempron(tm) Processor 2600+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 1042k freed
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUS0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LKLN] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAUI] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LKMO] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LTIE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 3 4 5 7 9 10 11 12 *14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LKSM] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:02.1[b] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 15
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 15 (level, low) -> IRQ 15
ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 9 (level, low) -> IRQ 9
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1158078368.715:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key E07BC3E85BE30CFD
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU1] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 64M @ 0xf8000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdbio
Probing IDE interface ide0...
hda: Maxtor 6L120P0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 240121728 sectors (122942 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
PS2K PS2M UAR1 USB0 MAC AC97 USB1 USB2 P0P1
Freeing unused kernel memory: 140k freed
SCSI subsystem initialized
libata version 1.02 loaded.
sata_nv version 0.03
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ata1: SATA max UDMA/133 cmd 0xF80 ctl 0xF02 bmdma 0xD800 irq 10
ata2: SATA max UDMA/133 cmd 0xE80 ctl 0xE02 bmdma 0xD808 irq 10
ata1: no device found (phy stat 00000000)
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [email protected]
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: dm-0: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 9374087
EXT3-fs: dm-0: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
inserting floppy driver for 2.6.9-5.EL
floppy0: no floppy controllers found
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:05.0 to 64
divert: allocating divert_blk for eth0
eth0: forcedeth.c: subsystem: 01849:00df bound to 0000:00:05.0
ip_tables: (C) 2000-2002 Netfilter core team
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:06.0 to 64
eth0: no link during initialization.
intel8x0_measure_ac97_clock: measured 49552 usecs
intel8x0: clocking to 46790
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 15 (level, low) -> IRQ 15
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 15, pci mem f8842c00
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 9, pci mem f890a000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI interrupt 0000:00:02.1[b] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:02.1: OHCI Host Controller
eth0: link up.
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 5, pci mem f890c000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0366c20(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ip_tables: (C) 2000-2002 Netfilter core team
ACPI: Power Button (FF) [PWRF]
eth0: no IPv6 routers present
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard on isa0060/serio0
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[2993]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[2993]: Module vmmon: initialized
/dev/vmmon[2997]: Module vmmon: unloaded
/dev/vmmon[3174]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[3174]: Module vmmon: initialized
/dev/vmnet: open called by PID 3222 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 3238 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
divert: allocating divert_blk for vmnet1
/dev/vmnet: open called by PID 3237 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 3239 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
divert: allocating divert_blk for vmnet8
/dev/vmnet: open called by PID 3268 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 3267 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present
application vmware uses obsolete OSS audio interface
ppdev: user-space parallel port driver
application vmware-serverd uses obsolete OSS audio interface

[ilsensine]

Dove hai il cdrom? (canale, master o slave...)

Potrebbe essere hdb? (primary slave?)

[texerasmo]

credo di si a questo punto.
dovrei smontare il pc?

[ilsensine]

Prova a caricare i moduli
ide-cd
cdrom
e ricattura il dmesg

[texerasmo]

brutta notizia
[root@localhost ~]# modprobe -l |grep cdrom
[root@localhost ~]# modprobe -l |grep ide-cd
il risultato per entrambi è negativo
non ho questi moduli.
Dovrei ricompilare il kernel?
Questa è un macchina dove ho i servizi di rete

[B3nd3r]

Ma avevi in precedenza ricompilato il kernel? Per caso usi settaggi particolari di udev? Oppure usi un nuovo udev con kernel poco recenti?

[ilsensine]

Originariamente inviato da texerasmo

brutta notizia
[root@localhost ~]# modprobe -l |grep cdrom
[root@localhost ~]# modprobe -l |grep ide-cd
il risultato per entrambi è negativo
non ho questi moduli.

Non li hai oppure solo compilati staticamente nel kernel. Mi sembra strano.
Se sono compilati staticamente, ne devi trovare traccia in /proc/kallsyms, se è stato abilitato sul tuo kernel (ad es. con cat /proc/kallsyms |grep ide_cdrom ) ma ad occhio direi che non ci sono proprio.

[texerasmo]

Ho lanciato il comando


[root@localhost ~]# cat /proc/kallsyms |grep ide_cdrom
c026c2c1 t ide_cdrom_error
c026c383 t ide_cdrom_abort
c026ebae t ide_cdrom_packet
c026ec5d t ide_cdrom_dev_ioctl
c026ed85 t ide_cdrom_audio_ioctl
c026eec8 t ide_cdrom_reset
c026ef19 t ide_cdrom_tray_move
c026ef4c t ide_cdrom_lock_door
c026ef56 t ide_cdrom_select_speed
c026ef82 t ide_cdrom_drive_status
c026f032 t ide_cdrom_get_last_session
c026f06c t ide_cdrom_get_mcn
c026f0a6 t ide_cdrom_check_media_change_real
c026f0dc t ide_cdrom_open_real
c026f0df t ide_cdrom_release_real
c026f0f3 t ide_cdrom_register
c026f1eb t ide_cdrom_get_capabilities
c026f279 t ide_cdrom_probe_capabilities
c026f6b1 t ide_cdrom_add_settings
c026f6db t ide_cdrom_prep_fs
c026f770 t ide_cdrom_prep_pc
c026f7e8 t ide_cdrom_prep_fn
c026f804 t ide_cdrom_setup
c026fbea t ide_cdrom_capacity
c026fc17 t ide_cdrom_cleanup
c026fcbf t ide_cdrom_complete_power_step
c026fcc0 t ide_cdrom_start_power_step
c026fe06 t ide_cdrom_attach
c026ffb2 t ide_cdrom_init

[texerasmo]

Originariamente inviato da B3nd3r

Ma avevi in precedenza ricompilato il kernel? Per caso usi settaggi particolari di udev? Oppure usi un nuovo udev con kernel poco recenti?

non ho ricompilato il kernel.

[ilsensine]

Originariamente inviato da texerasmo

Ho lanciato il comando


[root@localhost ~]# cat /proc/kallsyms |grep ide_cdrom
c026c2c1 t ide_cdrom_error
[...]

Compilato builtin. Scelta discutibile, ma non dovrebbe far male...

Non ho idea a questo punto dove sia il problema. Controlla innanzitutto che il cdrom sia effettivamente sul primary slave, che è l'unico che linux rileva (non serve aprire il computer, te lo dice il bios).

Verifica anche che il cdrom non sia per caso "morto" (parti con un livecd per prova).

Se il cdrom funziona, puoi fare solo due cose: compilarti un kernel più recente (con relativa installazione di udev aggiornato e i rischi del caso), oppure, essendo una Redhat ES, contattare la loro assistenza (ne dovreste avere diritto se avete comprato il package).

[texerasmo]

Beccato,
Il cd rom non viene riconosciuto nel bios.

[ilsensine]

Allora cdrom kaputt...