PROBLEMA CHIUSURA CD CON NERO

[pierotten]

Sto tentando disperatamente di salvare dei file su cd-rom ma ho bruciato già 4 dischi, in quanto arrivato a fine scrittura mi esce il messaggio di chiusura fallita.
Questo è il log dell'errore:

1A21-0009-6030-2376-9933-1741
1A23-0009-6030-2338-8721-3186
1A25-0806-7130-1280-5042-8055
1A47-0800-0000-1466-6372-8063
1A4C-0800-0000-1278-3505-3952

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 17.51.12
Versione Nero: 6.6.0.0 (Nero Express)
Masterizzatore: <ATAPI CD-R/RW 40X12> Versione: 1.HB - HA 1 TA 0 - 6.6.0.0
Driver Adattatore: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI CD-R/RW 40X12 >Versione: 1.HB - HA 1 TA 0 - 6.6.0.0
Driver Adattatore: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLP AS20.5 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : ATAPI CD-R/RW 40X12 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
ATAPI CD-R/RW 40X12 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 126MB (129524kB)
Free physical memory: 30MB (31460kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.9.2006
CD-ROM (ISO)
12.27.22 #1 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12.27.22 #2 Text 0 File Burncd.cpp, Line 2834
ATAPI CD-R/RW 40X12
Seamless Link attivato

12.27.36 #3 Text 0 File Reader.cpp, Line 127
Reader running

12.27.36 #4 Text 0 File Writer.cpp, Line 122
Writer ATAPI CD-R/RW 40X12 running

12.27.36 #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

12.27.37 #6 Text 0 File Burncd.cpp, Line 3119
Turn on Track-at-once, using CD-R/RW media

12.28.14 #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 310893 ( 69:07.18)

12.28.14 #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

12.28.14 #9 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: ATAPI CD-R/RW 40X12;
CDR code: 00 97 26 54; OSJ entry from: Lead Data Inc.
ATIP Data:
Special Info [hex] 1: F0 00 80, 2: 61 1A 36 (LI 97:26.54), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

12.28.14 #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Sconosciuto. Medium required by compilation: CD-R/RW.)

12.28.14 #11 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 310894 (310894) = #310894/69:5.19
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 310892 blocks [ATAPI CD-R/RW 40X12]
--------------------------------------------------------------

12.28.14 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [ATAPI CD-R/RW 40X12] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 637018112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
310894 | lead-out | 1 | 0x00 | 0x41

12.28.14 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1094
Removed 2 run-out blocks from end of track 1. Length: 310894 -> 310892.

12.28.14 #14 Phase 24 File dlgbrnst.cpp, Line 1861
Inizio ottimizzazione file

12.28.15 #15 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.

12.28.15 #16 Phase 25 File dlgbrnst.cpp, Line 1861
Ottimizzazione file completata

12.28.15 #17 Phase 36 File dlgbrnst.cpp, Line 1861
Inizio scrittura a 4x (600 KB/s)

12.28.15 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12.28.15 #19 Text 0 File Mmc.cpp, Line 20542
Set BUFE: Seamless Link -> ON

12.45.47 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12.45.57 #21 Text 0 File Mmc.cpp, Line 15346
<ATAPI CD-R/RW 40X12 > start Close Session

12.47.18 #22 CDR -1080 File ThreadedTransferInterface.cpp, Line 1244
Disco non presente

12.47.18 #23 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1244
Impossibile eseguire ChiusuraCd

12.47.18 #24 Text 0 File Mmc.cpp, Line 15346
<ATAPI CD-R/RW 40X12 > start Close Session

12.47.18 #25 SCSI -1080 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x00

12.47.18 #26 CDR -1080 File ThreadedTransferInterface.cpp, Line 1244
Disco non presente

12.47.18 #27 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1244
Impossibile eseguire ChiusuraCd

12.47.18 #28 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK

12.47.19 #29 Phase 38 File dlgbrnst.cpp, Line 1861
Scrittura fallita a 4x (600 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 01/07/2006 18.18.13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 1.27.50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[pierotten]

[skirzo]

dal log sembra che tu scriva un disco multisessione quindi non può finalizzare il cd.
guarda nelle opzioni, non ricordo come sono in nero express cmq non dovrebbero essere distanti da quelle di nero normale. cerca di attivare la finalizzazione del cd e deseleziona la multisessione, oppure cerca e attiva disc-at-once (DAO) e non track-at-once (TAO)

[pierotten]

Originariamente inviato da skirzo

dal log sembra che tu scriva un disco multisessione quindi non può finalizzare il cd.
guarda nelle opzioni, non ricordo come sono in nero express cmq non dovrebbero essere distanti da quelle di nero normale. cerca di attivare la finalizzazione del cd e deseleziona la multisessione, oppure cerca e attiva disc-at-once (DAO) e non track-at-once (TAO)

Non facevo un disco in multisessione ma avevo selezionato crea un disco in un'unica sessione e nell'altra finestra avevo selezionato solo "scrivi" e "finalizza cd".L'unica cosa che avevo di sbagliato era "track at once" ed ho cambiato in "disc at once". Ho riprovato ma stavolta mi ha dato un altro errore 2 secondi dopo l'inizio della scrittura.
(la versione di NERO è la 6)
Mi dava errore di calibrazione della temperatura e il log è:



1A21-0009-6030-2376-9933-1741
1A23-0009-6030-2338-8721-3186
1A25-0806-7130-1280-5042-8055
1A47-0800-0000-1466-6372-8063
1A4C-0800-0000-1278-3505-3952

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 17.51.12
Versione Nero: 6.6.0.0
Masterizzatore: <ATAPI CD-R/RW 40X12> Versione: 1.HB - HA 1 TA 0 - 6.6.0.0
Driver Adattatore: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI CD-R/RW 40X12 >Versione: 1.HB - HA 1 TA 0 - 6.6.0.0
Driver Adattatore: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLP AS20.5 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : ATAPI CD-R/RW 40X12 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
ATAPI CD-R/RW 40X12 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 126MB (129524kB)
Free physical memory: 28MB (28960kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.9.2006
CD-ROM (ISO)
13.52.38 #1 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13.52.38 #2 Text 0 File Burncd.cpp, Line 2834
ATAPI CD-R/RW 40X12
Seamless Link attivato

13.52.40 #3 Text 0 File Reader.cpp, Line 127
Reader running

13.52.40 #4 Text 0 File Writer.cpp, Line 122
Writer ATAPI CD-R/RW 40X12 running

13.52.40 #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

13.52.41 #6 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using CD-R/RW media

13.52.41 #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 349780 ( 77:45.55)

13.52.41 #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

13.52.41 #9 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: ATAPI CD-R/RW 40X12;
CDR code: 00 97 26 54; OSJ entry from: Lead Data Inc.
ATIP Data:
Special Info [hex] 1: F0 00 80, 2: 61 1A 36 (LI 97:26.54), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

13.52.41 #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13.52.41 #11 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 349781 (349781) = #349781/77:43.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 349781 blocks [ATAPI CD-R/RW 40X12]
--------------------------------------------------------------

13.52.41 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [ATAPI CD-R/RW 40X12] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 856631088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
349781 | lead-out | 1 | 0x00 | 0x41

13.52.49 #13 Phase 24 File dlgbrnst.cpp, Line 1861
Inizio ottimizzazione file

13.52.50 #14 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.

13.52.50 #15 Phase 25 File dlgbrnst.cpp, Line 1861
Ottimizzazione file completata

13.52.50 #16 Phase 36 File dlgbrnst.cpp, Line 1861
Inizio scrittura a 4x (600 KB/s)

13.52.53 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13.52.53 #18 Text 0 File Mmc.cpp, Line 15894
StartDAO : CD-Text - Off

13.52.53 #19 Text 0 File Mmc.cpp, Line 20542
Set BUFE: Seamless Link -> ON

13.53.37 #20 SCSI -1106 File Cdrdrv.cpp, Line 1429
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x039C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0xFF 0xFF 0xD2 0x82 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

13.53.37 #21 CDR -1106 File Writer.cpp, Line 311
Errore di calibrazione dell'alimentazione

13.53.38 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

13.53.39 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

13.53.39 #24 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK

13.53.39 #25 Phase 38 File dlgbrnst.cpp, Line 1861
Scrittura fallita a 4x (600 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 01/07/2006 18.18.13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 1.27.50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


AIUTOOOOOOOOOOOOOOOOOOOOO

[Elbryan]

Originariamente inviato da pierotten

Non facevo un disco in multisessione ma avevo selezionato crea un disco in un'unica sessione e nell'altra finestra avevo selezionato solo "scrivi" e "finalizza cd".L'unica cosa che avevo di sbagliato era "track at once" ed ho cambiato in "disc at once". Ho riprovato ma stavolta mi ha dato un altro errore 2 secondi dopo l'inizio della scrittura.
(la versione di NERO è la 6)
Mi dava errore di calibrazione della temperatura e il log è:



1A21-0009-6030-2376-9933-1741
1A23-0009-6030-2338-8721-3186
1A25-0806-7130-1280-5042-8055
1A47-0800-0000-1466-6372-8063
1A4C-0800-0000-1278-3505-3952

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 17.51.12
Versione Nero: 6.6.0.0
Masterizzatore: <ATAPI CD-R/RW 40X12> Versione: 1.HB - HA 1 TA 0 - 6.6.0.0
Driver Adattatore: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI CD-R/RW 40X12 >Versione: 1.HB - HA 1 TA 0 - 6.6.0.0
Driver Adattatore: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLP AS20.5 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : ATAPI CD-R/RW 40X12 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
ATAPI CD-R/RW 40X12 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 126MB (129524kB)
Free physical memory: 28MB (28960kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.9.2006
CD-ROM (ISO)
13.52.38 #1 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13.52.38 #2 Text 0 File Burncd.cpp, Line 2834
ATAPI CD-R/RW 40X12
Seamless Link attivato

13.52.40 #3 Text 0 File Reader.cpp, Line 127
Reader running

13.52.40 #4 Text 0 File Writer.cpp, Line 122
Writer ATAPI CD-R/RW 40X12 running

13.52.40 #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

13.52.41 #6 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using CD-R/RW media

13.52.41 #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 349780 ( 77:45.55)

13.52.41 #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

13.52.41 #9 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: ATAPI CD-R/RW 40X12;
CDR code: 00 97 26 54; OSJ entry from: Lead Data Inc.
ATIP Data:
Special Info [hex] 1: F0 00 80, 2: 61 1A 36 (LI 97:26.54), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

13.52.41 #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13.52.41 #11 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 349781 (349781) = #349781/77:43.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 349781 blocks [ATAPI CD-R/RW 40X12]
--------------------------------------------------------------

13.52.41 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [ATAPI CD-R/RW 40X12] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 856631088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
349781 | lead-out | 1 | 0x00 | 0x41

13.52.49 #13 Phase 24 File dlgbrnst.cpp, Line 1861
Inizio ottimizzazione file

13.52.50 #14 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.

13.52.50 #15 Phase 25 File dlgbrnst.cpp, Line 1861
Ottimizzazione file completata

13.52.50 #16 Phase 36 File dlgbrnst.cpp, Line 1861
Inizio scrittura a 4x (600 KB/s)

13.52.53 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13.52.53 #18 Text 0 File Mmc.cpp, Line 15894
StartDAO : CD-Text - Off

13.52.53 #19 Text 0 File Mmc.cpp, Line 20542
Set BUFE: Seamless Link -> ON

13.53.37 #20 SCSI -1106 File Cdrdrv.cpp, Line 1429
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x039C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0xFF 0xFF 0xD2 0x82 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

13.53.37 #21 CDR -1106 File Writer.cpp, Line 311
Errore di calibrazione dell'alimentazione

13.53.38 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

13.53.39 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

13.53.39 #24 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK

13.53.39 #25 Phase 38 File dlgbrnst.cpp, Line 1861
Scrittura fallita a 4x (600 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 01/07/2006 18.18.13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 1.27.50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


AIUTOOOOOOOOOOOOOOOOOOOOO

che masterizzatore hai?

[pierotten]

Originariamente inviato da Elbryan

che masterizzatore hai?

Un Benq, ma non l'ho comprato ieri, non mi ha mai dato il minimo problema.Forse devo provare con un programma alternativo a Nero (quale?)?
Il fatto però è che nemmeno Nero mi ha mai dato problemi.
Forse dovrei fare un log con Hijackthis, magari si è sballato qualcosa nel sistema.Voi che dite?

[Elbryan]

Originariamente inviato da pierotten

Un Benq, ma non l'ho comprato ieri, non mi ha mai dato il minimo problema.Forse devo provare con un programma alternativo a Nero (quale?)?
Il fatto però è che nemmeno Nero mi ha mai dato problemi.
Forse dovrei fare un log con Hijackthis, magari si è sballato qualcosa nel sistema.Voi che dite?

Che sembra tu stia usando i driver sbagliati..
Stai usando dei driver ATAPI generici o forniti da Nero?

[skirzo]

comunque sia la versione di nero è troppo vecchia, prova con una più recente