Problemi cisco 827

[kattivo]

Possiedo un cisco come elencato da topic,
Ammetto gia da subito che non sono un esperto.. ho cercato nella rete documentazioni per settare il router per una adsl alice 4mbit, seguendo i vari link, piu o meno tutti uguali.. non riesco a farlo funzionare..

questo è il mio file di conf :

DigitalRouter#show running-config
Building configuration...

Current configuration : 4205 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log uptime
no service password-encryption
!
hostname DigitalRouter
!
enable secret 5 ***
enable password ***
!
username root password 0 ***
username vpdn
username venomteam2
ip subnet-zero
no ip routing
ip domain-name kattivoadsl
ip name-server 151.99.125.2
ip name-server 80.20.6.36
ip dhcp excluded-address 192.168.0.245
ip dhcp excluded-address 192.168.1.55
!
ip dhcp pool local
network 192.168.0.0 255.255.255.0
default-router 192.168.0.245
dns-server 151.99.125.2 80.20.6.36
!
!
!
!
interface Ethernet0
ip address 192.168.0.245 255.255.255.0
ip nat inside
no ip route-cache
hold-queue 100 out
!
interface ATM0
no ip address
ip nat outside
no ip route-cache
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5snap
protocol ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
hold-queue 224 in
!
interface Dialer0
description Router ADSL
ip address negotiated
ip nat outside
encapsulation ppp
no ip route-cache
dialer pool 1
dialer-group 1
ppp pap sent-username **** password 7 *****
!
ip nat translation timeout 420
ip nat translation tcp-timeout 120
ip nat translation pptp-timeout 420
ip nat translation udp-timeout 120
ip nat translation finrst-timeout 300
ip nat translation syn-timeout 120
ip nat translation dns-timeout 300
ip nat translation icmp-timeout 120
ip nat translation port-timeout tcp 4647 10
ip nat translation port-timeout tcp 4646 10
ip nat translation port-timeout udp 4646 10
ip nat translation port-timeout udp 4645 10
ip nat translation port-timeout tcp 4645 10
ip nat translation port-timeout tcp 4644 10
ip nat translation port-timeout udp 4644 10
ip nat translation port-timeout udp 4643 10
ip nat translation port-timeout udp 4647 10
ip nat translation port-timeout tcp 4643 10
ip nat translation port-timeout tcp 4500 10
ip nat translation port-timeout udp 4501 10
ip nat translation max-entries 5000
ip nat service sip udp port 5061
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source list 101 interface Dialer0 overload
ip nat inside source static udp 192.168.0.109 5062 interface Dialer0 5062
ip nat inside source static udp 192.168.0.110 5061 interface Dialer0 5061
ip nat inside source static tcp 192.168.0.125 4647 interface Dialer0 4647
ip nat inside source static tcp 192.168.0.125 4646 interface Dialer0 4646
ip nat inside source static udp 192.168.0.125 4646 interface Dialer0 4646
ip nat inside source static udp 192.168.0.125 4645 interface Dialer0 4645
ip nat inside source static tcp 192.168.0.125 4645 interface Dialer0 4645
ip nat inside source static tcp 192.168.0.125 4644 interface Dialer0 4644
ip nat inside source static udp 192.168.0.125 4644 interface Dialer0 4644
ip nat inside source static udp 192.168.0.125 4643 interface Dialer0 4643
ip nat inside source static udp 192.168.0.125 4647 interface Dialer0 4647
ip nat inside source static tcp 192.168.0.125 4643 interface Dialer0 4643
ip nat inside source static tcp 192.168.0.179 4500 interface Dialer0 4500
ip nat inside source static udp 192.168.0.179 4501 interface Dialer0 4501
ip nat inside source static 192.168.0.2 interface Dialer0
ip nat inside source static tcp 192.168.0.179 5000 194.185.151.60 5000 extendabl
e
ip nat inside source static tcp 192.168.0.176 80 194.185.151.60 80 extendable
ip nat inside source static udp 192.168.0.110 5061 194.185.151.60 5061 extendabl
e
ip nat inside source static udp 192.168.0.109 5062 194.185.151.60 5062 extendabl
e
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
!
!
logging facility local3
logging 192.168.0.4
logging 192.168.0.100
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 101 permit ip 192.168.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
snmp-server community freenet RW
snmp-server community public RO
snmp-server community catchme RO
snmp-server user lupinfreefly freenet v1
snmp-server trap-source Ethernet0
snmp-server host 192.168.0.100 catchme
snmp-server host 192.168.1.253 catchme
!
line con 0
stopbits 1
line vty 0 4
password dgtlkattivo
login local
!
scheduler max-task-time 5000
end

DigitalRouter#

Quando tento di connettermi, ATM mi da questi log

DigitalRouter#show int atm 0
ATM0 is up, line protocol is up
Hardware is PQUICC_SAR (with Alcatel ADSL Module)
MTU 1500 bytes, sub MTU 1500, BW 800 Kbit, DLY 80 usec,
reliability 164/255, txload 1/255, rxload 1/255
Encapsulation ATM, loopback not set
Encapsulation(s): AAL5 AAL2, PVC mode
10 maximum active VCs, 1024 VCs per VP, 1 current VCCs
VC idle disconnect time: 300 seconds
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/224/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: None
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
127 packets input, 3170 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
89 packets output, 992 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 output buffer failures, 0 output buffers swapped out
DigitalRouter#




e il Dialer :


DigitalRouter#show int dialer 0
Dialer0 is up, line protocol is up (spoofing)
Hardware is Unknown
Description: Router ADSL
Internet address is 82.50.114.112/32
MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
DTR is pulsed for 1 seconds on reset
Interface is bound to Vi1
Last input never, output never, output hang never
Last clearing of "show interface" counters 00:05:52
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 42 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
97 packets input, 2533 bytes
62 packets output, 784 bytes
Bound to:
Virtual-Access1 is up, line protocol is up
Hardware is Virtual Access interface
MTU 1500 bytes, BW 56 Kbit, DLY 100000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
DTR is pulsed for 5 seconds on reset
Interface is bound to Di0 (Encapsulation PPP)
LCP Open
Listen: BRIDGECP, CDPCP
Open: IPCP
Bound to ATM0 VCD: 1, VPI: 8, VCI: 35
Cloned from Dialer0
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters 00:05:52
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 1/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
121 packets input, 2990 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
85 packets output, 1122 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DigitalRouter#




C'e qualcuno che sa aiutarmi ? da li sembrerebbe che sia connesso.. ma in realta no.. perchè anche facendo un ping dal cisco, non riesco a pingare niente che non sia nella mia Lan...

[BTS]

chiedi con "cisketto", mandagli un messaggio pvt
il nick dice tutto

[cisketto]

non hai specificato una access-list per gli host abilitati al NAT

ip nat inside source list 1 interface Dialer0 overload

fa riferimento ad una access-list 1 che non è definita!

scrivi:

access-list 1 permit 192.168.0.0 0.0.0.255

e funzionera!

[kattivo]

Ho un problema piu grosso adesso..
Per sbaglio ho cancellato il file di configurazione .. ho lanciato un erase startup-config..
e il router non è piu raggiungibile ne tramite console ne tramite telnet.
Ho fatto un pasticcio grosso ? si puo' rimediare ? o devo buttare via il router?


Leggendo bene il file di conf ho notato che c'e l'acces list..

[cisketto]

se vuoi la possiam rifare. contattami in msn