Squid

[texerasmo]

Ho installato squid

per il file di configurazione non ho fatto grosse modifche.
Ora volevo fare un test

squid è installato sulla mia macchina

Ora ho aperto firefox e nei parametri di connessione gli ho detto di utilizzare il seguente proxy
http://localhost porta 3128

però non vado in rete.
C'è qualche valore che devo controllare?
oppure faccio un test sbagliato?

grazie

[Devil!]

su Proxy Http devi mettere l'indirizzo o l'alias del pc quindi se squid gira sul tuo pc devi mettere

127.0.0.1 oppure localhost

non http://localhost

almeno credo

[scorpion89]

Si, configuri firefox(o il browser che usi) e gli dici di usare come proxy il computer con sopra squid.
Se la configurazione è sbagliata e nn ti permette di accedere a internet nn ti resta ke modificare il file di configurazione.

Ciao

[texerasmo]

io non riesco a frlo partire

l'ho installato facendo ./configure make make install
ma quando vado a fare

/sbin/squid non mi parte

non mi da errori

Uso anche webmin per la configurazione ma lui punta allo squid installato di default sulla macchina linux

[scorpion89]

Se nn ti da errori dovrebbe essere partito!!
Guarda con ps -e se risulta nei processi!
Cmq mi sembra ke di default squid permetta l'accesso soltanto al localhost

Ciao

[texerasmo]

io vedo se la porta è su ovvevo quella di default 3128

faccio un netstat -ano

non riesco a vederla.


per farlo partire basta /sbin/squid ?

[scorpion89]

/sbin/squid -k OPZIONE


Ciao

[texerasmo]

Una cosa con squid posso dire quali siti posso accedere e quali no?

Ok funziona...
mi mancava lo start
ma nell help non c'è





sage: squid [-dhvzCDFNRVYX] [-s | -l facility] [-f config-file] [-[au] port] [-k signal]
-a port Specify HTTP port number (default: 3128).
-d level Write debugging to stderr also.
-f file Use given config-file instead of
/usr/local/squid/etc/squid.conf
-h Print help message.
-k reconfigure|rotate|shutdown|interrupt|kill|debug|check|parse
Parse configuration file, then send signal to
running copy (except -k parse) and exit.
-s | -l facility
Enable logging to syslog.
-u port Specify ICP port number (default: 3130), disable with 0.
-v Print version.
-z Create swap directories
-C Do not catch fatal signals.
-D Disable initial DNS tests.
-F Don't serve any requests until store is rebuilt.
-N No daemon mode.
-R Do not set REUSEADDR on port.
-S Double-check swap during rebuild.
-V Virtual host httpd-accelerator.
-X Force full debugging.
-Y Only return UDP_HIT or UDP_MISS_NOFETCH during fast reload.

[scorpion89]

Si, tramite le acl.
Puoi anche far visualizzare un certo messaggio di errore alle persone ke cercano di andare su internet da una cera ora in poi!(il primo esempio ke mi è venuto in mente...)

Ciao

[texerasmo]

http_port 3128
icp_port 3130
cache_mem 8 MB
cache_dir ufs /usr/local/squid/var/cache 100 16 256
cache_access_log /usr/local/squid/var/logs/access.log
cache_log /usr/local/squid/var/logs/cache.log
cache_store_log /usr/local/squid/var/logs/store.log
emulate_httpd_log off
mime_table /usr/local/squid/etc/mime.conf
pid_filename /usr/local/squid/var/run/squid.pid
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl vietato dstdomain www.libero.it
acl SSL_ports port 443 563
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl locallan src 192.168.2.11
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost
http_access allow locallan
http_access deny all vietato
cache_effective_user nobody
cache_effective_group nobody

vorei non andare su libero ma invece ci va

[texerasmo]

http_port 3128
icp_port 3130
cache_mem 8 MB
cache_dir ufs /usr/local/squid/var/cache 100 16 256
cache_access_log /usr/local/squid/var/logs/access.log
cache_log /usr/local/squid/var/logs/cache.log
cache_store_log /usr/local/squid/var/logs/store.log
emulate_httpd_log off
mime_table /usr/local/squid/etc/mime.conf
pid_filename /usr/local/squid/var/run/squid.pid
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl vietato dstdomain www.libero.it
acl SSL_ports port 443 563
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl locallan src 192.168.2.11
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost
http_access allow locallan
http_access deny all vietato
cache_effective_user nobody
cache_effective_group nobody

vorei non andare su libero ma invece ci va

[texerasmo]

http_port 3128
icp_port 3130
cache_mem 8 MB
cache_dir ufs /usr/local/squid/var/cache 100 16 256
cache_access_log /usr/local/squid/var/logs/access.log
cache_log /usr/local/squid/var/logs/cache.log
cache_store_log /usr/local/squid/var/logs/store.log
emulate_httpd_log off
mime_table /usr/local/squid/etc/mime.conf
pid_filename /usr/local/squid/var/run/squid.pid
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl vietato dstdomain www.libero.it
acl SSL_ports port 443 563
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl locallan src 192.168.2.11
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost
http_access allow locallan
http_access deny all vietato
cache_effective_user nobody
cache_effective_group nobody

vorei non andare su libero ma invece ci va

[texerasmo]

http_port 3128
icp_port 3130
cache_mem 8 MB
cache_dir ufs /usr/local/squid/var/cache 100 16 256
cache_access_log /usr/local/squid/var/logs/access.log
cache_log /usr/local/squid/var/logs/cache.log
cache_store_log /usr/local/squid/var/logs/store.log
emulate_httpd_log off
mime_table /usr/local/squid/etc/mime.conf
pid_filename /usr/local/squid/var/run/squid.pid
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl vietato dstdomain www.libero.it
acl SSL_ports port 443 563
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl locallan src 192.168.2.11
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost
http_access allow locallan
http_access deny all vietato
cache_effective_user nobody
cache_effective_group nobody

vorei non andare su libero ma invece ci va

[texerasmo]

http_port 3128
icp_port 3130
cache_mem 8 MB
cache_dir ufs /usr/local/squid/var/cache 100 16 256
cache_access_log /usr/local/squid/var/logs/access.log
cache_log /usr/local/squid/var/logs/cache.log
cache_store_log /usr/local/squid/var/logs/store.log
emulate_httpd_log off
mime_table /usr/local/squid/etc/mime.conf
pid_filename /usr/local/squid/var/run/squid.pid
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl vietato dstdomain www.libero.it
acl SSL_ports port 443 563
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl locallan src 192.168.2.11
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost
http_access allow locallan
http_access deny all vietato
cache_effective_user nobody
cache_effective_group nobody

vorei non andare su libero ma invece ci va

[WebWolf]

http://www.merlinobbs.net/Squid-Book/HTML/