hd per dfi quale?

[fpaolelli]

Ciao ragazzi ma su questa scheda quale hd devo mettere un sata o un sata2 sulle descrizione dice sata up to 3gb/s ma questo non è il valore del sata2?La scheda è la DFI NF4 ULTRA INFINITY amd 939 di seguito la descrizione completa:

AMD Socket 939, Athlon 64FX/Athlon 64/Sempron, 2000MT/s, 1 PCI Express x16, 2 PCI Express x1, DDR400, 6-channel audio, S/PDIF-in/out, 4 Serial ATA up to 3Gb/s, NVIDIA RAID 0/1, Gigabit LAN, 2 IEEE 1394 and 10 USB 2.0.

Specifiche tecniche
CPU


# AMD Athlon 64 FX / Athlon 64 / Sempron
# Socket 939

Chipset


# NVIDIA nForce4 Ultra

Front Side Bus


# 2000MT/s HyperTransport interface

Memory


# Four 184-pin DDR SDRAM DIMM sockets
# Supports dual channel (128-bit wide) memory interface
# Supports up to 4GB system memory
# Supports PC2100 (DDR266), PC2700 (DDR333) and PC3200 (DDR400) DDR SDRAM DIMM

BIOS


# Award BIOS
# 4Mbit flash memory

Power Management


# Supports ACPI STR (Suspend to RAM) function
# Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
- Wake-On-LAN
- Wake-On-Ring
- RTC timer to power-on the system
# AC power failure recoveryAC power failure recovery

Hardware Monitor


# Monitors CPU/system temperature
# Monitors VCC3/12V/3.3V/5VSB/Vbat voltages
# Monitors the speed of the cooling fans
# CPU Overheat Protection function monitors CPU temperature during system boot-up

Audio


# 6-channel audio CODEC
# S/PDIF-in/out interface

LAN


# Vitesse VSC8201 Gigabit Phy
# Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and
802.3ab (1000BASE-T) standards

IDE


# Supports two IDE connectors that allows connecting up to four UltraDMA 133Mbps hard drives
# NVIDIA RAID allows RAID arrays spanning across Serial ATA and Parallel ATA
# RAID 0 and RAID 1

Serial ATA with RAID


# Supports four Serial ATA ports
# SATA speed up to 3Gb/s
# NVIDIA RAID allows RAID arrays spanning across Serial ATA and Parallel ATA
# RAID 0 and RAID 1

IEEE 1394


# VIA VT6307
# Supports two 100/200/400 Mb/sec ports

Rear Panel I/O Ports


# 1 mini-DIN-6 PS/2 mouse port
# 1 mini-DIN-6 PS/2 keyboard port
# 2 S/PDIF RCA jacks (S/PDIF-out and S/PDIF-in)
# 1 parallel port
# 1 serial port
# 1 IEEE 1394 port
# 1 RJ45 LAN port
# 4 USB 2.0/1.1 ports
# Line-in, line-out and mic-in jacks

I/O Connectors


# 3 connectors for 6 additional external USB 2.0/1.1 ports
# 1 connector for 1 external IEEE 1394 port
# 1 front audio connector for external line-out and mic-in jacks
# 1 CD-in internal audio connector
# 1 S/PDIF connector for optical cable connection
# 1 IrDA connector
# 4 Serial ATA connectors
# 2 IDE connectors
# 1 floppy connector
# 1 24-pin ATX power connector
# 1 4-pin ATX 12V power connector
# 1 front panel connector
# 3 fan connectors

Expansion Slots


# 1 PCI Express x16 slot
# 2 PCI Express x1 slots
# 3 PCI slots

PCB


# ATX form factor
# 22cm (8.66") x 30.5cm (12")

All specifications above are subject to change without prior notice.

[sacd]

Puoi metterci quello che vuoi sata 1 o 2 basta che nn ci metti un sata 2 maxtor perchè altrimenti gli devi aggiornare il firmware