Masterizzatore Nec che fa le bizze....

[Sampei1980]

Ciao a tutti. Scrivo per chiederVi un'informazione: Possiedo ormai da alcuni anni un masterizzatore Nec "ND-1300A". ricordo che quando lo acquistai era uno dei primi a fare Dvd+R/-R. Nel corso del tempo ci ho masterizzato tantissimo su ogni tipo di supporto: Dai più scarsi come i Budget e i Princo ai più validi quali Verbatim, Tdk, Philips ecc...
Ultimamente avevo avuto problemi su alcuni supporti e aggiornai il firmware all'ultima versione che tra l'altro è vecchiotta pure lei e i problemi si risolsero. Pochi giorni fa però ho acquistato tramite un amico che fa grossi ordini all'estero (per spendere meno) dei Tdk. Ne ho presi una decina da provare e purtroppo non funzionano. Sul mio Dvd recorder funzionano alla grande ma sul masterizzatore non c'è nulla da fare. Firmware piu aggiornati non ce ne sono e anche andando indietro la situazione non cambia. Tali Tdk sono diversi dai Tdk che solitamente utilizzo e che acquisto in un centro commerciale. Sono sulla parte superiore di un Blu elettrico con delle linee argentate disegnate sopra. Quelli che utilizzavo invece sono di un colore sempre blu ma meno intenso..più sul celeste.

Ripeto che sul mio dvd recorder funzionano alla perfezione.
Una volta masterizzati dal dvd recorder il masterizzatore me li legge tranquillamente. Il problema è solo masterizzarci sopra.

Vi posso anche copiare e incollare ciò che Nero mi dice nel log di errore.

A questo punto vi chiedo: E' un problema di incompatibilità del masterizzatore oppure altro? Ora i masterizzatori non costano molto e siccome il mio è vecchiotto potrei anche cambiarlo...ma non vorrei che il problema non sia quello.

Grazie per eventuali consigli.

Ciao.




1C82-0010-8011-0000-3417-9776-6733

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 25/09/2005 19.11.20

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.09 - HA 1 TA 4 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <YD5441M CJE880D >Version: 1.0 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6B200S0 BANC viasraid Port 2 ID 0 DMA: Off
CdRomPeripheral : YD5441M CJE880D 1.0 dtscsi Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom4
HL-DT-ST CD-RW GCE-8400B F: CDRom1
YD5441M CJE880D G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048040kB)
Free physical memory: 704MB (720992kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.5.2006
Compilation ISO
14.24.11 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14.24.11 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

14.24.11 #3 Text 0 File Reader.cpp, Line 124
Reader running

14.24.11 #4 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

14.24.11 #5 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

14.24.11 #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 185375 ( 41:11.50, 362MB)

14.24.11 #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

14.24.11 #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193

14.24.11 #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14.24.11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 185376 (185376) = #185376/41:11.51
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 185376 blocks [E: _NEC DVD_RW ND-1300A]
--------------------------------------------------------------

14.24.11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 379650048, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
185376 | lead-out | 1 | 0x41 | 0x00

14.24.11 #12 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

14.24.11 #13 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

14.24.11 #14 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

14.24.11 #15 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

14.24.11 #16 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2x (2.770 KB/s)

14.24.11 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14.24.11 #18 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode

14.24.11 #19 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

14.24.11 #20 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

14.24.11 #21 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14.24.11 #22 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 02 D4 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

14.24.11 #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1783
Illegal disc
E: _NEC DVD_RW ND-1300A

14.24.11 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
Could not perform start of Disc-at-once

14.24.11 #25 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2x (2.770 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 04/05/2006 19.17.34 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 22.59.42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)