Problemi con Pioneer DVR-109

[alpha2]

Ho un masterizzatore Pioneer DVR-109.
Per i primi mesi ha funzionato perfettamente, solo in due occasioni si
è verificato il problema che più avanti si verificherà sempre.
Cioè quando incomincia la masterizzazione (Con Nero, sia 6.6 che 7.x)
la fase di "lead-in" dura molti secondi, e qualche volta la masterizzazione
prosegue dopo la fase di lead-in e si conclude normalmente senza problemi,
qualche altra volta si interrompe e vengono indicati diversi tipi di
errore:


errore di scrittura
19.50.21 #122 CDR -1135 File Writer.cpp, Line 302
Write error
L: PIONEER DVD-RW DVR-109



errore di posizionamento,
12.23.55 #126 CDR -1104 File WriterStatus.cpp, Line 167
Positioning error
L: PIONEER DVD-RW DVR-109

Illegal disc
20.09.26 #24 CDR -1046 File Writer.cpp, Line 302
Illegal disc
L: PIONEER DVD-RW DVR-109

Dispositivo non disponibile
14.02.48 #26 CDR -600 File Writer.cpp, Line 302
Device not available
L: PIONEER DVD-RW DVR-109

Impossibilità di scrivere la traccia
23.02.56 #20 TRANSFER -30 File ThreadedTransferInterface.cpp, Line 2664
Cannot write track at correct position with this recorder

Power calibration Error
19.36.07 #26 CDR -1106 File Writer.cpp, Line 302
Power calibration error
L: PIONEER DVD-RW DVR-109

A volte è capitato che la fase di lead-in è durata 2 minuti dopo di che è
iniziata la scrittura sul dvd che si è conclusa normalmente (la verifica dati è
andata bene).
Fino a che la fase di lead-in non si è conclusa il buffer del masterizzatore è
completamente vuoto. Non appena finisce la fase di lead-in il buffer del
masterizzatore si riempie e parte la masterizzazione.
Invece il buffer che Nero costituisce nella memoria di sistema è sempre pieno.
Ho fatto svariate prove, e ho notato che
-Masterizzando un cd in modalità track-at-once il buffer del masterizzatore
si riempie subito, dopo circa due secondi, e la fase di lead-in è eseguita alla
fine della masterizzazione insieme alla fase di lead-out.
-Masterizzando un cd in modalità disc-at-once la fase di lead-in è eseguita prima
della scrittura e dura svariati secondi (a 24x dura circa 20 secondi), dopo di che
si riempie il buffer del masterizzatore e comincia la scrittura.
-Masterizzando un dvd (in modalità DAO) la fase di lead-in dura svariati secondi
doop di che in alcuni casi la scrittura fallisce, in altri casi la masterizzazione
si conclude normalmente. Se poi si scrive su un dvd in multisessione, nella
prima sessione la fase di lead-in ha una durata eccessiva, ma nelle sessioni
successive la fase di lead-in dura 2-3 secondi dopo di che il buffer del
masterizzatore si riempie fino all'8% ma la scrittura non procede, dopo
qualche secondo il buffer si riempie completamente e la scrittura comincia.
Questo comportamento si verifica indipendentemente dalla velocità di masterizzazione.
Solo che se si masterizza un dvd a 4x dopo la fase di lead-in parte
certamente la masterizzazione, mentre a velocità superiori può capitare che
dopo la fase di lead-in la scrittura fallisca.
Ma se "supera la fase di lead-in" riesco a masterizzare anche a 16x.
Nei primi mesi di vita invece la fase di lead-in durava solo 2-3 secondi.
Come DVD uso solo Verbatim +R e -R.
Ma ultimamente non mi fa fare nemmeno la simulazione con i dvd verbatim.
Mi dice che "la simulazione non è possibile per questo tipo di disco".
Fino a qualche tempo fa invece me la faceva fare. Riesco invece a fare la
simulazione con i cd.
Oltre a Nero Premium 7.0 ho installato Daemon Tools 3.47, Alcohol, Power DVD,
e Pinnacle Media Center.
Ho provato a disabilitare l'autorun, ma non ha prodotto risultati.
Il masterizzatore si trova sul Primary IDE Channel insieme al lettore DVD,
il lettore DVD è configurato come master e il masterizzatore come slave.
Sul Secondary IDE Channel c'è l'hard disk.
Il computer è nuovo, Pentium 4 3.2ghz, 1 gb di ram, hd 300 gb.
Il firmware del pioneer dvr-109 è la versione 1.40.
Se aggiorno il firmware perdo la garanzia?
Ho l'impressione che sia un problema software, ma a questo punto non ho idea
di cosa possa essere.
Allego uno dei file di Log e vi ringrazio anticipatamente per la collaborazione.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Programmi\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12.54.32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.40 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 6L300S0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163B CDRom0
PIONEER DVD-RW DVR-109 CDRom1
Generic DVD-ROM M: CDRom2
SCSIVAX DVD/CD-ROM N: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047788kB)
Free physical memory: 398MB (408508kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.3.2006
Compilation ISO
16.22.28 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

16.22.28 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

16.22.28 #3 Text 0 File Reader.cpp, Line 124
Reader running

16.22.28 #4 Text 0 File Writer.cpp, Line 113
Writer L: PIONEER DVD-RW DVR-109 running

16.22.28 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

16.22.28 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

16.22.28 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2242287 (498:17.12, 4379MB)

16.22.28 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

16.22.28 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

16.22.28 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16.22.28 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2242288 (2242288) = #2242288/498:17.13
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2242288 blocks [L: PIONEER DVD-RW DVR-109]
--------------------------------------------------------------

16.22.28 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [L: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4592205824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2242288 | lead-out | 1 | 0x41 | 0x00

16.22.28 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

16.22.28 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

16.22.28 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

16.22.28 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

16.22.28 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 6x (8.310 KB/s)

16.22.29 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16.22.29 #19 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.’_......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

16.22.29 #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

16.22.30 #21 Text 0 File Cdrdrv.cpp, Line 1195
16:22:30.531 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.02 #22 Text 0 File Cdrdrv.cpp, Line 1195
16:23:02.656 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.02 #23 Text 0 File Cdrdrv.cpp, Line 1195
16:23:02.703 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.02 #24 Text 0 File Cdrdrv.cpp, Line 1195
16:23:02.968 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.03 #25 Text 0 File Cdrdrv.cpp, Line 1195
16:23:03.265 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.03 #26 Text 0 File Cdrdrv.cpp, Line 1195
16:23:03.406 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.03 #27 Text 0 File Cdrdrv.cpp, Line 1195
16:23:03.421 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.04 #28 Text 0 File Cdrdrv.cpp, Line 1195
16:23:04.703 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.04 #29 Text 0 File Cdrdrv.cpp, Line 1195
16:23:04.734 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.04 #30 Text 0 File Cdrdrv.cpp, Line 1195
16:23:04.750 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.04 #31 Text 0 File Cdrdrv.cpp, Line 1195
16:23:04.765 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.04 #32 Text 0 File Cdrdrv.cpp, Line 1195
16:23:04.781 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.04 #33 Text 0 File Cdrdrv.cpp, Line 1195
16:23:04.812 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.04 #34 Text 0 File Cdrdrv.cpp, Line 1195
16:23:04.812 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.04 #35 Text 0 File Cdrdrv.cpp, Line 1195
16:23:04.828 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.04 #36 Text 0 File Cdrdrv.cpp, Line 1195
16:23:04.843 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.04 #37 Text 0 File Cdrdrv.cpp, Line 1195
16:23:04.859 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.05 #38 Text 0 File Cdrdrv.cpp, Line 1195
16:23:05.187 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.05 #39 Text 0 File Cdrdrv.cpp, Line 1195
16:23:05.203 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.05 #40 Text 0 File Cdrdrv.cpp, Line 1195
16:23:05.218 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.05 #41 Text 0 File Cdrdrv.cpp, Line 1195
16:23:05.359 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.05 #42 Text 0 File Cdrdrv.cpp, Line 1195
16:23:05.390 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.05 #43 Text 0 File Cdrdrv.cpp, Line 1195
16:23:05.421 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.06 #44 Text 0 File Cdrdrv.cpp, Line 1195
16:23:06.687 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.07 #45 Text 0 File Cdrdrv.cpp, Line 1195
16:23:07.656 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.07 #46 Text 0 File Cdrdrv.cpp, Line 1195
16:23:07.812 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.07 #47 Text 0 File Cdrdrv.cpp, Line 1195
16:23:07.890 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.11 #48 Text 0 File Cdrdrv.cpp, Line 1195
16:23:11.093 - L: PIONEER DVD-RW DVR-109 : Queue again later

16.23.12 #49 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 97 60 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 94 80 0E 00 00 00 00 0C
Buffer x0a0a0000: Len x10000
0xD8 54 71 AB 26 61 05 3C A6 FE C8 3A 11 56 86 C1
0x53 07 0A 05 C5 82 80 18 77 35 56 F5 A0 33 57 06
0x39 42 18 06 7B D0 14 20 D9 A3 B9 2A B5 7D 2E 54

16.23.12 #50 CDR -1135 File Writer.cpp, Line 302
Write error
L: PIONEER DVD-RW DVR-109

16.23.12 #51 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

16.23.12 #52 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

16.27.11 #53 SPTI -600 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00

16.27.48 #54 SPTI -600 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00

16.27.48 #55 SPTI -500 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x00) WinError(22) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00

16.27.48 #56 CDR -600 File WriterStatus.cpp, Line 167
Device not available
L: PIONEER DVD-RW DVR-109

16.27.48 #57 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

16.27.48 #58 SPTI -500 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x00) WinError(22) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x038fd800: Len x48

16.27.49 #59 SPTI -500 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x00) WinError(5) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x038fd800: Len x48

16.27.49 #60 CDR -500 File WriterStatus.cpp, Line 172
SCSI command aborted
L: PIONEER DVD-RW DVR-109

16.27.49 #61 TRANSFER -39 File WriterStatus.cpp, Line 172
Could not perform EndSession

16.27.50 #62 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 6x (8.310 KB/s)

16.27.50 #63 SPTI -500 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x00) WinError(5) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)