[Ubuntu] Connessione internet

[chouse]

Ho installato di recente Ubuntu Breezy anche sul pc di casa,
come faccio a creare diverse connessioni ai diversi provider che uso?

Grazie

PS. Il modem pci isdn della trust è riconosciuto nella conf. hardware

[Nemios]

Ma non c'è la pratica utility nel menu in alto? Preferenze o amministrazione, non ricordo. La stessa utility che ti permette di configurare la rete, perchè in generale configura le connessioni

[chouse]

Originariamente inviato da Nemios

Ma non c'è la pratica utility nel menu in alto? Preferenze o amministrazione, non ricordo. La stessa utility che ti permette di configurare la rete, perchè in generale configura le connessioni

Si, esatto: Amministrazione -> Rete -> Connessioni -> connessione via modem

Il problema sorge qui: quando vado a impostare le "Proprietà"
della connessione, nella menù a scorrimento
"La porta del modem" si fa riferimento a dei file dev/.....
in particolare ne è elencato uno dev/modem che neanche esite

inoltre non riconosce automaticamente il modem

[Nemios]

Il modem pci isdn della trust è riconosciuto nella conf. hardware

Vai a vedere a che /dev corrisponde.
Nel caso di modem esterni attaccati alla seriale, ad esempio, dovrebbe essere qualcosa tipo /dev/tt0
/dev/modem dovrebbe essere solo un link, ma forse è linkato alla cosa sbagliata

[chouse]

Originariamente inviato da Nemios

Vai a vedere a che /dev corrisponde.

Come?

Ah, cmq grazie per l'aiuto

[Nemios]

In Amministrazione --> Sistema (o hardware? o chissache? non mi ricordo il nome ma la voce c'è)
Tu da dove hai visto che te l'ha riconosciuto? Non è da li?

[Al Azif]

Originariamente inviato da chouse

Come?

Ah, cmq grazie per l'aiuto

Da shell:

lspci

Vedi se effettivametne te lo rileva, poi:

dmesg

E vedi su che device te lo monta.

[chouse]

Originariamente inviato da Al Azif

Da shell:

lspci

Vedi se effettivametne te lo rileva, poi:

0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bri dge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Br idge)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
0000:00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller  (rev 07)
0000:00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller  (rev 07)
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound  Controller (rev a0)
0000:00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fa st Ethernet (rev 90)
0000:00:0f.0 Network controller: Cologne Chip Designs GmbH ISDN network controll er [HFC-PCI] (rev 02)
0000:00:13.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Contr oller (rev 50)
0000:00:13.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Contr oller (rev 50)
0000:00:13.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP

Originariamente inviato da Al Azif

Da shell:
dmesg

E vedi su che device te lo monta.

mory: 511236k/524224k available (1415k kernel code, 12396k reserved, 763k data, 224k init, 0k highmem)
[4294670.994000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.994000] Calibrating delay loop... 3964.92 BogoMIPS (lpj=1982464)
[4294671.016000] Security Framework v1.0.0 initialized
[4294671.016000] SELinux:  Disabled at boot.
[4294671.016000] Mount-cache hash table entries: 512
[4294671.016000] CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[4294671.016000] CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[4294671.016000] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
[4294671.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294671.016000] CPU: L2 Cache: 256K (64 bytes/line)
[4294671.016000] CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000
[4294671.016000] CPU: AMD Athlon(tm) XP 2400+ stepping 01
[4294671.016000] Enabling fast FPU save and restore... done.
[4294671.016000] Enabling unmasked SIMD FPU exception support... done.
[4294671.016000] Checking 'hlt' instruction... OK.
[4294671.020000] Checking for popad bug... OK.
[4294671.020000] checking if image is initramfs... it is
[4294671.387000] Freeing initrd memory: 4821k freed
[4294671.389000] ACPI: Looking for DSDT in initrd... not found!
[4294671.436000]  not found!
[4294671.442000] ACPI: setting ELCR to 0200 (from 0c20)
[4294671.445000] NET: Registered protocol family 16
[4294671.445000] EISA bus registered
[4294671.445000] ACPI: bus type pci registered
[4294671.446000] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
[4294671.446000] PCI: Using configuration type 1
[4294671.446000] mtrr: v2.0 (20020519)
[4294671.447000] ACPI: Subsystem revision 20050729
[4294671.453000] ACPI: Interpreter enabled
[4294671.453000] ACPI: Using PIC for interrupt routing
[4294671.453000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.453000] PCI: Probing PCI hardware (bus 00)
[4294671.453000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294671.456000] Uncovering SIS18 that hid as a SIS503 (compatible=1)
[4294671.456000] Enabling SiS 96x SMBus.
[4294671.456000] Boot video device is 0000:01:00.0
[4294671.457000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.461000] ACPI: Power Resource [URP1] (off)
[4294671.461000] ACPI: Power Resource [URP2] (off)
[4294671.461000] ACPI: Power Resource [FDDP] (off)
[4294671.461000] ACPI: Power Resource [LPTP] (off)
[4294671.461000] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[4294671.462000] ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
[4294671.462000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 12 14 15)
[4294671.462000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 12 14 15)
[4294671.462000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
[4294671.462000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
[4294671.463000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *10 12 14 15)
[4294671.463000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 12 14 15)
[4294671.463000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.463000] pnp: PnP ACPI init
[4294671.466000] pnp: PnP ACPI: found 10 devices
[4294671.466000] PnPBIOS: Disabled by ACPI PNP
[4294671.466000] PCI: Using ACPI for IRQ routing
[4294671.466000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294671.475000] audit: initializing netlink socket (disabled)
[4294671.475000] audit: initialized
[4294671.475000] VFS: Disk quotas dquot_6.5.1
[4294671.475000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.475000] devfs: 2004-01-31 Richard Gooch ([email protected])
[4294671.475000] devfs: boot_options: 0x0
[4294671.475000] Initializing Cryptographic API
[4294671.475000] isapnp: Scanning for PnP cards...
[4294671.830000] isapnp: No Plug & Play device found
[4294671.846000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[4294671.846000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.846000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.846000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294671.846000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.846000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.848000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.848000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.848000] io scheduler noop registered
[4294671.848000] io scheduler anticipatory registered
[4294671.848000] io scheduler deadline registered
[4294671.848000] io scheduler cfq registered
[4294671.849000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.849000] EISA: Probing bus 0 at eisa.0
[4294671.849000] EISA: Detected 0 cards.
[4294671.849000] NET: Registered protocol family 2
[4294671.858000] IP: routing cache hash table of 4096 buckets, 32Kbytes
[4294671.858000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[4294671.858000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[4294671.859000] TCP: Hash tables configured (established 32768 bind 32768)
[4294671.859000] NET: Registered protocol family 8
[4294671.859000] NET: Registered protocol family 20
[4294671.859000] ACPI wakeup devices:
[4294671.859000] PCI0 PS2M PS2K UAR1 UAR2 USB1 USB2  LAN  MDM  AUD SLPB
[4294671.859000] ACPI: (supports S0 S1 S4 S5)
[4294671.859000] Freeing unused kernel memory: 224k freed
[4294671.873000] vga16fb: initializing
[4294671.873000] vga16fb: mapped to 0xc00a0000
[4294671.997000] Console: switching to colour frame buffer device 80x30
[4294671.997000] fb0: VGA16 VGA frame buffer device
[4294672.009000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294673.106000] Capability LSM initialized
[4294673.118000] NET: Registered protocol family 1
[4294673.130000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294673.130000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294673.130000] ACPI: bus type ide registered
[4294673.136000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[4294673.136000] SIS5513: chipset revision 208
[4294673.136000] SIS5513: not 100% native mode: will probe irqs later
[4294673.136000] SIS5513: SiS735 ATA 100 (2nd gen) controller
[4294673.136000]     ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
[4294673.136000]     ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
[4294673.136000] Probing IDE interface ide0...
[4294673.400000] hda: QUANTUM FIREBALLP LM15, ATA DISK drive
[4294673.655000] hdb: WDC WD84AA, ATA DISK drive
[4294673.707000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.707000] Probing IDE interface ide1...
[4294674.379000] hdc: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive
[4294674.991000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.991000] Probing IDE interface ide2...
[4294675.504000] Probing IDE interface ide3...
[4294676.016000] Probing IDE interface ide4...
[4294676.529000] Probing IDE interface ide5...
[4294677.044000] hda: max request size: 128KiB
[4294677.056000] hda: 29336832 sectors (15020 MB) w/1900KiB Cache, CHS=29104/16/63, UDMA(66)
[4294677.056000] hda: cache flushes not supported
[4294677.056000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 >
[4294677.075000] hdb: max request size: 128KiB
[4294677.094000] hdb: 16514064 sectors (8455 MB) w/2048KiB Cache, CHS=16383/16/63, UDMA(66)
[4294677.094000] hdb: cache flushes not supported
[4294677.094000]  /dev/ide/host0/bus0/target1/lun0: p1
[4294677.110000] hdc: ATAPI 52X CD-ROM drive, 128kB Cache
[4294677.110000] Uniform CD-ROM driver Revision: 3.20
[4294677.355000] Attempting manual resume
[4294677.356000] swsusp: Suspend partition has wrong signature?
[4294677.394000] usbcore: registered new driver usbfs
[4294677.394000] usbcore: registered new driver hub
[4294677.394000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294677.395000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[4294677.395000] PCI: setting IRQ 10 as level-triggered
[4294677.395000] ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[4294677.395000] ohci_hcd 0000:00:02.2: Silicon Integrated Systems [SiS] USB 1.0 Controller
[4294677.395000] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[4294677.395000] ohci_hcd 0000:00:02.2: irq 10, io mem 0xcfffe000
[4294677.448000] hub 1-0:1.0: USB hub found
[4294677.448000] hub 1-0:1.0: 3 ports detected
[4294677.451000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
[4294677.451000] PCI: setting IRQ 5 as level-triggered
[4294677.451000] ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
[4294677.451000] ohci_hcd 0000:00:02.3: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
[4294677.451000] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[4294677.451000] ohci_hcd 0000:00:02.3: irq 5, io mem 0xcffff000
[4294677.504000] hub 2-0:1.0: USB hub found
[4294677.504000] hub 2-0:1.0: 3 ports detected
[4294677.537000] sis900.c: v1.08.08 Jan. 22 2005
[4294677.537000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[4294677.537000] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
[4294677.538000] 0000:00:03.0: Realtek RTL8201 PHY transceiver found at address 1.
[4294677.546000] 0000:00:03.0: Using transceiver found at address 1 as default
[4294677.547000] eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 10, 00:0a:e6:af:06:81.
[4294677.562000] USB Universal Host Controller Interface driver v2.2
[4294677.562000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294677.562000] PCI: setting IRQ 11 as level-triggered
[4294677.562000] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294677.562000] uhci_hcd 0000:00:13.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[4294677.624000] uhci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
[4294677.624000] uhci_hcd 0000:00:13.0: irq 11, io base 0x0000c800
[4294677.624000] hub 3-0:1.0: USB hub found
[4294677.624000] hub 3-0:1.0: 2 ports detected
[4294677.627000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[4294677.627000] ACPI: PCI Interrupt 0000:00:13.1[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[4294677.627000] uhci_hcd 0000:00:13.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
[4294677.689000] uhci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
[4294677.689000] uhci_hcd 0000:00:13.1: irq 11, io base 0x0000cc00
[4294677.689000] hub 4-0:1.0: USB hub found
[4294677.689000] hub 4-0:1.0: 2 ports detected
[4294677.707000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[4294677.707000] ACPI: PCI Interrupt 0000:00:13.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294677.707000] ehci_hcd 0000:00:13.2: VIA Technologies, Inc. USB 2.0
[4294677.707000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 5
[4294677.707000] ehci_hcd 0000:00:13.2: irq 10, io mem 0xcfffde00
[4294677.707000] ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
[4294677.708000] hub 5-0:1.0: USB hub found
[4294677.708000] hub 5-0:1.0: 4 ports detected
[4294680.103000] ACPI: CPU0 (power states: C1[C1])
[4294680.269000] Attempting manual resume
[4294680.269000] swsusp: Suspend partition has wrong signature?
[4294680.291000] kjournald starting.  Commit interval 5 seconds
[4294680.291000] EXT3-fs: mounted filesystem with ordered data mode.
[4294681.273000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294684.452000] Adding 281096k swap on /dev/hda5.  Priority:-1 extents:1
[4294684.683000] EXT3 FS on hda2, internal journal
[4294692.385000] parport: PnPBIOS parport detected.
[4294692.385000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[4294692.474000] lp0: using parport0 (interrupt-driven).

questo me lo dovresti tradurre
grazie

[chouse]

Up!
please!

[chouse]

Problema risolto con mandriva 2006 che con il mandrivacontrolcentre
mi ha permesso di scegliere il giusto driver