Radeon Omega Drivers 3.8.205 (Cat 6.1)

REPERGOGIAN · 19-01-2006, 07:18

RICORDO CHE GLI OMEGA NON HANNO IL FAMIGERATO CCC catalys control center MA IL VECCHIO E SANO PANNELLO

(01/18/06)

The new Omega Drivers based on the Catalyst 6.1 are ready!

Well, in case you didn't noticed by now, I decided to skip the Catalyst 5.13 drivers and went directly to the 6.1, Why? well, there where no major changes from 5.13 to 6.1, so I waited for the official version to be released and use that instead (I had the beta for a while).

Please go to the ATI Radeon section and take a look at the Readme while downloading so you know the latest changes, additions to this set and some important notes or warnings.

Enjoy!

readme

What's New in Omega Drivers?
v3.8.205
[*] Based on the Catalyst 6.1 Official drivers.
[+] Starting from this set, I will use my own version internally for the Catalyst drivers, instead of using 6.1, 6.2, etc, I will be naming them 6.01, 6.02, etc, this will make the Cat versions less confusing and more "logical".[*] Updated Multires to v1.56. (fixes the "non-supported" resolutions bug)
[+] New version naming scheme for the Omega Drivers, now is based on the internal ATI version number than in the 2D Display version.

[b]What's new for ATI Tray Tools?
1.0.5.815
[F] Fixed bug when ATT produce BSOD at start up on some motherboards like Asus P5WD2[*] Improved current 3D settings detection on new Catalyst installation
[F] Fixed bug with wrong detection of current level of Adaptive AA.
[+] "Save Icon Position" module now will save positions for each resolution you will use. Saved positions are incompatible between different resolutions.
[+] Added new module in monitoring graphs. "Motherboard Resources". Now you can directly monitor temperatures, voltages on your motherboard! Big thanks to OverSoft team for SIO Engine plugin. Full supported sensors Winbond: W83627HF, W83637HF, W83627THF, W83782D, W83781D, W83697HF, W83627EHF ITE: IT8705F, IT8712F. Abit uGuru. Partially supported Winbond W83647HF, Asus AS99127F, Fintek F71872. This module in beta test stage.
[+] Added support for custom FPS color in game profiles. Only for OpenGL/Direct3D8/Direct3D9 Games and applications. For old Direct3D and DirectX games (Direct3D7/6/5) custom FPS color will be used only if game will use 32 bits color format in rendering procedure.[*] Updated Core names database. Included information about R580, R600, RV370X, RV371, RV530 LE/SE/VE chips.
[+] Added information about X1900 boards[*] Now Overclocking and Monitoring disabled by default for R5xx boards. Until I find more information about overclocking new ATI chips.[*] Now ATT will not update Monitoring Tray Icons if registered games is active.[*] Moved all overclocking procedures into Kernel mode driver.[*] Updated I2C procedures.[*] Updated OSD plugin "Motherboard resources". Added support for internal ATT Motherboard monitor sources.[*] Updated plugins API. Included functions to access internal Motherboard monitor information. Some function has been updated for OSD Plugins. Please refer to readme.txt in plugins folder. All third party runtime and OSD plugins with configuration procedures must be updated.[*] I2C Dump procedure now can be directly accessed in System Information module.
[F] Fixed wrong CRT + TV detection in System Information module.
[+] Updated texture LOD adjustment procedure. Now you can select positive value, which can increase performance, but in result of very bad quality.
[+] Added support for HDTV modes in Display module.[*] Improved TV/Display module support under Windows XP 64
[F] Fixed situation when ATT unable to properly detect supported display types
[F] Fixed bug when ATT lockups in System Information module under Windows 64.[*] Updated ATT Shared Memory. Included information about free Video/Texture memory, current 3D api and System Memory used by game. Last two fields will be updated only if any 3D application is active and in FlashOSD interval.[*] Recreated color correction procedure. Now colors will be changed automatically on all available displays. Added support for color correction on X1300/X1600/X1800/X1900[*] Added option in Game Profiles to adjust interval in seconds in which ATT will check and update current colors in game. Default value is 10 seconds.
[F] Fixed incorrect FPS color rendering for DirectX and old Direct3D games

Enjoy!

win2k/xp http://www.omegadrivers.net/ati/win2k_xp.php

altre info@ driverheaven http://www.driverheaven.net/showthread.php?t=96763

per info e domande su ati tray tools http://www.hwupgrade.it/forum/showthread.php?t=980634

Cobra78 · 19-01-2006, 09:43

Beeeen, ero ancora agli Omega basati sui 5.11.

Oggi pomeriggio quiando torno dall'esame all'uni scarico e installo

(prima il dovere......)

REPERGOGIAN · 19-01-2006, 22:35

dai raga non fate i timidi, su

Cobra78 · 20-01-2006, 09:23

Scaricati, appena ho tempo installo e testo :P

cig84 · 20-01-2006, 09:25

.......mmmmm non so perchè, ma giocando a madden 2006 mi scomparivano i corpi dei giocatori........qualche idea?

REPERGOGIAN · 20-01-2006, 10:52

no

scheda video?

cig84 · 20-01-2006, 14:34

mobility radeon 9700 64 MB

^KoraX^ · 20-01-2006, 16:03

provati ! ho perso punti in tutti i 3d mark ! nn eccessivi ! ma sempre persi !

raul83 · 20-01-2006, 17:20

ciao!ankio gli ho provati...risultato: ho perso circa 600punti al 3dmark03 e 100 al 3dmark2001se.....

rispetto ai 5.13 ufficiali (che fra l'altro sono allineati con i 6.1,ho avuto 10punti di differenza)

REPERGOGIAN · 20-01-2006, 17:22

ma nei giochi come vi vanno?

il 3dmark viene in secondo piano

raul83 · 20-01-2006, 17:25

Quote:

Originariamente inviato da REPERGOGIAN

ma nei giochi come vi vanno?

il 3dmark viene in secondo piano

io preferisco i catalyst ufficiali rispetto a questi....x lo meno giocando a pes5.....

lele980 · 20-01-2006, 18:02

nn ho mai capito la differenza generale dei catalyst ufficiali rispetto agli omega

REPERGOGIAN · 20-01-2006, 18:07

c'è qualche opzione in +
provali che non costa nulla

a livello prestazionale sono come i cata

lele980 · 20-01-2006, 18:18

per ora ho ancora i 5.10!!

e che CCC nn mi va giu'
preferivo il vecchio pannello di controllo

REPERGOGIAN · 20-01-2006, 18:22

gli omega non hanno il ccc
driver + vecchio pannello + att

lele980 · 20-01-2006, 18:32

ah! questo si che è interessante allora se sono validi una prova la faccio

Duke.N.4ever · 20-01-2006, 19:40

Ottimo mi serviva sapere se gli omega non avevano ccc ottimo nn lo hanno

Onoreromano · 21-01-2006, 01:53

Per installare i nuovi Omega drivers devo prima disinstallare i vecchi, o vengono automaticamente sovrascritti?

REPERGOGIAN · 21-01-2006, 07:02

disinstalla sempre i vecchi

Zepelin_22 · 24-01-2006, 03:42

scusate ragazzi io ho installato questo pomeriggio gli omega 6.1 da mio cugino e non ho trovato l'opzione per installare il vecchio cp al posto del nuovo ccc!!!
mi é sfuggito qualcosa oppure ho capito male alcuni post?

19-01-2006, 07:18	#1
REPERGOGIAN Senior Member Iscritto dal: Apr 2003 Città: just in case..uh Messaggi: 18921	Radeon Omega Drivers 3.8.205 (Cat 6.1) RICORDO CHE GLI OMEGA NON HANNO IL FAMIGERATO CCC catalys control center MA IL VECCHIO E SANO PANNELLO (01/18/06) The new Omega Drivers based on the Catalyst 6.1 are ready! Well, in case you didn't noticed by now, I decided to skip the Catalyst 5.13 drivers and went directly to the 6.1, Why? well, there where no major changes from 5.13 to 6.1, so I waited for the official version to be released and use that instead (I had the beta for a while). Please go to the ATI Radeon section and take a look at the Readme while downloading so you know the latest changes, additions to this set and some important notes or warnings. Enjoy! readme What's New in Omega Drivers? v3.8.205 [] Based on the Catalyst 6.1 Official drivers. [+] Starting from this set, I will use my own version internally for the Catalyst drivers, instead of using 6.1, 6.2, etc, I will be naming them 6.01, 6.02, etc, this will make the Cat versions less confusing and more "logical".[] Updated Multires to v1.56. (fixes the "non-supported" resolutions bug) [+] New version naming scheme for the Omega Drivers, now is based on the internal ATI version number than in the 2D Display version. [b]What's new for ATI Tray Tools? 1.0.5.815 [F] Fixed bug when ATT produce BSOD at start up on some motherboards like Asus P5WD2[] Improved current 3D settings detection on new Catalyst installation [F] Fixed bug with wrong detection of current level of Adaptive AA. [+] "Save Icon Position" module now will save positions for each resolution you will use. Saved positions are incompatible between different resolutions. [+] Added new module in monitoring graphs. "Motherboard Resources". Now you can directly monitor temperatures, voltages on your motherboard! Big thanks to OverSoft team for SIO Engine plugin. Full supported sensors Winbond: W83627HF, W83637HF, W83627THF, W83782D, W83781D, W83697HF, W83627EHF ITE: IT8705F, IT8712F. Abit uGuru. Partially supported Winbond W83647HF, Asus AS99127F, Fintek F71872. This module in beta test stage. [+] Added support for custom FPS color in game profiles. Only for OpenGL/Direct3D8/Direct3D9 Games and applications. For old Direct3D and DirectX games (Direct3D7/6/5) custom FPS color will be used only if game will use 32 bits color format in rendering procedure.[] Updated Core names database. Included information about R580, R600, RV370X, RV371, RV530 LE/SE/VE chips. [+] Added information about X1900 boards[] Now Overclocking and Monitoring disabled by default for R5xx boards. Until I find more information about overclocking new ATI chips.[] Now ATT will not update Monitoring Tray Icons if registered games is active.[] Moved all overclocking procedures into Kernel mode driver.[] Updated I2C procedures.[] Updated OSD plugin "Motherboard resources". Added support for internal ATT Motherboard monitor sources.[] Updated plugins API. Included functions to access internal Motherboard monitor information. Some function has been updated for OSD Plugins. Please refer to readme.txt in plugins folder. All third party runtime and OSD plugins with configuration procedures must be updated.[] I2C Dump procedure now can be directly accessed in System Information module. [F] Fixed wrong CRT + TV detection in System Information module. [+] Updated texture LOD adjustment procedure. Now you can select positive value, which can increase performance, but in result of very bad quality. [+] Added support for HDTV modes in Display module.[] Improved TV/Display module support under Windows XP 64 [F] Fixed situation when ATT unable to properly detect supported display types [F] Fixed bug when ATT lockups in System Information module under Windows 64.[] Updated ATT Shared Memory. Included information about free Video/Texture memory, current 3D api and System Memory used by game. Last two fields will be updated only if any 3D application is active and in FlashOSD interval.[] Recreated color correction procedure. Now colors will be changed automatically on all available displays. Added support for color correction on X1300/X1600/X1800/X1900[] Added option in Game Profiles to adjust interval in seconds in which ATT will check and update current colors in game. Default value is 10 seconds. [F] Fixed incorrect FPS color rendering for DirectX and old Direct3D games Enjoy! win2k/xp http://www.omegadrivers.net/ati/win2k_xp.php altre info@ driverheaven http://www.driverheaven.net/showthread.php?t=96763 per info e domande su ati tray tools* http://www.hwupgrade.it/forum/showthread.php?t=980634 __________________ Veyron SS: 4th at 1.16.08 Ultima modifica di REPERGOGIAN : 30-01-2006 alle 19:21.

19-01-2006, 09:43	#2
Cobra78 Senior Member Iscritto dal: Mar 2005 Città: Ravenna Messaggi: 1937	Beeeen, ero ancora agli Omega basati sui 5.11. Oggi pomeriggio quiando torno dall'esame all'uni scarico e installo (prima il dovere......) __________________ Dell Inspiron 1720 Ice White Windows 7 Pro/Archlinux x86_64 - 3.0.x -Gnome3 Msi Wind U100 Windows Xp/Ubuntu 11.04 - Gnome3

19-01-2006, 22:35	#3
REPERGOGIAN Senior Member Iscritto dal: Apr 2003 Città: just in case..uh Messaggi: 18921	dai raga non fate i timidi, su __________________ Veyron SS: 4th at 1.16.08

20-01-2006, 09:23	#4
Cobra78 Senior Member Iscritto dal: Mar 2005 Città: Ravenna Messaggi: 1937	Scaricati, appena ho tempo installo e testo :P __________________ Dell Inspiron 1720 Ice White Windows 7 Pro/Archlinux x86_64 - 3.0.x -Gnome3 Msi Wind U100 Windows Xp/Ubuntu 11.04 - Gnome3

20-01-2006, 09:25	#5
cig84 Member Iscritto dal: Nov 2005 Città: Madrid Messaggi: 160	problema...... .......mmmmm non so perchè, ma giocando a madden 2006 mi scomparivano i corpi dei giocatori........qualche idea?

20-01-2006, 10:52	#6
REPERGOGIAN Senior Member Iscritto dal: Apr 2003 Città: just in case..uh Messaggi: 18921	no scheda video? __________________ Veyron SS: 4th at 1.16.08

20-01-2006, 14:34	#7
cig84 Member Iscritto dal: Nov 2005 Città: Madrid Messaggi: 160	mobility radeon 9700 64 MB

20-01-2006, 16:03	#8
^KoraX^ Senior Member Iscritto dal: Jun 2003 Città: Padova Messaggi: 965	provati ! ho perso punti in tutti i 3d mark ! nn eccessivi ! ma sempre persi !

20-01-2006, 17:20	#9
raul83 Senior Member Iscritto dal: Nov 2005 Città: Milano Messaggi: 521	ciao!ankio gli ho provati...risultato: ho perso circa 600punti al 3dmark03 e 100 al 3dmark2001se..... rispetto ai 5.13 ufficiali (che fra l'altro sono allineati con i 6.1,ho avuto 10punti di differenza)

20-01-2006, 17:22	#10
REPERGOGIAN Senior Member Iscritto dal: Apr 2003 Città: just in case..uh Messaggi: 18921	ma nei giochi come vi vanno? il 3dmark viene in secondo piano __________________ Veyron SS: 4th at 1.16.08

20-01-2006, 18:02	#12
lele980 Senior Member Iscritto dal: Mar 2004 Città: Napoli Messaggi: 10369	nn ho mai capito la differenza generale dei catalyst ufficiali rispetto agli omega __________________ Argenio Napoli \| VENDO VARIE \| Le Mie Trattative (45) AMD 9600x - RTX 5060 - 16gb DDR5 - Crucial BX500 - WD 2x3tb - Corsair RM850x - Hp Envy 32" 1440p INTEL 4790K - HD4600 - 16gb DDR3 - SanDisk 240gb - Corsair CX650 - AOC 27''

20-01-2006, 18:07	#13
REPERGOGIAN Senior Member Iscritto dal: Apr 2003 Città: just in case..uh Messaggi: 18921	c'è qualche opzione in + provali che non costa nulla a livello prestazionale sono come i cata __________________ Veyron SS: 4th at 1.16.08

20-01-2006, 18:18	#14
lele980 Senior Member Iscritto dal: Mar 2004 Città: Napoli Messaggi: 10369	per ora ho ancora i 5.10!! e che CCC nn mi va giu' preferivo il vecchio pannello di controllo __________________ Argenio Napoli \| VENDO VARIE \| Le Mie Trattative (45) AMD 9600x - RTX 5060 - 16gb DDR5 - Crucial BX500 - WD 2x3tb - Corsair RM850x - Hp Envy 32" 1440p INTEL 4790K - HD4600 - 16gb DDR3 - SanDisk 240gb - Corsair CX650 - AOC 27''

20-01-2006, 18:22	#15
REPERGOGIAN Senior Member Iscritto dal: Apr 2003 Città: just in case..uh Messaggi: 18921	gli omega non hanno il ccc driver + vecchio pannello + att __________________ Veyron SS: 4th at 1.16.08

20-01-2006, 18:32	#16
lele980 Senior Member Iscritto dal: Mar 2004 Città: Napoli Messaggi: 10369	ah! questo si che è interessante allora se sono validi una prova la faccio __________________ Argenio Napoli \| VENDO VARIE \| Le Mie Trattative (45) AMD 9600x - RTX 5060 - 16gb DDR5 - Crucial BX500 - WD 2x3tb - Corsair RM850x - Hp Envy 32" 1440p INTEL 4790K - HD4600 - 16gb DDR3 - SanDisk 240gb - Corsair CX650 - AOC 27''

20-01-2006, 19:40	#17
Duke.N.4ever Senior Member Iscritto dal: May 2004 Città: Bellano (LC) Messaggi: 808	Ottimo mi serviva sapere se gli omega non avevano ccc ottimo nn lo hanno __________________ CPU Amd Ryzen7 7800X3D - Scheda Madre Asrock X670E Pro RS - 32Gb DDR5 6000 Flare Gskill - SSD Corsair MP600 PRO - Scheda Video Sapphire Pulse RX6750XT - Case CM 590 - Ali Corsair Rm750e - Dissi Phantom Spirit

21-01-2006, 01:53	#18
Onoreromano Junior Member Iscritto dal: Jan 2006 Messaggi: 27	Per installare i nuovi Omega drivers devo prima disinstallare i vecchi, o vengono automaticamente sovrascritti? __________________ Packard Bell S8410: Pentium M 750 1.86 Ghz - Hard Disk 80 Gb 5.400 rpm - Ram 1024 Mb DDR2 533mhz - Ati X700 256Mb Hypermemory

21-01-2006, 07:02	#19
REPERGOGIAN Senior Member Iscritto dal: Apr 2003 Città: just in case..uh Messaggi: 18921	disinstalla sempre i vecchi __________________ Veyron SS: 4th at 1.16.08

24-01-2006, 03:42	#20
Zepelin_22 Senior Member Iscritto dal: Jul 2003 Messaggi: 937	scusate ragazzi io ho installato questo pomeriggio gli omega 6.1 da mio cugino e non ho trovato l'opzione per installare il vecchio cp al posto del nuovo ccc!!! mi é sfuggito qualcosa oppure ho capito male alcuni post? __________________ Il mio Blog

Strumenti
Mostra una versione stampabile Invia questa pagina per email