Catalyst 5.13 OUT

baila · 21-12-2005, 19:07

New Features

This section provides information on new features that are introduced in this release of Catalyst®. New features include:

* H.264 Hardware Acceleration
* ATI CrossFire™ Support for the ATI Radeon® X1800
* HQV Video Benchmark Support

H.264 Hardware Acceleration

Catalyst® 5.13 software suite introduces H.264 hardware acceleration for the ATI Radeon® X1800, X1600, and X1300 product line. H.264 is advanced video coding that provides significant reduction in bit-rate compared to standards such as MPEG-2 and MPEG-4. The ATI Radeon® X1800, X1600, and X1300 products provide hardware acceleration for the playback of high-definition content that is encoded using H.264. Using the Catalyst® software suite 5.13, along with the Cyberlink H.264 decoder available from http://www.ati.com/technology/h264.html provides H.264 hardware acceleration.
ATI CrossFire™ Support for the ATI Radeon® X1800

ATI CrossFire™ allows for multiple Graphics Processing Units (GPUs) to be placed within a single PC, to provide superior gaming performance. The Catalyst® 5.13 software suite is the first Catalyst® to provide ATI CrossFire™ support. CrossFire™ support is available when an ATI Radeon® X1800 CrossFire™ Edition product is installed with another Radeon® X1800 product. Further information on ATI CrossFire™ can be found at: http://www.ati.com/technology/crossfire/faq.html
HQV Video Benchmark Support

The Catalyst® software suite 5.13 introduces full support for the HQV DVD Benchmark. These driver tweaks provide a better DVD image quality, and higher benchmark scores.
Issues Resolved in Catalyst® Software Suite 5.13

The following section provides a summary of the issues that have been resolved in the latest version of Catalyst®. These include:

* F.E.A.R: Slow game performance is no longer noticed when using CrossFire. Further information on this resolved issue can be found in topic number 737-21270
* The Video Preview no longer fails to change to its default settings when swapping the display mappings using the Catalyst® Control Center. Further information on this resolved issue can be found in topic number 737-21174
* Attempting to stretch the display horizontally using the Catalyst® Control Center, no longer results in the horizontal stretch mode failing to be applied unless the display is stretched vertically first. Further information on this resolved issue can be found in topic number 737-21175
* The PowerPlay™ option found in the Catalyst® Control Center no longer defaults to the enabled state after initial install of the display driver for systems containing an ATI Radeon® Xpress 200 series product. Further information on this resolved issue can be found in topic number 737-21180
* Auto-detect no longer fails to be applied as the default setting for the Deinterlacing option when first entering the Video aspect page of the Catalyst® Control Center. Currently the option is set as Weave. Further information on this resolved issue can be found in topic number 737-21185
* Catalyst® Control Center: Attempting to extend the desktop display when using a CRT, TV and DFP display devices no longer results in display corruption being noticed on the primary display adapter. Further information on this resolved issue can be found in topic number 737-20982
* Attempting to set the CRT as the primary display device after hot-plugging a DFP display device and enabling extended desktop mode, no longer results in the CRT failing to be set as the primary. Further information on this resolved issue can be found in topic number 737-21269
* Catalyst® Control Center: Entering the Overdrive™ aspect and changing the GPU setting to 509 and the memory setting to 505 no longer results in color corruption and the Windows XP operating system rebooting. Further information on this resolved issue can be found in topic number 737-21229

Known Issues for Catalyst® Software Suite 5.13

The following section provides a summary of open issues in the latest version of Catalyst®. These include:

* BattleField 2 Special Forces: A blooming or ghosting effect may be noticed when playing the game in night vision mode. Further details can be found in topic number 737-21263
* Beyond Good and Evil: Flickering artifacts are noticed on the game characters after approximately 15 minutes of game play. Further details can be found in topic number 737-20795
* Dark Age of Camelot: The game exits to the desktop immediately after launching, or may play for up to 15 minutes followed by a VPU Recover error message being displayed. Further details can be found in topic number 737-20794
* Dragonshard: Playing the game under Windows XP Media Center Edition with CrossFire™ enabled, may result screen becoming out of sync, and a scrolling display image occurring shortly there after. Further details can be found in topic number 737-20975
* Fable: The Lost Chapters: Playing the game under Windows XP MCE may result in the shadows found within the game appearing jittery, when the desktop resolution is set to 1024x768 32bpp, and all the game options are set to default. Further details can be found in topic number 737-21184
* Serious Sam 2 Demo: Enabling CrossFire™ may result in a performance drop being noticed when playing the game under Windows XP Media Center Edition. Further details can be found in topic number 737-20976
* WARHAMMER: DAWN OF WAR: Starting a skirmish game on a 4 player map under Windows XP, may result in the game performance appearing choppy when using an ATI Radeon® X800 series, and having all of the game options set to high. Further details can be found in topic number 737-20974
* World of Warcraft: A VPU Recover event may occur when launching the game with high level avatar and rotating or zooming within the Blackwing Lair or within Searing Gorge Further details can be found in topic number 737-21265
* Catalyst® Control Center: The SmartShader™ effect is not removed from the 3D preview when attempting to restore the default values in the Catalyst® Control Center. Further details can be found in topic number 737-20846
* The Apply button in the Custom settings of the Advanced mode, within the Catalyst® Control Center Video standard settings, is grayed out when playing a media file. Further details can be found in topic number 737-497
* Connecting an HDTV to an ATI Radeon® X700 series may result in the HDTV being detected as a CRT or TV under the Windows XP operating system. Further details can be found in topic number 737-20783
* Attempting to install the integrated WDM driver under Windows XP may result in an error message being displayed indicating that the hardware is not installed because the install Wizard cannot find the necessary software. Further details can be found in topic number. 737-20784
* The PAL FM fine tuning algorithm is currently using 200 MHz bandwidth which may overlap FM channels resulting in the same FM channel being found several verdana during the scan function. Further details can be found in topic number 737-20979
* Launching the Adobe Gamma calibration application and moving the gamma slider back and forth, results in the Task Manager being filled with cli.exe until the system becomes low on memory. Further details can be found in topic number 737-20980
* Catalyst® Control Center: The preview for the Deinterlacing aspect found in the Catalyst® Control Center is currently unavailable when using the ATI Radeon® X1300. Further details can be found in topic number 737-20986
* The Video Preview found in the Standard Settings of the Video option of the Catalyst® Control Center may fail to provide a preview after hotplugging an LCD panel to an ATI Radeon 9500 or 9800 and selecting to extend the desktop. Further details can be found in topic number 737-21173
* Connecting two display devices to the ATI Radeon® X850 CrossFire™ Edition and one display device to the ATI Radeon® X850 XT may result in the display device connected to the Radeon® X850 XT still being active once CrossFire™ is enabled. Further details can be found in topic number 737-21177
* The WDM Drivers may not be enumerated due to the Capture chip not being detected when using the ATI Radeon® X850 XT (ViVo) as a slave card on a system containing an ATI Radeon® X850 CrossFire™ Edition. Further details can be found in topic number 737-21178
* The secondary display device may fail to activate when attempting to enable clone mode when using an ATI Radeon® X800 GTO. Further details can be found in topic number 737-21179
* Using the Custom option when installing the software driver results in the Theater™ 550 software driver not being present. Further details can be found in topic number 737-21183
* The apply button may remain inactive when attempting to change the Hue and Saturation settings found in the TV Properties\Avivo Color settings when enabling a TV as the primary display device and a CRT as the secondary display device. Further details can be found in topic number 737-21264
* Connecting two display devices to an ATI Radeon® X1600 series product may result in the device manager failing to detect the secondary display device. Further details can be found in topic number 737-21266

For further information and general help on driver or software installation, game issues, and more, visit ATI Customer Care.

Download

giavial · 21-12-2005, 19:13

Peccato che sul sito il link porta ai 5.12

Lelevt · 21-12-2005, 19:21

Sbaglio o non c'è più il pannello di controllo? Solo quel pesantissimo "Control Center"

Vi prego ditemi che non è vero

giavial · 21-12-2005, 19:21

Quote:

Originariamente inviato da giavial

Peccato che sul sito il link porta ai 5.12

Alle ore 19.20 sono finalmente linkati i 5.13.
Tutto è bene.....
Ciao

ks! · 21-12-2005, 19:34

Quote:

Originariamente inviato da Lelevt

Sbaglio o non c'è più il pannello di controllo? Solo quel pesantissimo "Control Center"

Vi prego ditemi che non è vero

spero che ci siano quelli normali...

kastaldi · 21-12-2005, 19:37

Quote:

Originariamente inviato da Lelevt

Sbaglio o non c'è più il pannello di controllo? Solo quel pesantissimo "Control Center"

Vi prego ditemi che non è vero

Ma non puoi scaricare solo i driver ed usare l'ATI Tray Tools su http://www.guru3d.com/article/atitraytools/189/ che è molto più leggero ed utile ?

baila · 21-12-2005, 19:38

Mettete Ati Tray Tool e siete apposto!

emax81 · 21-12-2005, 20:29

via d test

Zodd_Il_nosferatu · 21-12-2005, 20:45

http://www.tweaktown.com/articles/85...sis/index.html

ATi7500 · 21-12-2005, 21:24

Quote:

Originariamente inviato da Zodd_Il_nosferatu

http://www.tweaktown.com/articles/85...sis/index.html

occhio che i risultati dei 5.12 e 5.13 sono influenzati dalle ottimizzazioni per le cpu dual core

magari avessimo tutti quegli incrementi

bYeZ!

emax81 · 21-12-2005, 21:29

che è sto file ke nn trova?

ATi7500 · 21-12-2005, 21:53

Quote:

Originariamente inviato da emax81

che è sto file ke nn trova?

se per caso usi xp64
http://www.planetamd64.com/lofiversi...php/t4356.html

bYeZ!

emax81 · 21-12-2005, 22:00

Quote:

Originariamente inviato da ATi7500

se per caso usi xp64
http://www.planetamd64.com/lofiversi...php/t4356.html

bYeZ!

XP Prof SP2 Ahimè

...provo a cercare inf in merito

dsx2586 · 21-12-2005, 23:16

Uh, già usciti, ma non erano previsti per domani? Poco male... in download

Pian piano mi ci sto abituando all'accoppiata Driver + ATT

Xfree · 22-12-2005, 10:44

Apperò!!

Per la X850 XT c'è un bell'incremento dai 5.12 ai 5.13, chissà se con i P4 HT c'è un incremento simile, dovrei provarli...

Beelzebub · 22-12-2005, 11:27

Oggi li testo con NFS-MW, vediamo se gira un pò meglio...

Yota79 · 22-12-2005, 12:53

Quote:

Originariamente inviato da Xfree

Apperò!!

Per la X850 XT c'è un bell'incremento dai 5.12 ai 5.13, chissà se con i P4 HT c'è un incremento simile, dovrei provarli...

Incremento di che tipo? puoi farci capire meglio?? Grazie..

Xfree · 22-12-2005, 13:17

Non mi sono spiegato bene?

I grafici mi sembrano abbastanza chiari

, tranne in F.E.A.R. dove il framerate tra le varie versioni è sostanzialmente allineato; io mi chiedevo se con i P4 HT ci poteva essere un incremento simile ma ancora non li ho provati quindi non posso saperlo.

Sawato Onizuka · 22-12-2005, 15:20

Quote:

Originariamente inviato da Xfree

io mi chiedevo se con i P4 HT ci poteva essere un incremento simile ma ancora non li ho provati quindi non posso saperlo.

no non credo si intendeva dual core fisici

quindi chi li ha provati con serie x800 ?

Blackxx · 22-12-2005, 15:26

Quote:

Originariamente inviato da Sawato Onizuka

no non credo si intendeva dual core fisici

quindi chi li ha provati con serie x800 ?

sempre uguali i risultati dalla versione 4.12 ad oggi

21-12-2005, 19:07	#1
baila Senior Member Iscritto dal: Dec 2000 Città: Provincia di Vicenza Messaggi: 13823	Catalyst 5.13 OUT New Features This section provides information on new features that are introduced in this release of Catalyst®. New features include: * H.264 Hardware Acceleration * ATI CrossFire™ Support for the ATI Radeon® X1800 * HQV Video Benchmark Support H.264 Hardware Acceleration Catalyst® 5.13 software suite introduces H.264 hardware acceleration for the ATI Radeon® X1800, X1600, and X1300 product line. H.264 is advanced video coding that provides significant reduction in bit-rate compared to standards such as MPEG-2 and MPEG-4. The ATI Radeon® X1800, X1600, and X1300 products provide hardware acceleration for the playback of high-definition content that is encoded using H.264. Using the Catalyst® software suite 5.13, along with the Cyberlink H.264 decoder available from http://www.ati.com/technology/h264.html provides H.264 hardware acceleration. ATI CrossFire™ Support for the ATI Radeon® X1800 ATI CrossFire™ allows for multiple Graphics Processing Units (GPUs) to be placed within a single PC, to provide superior gaming performance. The Catalyst® 5.13 software suite is the first Catalyst® to provide ATI CrossFire™ support. CrossFire™ support is available when an ATI Radeon® X1800 CrossFire™ Edition product is installed with another Radeon® X1800 product. Further information on ATI CrossFire™ can be found at: http://www.ati.com/technology/crossfire/faq.html HQV Video Benchmark Support The Catalyst® software suite 5.13 introduces full support for the HQV DVD Benchmark. These driver tweaks provide a better DVD image quality, and higher benchmark scores. Issues Resolved in Catalyst® Software Suite 5.13 The following section provides a summary of the issues that have been resolved in the latest version of Catalyst®. These include: * F.E.A.R: Slow game performance is no longer noticed when using CrossFire. Further information on this resolved issue can be found in topic number 737-21270 * The Video Preview no longer fails to change to its default settings when swapping the display mappings using the Catalyst® Control Center. Further information on this resolved issue can be found in topic number 737-21174 * Attempting to stretch the display horizontally using the Catalyst® Control Center, no longer results in the horizontal stretch mode failing to be applied unless the display is stretched vertically first. Further information on this resolved issue can be found in topic number 737-21175 * The PowerPlay™ option found in the Catalyst® Control Center no longer defaults to the enabled state after initial install of the display driver for systems containing an ATI Radeon® Xpress 200 series product. Further information on this resolved issue can be found in topic number 737-21180 * Auto-detect no longer fails to be applied as the default setting for the Deinterlacing option when first entering the Video aspect page of the Catalyst® Control Center. Currently the option is set as Weave. Further information on this resolved issue can be found in topic number 737-21185 * Catalyst® Control Center: Attempting to extend the desktop display when using a CRT, TV and DFP display devices no longer results in display corruption being noticed on the primary display adapter. Further information on this resolved issue can be found in topic number 737-20982 * Attempting to set the CRT as the primary display device after hot-plugging a DFP display device and enabling extended desktop mode, no longer results in the CRT failing to be set as the primary. Further information on this resolved issue can be found in topic number 737-21269 * Catalyst® Control Center: Entering the Overdrive™ aspect and changing the GPU setting to 509 and the memory setting to 505 no longer results in color corruption and the Windows XP operating system rebooting. Further information on this resolved issue can be found in topic number 737-21229 Known Issues for Catalyst® Software Suite 5.13 The following section provides a summary of open issues in the latest version of Catalyst®. These include: * BattleField 2 Special Forces: A blooming or ghosting effect may be noticed when playing the game in night vision mode. Further details can be found in topic number 737-21263 * Beyond Good and Evil: Flickering artifacts are noticed on the game characters after approximately 15 minutes of game play. Further details can be found in topic number 737-20795 * Dark Age of Camelot: The game exits to the desktop immediately after launching, or may play for up to 15 minutes followed by a VPU Recover error message being displayed. Further details can be found in topic number 737-20794 * Dragonshard: Playing the game under Windows XP Media Center Edition with CrossFire™ enabled, may result screen becoming out of sync, and a scrolling display image occurring shortly there after. Further details can be found in topic number 737-20975 * Fable: The Lost Chapters: Playing the game under Windows XP MCE may result in the shadows found within the game appearing jittery, when the desktop resolution is set to 1024x768 32bpp, and all the game options are set to default. Further details can be found in topic number 737-21184 * Serious Sam 2 Demo: Enabling CrossFire™ may result in a performance drop being noticed when playing the game under Windows XP Media Center Edition. Further details can be found in topic number 737-20976 * WARHAMMER: DAWN OF WAR: Starting a skirmish game on a 4 player map under Windows XP, may result in the game performance appearing choppy when using an ATI Radeon® X800 series, and having all of the game options set to high. Further details can be found in topic number 737-20974 * World of Warcraft: A VPU Recover event may occur when launching the game with high level avatar and rotating or zooming within the Blackwing Lair or within Searing Gorge Further details can be found in topic number 737-21265 * Catalyst® Control Center: The SmartShader™ effect is not removed from the 3D preview when attempting to restore the default values in the Catalyst® Control Center. Further details can be found in topic number 737-20846 * The Apply button in the Custom settings of the Advanced mode, within the Catalyst® Control Center Video standard settings, is grayed out when playing a media file. Further details can be found in topic number 737-497 * Connecting an HDTV to an ATI Radeon® X700 series may result in the HDTV being detected as a CRT or TV under the Windows XP operating system. Further details can be found in topic number 737-20783 * Attempting to install the integrated WDM driver under Windows XP may result in an error message being displayed indicating that the hardware is not installed because the install Wizard cannot find the necessary software. Further details can be found in topic number. 737-20784 * The PAL FM fine tuning algorithm is currently using 200 MHz bandwidth which may overlap FM channels resulting in the same FM channel being found several verdana during the scan function. Further details can be found in topic number 737-20979 * Launching the Adobe Gamma calibration application and moving the gamma slider back and forth, results in the Task Manager being filled with cli.exe until the system becomes low on memory. Further details can be found in topic number 737-20980 * Catalyst® Control Center: The preview for the Deinterlacing aspect found in the Catalyst® Control Center is currently unavailable when using the ATI Radeon® X1300. Further details can be found in topic number 737-20986 * The Video Preview found in the Standard Settings of the Video option of the Catalyst® Control Center may fail to provide a preview after hotplugging an LCD panel to an ATI Radeon 9500 or 9800 and selecting to extend the desktop. Further details can be found in topic number 737-21173 * Connecting two display devices to the ATI Radeon® X850 CrossFire™ Edition and one display device to the ATI Radeon® X850 XT may result in the display device connected to the Radeon® X850 XT still being active once CrossFire™ is enabled. Further details can be found in topic number 737-21177 * The WDM Drivers may not be enumerated due to the Capture chip not being detected when using the ATI Radeon® X850 XT (ViVo) as a slave card on a system containing an ATI Radeon® X850 CrossFire™ Edition. Further details can be found in topic number 737-21178 * The secondary display device may fail to activate when attempting to enable clone mode when using an ATI Radeon® X800 GTO. Further details can be found in topic number 737-21179 * Using the Custom option when installing the software driver results in the Theater™ 550 software driver not being present. Further details can be found in topic number 737-21183 * The apply button may remain inactive when attempting to change the Hue and Saturation settings found in the TV Properties\Avivo Color settings when enabling a TV as the primary display device and a CRT as the secondary display device. Further details can be found in topic number 737-21264 * Connecting two display devices to an ATI Radeon® X1600 series product may result in the device manager failing to detect the secondary display device. Further details can be found in topic number 737-21266 For further information and general help on driver or software installation, game issues, and more, visit ATI Customer Care. Download __________________ AMD Ryzen™ 9 5900X/Cosmos C700P/Crosshair VII HERO (WI-FI) /Corsair AX 850Watt 80 PLUS Gold/HyperX Predator HX440C19PB3K2 B-Die@3600Mhz /Nvdia RTX 4070TI/Samsung 980 PRO NVMe M.2 2TB X2/Sound Blaster Z/Monitor LG 32GK850G/Pianeta Fibra FTTH2500/500->GT-AX6000/Le mie trattative

21-12-2005, 19:13	#2
giavial Senior Member Iscritto dal: Jan 2001 Città: Padova Messaggi: 7019	Peccato che sul sito il link porta ai 5.12 __________________ HAF932-CorsairRM1000-MSI MAG Z790 Tomahawk-Intel I7 13700K-32G Corsair Vengeance 6000-SSD Samsung 990 Pro Heat Sink-Corsair iCUE H100i Elite-AMD RX 6900XT Reference-ASUS ROG XG35VQ 3440/1440-Logitech G510-Sound BlasterX Katana 7+1

21-12-2005, 19:21	#3
Lelevt Senior Member Iscritto dal: Jul 2001 Città: Oderzo (TV) Messaggi: 1289	Sbaglio o non c'è più il pannello di controllo? Solo quel pesantissimo "Control Center" Vi prego ditemi che non è vero __________________ [size="1"]Ryzen 5 5800 - ROG STRIX B550-XE -Radeon RX 6700 - Fractal Design Define C -

21-12-2005, 19:38	#7
baila Senior Member Iscritto dal: Dec 2000 Città: Provincia di Vicenza Messaggi: 13823	Mettete Ati Tray Tool e siete apposto! __________________ AMD Ryzen™ 9 5900X/Cosmos C700P/Crosshair VII HERO (WI-FI) /Corsair AX 850Watt 80 PLUS Gold/HyperX Predator HX440C19PB3K2 B-Die@3600Mhz /Nvdia RTX 4070TI/Samsung 980 PRO NVMe M.2 2TB X2/Sound Blaster Z/Monitor LG 32GK850G/Pianeta Fibra FTTH2500/500->GT-AX6000/Le mie trattative

21-12-2005, 20:29	#8
emax81 Senior Member Iscritto dal: Jul 2000 Messaggi: 21363	Ottimo via d test __________________ [  ]_MacBook Pro (14", 2021)_macOS 26.3 \| Studio Display_17\| iPhone 13 mini_iOS 26.3\| iPad mini (A17 Pro)_iPadOS 26.3 \| WATCH S11 Ti _watchOS 26.3\| tv 4K (2022)_tvOS 26.3 \| AirPods Pro 3_8B34 \|2x HomePod (2023)_26.2 Theater mode [ UniFi ] UDR7_5.0.13 UDB_6.5.87 UPS Tower_1.4.23 UniFi Network_10.1.84\| Doorbell Lite, G6 Instant_5.1.240 Smart Chime_1.7.20 UniFi Protect_6.2.88\|UNAS 2_5.0.12 UniFi Drive_4.4.11

21-12-2005, 20:45	#9
Zodd_Il_nosferatu Senior Member Iscritto dal: Sep 2004 Città: Roma (prima porta) Messaggi: 3703	http://www.tweaktown.com/articles/85...sis/index.html __________________ MY PC: Intel i7 8700k @4.8ghz, 16gb ram ddr4(2600mhz), Gigabyte Z370P-D3, Strix vega64 (@1680/1050), Sound Blaster xfi titanium, Samsung 960evo 500gb trattato positivamente con: robby66; Emulatore; fabrimax84

21-12-2005, 21:29	#11
emax81 Senior Member Iscritto dal: Jul 2000 Messaggi: 21363	thunk.exe che è sto file ke nn trova? __________________ [  ]_MacBook Pro (14", 2021)_macOS 26.3 \| Studio Display_17\| iPhone 13 mini_iOS 26.3\| iPad mini (A17 Pro)_iPadOS 26.3 \| WATCH S11 Ti _watchOS 26.3\| tv 4K (2022)_tvOS 26.3 \| AirPods Pro 3_8B34 \|2x HomePod (2023)_26.2 Theater mode [ UniFi ] UDR7_5.0.13 UDB_6.5.87 UPS Tower_1.4.23 UniFi Network_10.1.84\| Doorbell Lite, G6 Instant_5.1.240 Smart Chime_1.7.20 UniFi Protect_6.2.88\|UNAS 2_5.0.12 UniFi Drive_4.4.11

21-12-2005, 23:16	#14
dsx2586 Bannato Iscritto dal: May 2003 Città: San Gimignano (Siena) - /!\ bannato con onore per cambio nick: ora sono erythraeum /!\ Messaggi: 919	Uh, già usciti, ma non erano previsti per domani? Poco male... in download Pian piano mi ci sto abituando all'accoppiata Driver + ATT

22-12-2005, 10:44	#15
Xfree Senior Member Iscritto dal: Aug 2001 Messaggi: 9538	Apperò!! Per la X850 XT c'è un bell'incremento dai 5.12 ai 5.13, chissà se con i P4 HT c'è un incremento simile, dovrei provarli... __________________ "Experience is what you get when you don't get what you want." (Randy Pausch)

22-12-2005, 11:27	#16
Beelzebub Senior Member Iscritto dal: Apr 2003 Città: Genova Messaggi: 17635	Oggi li testo con NFS-MW, vediamo se gira un pò meglio... __________________ PSU Corsair 520HX \| Case Corsair Graphite T380 Black \| Mobo AsRock Z97E ITX/AC \| CPU Intel i5 4690 \| Dissi Noctua NH-L12 \| RAM Corsair Vengeance 16Gb DDR3 \| GPU Msi GTX 970 Gaming 4G \| SSD Crucial MX100 256 Gb + HDD WD 500Gb \| Tasietra Logitech G910 \| Mouse Logitech G502 Lightspeed \| Cuffie Logitech G935 \| Monitor LG IPS237L \| Profilo Steam \| Btag: BelzeHWup#1129 \|

22-12-2005, 13:17	#18
Xfree Senior Member Iscritto dal: Aug 2001 Messaggi: 9538	Non mi sono spiegato bene? I grafici mi sembrano abbastanza chiari , tranne in F.E.A.R. dove il framerate tra le varie versioni è sostanzialmente allineato; io mi chiedevo se con i P4 HT ci poteva essere un incremento simile ma ancora non li ho provati quindi non posso saperlo. __________________ "Experience is what you get when you don't get what you want." (Randy Pausch)

Strumenti
Mostra una versione stampabile Invia questa pagina per email