COME VA QUESTA MOBO?

[Neil72]

Ragazzi vorrei passare a P4 e sarei intenzionato a questa mobo:

DFI 925X-T2 Lan Party Intel 925X-775 Intel Sk-DDR2 PCXSATA RETAIL

DFI 925X-T2 Lan Party - Intel 925X-775 Intel Sk-DDR2 Dual Channel-Pci Express-SATA RETAIL - Audio 8 Ch - Dual GigaLan

# LAN PARTY 925X-T2 exclusive features Karajan Audio(Dolby 7.1 /8ch supported)
# Dual Gigabit LAN(1xPCI interface, 1xPCIe interface)
# 100% Japanese Capacitors
# SATA/ PATA converting daughter Card
# CMOS reloaded
# All New Genie BIOS
# UV sensitive slots
# New FrontX
(SATA port,Spdif optical out,Mini1394,Debug LED lights)
# PC Transpo
# EZ-on / EZ-touch

pecifiche tecniche
CPU


# Intel® Pentium® 4 Prescott processor
- Hyper-Threading Technology
- 800MT/s (200MHz) system bus interface
# Socket LGA 775 (LAN Grid Array)

Chipset


# Intel® 925X chipset
- Intel® 925X Memory Controller Hub (MCH)
- Intel® 82801FR I/O Controller Hub (ICH6R)

Memory


# Four 240-pin DDR2 DIMM sockets
# Supports dual channel (128-bit wide) memory interface
# Supports up to 4GB system memory
# Supports DDR2 400 and DDR2 533 DIMMs
# Supports ECC (x8) or non-ECC x8 and x16 DIMMs
# Supports 256Mb and 512Mb DRAM densities
# Supports Performance Acceleration Technology (PAT2)
# Supports unbuffered DIMMs

BIOS


# Award BIOS
# Genie BIOS provides:
- CPU/DRAM overclocking
- CPU/NB/DRAM overvoltage
# 4Mbit flash memory

Power Management


# Supports ACPI specification and OS Directed Power Management
# Supports ACPI STR (Suspend to RAM) function
# Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
- Wake-On-Ring (external modem)
- Wake-On-LAN
- RTC timer to power-on the system
# AC power failure recovery

Hardware Monitor


# Monitors CPU/system temperature and overheat alarm
# Monitors 12V/5V/3.3V/Vcore/Vbat/5Vsb/3.3Vsb voltages
# Monitors the speed of the CPU/system fan
# CPU Overheat Protection function monitors CPU temperature and fan
during system boot-up - automatic shutdown upon system overheat

Audio


# Azalia audio codec with independent variable sampling rate
# S/PDIF-in/out interface
# 8-channel audio output

LAN


# Gigabit ethernet controllers - Marvell 88E8053 PCI Express and Marvell 88E8001 PCI
# Full duplex support at both 10 Mbps, 100 Mbps and 1Gbps

IDE


# Supports ATA/33, ATA/66 and ATA/100 hard drives

Serial ATA with RAID


# Supports four SATA (Serial ATA) interfaces which are compliant with SATA 1.0
specification (1.5Gbps interface)
# Supports RAID 0, RAID 1 and JBOD

IEEE 1394


# Supports two 100/200/400 Mb/sec ports

Rear Panel I/O Ports


# 1 mini-DIN-6 PS/2 mouse port
# 1 mini-DIN-6 PS/2 keyboard port
# 2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
# Karajan audio card (6 audio jacks)
# 1 IEEE 1394 port
# 2 RJ45 LAN ports
# 6 USB 2.0/1.1 ports

I/O Connectors


# 1 connector for 2 additional external USB 2.0/1.1 ports
# 1 connector for 1 external IEEE 1394 port
# 1 connector for 1 external serial port
# 1 front audio connector for external line-out and mic-in jacks
# 1 CD-in internal audio connector
# 1 S/PDIF connector for optical cable connection
# 1 IR connector
# 1 CIR connector
# 4 Serial ATA connectors
# 1 IDE connector
# 1 floppy connector
# 2 ATX power supply connectors
# 5 fan connectors
# 4 diagnostic LEDs
# 1 diagnostic LED connector for external 4 diagnostic LEDs display
# EZ touch switches (power switch and reset switch)

Expansion Slots


# 1 PCI Express x16 slot
# 3 PCI Express x1 slots
# 3 PCI slots

Compatibility


# PCI 2.2 and Azalia compliant

PCB


# 6 layers, ATX form factor
# 24.5cm (9.64") x 30.5cm (12")

Non mi convince il chipset intel, in alternativa dove mi butto?

Preferirei Dfi, ma consigliatemi