|
|||||||
|
|
|
 |
|
|
Strumenti |
23-11-2005, 16:29
|
#1 |
|
Junior Member
Iscritto dal: Nov 2005
Messaggi: 2
|
PROBLEMI SCRITTURA PLEXTOR PX-740A
Ciao a tutti, questa è la mia prima richiesta d’aiuto. Ho sempre risolto mille problemi grazie al forum ma adesso non so come uscire da questo che per me è un vero e proprio rompicapo.
Ho un masterizzatore Plextor PX-740A nuovo di zecca collegato con box IDE 5,25 combo al mio portatile. Il drive legge perfettamente tutti i supporti, ma non masterizza né cd né dvd. Ho provato un’infinità di volte con supporti di almeno 5 marche diverse. Ho provato sia USB che Firewire. Niente. Ho provato con un altro PC, con un programma di masterizzazione di cui non ricordo il nome (non era dei più popolari, qualcosa come MyDVD, o simile). Niente. Premetto che ho aggiornato il firmware del masterizzatore. Ho provato a installare gli ASPI, ma il risultato non cambia. E la modalità DMA è attivata. Uso NERO 6.6.0.16 e il messaggio di errore che mi da, dopo un minuto appena, è del tipo Reset Occurred – Disc Changed – Ecc (di seguito il log di una simulazione di scrittura fallita). Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18.35.34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <PLEXTOR DVDR PX-740A> Version: 1.01 - HA 2 TA 0 - 6.6.0.16 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <MATSHITA UJDA730 DVD/CDRW>Version: 1.00 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N020ATCS04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA UJDA730 DVD/CDRW atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === MATSHITA UJDA730 DVD/CDRW E: CDRom0 PLEXTOR DVDR PX-740A H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 49283072 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 319MB (327132kB) Free physical memory: 113MB (116500kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.11.2005 ISO compilation 18.17.41 #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 18.17.41 #2 Text 0 File Reader.cpp, Line 127 Reader running 18.17.41 #3 Text 0 File Writer.cpp, Line 122 Writer PLEXTOR DVDR PX-740A running 18.17.41 #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 18.17.41 #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 18.17.42 #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 938303 (208:30.53, 1832MB) 18.17.42 #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 18.17.42 #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PLEXTOR DVDR PX-740A, Media type: DVD-R Disc Manufacturer: POMS3A - Disc Application Code: 64, Disc Physical Code: 193 18.17.42 #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18.17.42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 938304 (938304) = #938304/208:30.54 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 938304 blocks [PLEXTOR DVDR PX-740A] -------------------------------------------------------------- 18.17.42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PLEXTOR DVDR PX-740A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1921646592, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 938304 | lead-out | 1 | 0x41 | 0x00 18.17.42 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 18.17.44 #13 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 18.17.44 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 18.17.44 #15 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 4x (5.540 KB/s) 18.17.50 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 18.17.50 #17 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 18.17.50 #18 Text 0 File Mmc.cpp, Line 21708 Set BUFE: BURN-Proof -> ON 18.17.50 #19 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 18.17.50 #20 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 18.19.46 #21 SCSI -1114 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x033B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0B 0x00 0x00 0x00 0x00 0x29 0x00 18.19.46 #22 CDR -1114 File Writer.cpp, Line 311 Reset occurred 18.19.46 #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 18.19.46 #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 18.19.46 #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 159 18.19.46 #26 CDR -1076 File WriterStatus.cpp, Line 167 Disc changed 18.19.46 #27 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 18.19.46 #28 Phase 34 File dlgbrnst.cpp, Line 1832 Simulation failed at 4x (5.540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 19.37.14 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11.53.28 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11.53.04 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11.53.30 (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Ecco i dati del mio portatile e il resto: Elemento Valore Computer Sistema operativo Microsoft Windows XP Home Edition Service pack Service Pack 2 DirectX 4.09.00.0904 (DirectX 9.0c) Scheda madre Tipo processore Mobile AMD Athlon XP, 1400 MHz (14 x 100) 1600+ Nome scheda madre Asus L2000D Series Notebook Chipset scheda madre SiS 730S Memoria di sistema 320 MB (SDRAM) Tipo BIOS Award Medallion (11/15/02) Memorizzazione Controller IDE Controller PCI IDE SiS Controller SCSI/RAID VAX347S SCSI Controller Unità floppy Unità disco floppy Unità disco IC25N020ATCS04-0 (20 GB, 4200 RPM, Ultra-ATA/100) Unità disco Maxtor 6L160P0 USB Device (152 GB, USB) Unità ottica COMBO 1394 storage IEEE 1394 SBP2 Device Unità ottica MATSHITA UJDA730 DVD/CDRW (DVD:8x, CD:16x/10x/24x DVD-ROM/CD-RW) Unità ottica SCSIVAX DVD/CD-ROM SCSI CdRom Device Stato dei dischi fissi SMART OK Qualcuno riesce a capirci qualcosa? Io non sono certo un esperto, e non so assolutamente cosa pensare. Grazie a chiunque avesse un minuto per aiutarmi a uscire da questo stallo. JAN |
|
|
|
23-11-2005, 18:27
|
#2 |
|
Senior Member
Iscritto dal: May 2003
Città: venezia
Messaggi: 18964
|
Allora la prima cosa da fare e provare il masterizzatore su un computer normale per vedere se funziona in scrittura .
Seconda cosa provi il box esterno con un altro masterizzatore per vedere se funziona magari su un altro computer . se le prove precedenti hanno dato esito positivo , il problema e nei drive di windows . Prova a reinstallarli o a installare anche le pach per le porte firewire e usb che trovi sul sito microsoft . |
|
|
|
|
23-11-2005, 19:02
|
#3 | ||
|
Junior Member
Iscritto dal: Nov 2005
Messaggi: 2
|
Allora, prima di tutto grazie.
Quote:
Quote:
Che il problema sia proprio il plextor? Domanda: per capire se è difettoso è necessario provarlo montandolo come drive interno? Continio a non capire una mazza.... |
||
|
|
|
|
24-11-2005, 16:38
|
#4 |
|
Senior Member
Iscritto dal: May 2003
Città: venezia
Messaggi: 18964
|
Si , lo devi provare come drive interno su un computer normale .
|
|
|
|
|
|
| Strumenti | |
|
|
Tutti gli orari sono GMT +1. Ora sono le: 19:26.
