compatibiltà tra questa cpu e queste sk madri

[fenomeno83]

volevo sapere se si ha compatibilità tra questa cpu e questa skeda madre:
Intel Celeron D 3.06 GHz 533 MHz 256 KB Socket 478 CPU **
General Features:
- Intel Celeron D processor
- 3.06 GHz Clock Speed
- 533 MHz Bus Speed
- 256 KB L2 Cache
- 478-pin package
- S-Spec: SL7NX
- Brand New

** Matsonic MS9127C Socket 478 ATX Motherboard **
The Matsonic MS9127C ATX motherboard features the VIA
P4X400 + VT8235 chipset and supports up to 3 GB DDR RAM.
The MS9127C supports Intel's Hyper-Threading Technology and
features five PCI slots, an AGP slot, plus integrated audio
and networking. This board supports Intel Pentium 4 and
Celeron processors with 400/533 MHz FSB.
--> General Features:
- VIA P4X400 + VT8235 chipset
- Supports Hyper-Threading technology
- ATX form factor
- Socket 478
- 400/533 MHz FSB
- Supports up to 3 GB DDR RAM (DDR200/266/333)
- Two (2) UDMA/133/100/66/33 IDE controllers
- One (1) floppy controller
- AC'97 integrated audio CODEC
- Integrated 10/100 Ethernet
--> Expansion Slots:
- One (1) AGP 4x/8x slot
- Five (5) PCI slots
- Three (3) 184-pin DIMM slots
--> I/O Ports:
- Two (2) PS/2 ports
- Two (2) 9-pin standard serial port
- One (1) 25-pin standard parallel port
- Six (6) USB 2.0 ports (two on back and four via header)
- One (1) RJ-45 Ethernet jack
- Line in, Microphone, and line-out jacks
--> Supported Processors:
- Intel Pentium 4 Socket 478 processors w/400/533 MHz FSB
- Intel Celeron Socket 478 processors w/400/533 MHz FSB
- (Willamette or Northwood core CPUs only)
--> Regulatory Approvals:
- FCC
- CE
- C-Tick


e con questa skeda madre?
Matsonic MS9337C SiS 648FX Socket 478 ATX Motherboard
General Features:
SiS 648 and SiS 963 chipsets
Socket 478
ATX form factor
Supports up to 3 GB DDR200/266/333 SDRAM
AC'97 Audio Codec
Integrated 10/100 ethernet
Expansion Slots:
One (1) 8x AGP slot
Five (5) PCI slots
One (1) CNR slot
I/O Ports:
Two (2) PS/2 ports
Two (2) 9-pin Serial ports
One (1) Parallel port
One (1) Game/MIDI port
Mic in, Line in, Line out jacks
Two (2) USB ports
One (1) RJ-45 ethernet jack
Supported Processors:
Supports Socket 478 Intel Pentium 4 1.5 GHz ~ 2.5 GHz and above
400/533 MHz System Bus
Regulatory Approvals:
FCC
CE

il mio dubbio sta soprattutto nel fatto ke nn so se tra i celeron include anke i celeron d?
grazie

[pupgna]

forse la seconda non va bene (arriva fino a 2.5 ghz)

[fenomeno83]

dice xò: Supports Socket 478 Intel Pentium 4 1.5 GHz ~ 2.5 GHz and above(significa e superiori)