Grossi problemi a reperire driver MB

[GARRY77]

Il mio sistema è

Computer System
Manufacturer : MICRO-STAR INC.
Model : MS-6704
Version : 100
Serial Number : 00000000
Unique ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF

System Chassis
Manufacturer : Uknown Chassis Manufacture
Case Type : Desktop
Can be locked : No
Version : Version 1.00
Serial Number : 123456890
Asset Tag : 0123ABC

System Mainboard
Manufacturer : MICRO-STAR INC.
MP Support : 1 CPU(s)
MPS Version : 1.40
Model : MS-6704
Version : 100
Serial Number : 00000000
BIOS ID : 63-3000-001169-00101111-040201-845GE/PE

Memory Controller
Error Detection Method : None
Supported/Current Memory Interleave : 1-way / 1-way
Number of Memory Slots : 3
Maximum Installable Memory : 3072MB
Maximum Module Size : 1024MB
Supported Memory Types : DIMM, SDRAM
Supported Memory Voltages : 3.3V

Physical/BIOS Memory Banks
DIMM1 : Empty
DIMM2 : Empty
DIMM3 (RASL-2 RASL-3) : 256MB DIMM SDRAM single-bank

System Chipset
Model : Intel Corporation 82845PE Brookdale Host-Hub Interface Bridge (B0-step)
Bus(es) : ISA AGP IMB USB FireWire/1394 SMBus/i2c
Front Side Bus Speed : 4x 100MHz (400MHz data rate)
Max FSB Speed / Max Memory Speed : 4x 133MHz / 2x 166MHz
In Order Queue Depth : 8 req(s)

Chipset Hub Interface
Type : HubInterface
Version : 1.50
No. Ports : 1
Width : 8-bit
Full Duplex : Yes
Multiplier : 1x
Speed : 4x 66MHz (264MHz data rate)

APIC 1
Version : 2.00
Speed : 17MHz
Multiplier : 1/2x
Max Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes

Logical/Chipset Memory Banks
Bank 3 Setting : 256MB DDR-SDRAM 8-1-1-1R 6-1-1-1W 2.5-2-2CL
Speed : 2x 133MHz (266MHz data rate)
Multiplier : 1.33x
Refresh Rate : 15.60µs
Power Down Mode : No
Fixed Hole Present : No

Memory Module(s)
Memory Module 3 : 256MB 8x(32Mx8) DDR-SDRAM PC2100U-2533-750 (CL2.5 upto 133MHz) (CL2 upto 100MHz)

Environment Monitor 1
Model : Winbond W83627HF ISA
Version : 2.01
Mainboard Specific Support : No

AGP Bus
Version : 2.00
Speed : 66MHz
Max Data Transfer Rate : 4x
Side Band Enabled : No
Side Band Support : Yes
Fast-Writes Enabled : No
Fast-Writes Support : Yes
Aperture Size : 64MB

LPC Hub Controller 1
Model : Intel Corporation 82801DB (ICH4) LPC Interface Bridge
ACPI PM Enabled : Yes
Random Number Generator Enabled : No
Random Number Generator Support : Yes

USB Controller 1
Model : Micro-Star International Co Ltd (MSI) 82801DB (ICH4) USB UHCI Controller #1
Version : 1.10
UHCI Interface : Yes
Channels : 2
Speed : 48MHz
Legacy Emulation Enabled : No

USB Controller 2
Model : Micro-Star International Co Ltd (MSI) 82801DB (ICH4) USB UHCI Controller #2
Version : 1.10
UHCI Interface : Yes
Channels : 2
Speed : 48MHz
Legacy Emulation Enabled : No

USB Controller 3
Model : Micro-Star International Co Ltd (MSI) 82801DB (ICH4) USB UHCI Controller #3
Version : 1.10
UHCI Interface : Yes
Channels : 2
Speed : 48MHz
Legacy Emulation Enabled : No

USB Controller 4
Model : Micro-Star International Co Ltd (MSI) 82801DB (ICH4) USB EHCI Controller
Version : 2.00
Spec : 1.00
EHCI Interface : Yes
Channels : 6
Legacy Emulation Enabled : No

FireWire/1394 Controller 1
Model : Micro-Star International Co Ltd (MSI) VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller
Version : 1.00
OHCI Interface : Yes
Enhanced 1394a Support : No
Channels : 64
Speed : 400MHz

System SMBus Controller 1
Model : Intel 801xx SMBus
Version : 0.02
Speed : 16kHz
.....


AIUTATEMI VI PREGO !!!
IN ALLEGATO VI SEGNALO COSA ESCE DA GESTIONE PERIFERICHE....(USB,LAN,AUDIO ECC.... )

[GARRY77]

Dimenticavo per windows XP

[marco987]

Questo dovrebbe essere il link dove scaricare i driver e il bios x la tua MB:
http://www.msi.com.tw/program/suppor...UID=366&kind=1
Fammi sapere se è quello giusto......ciao

[GARRY77]

non so' cosa dirti..sui driver c'e' scritto usb 2...ma io ho 1.1....bhu......tu che dici?

[marco987]

Ciao GARRY77
La foto della mobo corrisponde alla tua?
Per le USB per me hai le USB2 infatti se vai a vedere a questo link:
http://www.intel.com/design/chipsets/845g/298657.htm
il controller usb "82801DB (ICH4) USB UHCI Controller" che tu hai,
supporta le USB2 come e scritto in quel link. L'1.1 penso si riferisca alla versione del controller e non dell'USB. Spero che ti possa essere d'aiuto Ciao..........