Apache, 1 server, 2 siti e un solo ip pubblico

[cavalloplus]

Ciao a tutti

ho bisogno del vostro aiuto per favore... vi descrivo brevemente la situazione.

Ho un server red hat (una versione un po' datata a dire il vero) sul quale ho installato apache.

Inizialmente su questo server girava un solo sito (sito1.it) per cui ho registrato un dominio e l'ho fatto puntare a quell'ip e il tutto funzionava correttamente.
Poi ho aggiunto un nuovo sito e configurato l'apache con i virtual host in modo da pubblicare un nuovo sito (sito2.it).

ad oggi per poter navigare sul sito 2 vado all'indirizzo www.sito1.it/sito2/.... poi ho deciso di registare il secondo dominio (www.sito2.it) ma in fase di registrazione ho scoperto che quando registri un dominio non puoi farlo puntare ad un ip pubblico / qualcosa ma solo all'ip pubblico

Ad oggi mi trovo con www.sito1.it e www.sito2.it che mostrano la stessa pagina (www.sito1.it)

ora vorrei configurare l'apache in modo da fare un reindirizzamento automatico cioè:

vorrei che quando un utente digita www.sito2.it l'apache mostri la pagina visibile su www.sito1.it/sito2/

come posso fare?

mi potete aiutare per favore?

ciao e grazie

[ChristianX86]

quasi tutti i provider di domini offrono la opzione "pagina di cortesia" o "redirect URL" per far puntare sito2.it a sito1.it/sito2, io ho svariati domini fatti per clienti in questo modo..

[GByTe87]

Apache VirtualHost?

[Master FO]

Originariamente inviato da cavalloplus

Ciao a tutti

ho bisogno del vostro aiuto per favore... vi descrivo brevemente la situazione.

Ho un server red hat (una versione un po' datata a dire il vero) sul quale ho installato apache.

Inizialmente su questo server girava un solo sito (sito1.it) per cui ho registrato un dominio e l'ho fatto puntare a quell'ip e il tutto funzionava correttamente.
Poi ho aggiunto un nuovo sito e configurato l'apache con i virtual host in modo da pubblicare un nuovo sito (sito2.it).

ad oggi per poter navigare sul sito 2 vado all'indirizzo www.sito1.it/sito2/.... poi ho deciso di registare il secondo dominio (www.sito2.it) ma in fase di registrazione ho scoperto che quando registri un dominio non puoi farlo puntare ad un ip pubblico / qualcosa ma solo all'ip pubblico

Ad oggi mi trovo con www.sito1.it e www.sito2.it che mostrano la stessa pagina (www.sito1.it)

ora vorrei configurare l'apache in modo da fare un reindirizzamento automatico cioè:

vorrei che quando un utente digita www.sito2.it l'apache mostri la pagina visibile su www.sito1.it/sito2/

come posso fare?

mi potete aiutare per favore?

ciao e grazie

NameVirtualHost *:80

<VirtualHost *:80>
DocumentRoot "/usr/home/sito1"
ServerName www.sito1.it
<Directory "/usr/home/sito1">
allow from all
Options -Indexes
</Directory>
</VirtualHost>


<VirtualHost *:80>
DocumentRoot "/usr/home/sito1/sito2/"
ServerName www.sito2.it
<Directory "/usr/home/sito1/sito2/">
allow from all
Options -Indexes
</Directory>
</VirtualHost>

[cavalloplus]

Originariamente inviato da Master FO

NameVirtualHost *:80

<VirtualHost *:80>
DocumentRoot "/usr/home/sito1"
ServerName www.sito1.it
<Directory "/usr/home/sito1">
allow from all
Options -Indexes
</Directory>
</VirtualHost>


<VirtualHost *:80>
DocumentRoot "/usr/home/sito1/sito2/"
ServerName www.sito2.it
<Directory "/usr/home/sito1/sito2/">
allow from all
Options -Indexes
</Directory>
</VirtualHost>

grazie mille

uso questo codice così come è sostituendo solo il nome delle cartelle e del sito vero?

questa parte la lascio così come è?

<VirtualHost *:80>
...
....
allow from all
Options -Indexes
</Directory>
</VirtualHost>

[Master FO]

Originariamente inviato da cavalloplus

grazie mille

uso questo codice così come è sostituendo solo il nome delle cartelle e del sito vero?

questa parte la lascio così come è?

<VirtualHost *:80>
...
....
allow from all
Options -Indexes
</Directory>
</VirtualHost>

In genere sì, ma dipende da cosa ti serve.
Scritto così vuol dire che disabiliti il listing delle directory e che la directory è visibile a tutti. Se poi vuoi abilitare il file htaccess e relative istruzioni, ti servono altre direttive.

[Master FO]

Ad ogni modo, qui trovi tutto:

http://httpd.apache.org/docs/2.0/vhosts/
http://httpd.apache.org/docs/2.0/vhosts/examples.html

[Darecon]

Originariamente inviato da Master FO

NameVirtualHost *:80

<VirtualHost *:80>
DocumentRoot "/usr/home/sito1"
ServerName www.sito1.it
<Directory "/usr/home/sito1">
allow from all
Options -Indexes
</Directory>
</VirtualHost>


<VirtualHost *:80>
DocumentRoot "/usr/home/sito1/sito2/"
ServerName www.sito2.it
<Directory "/usr/home/sito1/sito2/">
allow from all
Options -Indexes
</Directory>
</VirtualHost>

Non ho provato, ma cosi' facendo quando digiti www.sito2.it non riscrive l'url, puntando su www.sito1.it/sito2/, che e' la richiesta dell'utente, ma rimane www.sito2.it.. Sbaglio? Sono nabbo con apache quindi perdonami.. Non ci vuole un url rewriting?

Uhm, ho riletto, forse ho capito male io..

[Master FO]

Originariamente inviato da Darecon

Non ho provato, ma cosi' facendo quando digiti www.sito2.it non riscrive l'url, puntando su www.sito1.it/sito2/, che e' la richiesta dell'utente, ma rimane www.sito2.it.. Sbaglio? Sono nabbo con apache quindi perdonami.. Non ci vuole un url rewriting?

Uhm, ho riletto, forse ho capito male io..

Così và a www.sito2.it che punta a /usr/home/sito1/sito2/

Se poi l'utente vuole che si veda questo percorso, si può fare un banale redirect, anche se non ne vedo l'utilità...

[cavalloplus]

ciao a tutti

purtroppo inserendo questi comandi nel file httpd.conf non ho risolto nulla...
quando faccio www.sito2.it mi mostra ancora www.sito1.it

secondo voi come mai?

ciao e grazie

[Master FO]

Originariamente inviato da cavalloplus

ciao a tutti

purtroppo inserendo questi comandi nel file httpd.conf non ho risolto nulla...
quando faccio www.sito2.it mi mostra ancora www.sito1.it

secondo voi come mai?

ciao e grazie

Hai messo questo?

NameVirtualHost *:80

Se non lo metti, apache considera solo il primo vhost.

[cavalloplus]

Originariamente inviato da Master FO

Hai messo questo?

NameVirtualHost *:80

Se non lo metti, apache considera solo il primo vhost.

si si l'ho messo.....

[Master FO]

Allora non lo sò...
Prova a postare il tuo httpd.conf

[cavalloplus]

con un po' di ritardo ma ci sono grazie per l'aiuto

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/logs/foo.log"
# with ServerRoot set to "/usr/local/apache2.0.55" will be interpreted by the
# server as "/usr/local/apache2.0.55//var/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/usr/local/apache2.0.55"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_winnt.c>
<IfModule !mpm_netware.c>
#LockFile /var/logs/accept.lock
</IfModule>
</IfModule>

#
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_netware.c>
<IfModule !perchild.c>
#ScoreBoardFile /var/logs/apache_runtime_status
</IfModule>
</IfModule>


#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
<IfModule !mpm_netware.c>
PidFile /var/logs/httpd.pid
</IfModule>

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>

# perchild MPM
# NumServers: constant number of server processes
# StartThreads: initial number of worker threads in each server process
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# MaxThreadsPerChild: maximum number of worker threads in each server process
# MaxRequestsPerChild: maximum number of connections per server process
<IfModule perchild.c>
NumServers 5
StartThreads 5
MinSpareThreads 5
MaxSpareThreads 10
MaxThreadsPerChild 20
MaxRequestsPerChild 0
</IfModule>

# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>

# BeOS MPM
# StartThreads: how many threads do we initially spawn?
# MaxClients: max number of threads we can have (1 thread == 1 client)
# MaxRequestsPerThread: maximum number of requests each thread will process
<IfModule beos.c>
StartThreads 10
MaxClients 50
MaxRequestsPerThread 10000
</IfModule>

# NetWare MPM
# ThreadStackSize: Stack size allocated for each worker thread
# StartThreads: Number of worker threads launched at server startup
# MinSpareThreads: Minimum number of idle threads, to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# MaxThreads: Maximum number of worker threads alive at the same time
# MaxRequestsPerChild: Maximum number of requests a thread serves. It is
# recommended that the default value of 0 be set for this
# directive on NetWare. This will allow the thread to
# continue to service requests indefinitely.
<IfModule mpm_netware.c>
ThreadStackSize 65536
StartThreads 250
MinSpareThreads 25
MaxSpareThreads 250
MaxThreads 1000
MaxRequestsPerChild 0
MaxMemFree 100
</IfModule>

# OS/2 MPM
# StartServers: Number of server processes to maintain
# MinSpareThreads: Minimum number of idle threads per process,
# to handle request spikes
# MaxSpareThreads: Maximum number of idle threads per process
# MaxRequestsPerChild: Maximum number of connections per server process
<IfModule mpmt_os2.c>
StartServers 2
MinSpareThreads 5
MaxSpareThreads 10
MaxRequestsPerChild 0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80

Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#

##### Tomcat Connector

LoadModule jk_module /usr/local/apache2.0.55/modules/mod_jk.so

JkWorkersFile /usr/local/apache2.0.55/conf/workers.properties
JkLogFile /var/logs/jk_log
JkLogLevel debug
JkMount /Sito1/* ajp13

JkMount /Sito2/* ajp13

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

<IfModule !mpm_winnt.c>
<IfModule !mpm_netware.c>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
#
User nobody
Group #-1
</IfModule>
</IfModule>

[cavalloplus]

con un po' di ritardo ma ci sono grazie per l'aiuto

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/logs/foo.log"
# with ServerRoot set to "/usr/local/apache2.0.55" will be interpreted by the
# server as "/usr/local/apache2.0.55//var/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/usr/local/apache2.0.55"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_winnt.c>
<IfModule !mpm_netware.c>
#LockFile /var/logs/accept.lock
</IfModule>
</IfModule>

#
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_netware.c>
<IfModule !perchild.c>
#ScoreBoardFile /var/logs/apache_runtime_status
</IfModule>
</IfModule>


#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
<IfModule !mpm_netware.c>
PidFile /var/logs/httpd.pid
</IfModule>

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>

# perchild MPM
# NumServers: constant number of server processes
# StartThreads: initial number of worker threads in each server process
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# MaxThreadsPerChild: maximum number of worker threads in each server process
# MaxRequestsPerChild: maximum number of connections per server process
<IfModule perchild.c>
NumServers 5
StartThreads 5
MinSpareThreads 5
MaxSpareThreads 10
MaxThreadsPerChild 20
MaxRequestsPerChild 0
</IfModule>

# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>

# BeOS MPM
# StartThreads: how many threads do we initially spawn?
# MaxClients: max number of threads we can have (1 thread == 1 client)
# MaxRequestsPerThread: maximum number of requests each thread will process
<IfModule beos.c>
StartThreads 10
MaxClients 50
MaxRequestsPerThread 10000
</IfModule>

# NetWare MPM
# ThreadStackSize: Stack size allocated for each worker thread
# StartThreads: Number of worker threads launched at server startup
# MinSpareThreads: Minimum number of idle threads, to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# MaxThreads: Maximum number of worker threads alive at the same time
# MaxRequestsPerChild: Maximum number of requests a thread serves. It is
# recommended that the default value of 0 be set for this
# directive on NetWare. This will allow the thread to
# continue to service requests indefinitely.
<IfModule mpm_netware.c>
ThreadStackSize 65536
StartThreads 250
MinSpareThreads 25
MaxSpareThreads 250
MaxThreads 1000
MaxRequestsPerChild 0
MaxMemFree 100
</IfModule>

# OS/2 MPM
# StartServers: Number of server processes to maintain
# MinSpareThreads: Minimum number of idle threads per process,
# to handle request spikes
# MaxSpareThreads: Maximum number of idle threads per process
# MaxRequestsPerChild: Maximum number of connections per server process
<IfModule mpmt_os2.c>
StartServers 2
MinSpareThreads 5
MaxSpareThreads 10
MaxRequestsPerChild 0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80

Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#

##### Tomcat Connector

LoadModule jk_module /usr/local/apache2.0.55/modules/mod_jk.so

JkWorkersFile /usr/local/apache2.0.55/conf/workers.properties
JkLogFile /var/logs/jk_log
JkLogLevel debug
JkMount /Sito1/* ajp13

JkMount /Sito2/* ajp13

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

<IfModule !mpm_winnt.c>
<IfModule !mpm_netware.c>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
#
User nobody
Group #-1
</IfModule>
</IfModule>

[Master FO]

Manca la parte in cui definisci i virtual host

[cavalloplus]

non mi carica nulla questa mattina... nè allegati neè testo...
speriamo che questo allegato si veda adesso