pancu
28-01-2005, 13:58
Ho appena installa eciadsl-usermode-0.10.Ho un modem Ericsson hm120dp, la connessione sembra andare a buon fine, ma quando faccio il ping ad un ip non ottengo risposte.
Posto il codice:
[EciAdsl 1/5] Setting up USB support...
Preliminary USB device filesystem is OK
Loading UHCI support... Warning: uhci-hcd module doesn't exist
[EciAdsl 2/5] Uploading firmware...
GlobeSpan USB ADSL WAN Modem compatible modem found (in 2094ms)
eciadsl-firmware: success
firmware loaded successfully
[EciAdsl 3/5] Synchronization...
...
eciadsl-synch: success
Synchronization successful
[EciAdsl 4/5] Connecting to provider...
nice: `--20' option is obsolete; use `-n -20' since this will be removed in the future
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [LCP ConfReq id=0x1 <magic 0x79747f2>]
sent [LCP ConfReq id=0x1 <magic 0x79747f2>]
rcvd [LCP ConfReq id=0x1 <auth pap> <magic 0x896d3405>]
sent [LCP ConfAck id=0x1 <auth pap> <magic 0x896d3405>]
sent [LCP ConfReq id=0x1 <magic 0x79747f2>]
rcvd [LCP ConfAck id=0x1 <magic 0x79747f2>]
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [PAP AuthReq id=0x1 user="[email protected]" password=<hidden>]
rcvd [PAP AuthAck id=0x1 ""]
PAP authentication succeeded
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x1 <addr 192.168.100.1>]
sent [IPCP ConfAck id=0x1 <addr 192.168.100.1>]
rcvd [LCP EchoReq id=0x1 magic=0x896d3405 34 05 00 00]
sent [LCP EchoRep id=0x1 magic=0x79747f2 00 00 00 00]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x1 <addr 82.57.181.142> <ms-dns1 80.17.209.204> <ms-dns3 151.99.125.1>]
sent [IPCP ConfReq id=0x2 <addr 82.57.181.142> <ms-dns1 80.17.209.204> <ms-dns3 151.99.125.1>]
rcvd [IPCP ConfAck id=0x2 <addr 82.57.181.142> <ms-dns1 80.17.209.204> <ms-dns3 151.99.125.1>]
local IP address 82.57.181.142
remote IP address 192.168.100.1
primary DNS address 80.17.209.204
secondary DNS address 151.99.125.1
Connection successful
[EciAdsl 5/5] Setting up route table...
Waiting for ppp0...
Adding default route... default route to ppp0 already exists
Ho poi esegui route -n e questo è cio che mi viene visualizzato:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.100.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
0.0.0.0 192.168.100.1 0.0.0.0 UG 0 0 0 ppp0
Che posso fare??
Grazie!
Posto il codice:
[EciAdsl 1/5] Setting up USB support...
Preliminary USB device filesystem is OK
Loading UHCI support... Warning: uhci-hcd module doesn't exist
[EciAdsl 2/5] Uploading firmware...
GlobeSpan USB ADSL WAN Modem compatible modem found (in 2094ms)
eciadsl-firmware: success
firmware loaded successfully
[EciAdsl 3/5] Synchronization...
...
eciadsl-synch: success
Synchronization successful
[EciAdsl 4/5] Connecting to provider...
nice: `--20' option is obsolete; use `-n -20' since this will be removed in the future
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [LCP ConfReq id=0x1 <magic 0x79747f2>]
sent [LCP ConfReq id=0x1 <magic 0x79747f2>]
rcvd [LCP ConfReq id=0x1 <auth pap> <magic 0x896d3405>]
sent [LCP ConfAck id=0x1 <auth pap> <magic 0x896d3405>]
sent [LCP ConfReq id=0x1 <magic 0x79747f2>]
rcvd [LCP ConfAck id=0x1 <magic 0x79747f2>]
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [PAP AuthReq id=0x1 user="[email protected]" password=<hidden>]
rcvd [PAP AuthAck id=0x1 ""]
PAP authentication succeeded
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x1 <addr 192.168.100.1>]
sent [IPCP ConfAck id=0x1 <addr 192.168.100.1>]
rcvd [LCP EchoReq id=0x1 magic=0x896d3405 34 05 00 00]
sent [LCP EchoRep id=0x1 magic=0x79747f2 00 00 00 00]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x1 <addr 82.57.181.142> <ms-dns1 80.17.209.204> <ms-dns3 151.99.125.1>]
sent [IPCP ConfReq id=0x2 <addr 82.57.181.142> <ms-dns1 80.17.209.204> <ms-dns3 151.99.125.1>]
rcvd [IPCP ConfAck id=0x2 <addr 82.57.181.142> <ms-dns1 80.17.209.204> <ms-dns3 151.99.125.1>]
local IP address 82.57.181.142
remote IP address 192.168.100.1
primary DNS address 80.17.209.204
secondary DNS address 151.99.125.1
Connection successful
[EciAdsl 5/5] Setting up route table...
Waiting for ppp0...
Adding default route... default route to ppp0 already exists
Ho poi esegui route -n e questo è cio che mi viene visualizzato:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.100.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
0.0.0.0 192.168.100.1 0.0.0.0 UG 0 0 0 ppp0
Che posso fare??
Grazie!