supermarchino
01-11-2004, 14:43
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "ATA:1,0,0" gracetime=2 fs=1914k -v -useinfo speed=3 -dao -pad -immed -data "/home/marco/Desktop/warty-release-live-i386.iso" ...
scsidev: 'ATA:1,0,0'
devname: 'ATA'
scsibus: 1 target: 0 lun: 0
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.81 04/04/18 Copyright 1997 J. Schilling').
Cdrecord-Clone 2.01a28-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
SCSI buffer size: 64512
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-R2102'
Revision : '1015'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1312768 = 1282 KB
FIFO size : 1959936 = 1914 KB
pregap1: -1
Track 01: data 642 MB padsize: 30 KB
Total size: 738 MB (73:09.21) = 329191 sectors
Lout start: 738 MB (73:11/16) = 329191 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 0
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 337350 (75:00/00)
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 337350 Blocks remaining: 8159
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
trackno=0
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 0C 1C 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.000s timeout 200s
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
cdrecord: fifo had 129 puts and 101 gets.
write track data: error after 6348800 bytes
cdrecord: fifo was 0 times empty and 58 times full, min fill was 86%.
Writing time: 15.459s
scsidev: 'ATA:1,0,0'
devname: 'ATA'
scsibus: 1 target: 0 lun: 0
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.81 04/04/18 Copyright 1997 J. Schilling').
Cdrecord-Clone 2.01a28-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
SCSI buffer size: 64512
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-R2102'
Revision : '1015'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1312768 = 1282 KB
FIFO size : 1959936 = 1914 KB
pregap1: -1
Track 01: data 642 MB padsize: 30 KB
Total size: 738 MB (73:09.21) = 329191 sectors
Lout start: 738 MB (73:11/16) = 329191 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 0
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 337350 (75:00/00)
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 337350 Blocks remaining: 8159
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
trackno=0
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 0C 1C 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.000s timeout 200s
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
cdrecord: fifo had 129 puts and 101 gets.
write track data: error after 6348800 bytes
cdrecord: fifo was 0 times empty and 58 times full, min fill was 86%.
Writing time: 15.459s