cocotimbo
05-02-2004, 16:57
Ho aggiornato il firmware del mio Lite-On 48x12x48 (LTR 48125W) e Nero ha smesso di fungere... Non riesce a finire il Lead in o a eseguire il fine traccia. A volte si pianta perché non mi chiude i CD (fallisce il Lead out). Non so più cosa fare... :cry:
All'inizio sembrava fossero i driver IDE, poi quando li ho disinstallati e rimesso quelli di Windows (uso xp pro) tutto pareva andare "abbastanza" bene. Ora dopo aver aggiornato il firmware all'ultima versione, VS0D, me li spu***na tutti.
Qualche suggerimento?
Tra l'altro sembra che il controller creda che il masterizzatore sia SCSI.
Questo è il log di una masterizzazione fallita:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\WinUtils\Masterizza\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19.18.06
Nero version: 6.3.0.2
Recorder: <LITE-ON LTR-48125W> Version: VS0D - HA 1 TA 1 - 6.3.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-ROM DVD-105 >Version: 1.11 - HA 1 TA 0 - 6.3.0.2
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IBM-DTLA-307045 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-105 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-48125W atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-ROM DVD-105 I: CDRom0
LITE-ON LTR-48125W J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 263MB (269316kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.1.2004
CD-ROM (ISO)
1.29.55 #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1.29.55 #2 Phase 90 File dlgbrnst.cpp, Line 1800
Buffer Underrun Protection activated
1.29.55 #3 Text 0 File Reader.cpp, Line 118
Reader running
1.29.55 #4 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-48125W running
1.29.55 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
1.29.55 #6 Text 0 File Burncd.cpp, Line 3101
Turn on Track-at-once, using CD-R/RW media
1.29.56 #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 52323 ( 11:39.48)
1.29.56 #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
1.29.57 #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: LITE-ON LTR-48125W;
CDR code: 00 97 28 26; OSJ entry from: Multi Media Masters && Machinary SA
ATIP Data:
Special Info [hex] 1: E0 00 A0, 2: 61 1C 1A (LI 97:28.26), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
1.29.57 #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1.29.57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 52324 (52324) = #52324/11:37.49
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 52322 blocks [LITE-ON LTR-48125W ]
--------------------------------------------------------------
1.29.57 #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [LITE-ON LTR-48125W ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 107466752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
52324 | lead-out | 1 | 0x00 | 0x41
1.29.57 #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
Removed 2 run-out blocks from end of track 1. Length: 52324 -> 52322.
1.29.57 #14 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started
1.29.57 #15 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
1.29.57 #16 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed
1.29.57 #17 Phase 28 File dlgbrnst.cpp, Line 1800
Speed measurement started
1.29.58 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1.30.04 #19 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1.30.04 #20 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
1.30.04 #21 Phase 29 File dlgbrnst.cpp, Line 1751
Speed measurement completed: 234.9x (35.246 KB/s)
1.30.04 #22 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 16x (2.400 KB/s)
1.30.05 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1.30.05 #24 Text 0 File Mmc.cpp, Line 19451
Set BUFE: supported -> ON , SMART-BURN : ON
1.32.35 #25 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05250000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
1.32.35 #26 CDR -1135 File Writer.cpp, Line 301
Write error
1.32.35 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1.32.35 #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
1.32.35 #29 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
LITE-ON LTR-48125W\H1 T1
1.32.35 #30 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack
1.32.35 #31 Text 0 File Mmc.cpp, Line 14287
<LITE-ON LTR-48125W > start Close Session
1.32.35 #32 SCSI -1176 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
1.32.35 #33 CDR -1176 File WriterStatus.cpp, Line 245
Session fixation error
1.32.35 #34 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation
1.32.35 #35 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation
1.32.35 #36 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
1.32.35 #37 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 16x (2.400 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 27/08/2003 2.02.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 1.27.50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Scusatemi per la lunghezza del post ma non so più che fare...
Ciao
All'inizio sembrava fossero i driver IDE, poi quando li ho disinstallati e rimesso quelli di Windows (uso xp pro) tutto pareva andare "abbastanza" bene. Ora dopo aver aggiornato il firmware all'ultima versione, VS0D, me li spu***na tutti.
Qualche suggerimento?
Tra l'altro sembra che il controller creda che il masterizzatore sia SCSI.
Questo è il log di una masterizzazione fallita:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\WinUtils\Masterizza\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19.18.06
Nero version: 6.3.0.2
Recorder: <LITE-ON LTR-48125W> Version: VS0D - HA 1 TA 1 - 6.3.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-ROM DVD-105 >Version: 1.11 - HA 1 TA 0 - 6.3.0.2
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IBM-DTLA-307045 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-105 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-48125W atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-ROM DVD-105 I: CDRom0
LITE-ON LTR-48125W J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 263MB (269316kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.1.2004
CD-ROM (ISO)
1.29.55 #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1.29.55 #2 Phase 90 File dlgbrnst.cpp, Line 1800
Buffer Underrun Protection activated
1.29.55 #3 Text 0 File Reader.cpp, Line 118
Reader running
1.29.55 #4 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-48125W running
1.29.55 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
1.29.55 #6 Text 0 File Burncd.cpp, Line 3101
Turn on Track-at-once, using CD-R/RW media
1.29.56 #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 52323 ( 11:39.48)
1.29.56 #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
1.29.57 #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: LITE-ON LTR-48125W;
CDR code: 00 97 28 26; OSJ entry from: Multi Media Masters && Machinary SA
ATIP Data:
Special Info [hex] 1: E0 00 A0, 2: 61 1C 1A (LI 97:28.26), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
1.29.57 #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1.29.57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 52324 (52324) = #52324/11:37.49
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 52322 blocks [LITE-ON LTR-48125W ]
--------------------------------------------------------------
1.29.57 #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [LITE-ON LTR-48125W ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 107466752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
52324 | lead-out | 1 | 0x00 | 0x41
1.29.57 #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
Removed 2 run-out blocks from end of track 1. Length: 52324 -> 52322.
1.29.57 #14 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started
1.29.57 #15 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
1.29.57 #16 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed
1.29.57 #17 Phase 28 File dlgbrnst.cpp, Line 1800
Speed measurement started
1.29.58 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1.30.04 #19 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1.30.04 #20 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
1.30.04 #21 Phase 29 File dlgbrnst.cpp, Line 1751
Speed measurement completed: 234.9x (35.246 KB/s)
1.30.04 #22 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 16x (2.400 KB/s)
1.30.05 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1.30.05 #24 Text 0 File Mmc.cpp, Line 19451
Set BUFE: supported -> ON , SMART-BURN : ON
1.32.35 #25 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05250000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
1.32.35 #26 CDR -1135 File Writer.cpp, Line 301
Write error
1.32.35 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1.32.35 #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
1.32.35 #29 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
LITE-ON LTR-48125W\H1 T1
1.32.35 #30 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack
1.32.35 #31 Text 0 File Mmc.cpp, Line 14287
<LITE-ON LTR-48125W > start Close Session
1.32.35 #32 SCSI -1176 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
1.32.35 #33 CDR -1176 File WriterStatus.cpp, Line 245
Session fixation error
1.32.35 #34 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation
1.32.35 #35 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation
1.32.35 #36 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
1.32.35 #37 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 16x (2.400 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 27/08/2003 2.02.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 1.27.50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Scusatemi per la lunghezza del post ma non so più che fare...
Ciao