akiro
25-08-2012, 19:00
Ciao a tutti,
ho un HD Seagate Barracuda 7200.11 family (Device Model: ST3500320AS) e dagli attributi SMART ho una segnalazione riguardo lo Spin-up retry count, non ancora un warning (ma l'atributo è in rosso) ma si dice che potrebbe essere l'inizio di un problema hardware.
Ho eseguito un test completo, e questo è l'output:
smartctl 5.39.1 2010-01-28 r3054 [x86_64-mandriva-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11 family
Device Model: ST3500320AS
Serial Number: 9QMAPPH0
Firmware Version: SD1A
User Capacity: 500,107,862,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Aug 25 19:41:06 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 642) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 119) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 112 096 006 Pre-fail Always - 202337875
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2059
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 186104690
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8023
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 2
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2059
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 090 000 Old_age Always - 446684796351
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 062 056 045 Old_age Always - 38 (Lifetime Min/Max 29/39)
194 Temperature_Celsius 0x0022 038 044 000 Old_age Always - 38 (0 16 0 0)
195 Hardware_ECC_Recovered 0x001a 047 033 000 Old_age Always - 202337875
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 8023 -
# 2 Short offline Completed without error 00% 8022 -
# 3 Conveyance offline Completed without error 00% 8022 -
# 4 Extended offline Interrupted (host reset) 00% 7908 -
# 5 Extended offline Interrupted (host reset) 00% 7769 -
# 6 Extended offline Interrupted (host reset) 00% 7739 -
# 7 Extended offline Interrupted (host reset) 00% 7703 -
# 8 Extended offline Interrupted (host reset) 00% 7130 -
# 9 Extended offline Interrupted (host reset) 00% 7087 -
#10 Extended offline Interrupted (host reset) 00% 7046 -
#11 Extended offline Interrupted (host reset) 00% 6957 -
#12 Extended offline Interrupted (host reset) 00% 6892 -
#13 Extended offline Completed without error 00% 6723 -
#14 Extended offline Completed without error 00% 6620 -
#15 Extended offline Interrupted (host reset) 00% 6470 -
#16 Extended offline Interrupted (host reset) 00% 6338 -
#17 Extended offline Interrupted (host reset) 00% 6231 -
#18 Extended offline Interrupted (host reset) 00% 6153 -
#19 Extended offline Interrupted (host reset) 00% 6089 -
#20 Extended offline Interrupted (host reset) 00% 5996 -
#21 Short offline Completed without error 00% 839 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Mi devo preoccupare?
Grazie a tutti.
ho un HD Seagate Barracuda 7200.11 family (Device Model: ST3500320AS) e dagli attributi SMART ho una segnalazione riguardo lo Spin-up retry count, non ancora un warning (ma l'atributo è in rosso) ma si dice che potrebbe essere l'inizio di un problema hardware.
Ho eseguito un test completo, e questo è l'output:
smartctl 5.39.1 2010-01-28 r3054 [x86_64-mandriva-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11 family
Device Model: ST3500320AS
Serial Number: 9QMAPPH0
Firmware Version: SD1A
User Capacity: 500,107,862,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Aug 25 19:41:06 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 642) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 119) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 112 096 006 Pre-fail Always - 202337875
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2059
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 186104690
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8023
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 2
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2059
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 090 000 Old_age Always - 446684796351
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 062 056 045 Old_age Always - 38 (Lifetime Min/Max 29/39)
194 Temperature_Celsius 0x0022 038 044 000 Old_age Always - 38 (0 16 0 0)
195 Hardware_ECC_Recovered 0x001a 047 033 000 Old_age Always - 202337875
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 8023 -
# 2 Short offline Completed without error 00% 8022 -
# 3 Conveyance offline Completed without error 00% 8022 -
# 4 Extended offline Interrupted (host reset) 00% 7908 -
# 5 Extended offline Interrupted (host reset) 00% 7769 -
# 6 Extended offline Interrupted (host reset) 00% 7739 -
# 7 Extended offline Interrupted (host reset) 00% 7703 -
# 8 Extended offline Interrupted (host reset) 00% 7130 -
# 9 Extended offline Interrupted (host reset) 00% 7087 -
#10 Extended offline Interrupted (host reset) 00% 7046 -
#11 Extended offline Interrupted (host reset) 00% 6957 -
#12 Extended offline Interrupted (host reset) 00% 6892 -
#13 Extended offline Completed without error 00% 6723 -
#14 Extended offline Completed without error 00% 6620 -
#15 Extended offline Interrupted (host reset) 00% 6470 -
#16 Extended offline Interrupted (host reset) 00% 6338 -
#17 Extended offline Interrupted (host reset) 00% 6231 -
#18 Extended offline Interrupted (host reset) 00% 6153 -
#19 Extended offline Interrupted (host reset) 00% 6089 -
#20 Extended offline Interrupted (host reset) 00% 5996 -
#21 Short offline Completed without error 00% 839 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Mi devo preoccupare?
Grazie a tutti.