PDA

View Full Version : Gigabyte GA-Z68X (P)-UD3 (H) -B3


Carciofone
10-12-2011, 07:58
Gigabyte GA-Z68X-UD3H-B3 (Rev. 1.3)

http://img809.imageshack.us/img809/4472/4963.jpg

http://img824.imageshack.us/img824/218/connettoris.jpg


http://img444.imageshack.us/img444/7528/2278o.jpg http://img192.imageshack.us/img192/6947/2218j.jpg http://img442.imageshack.us/img442/3007/1959k.jpg http://img850.imageshack.us/img850/1479/1957a.jpg
http://img190.imageshack.us/img190/1692/1831e.jpg http://img822.imageshack.us/img822/4941/1830.jpg http://img189.imageshack.us/img189/5421/621lm.jpg

http://img52.imageshack.us/img52/5551/1799n.jpg http://img59.imageshack.us/img59/8457/1802q.jpg http://img141.imageshack.us/img141/201/1801.jpg


Specifiche tecniche:

CPU
Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1155 package
L3 cache varies with CPU

Chipset
Intel® Z68 Express Chipset

Memory
4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
Dual channel memory architecture
Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
Support for non-ECC memory modules
Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics Integrated Graphics Processor:
1 x D-Sub port
1 x DVI-D port, supporting a maximum resolution of 1920x1200
* The DVI-D port does not support D-Sub connection by adapter.
1 x HDMI port, supporting a maximum resolution of 1920x1200
1 x DisplayPort, supporting a maximum resolution of 2560x1600p

Audio
Realtek ALC889 codec
High Definition Audio
2/4/5.1/7.1-channel
Support for Dolby® Home Theater
Support for S/PDIF Out

LAN
1 x Realtek RTL8111E chip (10/100/1000 Mbit)

Expansion Slots
1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
1 x PCI Express x16 slot, running at x8 (PCIEX8)
* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated with a PCI Express graphics card, the PCIEX16 slot will operate at up to x8 mode.

(All PCI Express x16 slots conform to PCI Express 3.0 standard.)
* To support PCI Express 3.0, you must install an Intel 22nm CPU.

3 x PCI Express x1 slots
(All PCI Express slots conform to PCI Express 2.0 standard.)
2 x PCI slots

Multi-Graphics Technology
Support for ATI CrossFireX™/NVIDIA SLI technology
* The PCIEX16 slot operates at up to x8 mode when ATI CrossFireX™/NVIDIA SLI is enabled.

Storage Interface Chipset:
2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
3 x SATA 3Gb/s connectors (SATA2_2~SATA2_4) supporting up to 3 SATA 3Gb/s devices
1 x eSATA 3Gb/s connector on the back panel supporting up to 1 SATA 3Gb/s device
Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

Marvell 88SE9172 chip:
2 x SATA 6Gb/s connectors (GSATA3_5, GSATA3_6) supporting up to 2 SATA 6Gb/s devices
Support for SATA RAID 0 and RAID 1

USB Chipset:
Up to 12 USB 2.0/1.1 ports (4 on the back panel, 8 via the USB brackets connected to the internal USB headers)

2 x Etron EJ168 chips:
Up to 4 USB 3.0/2.0 ports (2 on the back panel, 2 via the USB bracket connected to the internal USB header)

IEEE 1394 VIA VT6308 chip:
Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)

Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
4 x SATA 6Gb/s connectors
3 x SATA 3Gb/s connectors
1 x CPU fan header
2 x system fan headers
1 x power fan header
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
4 x USB 2.0/1.1 headers
1 x USB 3.0/2.0 header
1 x IEEE 1394a header
1 x serial port header
1 x Trusted Platform Module (TPM) header
1 x clearing CMOS jumper

Back Panel Connectors
1 x PS/2 keyboard/mouse port
1 x D-Sub port
1 x DVI-D port
1 x optical S/PDIF Out connector
1 x HDMI port
1 x DisplayPort
4 x USB 2.0/1.1 ports
1 x IEEE 1394a port
1 x eSATA 3Gb/s connector
2 x USB 3.0/2.0 ports
1 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)

I/O Controller
iTE IT8728 chip

H/W Monitoring
System voltage detection
CPU/System temperature detection
CPU/System/Power fan speed detection
CPU overheating warning
CPU/System/Power fan fail warning
CPU/System fan speed control
*Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.

BIOS
2 x 32 Mbit flash
Use of licensed AWARD BIOS
Support for DualBIOS™
PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features
Support for @BIOS
Support for Q-Flash
Support for Xpress BIOS Rescue
Support for Download Center
Support for Xpress Install
Support for Xpress Recovery2
Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
Support for Dynamic Energy Saver™ 2
Support for Smart 6™
Support for Auto Green
Support for eXtreme Hard Drive (X.H.D)
Support for ON/OFF Charge
Support for Cloud OC
Support for Q-Share

Driver:

Repository driver Gigabyte completo: Download (http://www.gigabyte.com/products/product-page.aspx?pid=3973#dl)
Driver Realtek Audio 7.1 e Gigabit Ethernet: Download (http://www.realtek.com/downloads/)
Driver più aggiornati Intel chipset, grafica, storage: Download (http://downloadcenter.intel.com/default.aspx?lang=ita&iid=subhdr-IT+dnlds_drivers)
Driver Etron EJ168 USB 3.0 più aggiornati: Download (http://www.x-drivers.com/catalog/drivers/usb_2.0_controllers/companies/etron/models/index.html)

RECENSIONI SATA III 6GBit e USB 3.0 (fonte (http://www.hwupgrade.it/forum/showpost.php?p=30225370&postcount=4))

Review del WD Caviar Black 1TB a interfaccia sata6g:
http://www.pcper.com/article.php?aid=870&type=expert&pid=1

Review del RAID0 su controller marvell sata6g usando una gigabyte UD4P
http://www.tweaktown.com/articles/3122/gigabyte_sata_6g_update_raid_0_just_how_we_like_it/index.html

Qui alcune review che trattando dell'argomento dell'implementazione SATA6g tra Asus e Gigabyte:
http://www.tweaktown.com/articles/3079/sata_6gbps_implementation_investigated_asus_vs_gigabyte_p55/index.html

Qui invece alcune recensioni preliminari di un prototipo di SSD Sata6g marvell utilizzando l'omonimo controller ora montato sulle Gigabyte P55A o Asus p7p55D-E
http://xtreview.com/addcomment-id-10877-view-SATA-6-Gbit-SSD-benchmark.html
http://www.pcper.com/article.php?aid=832
http://www.bit-tech.net/news/hardware/2009/12/14/sata-6gbps-ssd-shows-speed-gains/1

Uno stralcio di un'altra recensione di Anandtech, sempre con Crucial SSD (poi però rovinatosi), interessante il confronto tra marvell a piena banda/banda dimezzata, Intel sata2.0 "normale" e il nuovo sata6G nativo sull'AMD 890:
http://www.anandtech.com/storage/showdoc.aspx?i=3778&p=5

Il marvell per funzionare al meglio deve ovviamente lavorare in modalità turbo e ha qualche problemino a gestirsi i random write.. però nell'uso reale è molto vicino alla soluzione nativa di AMD e la banda è sfruttata comunque meglio di un sata2.0.

Nuovo articolo su crucial SSD 256GB.. impressionante :D
http://www.legitreviews.com/article/1174/1/ con video relativo http://www.youtube.com/watch?v=hVMWL0R8xcA
http://www.tweaktown.com/reviews/3118/crucial_realssd_c300_256gb_sata_6gbps_solid_state_disk/index.html

Altra recensione di crucial c300.. 4 c300 in raid0! 1320mb/s di lettura O_O
http://www.tweaktown.com/articles/3662/putting_sata_3_0_to_work_with_areca_arc_1880i_and_crucial_c300_256gb_ssds/index.html

Qui invece alcune recensioni di prova di periferiche USB 3.0, la prima proprio di HWU:
http://www.hwupgrade.it/articoli/storage/2319/disco-esterno-buffalo-1tb-usb-30-alla-prova-dei-fatti_index.html
http://www.tweaktown.com/reviews/3037/buffalo_drivestation_hd_hxu3_usb_3_0_external_hard_disk/index.html
http://www.youtube.com/watch?v=_GTORxdmiRY
http://www.youtube.com/watch?v=yC7WDwKcm8Y (supertalent nand Flash Usb 3.0 raid0.. 300mb in lettura)

Carciofone
10-12-2011, 08:56
...

ulk
11-12-2011, 11:43
Mi arriva la scheda lunedi, ma di quella marea di programmi a parte aggiornare bios e chipset vari per l'SO, conviene mettere roba tipo quella in lista...

http://it.gigabyte.com/products/page/mb/ga-z68x-ud3h-b3rev_10/download/utility

ulk
11-12-2011, 23:16
Si vabbe ho capito, devo averla comprata solo io e forse l'autore del thread.

Mi arrangio.:sofico:

Carciofone
12-12-2011, 05:47
Ha, ha, ha, non disperare, a me deve ancora arrivare.
Il Thread l'ho aperto sabato!
TouchBios mi pare un'utility molto interessante per accedere al bios direttamente da Windows in modo semplice e veloce senza doverlo fare al boot. Nei video di presentazione fanno vedere come si risolve il classico problema del passaggio da un'installazione in modalità Legacy ad una AHCI o RAID grazie a questa utility in modo semplice. Anche per OC è molto utile.
Lucidlogix VIRTU ovviamente è da provare se installi anche una scheda video discreta. In alcune recensioni descrivono questa scheda come la migliore mainstream di seconda generazione per risparmio energetico in idle e carico, anzi, testualmente, la prima che hanno provato con chipset Z68 in grado di andare in stato di idle profondo come previsto dalle specifiche Intel senza alcun tipo di problema.

By the way, I can’t help mentioning that GigabyteGA-Z68X-UD3H-B3 is the first Gigabyte mainboard we tested so far that by default allows the processor to go into deep power-saving modes that is why its power consumption doesn’t differ too much from that of other manufacturers’ products, when the CPU is idling. Moreover, this ensures that Intel Turbo Boost technology works to the utmost of its capacity, just like Intel had planned for their processors, that is why the performance of the system based on this particular mainboard will be good in any operational mode and under any type of operational load. As a result, GigabyteGA-Z68X-UD3H-B3 will be a good choice for very different user groups.

On/Off Charge la installi se usi il pc come caricabatterie per dispositivi usb anche da spento.
@Bios serve per aggiornare il bios da windows e io la metterei.
Le altre utility di smart-qualcosa vanno verificate a seconda della configurazione che hai, se ci sono SSD etc. Con dischi normali non so se vale la pena di metterle tutte.

P.S.: anche a me comunque, arriverà sta settimana e non l'ho ancora vista.
Ti posto questa prova: http://www.xbitlabs.com/articles/mainboards/display/gigabyte-ga-z68x-ud3h-b3_2.html#sect0
http://www.hardwaresecrets.com/article/Gigabyte-Z68X-UD3H-B3-Motherboard/1290/9
http://www.youtube.com/watch?v=AzKg-JDuy6g

ulk
12-12-2011, 07:58
Ha, ha, ha, non disperare, a me deve ancora arrivare.
Il Thread l'ho aperto sabato!
TouchBios mi pare un'utility molto interessante per accedere al bios direttamente da Windows in modo semplice e veloce senza doverlo fare al boot. Nei video di presentazione fanno vedere come si risolve il classico problema del passaggio da un'installazione in modalità Legacy ad una AHCI o RAID grazie a questa utility in modo semplice. Anche per OC è molto utile.
Lucidlogix VIRTU ovviamente è da provare se installi anche una scheda video discreta. In alcune recensioni descrivono questa scheda come la migliore mainstream di seconda generazione per risparmio energetico in idle e carico, anzi, testualmente, la prima che hanno provato con chipset Z68 in grado di andare in stato di idle profondo come previsto dalle specifiche Intel senza alcun tipo di problema.



On/Off Charge la installi se usi il pc come caricabatterie per dispositivi usb anche da spento.
@Bios serve per aggiornare il bios da windows e io la metterei.
Le altre utility di smart-qualcosa vanno verificate a seconda della configurazione che hai, se ci sono SSD etc. Con dischi normali non so se vale la pena di metterle tutte.

P.S.: anche a me comunque, arriverà sta settimana e non l'ho ancora vista.
Ti posto questa prova: http://www.xbitlabs.com/articles/mainboards/display/gigabyte-ga-z68x-ud3h-b3_2.html#sect0
http://www.hardwaresecrets.com/article/Gigabyte-Z68X-UD3H-B3-Motherboard/1290/9
http://www.youtube.com/watch?v=AzKg-JDuy6g

Si, si scherzavo, il discorso del risparmio energetico mi interessa ma so che Gigabyte e avanti da anni ad esempio sui proci è quella chon le schede più downltabili quindi ottimo.

Carciofone
15-12-2011, 06:41
Nuovo Bios F11F.

Changelog:
Beta BIOS
Improve IRST+MARVELL RAID compatibility

ulk
15-12-2011, 12:23
Nuovo Bios F11F.

Changelog:
Beta BIOS
Improve IRST+MARVELL RAID compatibility


Ho dovutop togliere l'hD di dati da questo controller adesso uso solo chipset intel, spero sia questo che mi corrompeva il disco dell'SO

Carciofone
17-12-2011, 06:07
Installata la scheda e operativa.
Adesso devo capire come mai le memorie a 1600 funzionano a 1333 di default... e il chip spd non viene rispettato.
Il bios non l'ho ancora aggiornato.
Anche a me un'unità ottica non è vista e stamattina lo riapro per verificare la cavetteria e le connessioni che non si siano mosse.
Come hai disposto gli hd sui connettori?
Mi pareva di aver letto da qualche parte che sul marvell non si potevano installare unità ottiche.

ulk
17-12-2011, 08:25
Installata la scheda e operativa.
Adesso devo capire come mai le memorie a 1600 funzionano a 1333 di default... e il chip spd non viene rispettato.
Il bios non l'ho ancora aggiornato.
Anche a me un'unità ottica non è vista e stamattina lo riapro per verificare la cavetteria e le connessioni che non si siano mosse.
Come hai disposto gli hd sui connettori?
Mi pareva di aver letto da qualche parte che sul marvell non si potevano installare unità ottiche.

Ho tolto tutto su Marvel, sono solo su Intel

Carciofone
17-12-2011, 10:58
Sì mi sa che il marvell gestisce solo hd. Ho aggiornato all'ultimo bios e mi sembra vada bene. Ho anche cambiato il moltiplicatore della memoria e adesso va a 1600.

Carciofone
19-12-2011, 05:56
Nuovo driver per chipset Marvell 88SE91xx Serie Sata 6G Version 1.2.0.1014 (http://www.station-drivers.com/telechargement/marvell/sata/marvell_88se9xxx_1.2.0.1014(www.station-drivers.com).exe).

Nuovo driver per chipset Etron EJ168 (http://www.station-drivers.com/telechargement/etron/etron_usb3_107(www.station-drivers.com).exe).

Carciofone
08-01-2012, 18:13
Nuovo firmware beta F11G.

ulk
22-02-2012, 23:09
Bios Ufficiale F11

http://it.gigabyte.com/products/page/mb/ga-z68x-ud3h-b3rev_10/download/bios

bottoni
02-06-2012, 17:19
tra poco me ne arriverà una identica ...mi aggiungerò alla discussione ciao