PDA

View Full Version : [Thread ufficiale]Ati-open driver


Pagine : [1] 2 3

Slayer86
20-07-2009, 15:14
Ho pensato di aprire questo thread visto che i driver open ati, da quando AMD ha deciso di rendere open le specifiche delle sue schede, stanno migliorando con una velocità incredibile e a mio parere tra breve rappresenteranno la scielta migliore sotto ogni punto di vista per chi possiede una scheda ati!

Al momento attuale AMD con i suoi driver proprietari supporta le schede dalla famiglia R600 in poi... per chi, come me possiede una scheda R500 o inferiore non può che affidarsi ai driver open.
Esistono 2 driver open source i più "antichi" i radeon nati da prima che AMD rilasciasse le specifiche dei suoi prodotti e curati dalla comunità e radeonhd nati dopo il primo rilascio di specifiche e sviluppati da novel, entrambi sono parte del progetto xorg.
I radeon (http://www.x.org/wiki/radeon) sono sviluppati per tutte le famiglie di chip ati dagli R100 completamente supportati, agli R700 supportati,per ora, solo per le funzioni più basilari.
I radeonhd (http://www.x.org/wiki/radeonhd) come il nome lascia intuire sono sviluppati solo per le famiglie di chip grafici più nuove da R500 in poi, sono un driver abbastanza giovane ed ha in comune con il driver radeon parecchi punti (soprattutto riguardo le funzionalità 3d).
Si pensa che in un futuro non troppo lontano i 2 progetti si uniscano in un unico progetto!!!
Link (http://www.x.org/wiki/RadeonFeature) alla tabella completa alle funzionalità implementate nei driver!

Altri link utili:
http://www.x.org/wiki/RadeonProgram
http://dri.freedesktop.org/wiki/ATIRadeon

Io personalmente utilizzo i driver radeon su un notebook con scheda grafica mobility x1600, ho qualche problema con l'uscita s-video e alcune applicazioni 3d... tuttavia la perfetta integrazione dei driver open con xorg e il kernel e la migliore gestione delle finestre composite e (finalmente) il funzionamento deli stadi di sleep non mi fanno assolutamente rimpiangere i fglrx...

Posto qui di seguito il mio xorg.conf accetto suggerimenti per migliorarlo:
Section "Device"
Identifier "Card0"
Driver "radeon" #Nome del driver usato, radeon o radeonhd, in base al driver che vogliamo;
VendorName "ATI Technologies Inc"
BoardName "M56P [Radeon Mobility X1600]"
BusID "PCI:1:0:0" #Penso che questa opzione possa essere eliminata per versioni di >xorg-server-1.5;
Option "AccelMethod" "EXA" #Tipologia di accelerazione 2d;
Option "RenderAccel" "on"
#Option "DynamicClocks" "on" #ATTIVANDO IL KMS NON SERVE PIÙ
Option "DRI" "on" #Opzione che per i driver radeon può essere tolata in quanto on di dafault(va messa per i radeohd);
Option "TVStandard" "pal"
EndSection

Section "DRI"
Mode 0666
EndSection



edit: xorg.conf modificato con l'opzione ATOMTvOut per attivare il supporto al tv-out.
edit: ridotto notevolmente il file, per versioni di xorg-server più recenti della 1.5 non è più necessario il file xorg.conf.
Edit 15/12/2009:attivato il KMS e modificato il xorg.conf togliendo le opzioni obsolete;
ad oggi ancora non riesco ad usare l'uscita TV!!!!

La mia configurazione:
-Chip grafico:mobility x1600(R500);
-Distribuzione:Gentoo;
-Kernel:2.6.32;
-Versione di Xorg-server:1.7.3;
-Versione Driver:6.12.9999;
-Versione Mesa:7.7_RC2;
...
Con la mia attuale configurazione non riesco a giocare a Doom3 e in una virtualmachine windows (tramite virtualbox...) non riesco ad usare l'accelerazione 3d... Tuttavia epsxe funziona correttamente e riesco a giocare con dei titoli abbastanza vecchi tramite wine(FinalFantasy 8!!!)
Sono anche riuscito a giocare tranquillamente a Tremolous!

15/12/2009:dopo l'aggiornamento a mesa-7.7_rc2 le prestazioni nel 3d sono molto mogliorate... ora doom3 funziona quasi bene... ancora non sono gestiti alcuni effetti grafici quindi gli fps sono ancora bassissimi però rispetto a prima ora le texture sono visibili... con glxgears il kms mi ha dimezzato gli Fps... tuttavia sembra non aver influenzato le prestazioni di doom3

Invito tutti gli utilizzatori dei driver open ad iscriversi (comunicando che scheda grafica usano, versione di xorg, versione dei driver ,radeon o radeonhd, cosa hanno testato e in generale come si trovano con i driver open) e tutti gli utilizzatori dei driver ufficiali a provare i driver open XD!

Spero sia abbastanza interessante... segnalatemi errori o imprecisoni e provvederò a sistemare...
Vorrei anche realizzare un piccolo how-to per l'ottimizzazione delle prestazioni anche tramite il tool driconf oltre che mettendo mano allo xorg.conf ma qui non sono troppo pratico quindi per ora aspetto che qualcuno che ne sappia più di me se ne occupi oppure aspetto di acquisire le dovute conoscienze!

In futuro testerò:
-Continuerò a provare giochi e applicazioni 3d;

Cosa aspettarsi in futuro dai driver open:
-Con il kernel 2.6.32 avremo un supporto al KMS migliorato e per tutte le famiglie di chip supportate (fino a r700);
-Con le prossime versioni di mesa e driver radeon avremo un supporto abbastanza completo per quanto riguarda il 3d sui modelli r600 e r700;
-con le versioni del kenrel 2.6.33 e successive verranno affinate tutte le nuove componenti...

McB
20-07-2009, 18:36
Questo 3D può diventare interessante.

Io ho una x1650pro e uso i driver radeon sotto debian che è il mio sistema base, poi ho installato anche ubuntu dato che lì compilano i driver sempre da git giusto per provarli. Le mie considerazioni al momento sono che fanno abbastanza pena tutti e 2 o almeno è così sul mio pc.

Cioè compiz funziona alla grande anche con filmati però appena faccio partire un gioco nativo sotto debian o parte ma non posso cambiare risoluzione che da errore e mi butta fuori o crasha il tutto. Questo con i radeon.
I radeonhd non posso usarli perchè l'ultima stable release dei driver hanno un bug nel leggere le risoluzioni dallo schermo che non mi lasciano selezionare i 1440x900 che poi è l'unica che va bene con questo schermo. Probabilmente potrei editare xorg a mano però non ne ho voglia e fare un Xorg -configure già provato ma al momento di testare crasha.

Sotto ubuntu con tutti e 2 i driver qualsiasi gioco scatta paurosamente. Cioè non solo il video ma pure l'audio ma potrebbe essere un altro problema lì.

Provato su tutti e 2 un giochino directx del cavolo e va ad una velocità pari allo 0.
I fglrx daranno problemi con compiz e video attivati ma almeno potevo giocare tranquillamente ai giochini per windows e quelli nativi ad una velocità più che buona.

Ho guardato anch'io driconf e cambiando qualche parametro non ho notato niente.

Ho provato pure a installare xp su virtualbox con i driver radeon sotto debian. Per qualche arcano motivo se è attivo compiz lo schermo di virtualbox è semitrasparente e inusabile e i giochini hanno lo stesso problema che con wine.

Slayer86
20-07-2009, 19:51
Allora grazie delle tue considerazioni!
Ottimo cominciamo a mettere insieme un po di esperienze...
Presto aggiornerò il promo post con un paio di esperimenti che ho intenzione di fare...
Posso già dirti che con il composit di metacity attivo ho giocato con successo a tremuolus e bloodfrontier mentre non sono riuscito a far funzionare final fantasy 8 sotto wine tekken 3 con epsxe nativo...
Farò altri esperiemnti e vediamo...
Cmq per come hai descrtitto i tuoi problemi secondo me una personalizzazione dello xorg.conf non può che giovarti!

McB
20-07-2009, 20:10
Ecco cosa avevo dimenticato. Ho scritto in fretta perchè ho dovuto uscire di corsa. :)

Xorg.conf l'ho editato un pò. Infatti notavo quanto il tuo fosse più lungo.
Con i radeonhd avevo provato un paio di aggiunte senza però nessun riscontro.
Con i radeon ho aggiunto
Section "Device"
Identifier "Configured Video Device"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "DRI"
Option "AGPMode" "8"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "1"
Option "ColorTiling" "1"
EndSection

e sembra andare un pò meglio ma niente di che.

Cmq non capisco perchè hai messo agpmode 4x se poi gli dici anche che hai il bus pcie.
Io ho dovuto forzarlo a 8x perchè sennò di suo si impostava a 4x

Io se faccio partire un gioco che sfrutta il 3D con compiz attivo questo sfarfalla molto cosa che non succede sotto ubuntu ma lì come scritto sopra mi sa che andrebbe a scatti pure worms :(

Uh dimenticavo una cosa importantissima. Io uso solo distro a 64 bit e non vorrei che è quello che mi crea casini.

Quasi quasi il prossimo fine se ho tempo installo debian e ubuntu a 32bit e vediamo com'è lì la storia.

Slayer86
20-07-2009, 20:31
ok... probabilemente quel'opzione non serve ad un cavolo allora...
avevo copiato da un qualche wiki e mi pareva fosse impostato l'agpmode nonostante il bus fosse pci... se qualcuno mi conferma che non mi serve a nulla provvedo a cavare le opzioni agp :D

Per quanto riguarda il 64 bit non saprei... io ho un sistema a 32... prova se hai tempo/voglia ad installarti una ubuntu 32bit e vedi che succede!

McB
20-07-2009, 20:46
Da "man radeon"
Option "BusType" "string"
Used to replace previous ForcePCIMode option. Should only be
used when driver’s bus detection is incorrect or you want to
force a AGP card to PCI mode. Should NEVER force a PCI card to
AGP bus.
PCI -- PCI bus
AGP -- AGP bus
PCIE -- PCI Express bus
(used only when DRI is enabled)
The default is auto detect.


Direi che è pure un opzione inutile. Puoi cmq provare disabilitando quelle 3 voci e vedere come va.
Per il tvout che hai problemi potresti provare con
Option "ATOMTvOut" "1"
E' in fase sperimentale ma sulle serie dalle rs500 è supportato solo in parte tramite questo comando il tvout. Sempre in base al man.

Slayer86
20-07-2009, 20:58
Da "man radeon"


Direi che è pure un opzione inutile. Puoi cmq provare disabilitando quelle 3 voci e vedere come va.
Per il tvout che hai problemi potresti provare con

E' in fase sperimentale ma sulle serie dalle rs500 è supportato solo in parte tramite questo comando il tvout. Sempre in base al man.

wow... man radeon... che idiota che sono... non ci avevo minimamente pensato...
provo a togliere le opzioni relative all'agp e ad agiungere l'opzione
Option "ATOMTvOut" "1"

poi posto per aggiornare la situazione!

McB
20-07-2009, 21:09
Figurati che per arrivare a man radeon ci avrò messo almeno 6 mesi :D
Prima continuavo a chiedermi dove cavolo la gente tirava fuori quelle opzioni più assurde cercando mezzo web e trovando il tutto sempre frazionato finchè un giorno dalla noia ho dato un man radeon et voilà esiste pure il manuale. Cosa che mi sarei sparato per non esserci arrivato prima.

Slayer86
20-07-2009, 22:29
Figurati che per arrivare a man radeon ci avrò messo almeno 6 mesi :D
Prima continuavo a chiedermi dove cavolo la gente tirava fuori quelle opzioni più assurde cercando mezzo web e trovando il tutto sempre frazionato finchè un giorno dalla noia ho dato un man radeon et voilà esiste pure il manuale. Cosa che mi sarei sparato per non esserci arrivato prima.

:D idem... fino ad ora mi chiedevo come fosse possibile conosciere tutte quelle opzioni...

cmq per quanto riguarda il discorso tv-out... aggiungendo l'opzione sopra riportata finalmente funziona... solo che si vedono i colori tutti sballati... in oltre le risoluzioni e il refesh non sono quelle di una tv pal... quindi i casi sono 2...
-il modulo per gestire il tv-out (non èancora completo...) ancora non funziona perfettamente
-va impostato qualche cosa nella sezione screen e monitor...

cmq sia continuerò a fare qualche tentativo!!! intanto grazie...
spero si aggiunga altra gente che se la discussione viene apprezzata verrà spostata nei thread ufficiali!!!:D

p.s. domani avrò sottomano una connessione a banda larga (a casa mi devo arangiare con una assurda 56k...) quindi avrò modo di installare wine giochi vari ecc... così si comincerà con i test...

McB
21-07-2009, 05:33
Speriamo. Sarebbe interessante sapere se altri riescono a giocare con i driver open.

Slayer86
21-07-2009, 16:36
Allora ho fatto una prova con doom 3 gioco che ho provato a suo tempo sia su windows che con i driver proprietari...
con i driver open non funziona... non sono visualizzate le texture e il gioco gira a pochi fps...
bene fuori uno...

chiaramente ho intenzione di effettuare i test ora e appena gli aggiornamenti ai driver e kernel implementeranno il KMS e il DRI2... vedremo se abbiamo differenze con anche il supporto a gallium...
sta sera aggiornerò le info sul mio sitema... ovvero distro + driver version + xorg-version + mesa version...

alla prossima!!!

Dane
23-07-2009, 13:44
ciao,
io sono alle prese con la configurazione della mia nuova gentoo su un thinkpad X31 (ha una radeon r100 mi pare)

morale della favola:
tuxonice-sources 2.6.28-r10
libdrm 2.4.12
mesa-7.5.1-r1
xf86-video-ati 6.12.2


su KDE 4.2.4, il processore lo tengo fisso a 600Mhz
per avere prestazioni decenti nel 2D devo tenere l'accelerazione su XAA. Con EXA ad occhio va circa ad un terzo della velocità (forse meno).

Da quando ho
- tolto il drm/driver built-in nel kernel
- messo le ultime versioni di drm e mesa (e inserite come moduli esterni)

mi ritrovo con un kernel panic non appena chiudo X. (penso e spero il problema si risolva non appena aggiorno a mesa-7.5.1-r2 ed eventualmente kernel)

Qualcuno ha qualche howto per poter provare KMS e DRI2? Ho visto velocemente dei benchmark su phronix ma non ho ben capito come attivare l'ambaradan....(adesso torno a casa e mi metto a studiare l'argomento, spero :D )

Slayer86
23-07-2009, 13:56
ciao,
io sono alle prese con la configurazione della mia nuova gentoo su un thinkpad X31 (ha una radeon r100 mi pare)

morale della favola:
tuxonice-sources 2.6.28-r10
libdrm 2.4.12
mesa-7.5.1-r1
xf86-video-ati 6.12.2


su KDE 4.2.4, il processore lo tengo fisso a 600Mhz
per avere prestazioni decenti nel 2D devo tenere l'accelerazione su XAA. Con EXA ad occhio va circa ad un terzo della velocità (forse meno).

Da quando ho
- tolto il drm/driver built-in nel kernel
- messo le ultime versioni di drm e mesa (e inserite come moduli esterni)

mi ritrovo con un kernel panic non appena chiudo X. (penso e spero il problema si risolva non appena aggiorno a mesa-7.5.1-r2 ed eventualmente kernel)

Qualcuno ha qualche howto per poter provare KMS e DRI2? Ho visto velocemente dei benchmark su phronix ma non ho ben capito come attivare l'ambaradan....(adesso torno a casa e mi metto a studiare l'argomento, spero :D )

Allora per quanto riguarda KMS e DRI2 penso che per essere attivato serva un kernel con particoari patch... almeno per il momento... ma mi pare di aver capito leggendo si phoronix che dalla prossima versione del kernel i moduli dovrebbero essere inseriti...
Non vedo l'ora che escano novità da testare... tipo appunto KMS e DRI2 più tutta la parte riguardante il supporto a gallium...

Dane
23-07-2009, 14:46
da quel che ho capito si può patchare anche un kernel pre-2.6.31
e quindi andare di kms.....

sembra cmq che attivando tutte queste novità in generale si perdano un po' le prestazioni. A vedere i bench su phronix sembra che se ti va bene vai al doppio, altrimenti vai ad 1/10......:rolleyes:


Adesso vado ad informarmi su che "versione" (virgolette perchè non so bene come si possa indicare) di drm mi ritrovo nel kernel usando il built-in.....

McB
23-07-2009, 18:40
@Dane

Potrebbe essere anche il driver radeon che ti faccia crashare X. Hai provato con gli ultimi da git?
Tutto una mia supposizione ovviamente :)

McB
24-07-2009, 21:01
Qualcuno ha idea su come fare per vedere quanta ram vede il driver radeon?
Ho visto che in xorg si può modificare a mano il parametro e non ho idea cosa scrivere in google :D

Benzino Gasolini
25-07-2009, 21:23
Slackware 12.2
kernel 2.6.30 compilato
Mesa 7.0.3
libdrm 2.3.0
driver xf86-video-ati-6.9.0

il pc in questione é un notebook amilo d 7820 con p4 2.8GHz, 768MB di ram, 100 GB di hd, ATI radeon mobility 9000 64MB dedicati ( agp 4x )

glxgear mi da tra 500, 6/700 fps.

Nei giochi le prestazioni 3d sono deludenti; per esempio in quake 3 ottengo 25-30 fps scarsi con tutto al minimo ( l'engine é ioquake compilato su questo notebook a partire dei sorgenti ) mappa q3tourney1
Il tvout per quel poco che mi serve ( ho uno scriptino che me lo attiva ) funziona senza problema alcuno

Per fortuna che gioco poco :D

Saluti,
B.G.

vincenzo83
26-07-2009, 10:10
Io utilizzo i driver radeon su Fedora 11. Scheda grafica: ATI x800xl. Sapete se è stata rilasciata la documentazione per questa scheda video? (che, se non sbaglio, è la r430)

Slayer86
26-07-2009, 20:10
hanno aperto le specifiche di tutti i modelli di schede da quelli più vecchi al ultima famiglia (r700):D

vincenzo83
27-07-2009, 09:32
hanno aperto le specifiche di tutti i modelli di schede da quelli più vecchi al ultima famiglia (r700):D

Ah bene.
Comunque per effettuare qualche test possiamo utilizzare Phoronix test suite

Dane
01-08-2009, 22:47
x benzino

io, avendo la stessa scheda video (ma con meno ram) faccio 225fps..... sia con exa che xaa.

Mi passeresti il file xorg.conf (o anche il log nel caso xorg.conf venga auto-generato)

Dall'ultimo ho aggiornato il driver xf86-video-ati e ho infilato praticamente tutto ciò che riguarda il drm nel kernel (mi risolve il panic al reboot/halt senza chiudere preventivamente X)


Ciaps!

amd-novello
05-08-2009, 17:50
eccomi slayer ho fatto proprio un bel casino

il bello è che avevo visto sto 3d ma non pensavo mi riguardasse come driver!!!

sono scemo ma da amd.com non avevo capito che la lunga lista era delle schede non + supportate

quindi adesso che ho sia i radeonhd (che non mi accelerano il video) e ho installato quelli del loro sito che non mi vanno bene cosa cavolo faccio?

i pacchetti li so togliere ma avendoli messi con sh ./ come li tolgo?
è proprio vero che se una cosa va bene non bisogna toccarla...

McB
05-08-2009, 18:02
eccomi slayer ho fatto proprio un bel casino

il bello è che avevo visto sto 3d ma non pensavo mi riguardasse come driver!!!

sono scemo ma da amd.com non avevo capito che la lunga lista era delle schede non + supportate

quindi adesso che ho sia i radeonhd (che non mi accelerano il video) e ho installato quelli del loro sito che non mi vanno bene cosa cavolo faccio?

i pacchetti li so togliere ma avendoli messi con sh ./ come li tolgo?
è proprio vero che se una cosa va bene non bisogna toccarla...



Se intendi disinstallare i driver fglrx basta che vai in /usr/share/fglrx e dai sh./fglrx-uninstall.sh come root e al prossimo riavvio sei a posto.
Al massimo prima di riavviare controlli xorg.conf che sia come nuovo.

amd-novello
05-08-2009, 18:18
non ho quella cartella neanche cercandola

il file che ho messo è ati-driver-installer-9.3blablabla

McB
05-08-2009, 18:24
Ach. Scritto male io scusa.
E' in /usr/share/ati.

masand
06-08-2009, 10:19
Ragazzi,
se siete d'accordo sposto la discussione nella sezione dei 3D ufficiali...

Ma l'owner della discussione deve prendersi in carico l'aggiornamento del primo post di tale discussione...

Ok?

Embryo
06-08-2009, 11:25
interessante questa discussione... ho il pc della fidanza con un R700 dentro e vederlo andare un po' più spedito non mi spiacerebbe :D
iscritto!!!

Slayer86
06-08-2009, 11:54
Ragazzi,
se siete d'accordo sposto la discussione nella sezione dei 3D ufficiali...

Ma l'owner della discussione deve prendersi in carico l'aggiornamento del primo post di tale discussione...

Ok?

non ci sono problemi!!!
Sto aspettando contrepidazione novità da provare poi aggionrerò mano a mano la prima pagina!

McB
10-08-2009, 19:58
Tra ieri e oggi ho fatto un paio di test. Alla fine sono riuscito a giocare ad alcuni giochi e sopratutto il MAME via opengl con i driver radeon.

Distribuzione: Debian Squeeze(testing) + qualche pacchetto di Sid (unstable)
Driver: Radeon 6.12.2 + mesa 7.5.3
Scheda video : Sapphire ATI x1650pro 256 mb

Essendo su debian testing prima di tutto ho installato i driver mesa,radeon e xorg da Sid. Ho provato anche con i radeon da git(quelli per ubuntu del 10 luglio) però hanno problemi con i video a schermo intero quindi voglio aspettare che escano i nuovi stabili.

Poi ho settato la sezione "Device" di xorg.conf in questo modo che da me è quello che da i migliori risultati.

Section "Device"
Identifier "Configured Video Device"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "AGPMode" "8"
Option "RenderAccel" "on"
Option "FBTexPercent" "70"
EndSection

Con questo i giochi di suo dovrebbero già funzionare.
Io ho provato con 3 giochi + il MAME

Nexuiz: gira a 1440x900 (che è il massimo per il mio monitor) superfluido senza nessun rallentamento con settaggi abbastanza alti.

Alien Arena: gira ma non mi fa cambiare risoluzione neanche a pagare, quindi non so come si comporti alle alte risoluzioni

Serie Penumbra: Manda in crash tutto X appena si comincia una nuova partita. Fino al menù funziona tutto bene.

MAME:questo sono riuscito a farlo funzionare via opengl e non software dopo aver smanettato con driconf.

Ecco come ho settato driconf.

http://img514.imageshack.us/img514/9312/schermatao.th.png (http://img514.imageshack.us/my.php?image=schermatao.png)

http://img14.imageshack.us/img14/751/schermata1djd.th.png (http://img14.imageshack.us/my.php?image=schermata1djd.png)

Da notare la voce relativa a Disable Low-impact Fallback che di suo dovrebbe essere su sì. Non so per quale motivo da me era su no rallentando MAME.

Slayer86
14-08-2009, 20:36
...dubbio ragazzi...
Allora mi sono ritrovato a ricompilare il kernel per attivare il modulo per le chiavette HSDPA... e leggendo ho pure attivato il drm... ora vorrei sapere se è sbagliata come cosa oppure posso già farlo... uso i driver radeon e ho un kernel 2.6.29....
in caso sia ok come cosa procedo a disintallare il pacchetto x11-drm???

intanto buona serata a tutti! oggi si fa baldoria!!!!!

McB
17-08-2009, 19:27
...dubbio ragazzi...
Allora mi sono ritrovato a ricompilare il kernel per attivare il modulo per le chiavette HSDPA... e leggendo ho pure attivato il drm... ora vorrei sapere se è sbagliata come cosa oppure posso già farlo... uso i driver radeon e ho un kernel 2.6.29....
in caso sia ok come cosa procedo a disintallare il pacchetto x11-drm???

intanto buona serata a tutti! oggi si fa baldoria!!!!!

Io quel pacchetto in debian non ce l'ho. Ho solo un libdrm2 che è installato. Cmq da un paio di giorni il kernel 2.6.30 e passato in testing sotto debian e in teoria il drm è attivo quindi non dovresti avere grossi problemi.
dmesg | grep drm
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs

Per chi ha intenzione di aggiornare il kernel alla nuova versione consiglio di installare subito anche il pacchetto firmware-linux che altrimenti manca il microcode per la scheda grafica e questa non attiva il DRI e tutto il sistema diventa una lumaca.
Cmq con questo nuovo kernel si hanno vantaggi svantaggi. A tratti il sistema sembra più reattivo altre X invece ciucca il processore al 100% per un paio di secondi.

Slayer86
17-08-2009, 20:16
Io quel pacchetto in debian non ce l'ho. Ho solo un libdrm2 che è installato. Cmq da un paio di giorni il kernel 2.6.30 e passato in testing sotto debian e in teoria il drm è attivo quindi non dovresti avere grossi problemi.
dmesg | grep drm
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs

Per chi ha intenzione di aggiornare il kernel alla nuova versione consiglio di installare subito anche il pacchetto firmware-linux che altrimenti manca il microcode per la scheda grafica e questa non attiva il DRI e tutto il sistema diventa una lumaca.
Cmq con questo nuovo kernel si hanno vantaggi svantaggi. A tratti il sistema sembra più reattivo altre X invece ciucca il processore al 100% per un paio di secondi.

sto finendo ora di scaricare il kernel 2.6.30 con la mia linea lumaca... appena finisco lo compilo!
Cmq avevo provato ad attivare il drm nel kernel e a disinstallare il pacchetto x11-drm e il sistema andava paripari a prima!!! bueno...

Slayer86
19-08-2009, 21:34
Ciao a tutti...
Allora mi sono compilato il kernel 2.6.30 sulla mia gentoo e funziona molto bene...
tuttavia la release che dovrebbe interessarci davvero dovrebbe essere la 2.6.31... difatti verrà inserito il Kernel Mode Setting per i driver radeon oltre al TTY memory manager... mi sto documentando e devo dire che sono novità alquanto interessanti e che dovrebbero spianare la strada all'implementazione del dri2 + tutte le funzionalità più comnplesse delle nostre schedine...
sinceramente trovo incredibile questa cosa, nel senso che i driver open stanno evolvendosi in una maniera incredibile... oltre ad incrementare le prestazioni ogni release stanno acquistando una complessità ed integrazione nel kernel davvero notevoli... presto non avremo più bisogno dei driver propietari ati...
e se amd continuerà a rilasciare le specifiche per i futuri prodotti si ritroverà il supporto driver completamente fornito dalla comunità... io trovo questa una cosa estremamente intelligente... bhe viva l'open-source!

McB
19-08-2009, 21:47
Speriamo nel DRI2. In questo momento chi lo testa nota ancori evidenti problemi di velocità. Però con i passi da gigante che stanno facendo non dovrebbe più mancare moltissimo.

Dane
27-08-2009, 09:06
sono riuscito a risolvere i miei problemi con exa. Non ho ben capito a cosa sia dovuto :S
ati 6.12.2-r1 (ho una r100)
mesa 7.5-r3
xorg-server 1.6.3.901
sempre stesso kernel. Ho ancora tutto monolotico (per quanto riguarda la scheda video)

ho aggiornato a 4.3. I FPS in glxgears sono passati a 285 circa (quindi c'è un piccolo miglioramento).

A me non ha fatto differenza, ma sulla intel della mia ragazza si (e parecchia). Provate a modificare il parametro MigrationHeuristic (man exa). Mettendo a greedy ha risolto una valanga di problemi (ma magari è solo un problema delle intel).

Per il microcode: guardando il mio dmesg vedo che il microcode viene caricato più o meno col server. Essendo che il ho i driver built-in mi viene da pensare che il microcode venga caricato con mesa o xf86-video-ati. Che ne pensate?

nomad83
03-09-2009, 08:07
Thread interessante, mi iscrivo!

McB
04-09-2009, 18:52
A me non ha fatto differenza, ma sulla intel della mia ragazza si (e parecchia). Provate a modificare il parametro MigrationHeuristic (man exa). Mettendo a greedy ha risolto una valanga di problemi (ma magari è solo un problema delle intel).

Per il microcode: guardando il mio dmesg vedo che il microcode viene caricato più o meno col server. Essendo che il ho i driver built-in mi viene da pensare che il microcode venga caricato con mesa o xf86-video-ati. Che ne pensate?

Ho provato ora a mettere MigrationHeuristic su greedy con il driver radeon da git di 3 giorni fa. Devo dire che il sistema è diventato molto più reattivo. L'unica cosa che ho notato è che youtube ora scatta parecchio ma in compenso youp..n viaggia che è una meraviglia :oink: :D

Se non sbaglio il microcode viene caricato solo quando il driver lo richiede.

pabloski
04-09-2009, 19:19
tenete presente che in parallelo stanno lavorando anche al porting dei driver radeon verso dri2 e gallium3d, quindi avremo il kernel mode settings entro 3-4 mesi per tutte le gpu radeon

Dane
04-09-2009, 21:44
x McB

ma per flash usi swfdec/gnash o il codec proprietario?

Altra cosa: con smplayer (frontend per mplayer) ho provato a smanettare un po' di opzioni, in particolare il driver video (di default ho xv, ma posso metterne altri). Se metto quello consigliato per le ati mi ritrovo vedendo tutto in B/N. Aggiungo che ho provato solo con files FLV.
Voi che impostazioni usate?
Non sono soddisfatto delle performances (anche se sono ostinato a tenere il povero centrino a 600Mhz :D )

Guardando il changelog/riassumelog :D ho visto che per la mia scheda dovrebbe essere completato in gran parte (per quello che hanno deciso di implementare)
Se ho un po' di tempo/voglia provo a mettere su questo dri2, KMS ecc ecc.

McB
05-09-2009, 06:54
Per flash uso il codec proprietario dato che con quelli open non sono mai riuscito a vedere un filmato. E si che ci ho provato diverse volte.
Cmq è fastidiosa sta cosa. Se tolgo MigrationHeuristic youtube va alla grande e quasi tutti i siti in flash e altri siti in streaming a scatti. Se lo lascio youtube scattoso come non mai ma in compenso i siti in flash diventano navigabilissimi.
Per esempio genialloyd. Non devo aspettare 1 minuto dopo il clic per andare avanti. Mah.

Con smplayer io L'ho su xv(0-radeon textured video) e vedo bene. Ho avuto solo problemi una volta con i driver da git.

Ancora spetterei a provare a settare dri2 e kms dato che a tratti hanno ancora problemi di performance e video in generale.

Ma l'apertura agp nel bios a quanto l'hai settata? Non è che ti va male per poca memoria?

McB
05-09-2009, 11:15
Ho trovato un compromesso tra reatività del sistema e video su youtube. MigrationHeuristic l'ho messo su smart. Ora i filmati su youtube se non tocco il mouse riesco a vederli senza scatti.

Slayer86
05-09-2009, 11:39
Grandi ragazzi! con le novità in arrivo questo sarà uno dei thread più caldi secondo me :D

@Dane: se hai voglia di sperimentare io non vedo l'ora di sapere quali sono i riultati che ottieni!

@Masand: poi non ci sposti più?

@Tutti i partecipanti alla discussione: sarebbe utile secondo voi mettere in prima pagina le info sui partecipanti? Tipo distro usata, versione server x, versione mesa, versione driver e chip grafico?

McB
05-09-2009, 12:19
Secondo me può essere utile. Magari aggiungendo anche la configurazione di xorg.conf così se qualcuno ha quella scheda può fare un copia-incolla veloce senza stare lì a testare le voci una ad una.

Sarà il caso magari di segnalare il post a Masand come promemoria? Che leggere sempre tutte le discussioni la vedo molto ardua.

Slayer86
05-09-2009, 12:58
Secondo me può essere utile. Magari aggiungendo anche la configurazione di xorg.conf così se qualcuno ha quella scheda può fare un copia-incolla veloce senza stare lì a testare le voci una ad una.

Sarà il caso magari di segnalare il post a Masand come promemoria? Che leggere sempre tutte le discussioni la vedo molto ardua.

ok allora settimana prox... lunedì o martedì aggiorno il primo post poi mando un pm a masand se non ha letto il mio post! :D

McB
05-09-2009, 13:13
Io nel frattempo provo a installare su un vecchio portatile con una ati xpress 200 l'alpha di ubuntu 9.10. Così provo il kms e dri2 se disponibile.

McB
05-09-2009, 18:46
Ubuntu 9.10 alpha con kms attivo senza nessuna configurazione particolare in xorg.conf, glxgears fa 5700 contro i 5500 della 9.04. Peccato che i vari programmi crashano ogni 3x2. Più avanti provo a configurare xorg sperando che diventi tutto un pò più stabile

niko717
06-09-2009, 11:38
Io invece ho una ati x1300 con i driver radeon. Con glxgears ho circa 800 fps. Gli effetti 3d di kde 4.3 funzionano bene tranne un fastidiosissimo sfarfallio sulla parte destra del monitor che mi costringe a tenerli disabilitati :rolleyes: I dvd si vedono bene, come i video di youtube e senza rallentamenti. Google earth funziona abbastanza bene. Alcuni giochi 3d come neverball, secret maryo e supertux funzionano bene, altri giochi di pessima grafica come warzone 2100 vanno a scatti con tutti i dettagli minimi. Ho il kernel 2.6.30.5 di Archlinux. Nel frattempo posto il mio xorg.conf... Non c' è un modo per avere prestazioni migliori? Grazie :)

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "xtrap"
Load "freetype"
EndSection

Section "Monitor"
Identifier "SyncMaster 913v"
VendorName "SAM"
ModelName "SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection

Section "Device"
Identifier "ATI X1300"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV515 [Radeon X1300]"
BusID "PCI:1:0:0"
Option "DRI" "true"
Option "ColorTiling" "on"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Modes "default"
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Modes "default"
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Modes "default"
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Modes "default"
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Modes "default"
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Modes "default"
Depth 24
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection

Section "DRI"
Group "video"
Mode 0666
EndSection

McB
06-09-2009, 12:33
A parte che tutta quella marea di voci ormai dovrebbero essere inutili. Cmq per provare potresti commentare tutte queste voci giusto per provare
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "xtrap"
Load "freetype"
EndSection

Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection

Section "DRI"
Group "video"
Mode 0666
EndSection

Sotto la voce device puoi commentare
Option "DRI" "true"
Option "ColorTiling" "on"

e aggiungere
Option "AccelMethod" "EXA"
Option "RenderAccel" "on"
Option "MigrationHeuristic" "smart"

Io ho la migliore performance con MigrationHeuristic su smart. In caso puoi provare anche greedy oppure cancellarla direttamente.

niko717
06-09-2009, 14:10
Grazie per le dritte;) Comunque non ho ottenuto nessun tipo di miglioramento... Anzi, incredibilmente abilitando EXA la situazione è peggiorata, a causa dei fastidiosi sfarfalli sulla parte destra dello schermo. Posto comunque 2 link utili per migliorare le prestazioni dei driver open (magari può servire a qualcuno)...

http://wiki.archlinux.org/index.php/ATI_%28Italiano%29#Installazione_e_Configurazione

http://wiki.ubuntu-it.org/Hardware/Video/Ati/Radeon

McB
06-09-2009, 14:16
Mi viene da pensare che sia un problema di kde a questo punto.

Cmq la maggior parte di quelle opzioni come il dri oppure Colortiling sono abilitati di defaulr dal driver.
AgpFastwrite porta poco o niente di vanataggio ma è più probabile che il sistema sia instabile e il pageflipping è supportato solo su schede più vecchie della tua.

niko717
06-09-2009, 14:21
Vebbè, aspetterò con ansia il KMS... :cool:

pabloski
06-09-2009, 16:03
la cosa migliore è aspettare che la transizione verso dri2/kms/gem sarà completata

il problema è che avere dri e dri2 insieme, il kms che deve funzionare con driver non kms, gem che fluttua di qua e di là rende per forza il sistema poco stabile e/o performante

infatti distribuzioni responsabili come ubuntu valutano i vari upgrade coi piedi di piombo....un esempio banale è il driver fglrx che è vecchissimo rispetto all'attuale versione disponibile

il problema è che le nuove versioni di fglrx semplicemente non vanno su moltissime configurazioni

e lo stesso caos ha colpito i driver open ovviamente

la miglior cosa da fare è trovare una configurazione che funziona, evitare di aggiornare kernel o altri pacchetti che potrebbero mandare al diavolo il sistema e aspettare che la transizione sia completata

Dane
07-09-2009, 21:44
Per flash uso il codec proprietario dato che con quelli open non sono mai riuscito a vedere un filmato. E si che ci ho provato diverse volte.
Cmq è fastidiosa sta cosa. Se tolgo MigrationHeuristic youtube va alla grande e quasi tutti i siti in flash e altri siti in streaming a scatti. Se lo lascio youtube scattoso come non mai ma in compenso i siti in flash diventano navigabilissimi.
Per esempio genialloyd. Non devo aspettare 1 minuto dopo il clic per andare avanti. Mah.

Con smplayer io L'ho su xv(0-radeon textured video) e vedo bene. Ho avuto solo problemi una volta con i driver da git.

Ancora spetterei a provare a settare dri2 e kms dato che a tratti hanno ancora problemi di performance e video in generale.

Ma l'apertura agp nel bios a quanto l'hai settata? Non è che ti va male per poca memoria?

Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility M6 LY"
BusID "PCI:1:0:0"
Option "AGPmode" "4"
Option "AccelMethod" "exa"
Option "EnablePageFlip" "1"
Option "ColorTiling" "1"
Option "RenderAccel" "1"
Option "DRI" "1"
Option "DynamicClocks" "1"
Option "AccelDFS" "1"
Option "GARTSize" "64"

Option "MigrationHeuristic" "greedy"
EndSection

Section "dri"
Mode 0666
EndSection


Depurato dei commenti questo è il mio (intero) xorg.conf.

Aggiornando a mesa 7.5.1 (da 7.5.0-rx -dove x non ricordo cosa sia stato) ho aumentato di poco (una decina di frames) il punteggio di glxgears.
Aggiornando gentoo mi sono ritrovato con i drivres splittati da xorg-server. Prima di fare ulteriori modifiche voglio controllare che sia tutto a posto.

Su smplayer non mi trovo l'opzione xv-textured video. Nel log di xorg mi trovo una voce informativa che dice qualcosa tipo Setting up textured video. Indagherò (anche se penso che potrei risolvere ricompilando mplayer con ICC..... vedo cosa posso fare)....
Mi sono ricordato di non aver spiegato per bene il problema: se faccio partire un video (flv) questo scatta. Se lo metto in pausa (20-30 secondi) e in seguito lo faccio partire sembra andare molto meglio. E' come se dovesse metterlo in buffer per andare meglio. Bho :S


x niko:
nel mio sistema tutto ciò che riguarda il sottosistema grafico è tenuto sempre abbastanza aggiornato.. Ti consiglio di fare altrettanto (pacchetti mesa, xf86-video-ati, libdrm e se puoi xorg-server). Io ho risolto tantissimi problemi con EXA (penso, nel senso che tra una prova e l'altra ho aggiornato anche altre cose) passando da kde 4.2.4 a 4.3. Stanotte faccio compilare kde 4.3.1 (sta già qualche giorno in portage e qualche patch è già stata messa. Vi saprò dire.)

niko717
07-09-2009, 22:46
Comunque con Arch tutto è all'ultima versione, driver ati e kernel compresi ;)

Slayer86
07-09-2009, 23:08
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility M6 LY"
BusID "PCI:1:0:0"
Option "AGPmode" "4"
Option "AccelMethod" "exa"
Option "EnablePageFlip" "1"
Option "ColorTiling" "1"
Option "RenderAccel" "1"
Option "DRI" "1"
Option "DynamicClocks" "1"
Option "AccelDFS" "1"
Option "GARTSize" "64"

Option "MigrationHeuristic" "greedy"
EndSection

Section "dri"
Mode 0666
EndSection


Depurato dei commenti questo è il mio (intero) xorg.conf.

Aggiornando a mesa 7.5.1 (da 7.5.0-rx -dove x non ricordo cosa sia stato) ho aumentato di poco (una decina di frames) il punteggio di glxgears.
Aggiornando gentoo mi sono ritrovato con i drivres splittati da xorg-server. Prima di fare ulteriori modifiche voglio controllare che sia tutto a posto.


Ottimo per quanto riguarda il tuo xorg.conf... sai pensavo che invece di mettere (e quindi mantenere aggiornate...) le configurazioni di tutti nel primo post potremmo mettere una versione che riteniamo ideale... poi aggiungerei sotto alcune migliorie riscontrate e su che tipologia di scheda grafica... che ne pensate?
Io ho notato che la cosa più complicata nel passare dai driver propietari a quelli open è stata la carenza di documentazione... insomma guide se ne trovano una caterva ma non sono mai aggiornate...
se a questa sezione diciamo di how-to aggiungiamo una sezione in cui facciamo test sulle novità tipo kms & co. e test prestazionali in generale penso che possa nascere una discussione davvero ottima! Fatemi sapere soprattutto Dane e McB che siete i più assidui frequentatori!!!

Per quanto riguarda la questione aggiornamento xorg-server con i dirver splittati la trovo una cosa ottima... in questo modo se si vuole aggiungere o rimuovere un supporto ad un dato driver non si deve ricompilare tutto xorg-server!!!

McB
09-09-2009, 20:22
Originariamente inviato da Dane
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility M6 LY"
BusID "PCI:1:0:0"
Option "AGPmode" "4"
Option "AccelMethod" "exa"
Option "EnablePageFlip" "1"
Option "ColorTiling" "1"
Option "RenderAccel" "1"
Option "DRI" "1"
Option "DynamicClocks" "1"
Option "AccelDFS" "1"
Option "GARTSize" "64"

Option "MigrationHeuristic" "greedy"
EndSection

Section "dri"
Mode 0666
EndSection

Mi sono spulciato man radeon e cercato un pò in internet ma del GARTSize non c'è ombra di documentazione. A tratti sembra che sia solo per i devel. Deduco che questa opzione sia l'apertura agp. Cioè quanti mb possa usare della ram. Ho provato per curiosità ad abilitarla pure io ma mi disabilità il dri così. Per caso hai trovato una spiegazione a quella opzione?
Poi sempre da man radeon l'opzione DynamicClocks non esiste. C'è ClockGating che dovrebbe fare quel lavoro e in caso se supportato potresti abilitare pure DynamicPM. In teoria risparmi ancora più energia.
Hai già provato con MigrationHeuristic smart?

Ottimo per quanto riguarda il tuo xorg.conf... sai pensavo che invece di mettere (e quindi mantenere aggiornate...) le configurazioni di tutti nel primo post potremmo mettere una versione che riteniamo ideale... poi aggiungerei sotto alcune migliorie riscontrate e su che tipologia di scheda grafica... che ne pensate?
Io ho notato che la cosa più complicata nel passare dai driver propietari a quelli open è stata la carenza di documentazione... insomma guide se ne trovano una caterva ma non sono mai aggiornate...
se a questa sezione diciamo di how-to aggiungiamo una sezione in cui facciamo test sulle novità tipo kms & co. e test prestazionali in generale penso che possa nascere una discussione davvero ottima! Fatemi sapere soprattutto Dane e McB che siete i più assidui frequentatori!!!

Ottima idea. Tanto in xorg.conf ormai sono da abilitare sempre meno opzioni dato che di default è settato bene.

Per kms & co si può anche fare ma direi più avanti. Ho testato un pò con ubuntu che lo ha abilitato ma c'è sempre qualcosa che crasha. Quindi star lì a testare adesso non penso valga troppo la ena.

Questa è la sezione device del mio xorg.conf

Section "Device"
Identifier "Configured Video Device"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "AGPMode" "8"
Option "RenderAccel" "on"
Option "FBTexPercent" "60"
Option "MigrationHeuristic" "smart"
EndSection

Dane
10-09-2009, 13:43
ma si tratta della tessa manpage di 'man radeon'?
Quella che in fondo che scritto 6.12. e qualcosa?

L'impostazione del GARTsize l'ho trovato qua http://dri.freedesktop.org/wiki/ATIRadeon.

ma i restanti parametri (tipo risparmio energetico) proprio non li trovo. Magari stanno in man xorg.conf (o simili, cmq non ho guardato).

smart non ho provato. Sul mio sistema l'impressione che ho è che cambi pochissimo tra always e greedy. Smart l'ho provata un attimo e mi pareva uguale, forse di un niente peggio. Dovrei riprovare un po'. (cmq si tratta di schede video abbastanza differenti mi pare di capire)


EDIT: devo smanettare un po' con FBTextPercent..... da qualche parte ho letto che è importante....

Dane
10-09-2009, 13:51
2.6.31 is out!

KMS test coming soon :)

slacker
10-09-2009, 14:42
http://www.phoronix.com/scan.php?page=news_item&px=NzUxNg

Slayer86
10-09-2009, 16:08
2.6.31 is out!

KMS test coming soon :)

Che notiziona!!! Tra le altre cose noto dalla pagina delle fauturs implementate nel dirver che si stanno dandoun gran daffare! hanno quasi completato il supporto al 3d per le schede r500!!! tra breve ci sarà parecchio da provare!

pabloski
10-09-2009, 16:09
col 2.6.32 dovrebbe essere messa la parola fine all'odissea ATI :D

McB
10-09-2009, 18:07
ma si tratta della tessa manpage di 'man radeon'?
Quella che in fondo che scritto 6.12. e qualcosa?

L'impostazione del GARTsize l'ho trovato qua http://dri.freedesktop.org/wiki/ATIRadeon.

ma i restanti parametri (tipo risparmio energetico) proprio non li trovo. Magari stanno in man xorg.conf (o simili, cmq non ho guardato).

smart non ho provato. Sul mio sistema l'impressione che ho è che cambi pochissimo tra always e greedy. Smart l'ho provata un attimo e mi pareva uguale, forse di un niente peggio. Dovrei riprovare un po'. (cmq si tratta di schede video abbastanza differenti mi pare di capire)


EDIT: devo smanettare un po' con FBTextPercent..... da qualche parte ho letto che è importante....

Uff. Dimenticavo che io uso i driver da git. Quindi al momento da me sono i 6.12.99. Avranno fatto qualche cambiamento dagli ultimi stabili.Cmq si sono in
"man radeon"

Come supponevo il Gart è per la memoria di sistema. In teoria dovrebbe settarlo in automatico ora. Almeno nel log parla di GART ma non dice quanta memoria. Se io la setto manualmente non mi parte il DRI. Mistero.
FBTextPercent non fa altro che dedicare memoria a EXA. Infatti che ne hai poca dedicata potresti dare quasi tutto a EXA quella dedicata e far usare alle texture quella di sistema. Tentar non nuoce.



Ottimo per il Kernel uscito stabile. Vediamo un pò quando i driver si stabilizzano e via di test. :D

McB
10-09-2009, 20:07
Uscito oggi il nuovo driver stabile 6.12.3 per xorg 7.5. Chissà se vi da qualcosa in più.

Slayer86
11-09-2009, 11:16
Uscito oggi il nuovo driver stabile 6.12.3 per xorg 7.5. Chissà se vi da qualcosa in più.

avevo letto ma più che altro sono bug fix... il grosso del lavoro lo stanno facendo per i 6.13!
Cmq se riescono a completare il supporto per tutte le schede attuali...poi per aggiungere funzionalità o supporto ad altre schede nuove non dovrebbe essere tanto difficile e riciedere tanto tempo... quindi se amd continua a rilasciare le specifiche per le future schede il driver open dovrebbe garanrtire supporto quasi immegiato ai nuovi prodotti... almeno è quello che spero succeda!
E cmq in ambito open la cosa migliore sarebbe che i vari produttori di hw rilasciassero le specifiche per realizzare driver poi ci pensa la comunity a produrli e mantenerli cioè non dovrebbero cacciare un dollaro per il supporto in ambito open... eppure ciò non accade quasi mai, chissa perchè! (cioè un'idea io ce l'ho...)

McB
11-09-2009, 20:40
(cioè un'idea io ce l'ho...)

Se pensi alle finestre più famose al mondo sono della tua stessa idea.

pabloski
12-09-2009, 09:58
suvvia non siamo tragici, alla fine l'unica che continua con la storia della segretezza è una certa nvidia, la stessa nvidia che disse che avrebbe installato windows ce sui suoi dispositivi tegra piuttosto che linux

è chiaro che c'è qualcosa di strano dietro simili comportamenti, qualcosa che non ha nulla a che vedere con questioni tecniche

del resto da un'azienda che dispensa slide piene di fesserie per indottrinare i commessi delle catene dell'elettronica che altro ci si può aspettare?

vedete è di fronte a queste cose che l'antitrust latita, farebbero meglio a smetterla di pensare alle finestrelle per la scelta dei browser e andassero ad indagare seriamente nelle operazioni di quest'azienducola da due bit :D

Slayer86
12-09-2009, 16:27
suvvia non siamo tragici, alla fine l'unica che continua con la storia della segretezza è una certa nvidia, la stessa nvidia che disse che avrebbe installato windows ce sui suoi dispositivi tegra piuttosto che linux

è chiaro che c'è qualcosa di strano dietro simili comportamenti, qualcosa che non ha nulla a che vedere con questioni tecniche

del resto da un'azienda che dispensa slide piene di fesserie per indottrinare i commessi delle catene dell'elettronica che altro ci si può aspettare?

vedete è di fronte a queste cose che l'antitrust latita, farebbero meglio a smetterla di pensare alle finestrelle per la scelta dei browser e andassero ad indagare seriamente nelle operazioni di quest'azienducola da due bit :D

guarda non sono d'accordo... nvidia alla fine principalemente guadagna grazie ai videogiocatori... e quiesti sono esclusiva windows... quindi è ovvio che rivolgano maggiore attenzione verso quel sistema operativo...
Invece è apparentemente inspiegabile il comportamento di aziende tipo asus (ho un notebook che è impossibile riconscere tutti i sensori di temp e regolare la velocità della ventola...) che prima ha prodotto un eee a bassissimo costo con una distribuzione di linux non degna di esistere... poi ha dichiarato a più riprese che il pc in questione è stato venduto in magior parte con windows... e non ha per nulla sfruttato tutto il lavoro che la comunity ha svolto in ottimizzazione di kernel, script per configurare ogni periferica ecc... a me sembra assolutamente stupida come cosa... potrebbero lanciare il prodotto e disinteressarsi dello sviluppo dei driver e simili invece vanno sempre a pescare soluzioni in casa ms...
evidentemente per avere le certificazioni windows gli tocca stare calati e leccare...

pabloski
12-09-2009, 17:12
beh asus non è certo una santa, ma si capisce, ballmer pompa dollari nelle tasche dei dirigenti a pioggia

la storia dei sensori non credo dipenda da asus....alla fine i sensori vengono scelti dal produttore di chipset, che nel caso in questione è nvidia o intel

pure io ho un notebook toshiba, basato su chipset intel dove è impossibile regolare la velocità delle ventole, ma almeno i sensori li legge :D

è il progetto lm_sensors a stare sempre un pochino indietro

il punto è che asus usa roba prodotta da altri, mentre nvidia è direttamente il produttore e occultando le specifiche dei suoi chipset e chip grafici certo non fa un favore a linux, ma nemmeno ad altri sistemi operativi nascenti come haiku

Slayer86
12-09-2009, 18:10
beh asus non è certo una santa, ma si capisce, ballmer pompa dollari nelle tasche dei dirigenti a pioggia

la storia dei sensori non credo dipenda da asus....alla fine i sensori vengono scelti dal produttore di chipset, che nel caso in questione è nvidia o intel

pure io ho un notebook toshiba, basato su chipset intel dove è impossibile regolare la velocità delle ventole, ma almeno i sensori li legge :D

è il progetto lm_sensors a stare sempre un pochino indietro

il punto è che asus usa roba prodotta da altri, mentre nvidia è direttamente il produttore e occultando le specifiche dei suoi chipset e chip grafici certo non fa un favore a linux, ma nemmeno ad altri sistemi operativi nascenti come haiku

sono d'accordo... nvidia è indifendibile... tuttavia almeno rilascia da anni driver linux decenti... il problema è che non da supporto a tutto, vedi hybrid-sli (che è una funzionalità di loro proprietà...), e soprattutto avendo scritto parti di codice propietario per quanto riguarda dri ecc non penso supporterà a breve il kms...

Dane
12-09-2009, 18:32
è probabile che cmq nvidia guardi con molto interesse cosa si muove nel reparto intel-ati.
Se le novità renderanno come dovrebbero voglio proprio vedere se continueranno con tale politica.

Slayer86
12-09-2009, 20:50
è probabile che cmq nvidia guardi con molto interesse cosa si muove nel reparto intel-ati.
Se le novità renderanno come dovrebbero voglio proprio vedere se continueranno con tale politica.

e sarebbe anche ora, nonchè un passo in avanti notevole per il mondo open, difatti si delineerebbe un panorama con i 3 più grandi produttori di hw per utenza desktop (intel,amd,nvidia) che danno pieno supporto a driver open pubblicando le specifiche dei loro prodotti... sarebbe fantastico se questo funzionasse come esempio per tutti i produttori di hw... ci sarebbe il supporto per ogni periferica e i driver verrebbero direttamente integrati nel kernel... sarebbe fantastico... anche se abbastanza utopistico!

niko717
15-09-2009, 18:49
Guardate cosa ho trovato... :cool:
http://www.linuxfeed.org/archlinux/finalmente-warcraft-iii-e-giocabile-con-i-driver-liberi-radeon.html

Dr.FrankenHouse
26-09-2009, 17:31
Sto tentando di installare i radeonhd su Deban Lenny con Radeon HD 2600...per ora il mio xorg è così composto

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
EndSection

Section "Module"
Load "dri"
Load "glx"
EndSection

Section "ServerFlags"
Option "AIGLX" "true"
endSection

Section "Device"
Identifier "ati"
Driver "radeonhd"
BusID "PCI:1:0:0"
Option "DRI" "True"
Option "AGPFastWrite" "True"
Option "AccelMethod" "EXA"
Option "GARTSize" "64"
Option "EnablePageFlip" "1"
Option "ColorTiling" "1"
Option "XAANoOffscreenPixmaps" "True"
Option "RenderAccel" "True"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection



so che ci manca qualcosa...ma cosa?:muro: :muro:

Slayer86
26-09-2009, 20:47
bhe magari posta il risultato di cat /var/log/Xorg.0.log | grep EE
in modo da vedere se e che errori hai all'avvio di xorg... poi scusa non hai nemmeno accennato al tuo problema... come facciamo ad aiutarti...
come ultima cosa io ti consiglio di usare i radeon... mi pare abbiamo maggiorni funzionalità implementate anche sui modelli HD...

Dr.FrankenHouse
27-09-2009, 08:38
bhe magari posta il risultato di cat /var/log/Xorg.0.log | grep EE
in modo da vedere se e che errori hai all'avvio di xorg... poi scusa non hai nemmeno accennato al tuo problema... come facciamo ad aiutarti...
come ultima cosa io ti consiglio di usare i radeon... mi pare abbiamo maggiorni funzionalità implementate anche sui modelli HD...

Scusami per la mancanza di informazioni :doh:
Allora ho da poco formattato e ho deciso di non installare i driver proprietari,però non so proprio dove mettere le mani...Il pc viene usato per usi "scolastici" (un pò di programmazione C/C++,qualche blando database)quindi non mi servono prestano esagerate,al massimo ci metterò su compiz...ma non è nemmeno sicuro.Semplicemente vorrei che la scheda "funzioni" :D


cat /var/log/Xorg.0.log | grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) RADEONHD(0): AtomBIOS returned 12 Grey Levels

McB
27-09-2009, 11:52
Ma hai una scheda agp che vedo agpfastwrite attivo? Cmq come ha detto slayer meglio se provi i radeon normali.

Dane
29-09-2009, 22:57
Mesa 7.5.2 is a bug-fix release fixing issues found since the 7.5.1 release.

The main new feature of Mesa 7.5.x is the Gallium3D infrastructure.



:)



EDIT:
è uscito anche mesa 7.6, per il quale dovrebbero aver riscritto un po' del driver radeon.
Magari quello è più interessante.... :)

McB
30-09-2009, 06:17
Ho fatto un pò di prove nei giorni scorsi aggiornando ubuntu 9.10 con i devel di radeon e mesa e devo dire che la mia ha guadagnato un pò di velocità. E finalmente hanno aggiunto anche il supporto alle VBO anche se ancora immaturo. Almeno adesso la serie penumbra parte anche con i driver open.

Il problema è che ubuntu come sempre con penumbra scatta l'audio come pochi quindi sto cercando di mettere su squeeze con i pacchetti devel video di ubuntu più un kernel compilato da me per attivare il kms.
Ancora non ci sono riuscito a farlo partire bene ma ci riuscirò per fare dei test decenti. :D

Slayer86
30-09-2009, 10:56
Sto aggiornando ora a mesa 7.5.2...

Per quanto riguarda il KMS aspetto che il kernel 2.6.31 sia dichiarato stable su gentoo e ci vorra ancora un po...

La serie penumbra l'avevo fatta comprare da un mio amico e deve ancora passarmi il cd con i giochi scaricati (io devo ancora pagarglieli :D ) ma appena li avrò sotto mano provo pure io...

Poi prometto che aggiorno il primo post!!!

darkbasic
30-09-2009, 14:57
http://www.phoronix.com/scan.php?page=article&item=amd_r600_r700_2d&num=1

zulutown
30-09-2009, 15:29
domanda stupida:

questo sarebbe il driver ati open?

$ modinfo radeon
filename: /lib/modules/2.6.30.5-43.fc11.i586/kernel/drivers/gpu/drm/radeon/radeon.ko

McB
30-09-2009, 18:52
domanda stupida:

questo sarebbe il driver ati open?

$ modinfo radeon
filename: /lib/modules/2.6.30.5-43.fc11.i586/kernel/drivers/gpu/drm/radeon/radeon.ko

Esattamente. :)
Cmq esiste anche radeonhd come driver open.

McB
30-09-2009, 18:54
La serie penumbra l'avevo fatta comprare da un mio amico e deve ancora passarmi il cd con i giochi scaricati (io devo ancora pagarglieli :D ) ma appena li avrò sotto mano provo pure io...

Ti dico già che non serve che provi il gioco fino a quando non hai installato mesa 7.6 dato che il supporto grafico necessario lo hanno appena inserito da un mese ca. Ora devono solo migliorarlo e anche i driver poi devono fare la loro parte.

Slayer86
30-09-2009, 21:21
Ti dico già che non serve che provi il gioco fino a quando non hai installato mesa 7.6 dato che il supporto grafico necessario lo hanno appena inserito da un mese ca. Ora devono solo migliorarlo e anche i driver poi devono fare la loro parte.

Quindi diciamo mesa 7.6 + driver 6.13 e si potrà giocare con i driver open?

McB
01-10-2009, 06:20
Al momento con mesa 7.6 + driver compilati da git si riesce a vedere la grafica in-game ma con evidenti problemi nella visualizzazione e il tutto va mooooolto lento ancora. Però stanno facendo passi da gigante ogni volta che gli riprovo.

Questo fine riprovo ad aggiornare e vediamo come va questa volta.

darkbasic
01-10-2009, 11:30
Io dico che di giocare non se ne parla fino ad almeno mesa 7.7

zulutown
01-10-2009, 14:34
Esattamente. :)
Cmq esiste anche radeonhd come driver open.

sul portatile ho

01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M]


sul pc fisso ho una Radeon 7500

che driver consigliate per queste?
grazie

Slayer86
01-10-2009, 14:47
sul portatile ho

01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M]


sul pc fisso ho una Radeon 7500

che driver consigliate per queste?
grazie

non è che ti consigliamo... sei obbligato ad usare i radeon in entrambi i casi :D

Slayer86
01-10-2009, 14:57
Io dico che di giocare non se ne parla fino ad almeno mesa 7.7

bhe non è che giocare sia il mio passatempo principale...
però non mi dispiacerebbe avere la possibilità di sfruttare la mia schedina a dovere... avendo poi la soddisfazione di farlo usando dei componenti open e che si integrano perfettamente con il kernel e il server grafico :D

Life bringer
01-10-2009, 23:14
Parlando di driver open, solo io mi son trovato MALISSIMO? Ho un 790gx (grafica integrata), dopo un update mi son trovato i driver open invece dei normali vesa e mi trovo il sistema che quando ridimensiono le finestre, le sposto oppure il semplici scrolling delle pagine scatta tutto, c'è una soluzione oltre ad usare i vesa?

darkbasic
01-10-2009, 23:36
Sì, l'esorcista :sofico:

Life bringer
02-10-2009, 05:02
Ah ok, grazie, bello :)

slacker
02-10-2009, 08:21
Parlando di driver open, solo io mi son trovato MALISSIMO? Ho un 790gx (grafica integrata), dopo un update mi son trovato i driver open invece dei normali vesa e mi trovo il sistema che quando ridimensiono le finestre, le sposto oppure il semplici scrolling delle pagine scatta tutto, c'è una soluzione oltre ad usare i vesa?

posta Xorg.0.log

Life bringer
02-10-2009, 09:01
Grazie dell'interessamento prima metto un po' d'info aggiuntive:
Distro: Debian Squeeze 64bit
E come ho detto prima ora sto usando i driver vesa, ecco il log:


This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-1-amd64 x86_64 Debian
Current Operating System: Linux Debian-Server 2.6.30-1-amd64 #1 SMP Sat Aug 15 18:09:19 UTC 2009 x86_64
Build Date: 14 September 2009 01:42:52PM
xorg-server 2:1.6.3.901-1 (jcristau@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 2 08:25:36 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xdc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:5:0) 1002:9614:1849:9614 ATI Technologies Inc Radeon HD 3300 Graphics rev 0, Mem @ 0xf0000000/134217728, 0xfeaf0000/65536, 0xfe900000/1048576, I/O @ 0x0000d000/256
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.2.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
(II) VESA(0): VESA VBE OEM Software Rev: 10.94
(II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: RS780D
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(II) VESA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VESA(0): VESA VBE DDC read successfully
(II) VESA(0): Manufacturer: ACI Model: 17b7 Serial#: 16843009
(II) VESA(0): Year: 2008 Week: 32
(II) VESA(0): EDID Version: 1.3
(II) VESA(0): Digital Display Input
(II) VESA(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) VESA(0): Gamma: 2.20
(II) VESA(0): DPMS capabilities: Off
(II) VESA(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) VESA(0): Default color space is primary color space
(II) VESA(0): First detailed timing is preferred mode
(II) VESA(0): redX: 0.655 redY: 0.337 greenX: 0.273 greenY: 0.617
(II) VESA(0): blueX: 0.144 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) VESA(0): Supported established timings:
(II) VESA(0): 720x400@70Hz
(II) VESA(0): 640x480@60Hz
(II) VESA(0): 640x480@67Hz
(II) VESA(0): 640x480@72Hz
(II) VESA(0): 640x480@75Hz
(II) VESA(0): 800x600@56Hz
(II) VESA(0): 800x600@60Hz
(II) VESA(0): 800x600@72Hz
(II) VESA(0): 800x600@75Hz
(II) VESA(0): 832x624@75Hz
(II) VESA(0): 1024x768@60Hz
(II) VESA(0): 1024x768@70Hz
(II) VESA(0): 1024x768@75Hz
(II) VESA(0): 1280x1024@75Hz
(II) VESA(0): 1152x870@75Hz
(II) VESA(0): Manufacturer's mask: 0
(II) VESA(0): Supported standard timings:
(II) VESA(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) VESA(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) VESA(0): Supported detailed timing:
(II) VESA(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) VESA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) VESA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) VESA(0): Serial No: 88LMVD017306
(II) VESA(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) VESA(0): Monitor name: ASUS VB172
(II) VESA(0): EDID (in hex):
(II) VESA(0): 00ffffffffffff000469b71701010101
(II) VESA(0): 2012010380221b782ed0d5a756469e24
(II) VESA(0): 145054bfef808180714f010101010101
(II) VESA(0): 010101010101302a009851002a403070
(II) VESA(0): 1300520e1100001e000000ff0038384c
(II) VESA(0): 4d56443031373330360a000000fd0038
(II) VESA(0): 4b1f500e000a202020202020000000fc
(II) VESA(0): 00415355532056423137320a2020006a
(II) VESA(0): EDID vendor "ACI", prod id 6071
(II) VESA(0): Using EDID range info for horizontal sync
(II) VESA(0): Using EDID range info for vertical refresh
(II) VESA(0): Printing DDC gathered Modelines:
(II) VESA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) VESA(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) VESA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) VESA(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) VESA(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) VESA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) VESA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) VESA(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) VESA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) VESA(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) VESA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) VESA(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) VESA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) VESA(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) VESA(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) VESA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) VESA(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) VESA(0): Searching for matching VESA mode(s):
Mode: 100 (640x400)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 640
XResolution: 640
YResolution: 400
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 63
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 63
LinNumberOfImagePages: 63
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 101 (640x480)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 640
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 50
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 50
LinNumberOfImagePages: 50
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 103 (800x600)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 832
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 14
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 31
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 832
BnkNumberOfImagePages: 31
LinNumberOfImagePages: 31
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 105 (1024x768)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1024
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 18
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1024
BnkNumberOfImagePages: 18
LinNumberOfImagePages: 18
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 107 (1280x1024)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1280
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 11
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 11
LinNumberOfImagePages: 11
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 111 (640x480)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1280
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 24
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 24
LinNumberOfImagePages: 24
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 114 (800x600)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1600
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 14
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 16
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1600
BnkNumberOfImagePages: 16
LinNumberOfImagePages: 16
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 117 (1024x768)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 2048
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 9
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2048
BnkNumberOfImagePages: 9
LinNumberOfImagePages: 9
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 11a (1280x1024)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 2560
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 5
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 5
LinNumberOfImagePages: 5
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 10e (320x200)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 640
XResolution: 320
YResolution: 200
XCharSize: 8
YCharSize: 8
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 127
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 127
LinNumberOfImagePages: 127
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 120 (320x200)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1280
XResolution: 320
YResolution: 200
XCharSize: 8
YCharSize: 8
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 63
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 63
LinNumberOfImagePages: 63
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 193 (320x240)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 320
XResolution: 320
YResolution: 240
XCharSize: 8
YCharSize: 8
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 127
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 320
BnkNumberOfImagePages: 127
LinNumberOfImagePages: 127
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 195 (320x240)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 640
XResolution: 320
YResolution: 240
XCharSize: 8
YCharSize: 8
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 84
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 84
LinNumberOfImagePages: 84
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 196 (320x240)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1280
XResolution: 320
YResolution: 240
XCharSize: 8
YCharSize: 8
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 50
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 50
LinNumberOfImagePages: 50
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 1b3 (512x384)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 512
XResolution: 512
YResolution: 384
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 63
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 512
BnkNumberOfImagePages: 63
LinNumberOfImagePages: 63
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 1b5 (512x384)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1024
XResolution: 512
YResolution: 384
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 35
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1024
BnkNumberOfImagePages: 35
LinNumberOfImagePages: 35
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 1b6 (512x384)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 2048
XResolution: 512
YResolution: 384
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 18
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2048
BnkNumberOfImagePages: 18
LinNumberOfImagePages: 18
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 1c3 (640x350)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 640
XResolution: 640
YResolution: 350
XCharSize: 8
YCharSize: 14
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 63
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 63
LinNumberOfImagePages: 63
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 1c5 (640x350)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1280
XResolution: 640
YResolution: 350
XCharSize: 8
YCharSize: 14
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 35
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 35
LinNumberOfImagePages: 35
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 1c6 (640x350)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 2560
XResolution: 640
YResolution: 350
XCharSize: 8
YCharSize: 14
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 17
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 17
LinNumberOfImagePages: 17
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 133 (720x400)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 768
XResolution: 720
YResolution: 400
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 50
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 768
BnkNumberOfImagePages: 50
LinNumberOfImagePages: 50
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 135 (720x400)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1472
XResolution: 720
YResolution: 400
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 27
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1472
BnkNumberOfImagePages: 27
LinNumberOfImagePages: 27
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 136 (720x400)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 2944
XResolution: 720
YResolution: 400
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 13
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2944
BnkNumberOfImagePages: 13
LinNumberOfImagePages: 13
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 153 (1152x864)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1152
XResolution: 1152
YResolution: 864
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 15
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1152
BnkNumberOfImagePages: 15
LinNumberOfImagePages: 15
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 155 (1152x864)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 2304
XResolution: 1152
YResolution: 864
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 7
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2304
BnkNumberOfImagePages: 7
LinNumberOfImagePages: 7
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 156 (1152x864)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 4608
XResolution: 1152
YResolution: 864
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 3
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 4608
BnkNumberOfImagePages: 3
LinNumberOfImagePages: 3
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 163 (1280x1024)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1280
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 11
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 11
LinNumberOfImagePages: 11
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 165 (1280x1024)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 2560
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 5
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 5
LinNumberOfImagePages: 5
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 166 (1280x1024)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 5120
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 2
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 5120
BnkNumberOfImagePages: 2
LinNumberOfImagePages: 2
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 121 (640x480)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 2560
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 12
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 12
LinNumberOfImagePages: 12
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 122 (800x600)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 3200
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 14
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 7
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3200
BnkNumberOfImagePages: 7
LinNumberOfImagePages: 7
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 123 (1024x768)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 4096
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 4
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 4096
BnkNumberOfImagePages: 4
LinNumberOfImagePages: 4
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
*Mode: 124 (1280x1024)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 5120
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 2
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 5120
BnkNumberOfImagePages: 2
LinNumberOfImagePages: 2
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 143 (1400x1050)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1408
XResolution: 1400
YResolution: 1050
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 10
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1408
BnkNumberOfImagePages: 10
LinNumberOfImagePages: 10
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 145 (1400x1050)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 2816
XResolution: 1400
YResolution: 1050
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 4
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2816
BnkNumberOfImagePages: 4
LinNumberOfImagePages: 4
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 146 (1400x1050)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 5632
XResolution: 1400
YResolution: 1050
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 5632
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 173 (1600x1200)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1600
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 7
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1600
BnkNumberOfImagePages: 7
LinNumberOfImagePages: 7
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 175 (1600x1200)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 3200
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 3
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3200
BnkNumberOfImagePages: 3
LinNumberOfImagePages: 3
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 176 (1600x1200)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 6400
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 6400
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 183 (1792x1344)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1792
XResolution: 1792
YResolution: 1344
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 5
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1792
BnkNumberOfImagePages: 5
LinNumberOfImagePages: 5
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 185 (1792x1344)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 3584
XResolution: 1792
YResolution: 1344
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 2
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3584
BnkNumberOfImagePages: 2
LinNumberOfImagePages: 2
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 186 (1792x1344)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 7168
XResolution: 1792
YResolution: 1344
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 7168
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 1d3 (1856x1392)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1856
XResolution: 1856
YResolution: 1392
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 5
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1856
BnkNumberOfImagePages: 5
LinNumberOfImagePages: 5
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 1d5 (1856x1392)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 3712
XResolution: 1856
YResolution: 1392
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 2
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3712
BnkNumberOfImagePages: 2
LinNumberOfImagePages: 2
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 1d6 (1856x1392)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 7424
XResolution: 1856
YResolution: 1392
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 7424
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 1e3 (1920x1440)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 1920
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 4
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1920
BnkNumberOfImagePages: 4
LinNumberOfImagePages: 4
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 1e5 (1920x1440)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 3840
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 2
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3840
BnkNumberOfImagePages: 2
LinNumberOfImagePages: 2
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
Mode: 1e6 (1920x1440)
ModeAttributes: 0xba
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc00051ff
BytesPerScanline: 7680
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 7680
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000

(II) VESA(0): Total Memory: 256 64KB banks (16384kB)
(II) VESA(0): Configured Monitor: Using hsync range of 31.00-80.00 kHz
(II) VESA(0): Configured Monitor: Using vrefresh range of 56.00-75.00 Hz
(II) VESA(0): Configured Monitor: Using maximum pixel clock of 140.00 MHz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "640x350" (no mode of this name)
(II) VESA(0): Not using built-in mode "512x384" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
(--) VESA(0): Virtual size is 1280x1024 (pitch 1280)
(**) VESA(0): *Built-in mode "1280x1024"
(**) VESA(0): *Built-in mode "1280x1024"
(**) VESA(0): *Built-in mode "1152x864"
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(**) VESA(0): *Built-in mode "720x400"
(**) VESA(0): Display dimensions: (340, 270) mm
(**) VESA(0): DPI set to (95, 96)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
(II) VESA(0): VESA VBE OEM Software Rev: 10.94
(II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: RS780D
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(II) VESA(0): virtual address = 0x7f72a77f8000,
physical address = 0xf0000000, size = 16777216
(II) VESA(0): Setting up VESA Mode 0x166 (1280x1024)
(II) VESA(0): VBESetVBEMode failed...Tried again without customized values.
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(II) VESA(0): DPMS enabled
(WW) VESA(0): Option "UseFBDev" is not used
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device USB-compliant keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event2"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event3"
(II) USB-compliant keyboard: Found 14 mouse buttons
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) USB-compliant keyboard: (accel) keeping acceleration scheme 1
(**) USB-compliant keyboard: (accel) filter chain progression: 2.00
(**) USB-compliant keyboard: (accel) filter stage 0: 20.00 ms
(**) USB-compliant keyboard: (accel) set acceleration profile 0
(II) USB-compliant keyboard: initialized for relative axes.
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device HID 04b4:0033
(**) HID 04b4:0033: always reports core events
(**) HID 04b4:0033: Device: "/dev/input/event1"
(II) HID 04b4:0033: Found 9 mouse buttons
(II) HID 04b4:0033: Found x and y relative axes
(II) HID 04b4:0033: Found scroll wheel(s)
(II) HID 04b4:0033: Configuring as mouse
(**) HID 04b4:0033: YAxisMapping: buttons 4 and 5
(**) HID 04b4:0033: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 04b4:0033" (type: MOUSE)
(**) HID 04b4:0033: (accel) keeping acceleration scheme 1
(**) HID 04b4:0033: (accel) filter chain progression: 2.00
(**) HID 04b4:0033: (accel) filter stage 0: 20.00 ms
(**) HID 04b4:0033: (accel) set acceleration profile 0
(II) HID 04b4:0033: initialized for relative axes.


Questo è il conf:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
Option "UseFBDev" "true"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection

slacker
02-10-2009, 09:18
Lascia perdere i vesa, usa i radeon.

prova cosi:
Section "Device"
Identifier "Radeon 790gx"
Driver "radeon"
Option "DRI" "true"
Option "AccelMethod" "EXA"
EndSection


E se ci sono problemi riposta il log

Life bringer
02-10-2009, 09:29
Fatto, purtroppo permane il problema che ho descritto all'inizio e che non ho con i vesa, ad esempio la finestra di xchat quando scrolla scatta di brutto, idem quando muovo una finestra, ecco il log:



This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-1-amd64 x86_64 Debian
Current Operating System: Linux Debian-Server 2.6.30-1-amd64 #1 SMP Sat Aug 15 18:09:19 UTC 2009 x86_64
Build Date: 14 September 2009 01:42:52PM
xorg-server 2:1.6.3.901-1 (jcristau@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 2 10:25:55 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Radeon 790gx"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xdc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:5:0) 1002:9614:1849:9614 ATI Technologies Inc Radeon HD 3300 Graphics rev 0, Mem @ 0xf0000000/134217728, 0xfeaf0000/65536, 0xfe900000/1048576, I/O @ 0x0000d000/256
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 6.12.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000feaf0000
(II) RADEON(0): MMIO registers at 0x00000000feaf0000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3300 Graphics" (ChipID = 0x9614)
(--) RADEON(0): Linear framebuffer at 0x00000000f0000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1002 SubsystemID: 0x1002
IOBaseAddress: 0xd000
Filename: ODE790GX_D2.
BIOS Bootup Message:
113-B27722-X28 RS780D DDR2 200e/500m

(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 200000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.30.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.

(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk: 200.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(II) RADEON(0): Output VGA-0 using monitor section Configured Monitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-D
DFP3: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: ACI Model: 17b7 Serial#: 16843009
(II) RADEON(0): Year: 2008 Week: 32
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.655 redY: 0.337 greenX: 0.273 greenY: 0.617
(II) RADEON(0): blueX: 0.144 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 88LMVD017306
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: ASUS VB172
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000469b71701010101
(II) RADEON(0): 2012010380221b782ed0d5a756469e24
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff0038384c
(II) RADEON(0): 4d56443031373330360a000000fd0038
(II) RADEON(0): 4b1f500e000a202020202020000000fc
(II) RADEON(0): 00415355532056423137320a2020006a
finished output detect: 1
finished all detect
before xf86InitialConfiguration
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): EDID for output DVI-0
(II) RADEON(0): Manufacturer: ACI Model: 17b7 Serial#: 16843009
(II) RADEON(0): Year: 2008 Week: 32
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.655 redY: 0.337 greenX: 0.273 greenY: 0.617
(II) RADEON(0): blueX: 0.144 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 88LMVD017306
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: ASUS VB172
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000469b71701010101
(II) RADEON(0): 2012010380221b782ed0d5a756469e24
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff0038384c
(II) RADEON(0): 4d56443031373330360a000000fd0038
(II) RADEON(0): 4b1f500e000a202020202020000000fc
(II) RADEON(0): 00415355532056423137320a2020006a
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: ACI Model: 17b7 Serial#: 16843009
(II) RADEON(0): Year: 2008 Week: 32
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.655 redY: 0.337 greenX: 0.273 greenY: 0.617
(II) RADEON(0): blueX: 0.144 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 88LMVD017306
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: ASUS VB172
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000469b71701010101
(II) RADEON(0): 2012010380221b782ed0d5a756469e24
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff0038384c
(II) RADEON(0): 4d56443031373330360a000000fd0038
(II) RADEON(0): 4b1f500e000a202020202020000000fc
(II) RADEON(0): 00415355532056423137320a2020006a
(II) RADEON(0): Panel infos found from DDC detailed: 1280x1024
(II) RADEON(0): EDID vendor "ACI", prod id 6071
(II) RADEON(0): Printing probed modes for output DVI-0
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output DVI-0 using initial mode 1280x1024
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEON(0): RADEONScreenInit f0000000 0 0
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0x00c700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 131008 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 64 kb for PCI GART at offset 0x07ff0000
(II) RADEON(0): Will use 6400 kb for back buffer at offset 0x00648000
(II) RADEON(0): Will use 6400 kb for depth buffer at offset 0x00c88000
(II) RADEON(0): Will use 55808 kb for textures at offset 0x012c8000
(II) RADEON(0): Will use 55968 kb for X Server offscreen at offset 0x04948000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xf0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0x1270a200
(II) RADEON(0): [pci] ring handle = 0x2effe000
(II) RADEON(0): [pci] Ring mapped at 0x7fb9bae36000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x1effe000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x7fb9baf58000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x2efff000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7fb9ae768000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x2f000000
(II) RADEON(0): [pci] GART Texture map mapped at 0x7fb9acae8000
(II) RADEON(0): [drm] register handle = 0x2fff8000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00c700c0 0x00c700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0x1efff000 at 0x7fb9baf59000
(II) RADEON(0): [drm] Closed DRM master.
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed
(II) RADEON(0): Acceleration disabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1280x1024 - 1688 1066 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00c700c0 0x00c700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
freq: 108000000
best_freq: 107996667
best_feedback_div: 181
best_ref_div: 3
best_post_div: 8
(II) RADEON(0): crtc(0) Clock: mode 108000, PLL 107990
(II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0xB5(181), pdiv 8
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1280x1024 - 1688 1066 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00c700c0 0x00c700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
freq: 108000000
best_freq: 107996667
best_feedback_div: 181
best_ref_div: 3
best_post_div: 8
(II) RADEON(0): crtc(0) Clock: mode 108000, PLL 107990
(II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0xB5(181), pdiv 8
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 270
(II) config/hal: Adding input device USB-compliant keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event2"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event3"
(II) USB-compliant keyboard: Found 14 mouse buttons
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(**) USB-compliant keyboard: (accel) keeping acceleration scheme 1
(**) USB-compliant keyboard: (accel) filter chain progression: 2.00
(**) USB-compliant keyboard: (accel) filter stage 0: 20.00 ms
(**) USB-compliant keyboard: (accel) set acceleration profile 0
(II) USB-compliant keyboard: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device HID 04b4:0033
(**) HID 04b4:0033: always reports core events
(**) HID 04b4:0033: Device: "/dev/input/event1"
(II) HID 04b4:0033: Found 9 mouse buttons
(II) HID 04b4:0033: Found x and y relative axes
(II) HID 04b4:0033: Found scroll wheel(s)
(II) HID 04b4:0033: Configuring as mouse
(**) HID 04b4:0033: YAxisMapping: buttons 4 and 5
(**) HID 04b4:0033: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 04b4:0033" (type: MOUSE)
(**) HID 04b4:0033: (accel) keeping acceleration scheme 1
(**) HID 04b4:0033: (accel) filter chain progression: 2.00
(**) HID 04b4:0033: (accel) filter stage 0: 20.00 ms
(**) HID 04b4:0033: (accel) set acceleration profile 0
(II) HID 04b4:0033: initialized for relative axes.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): EDID for output DVI-0
(II) RADEON(0): Manufacturer: ACI Model: 17b7 Serial#: 16843009
(II) RADEON(0): Year: 2008 Week: 32
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.655 redY: 0.337 greenX: 0.273 greenY: 0.617
(II) RADEON(0): blueX: 0.144 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 88LMVD017306
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: ASUS VB172
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000469b71701010101
(II) RADEON(0): 2012010380221b782ed0d5a756469e24
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff0038384c
(II) RADEON(0): 4d56443031373330360a000000fd0038
(II) RADEON(0): 4b1f500e000a202020202020000000fc
(II) RADEON(0): 00415355532056423137320a2020006a
(II) RADEON(0): EDID vendor "ACI", prod id 6071
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: ACI Model: 17b7 Serial#: 16843009
(II) RADEON(0): Year: 2008 Week: 32
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.655 redY: 0.337 greenX: 0.273 greenY: 0.617
(II) RADEON(0): blueX: 0.144 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 88LMVD017306
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: ASUS VB172
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000469b71701010101
(II) RADEON(0): 2012010380221b782ed0d5a756469e24
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff0038384c
(II) RADEON(0): 4d56443031373330360a000000fd0038
(II) RADEON(0): 4b1f500e000a202020202020000000fc
(II) RADEON(0): 00415355532056423137320a2020006a
(II) RADEON(0): EDID vendor "ACI", prod id 6071
(II) RADEON(0): Printing probed modes for output DVI-0
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): EDID for output DVI-0
(II) RADEON(0): Manufacturer: ACI Model: 17b7 Serial#: 16843009
(II) RADEON(0): Year: 2008 Week: 32
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.655 redY: 0.337 greenX: 0.273 greenY: 0.617
(II) RADEON(0): blueX: 0.144 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 88LMVD017306
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: ASUS VB172
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000469b71701010101
(II) RADEON(0): 2012010380221b782ed0d5a756469e24
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff0038384c
(II) RADEON(0): 4d56443031373330360a000000fd0038
(II) RADEON(0): 4b1f500e000a202020202020000000fc
(II) RADEON(0): 00415355532056423137320a2020006a
(II) RADEON(0): EDID vendor "ACI", prod id 6071
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: ACI Model: 17b7 Serial#: 16843009
(II) RADEON(0): Year: 2008 Week: 32
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.655 redY: 0.337 greenX: 0.273 greenY: 0.617
(II) RADEON(0): blueX: 0.144 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 88LMVD017306
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: ASUS VB172
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000469b71701010101
(II) RADEON(0): 2012010380221b782ed0d5a756469e24
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff0038384c
(II) RADEON(0): 4d56443031373330360a000000fd0038
(II) RADEON(0): 4b1f500e000a202020202020000000fc
(II) RADEON(0): 00415355532056423137320a2020006a
(II) RADEON(0): EDID vendor "ACI", prod id 6071
(II) RADEON(0): Printing probed modes for output DVI-0
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): EDID for output DVI-0
(II) RADEON(0): Manufacturer: ACI Model: 17b7 Serial#: 16843009
(II) RADEON(0): Year: 2008 Week: 32
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.655 redY: 0.337 greenX: 0.273 greenY: 0.617
(II) RADEON(0): blueX: 0.144 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 88LMVD017306
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: ASUS VB172
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000469b71701010101
(II) RADEON(0): 2012010380221b782ed0d5a756469e24
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff0038384c
(II) RADEON(0): 4d56443031373330360a000000fd0038
(II) RADEON(0): 4b1f500e000a202020202020000000fc
(II) RADEON(0): 00415355532056423137320a2020006a
(II) RADEON(0): EDID vendor "ACI", prod id 6071
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: ACI Model: 17b7 Serial#: 16843009
(II) RADEON(0): Year: 2008 Week: 32
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.655 redY: 0.337 greenX: 0.273 greenY: 0.617
(II) RADEON(0): blueX: 0.144 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 88LMVD017306
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: ASUS VB172
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000469b71701010101
(II) RADEON(0): 2012010380221b782ed0d5a756469e24
(II) RADEON(0): 145054bfef808180714f010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff0038384c
(II) RADEON(0): 4d56443031373330360a000000fd0038
(II) RADEON(0): 4b1f500e000a202020202020000000fc
(II) RADEON(0): 00415355532056423137320a2020006a
(II) RADEON(0): EDID vendor "ACI", prod id 6071
(II) RADEON(0): Printing probed modes for output DVI-0
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)

Slayer86
02-10-2009, 09:39
Quando postate il log perfavore... postate il risultato del comando
cat /var/log/Xorg.0.log | grep EE

altrimenti abbiamo un log di 3000 righe e quelle che ci interessano sono solo un paio!!!

nel tuo caso:
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed

Adesso vediamo se qualcuno può aiutarti!!!

Io pulirei tutto lo xorg.conf e lascierei solo la sezione device impostata come ti ha detto slacker!!!

Life bringer
02-10-2009, 09:45
Pardon non sapevo quali righe interessassero :)

Quindi dovrei avere un xorg così:

Section "Device"
Identifier "Radeon 790gx"
Driver "radeon"
Option "DRI" "true"
Option "AccelMethod" "EXA"
EndSection


Invece che così:

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Radeon 790gx"
Driver "radeon"
Option "DRI" "true"
Option "AccelMethod" "EXA"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection


:mbe:

slacker
02-10-2009, 09:58
Ma il modulo radeon è caricato? "lsmod | grep readeon"
Se hai la possibilità, aggiorna il kernel, 2.6.31 o meglio ancora 2.6.32-rc1 :)
Altrimenti cambia EXA a XAA in xorg.conf, dovrebbe andare meglio. Poi però quando avrai un kernel più recente rimetti EXA.

Slayer86
02-10-2009, 10:01
Pardon non sapevo quali righe interessassero :)

Quindi dovrei avere un xorg così:

Section "Device"
Identifier "Radeon 790gx"
Driver "radeon"
Option "DRI" "true"
Option "AccelMethod" "EXA"
EndSection


Invece che così:

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Radeon 790gx"
Driver "radeon"
Option "DRI" "true"
Option "AccelMethod" "EXA"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection


:mbe:

esatto!
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "M56P [Radeon Mobility X1600]"
BusID "PCI:1:0:0"
Option "AccelMethod" "EXA"
Option "RenderAccel" "on"
Option "DynamicClocks" "on"
Option "DRI" "on"
Option "TVDACLoadDetect" "true"
Option "ATOMTvOut" "true"
Option "TVStandard" "pal"
EndSection

Section "DRI"
Mode 0666
EndSection


Questo è il mio!!!
Intanto prova risolvere gli errori che notifica xorg... poi puoi pensare a varie ottimizzazioni!!!

Cmq se xorg-server è aggiornato (mi pare dalla versione 1.5 ma non sono sicurissimo...) non hai bisogno di specificare nulla nello xorg.conf... e quindi meno roba c'è meno prob di avere errori hai...
Ricordo che appena aggionrato non mi funzionava più il touchpad... poi ho ripulito xorg.conf e tutto funziona a meraviglia ora...

Life bringer
02-10-2009, 10:01
Ehm... non è caricato a quanto pare :doh:
Scrivendo il comando non ho alcun output
Edit: quello è comunque l'xorg che mi ha creato automaticamente circa un paio di settimane fa dando l'apposito comando (che ovviamente non ricordo quale essere -_-'')

Slayer86
02-10-2009, 10:12
Ehm... non è caricato a quanto pare :doh:
Scrivendo il comando non ho alcun output
Edit: quello è comunque l'xorg che mi ha creato automaticamente circa un paio di settimane fa dando l'apposito comando (che ovviamente non ricordo quale essere -_-'')

non hai fato copia incolla del comando che ti ha scritto slacker vero???
perchè ha sbagliato a digitare ed ha messo readon invece di radeon!

cmq il xorg.conf che ti genera in automatico è una roba standard... se vuoi tineitelo cosa devo dirti... è 3 volte che ti dico che è inutile...fa come vuoi!

Life bringer
02-10-2009, 10:13
Si invece :asd:
Ecco:
Debian-Server:~# lsmod | grep radeon
radeon 141984 0
drm 172688 1 radeon
Debian-Server:~#

Ok provo a moddarlo l'xorg conf :p

Done ho seguito il tuo consiglio, riavviato e:
Debian-Server:/var/log# cat /var/log/Xorg.0.log | grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) RADEON(0): Acceleration initialization failed
Debian-Server:/var/log#

Stessi problemi!
Secondo me è proprio "sfigata" come serie, nel senso che quando avevo il 780G mi funzionava tutto, ora anche i driver closed non funzionano :|
Un bel giorno feci la prova d'installare ubuntu e fargli usare i driver closed, risultato: sistema con gdm incriccato :\

slacker
02-10-2009, 10:26
Commenta sta linea che tanto serve solo per i radeonhd:
Option "DRI" "true"

E invece cambia questa:
Option "AccelMethod" "EXA"

con
Option "AccelMethod" "XAA"

Se va ancora a scatti posta il log. Cmq il supporto 3D per i chipset R600 è stato aggiunto nel kernel 2.6.32

Life bringer
02-10-2009, 10:30
Grazie per l'assistenza, quindi nel caso scatti comunque mi consigli di andare su kernel.org e scaricare l'ultima rel?

Edit: Sempre uguale, il log presenta sempre le 2 solite righe e xorg gli stessi problemi :v

slacker
02-10-2009, 10:49
In dmesg trovi qualche messaggio?
Per caso hai qualche residuo dei driver closed ancora installato?

Life bringer
02-10-2009, 10:57
Sono ragionevolmente sicuro di aver fatto una bella pulizia (ho seguito una guida ai tempi):
[ 24.124004] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:05.0 on minor 0
[ 24.784508] [drm] Setting GART location based on new memory map
[ 24.788003] [drm] Loading RS780 CP Microcode
[ 24.788003] platform r600_cp.0: firmware: requesting radeon/RS780_cp.bin
[ 24.908544] r600_cp: Failed to load firmware "radeon/RS780_cp.bin"
[ 24.908544] [drm:r600_do_init_cp] *ERROR* Failed to load firmware!
Questo può c'entrare?

T'incollo anche un link al log completo: http://nemoitaly.gotdns.com/dmesg.txt

Grazie per l'assistenza :p

slacker
02-10-2009, 11:02
ti manca il firmware.
Da una breve ricerca in google ho trovato questo:
http://www.mail-archive.com/debian-kernel@lists.debian.org/msg45871.html
vedi se aiuta..

Life bringer
02-10-2009, 11:31
Aiuta molto e bene, ho risolto installando il pacchetto firmware!
Altre ottimizzazioni da applicare?

Slayer86
02-10-2009, 11:51
Aiuta molto e bene, ho risolto installando il pacchetto firmware!
Altre ottimizzazioni da applicare?

ottimo!!!

McB
12-10-2009, 20:04
Da un paio di giorni mesa 7.6 è passata in testing su debian. Ora con la mia x1650 ho messo MigrationHeuristic su greedy e guarda te. Tutti i video flash vanno tranquillamente anche in hd. Ora non mi resta che attendere di riuscire a compilare sto benedetto kernel 2.6.31 per attivare il kms e vedere come va poi.

Devo dire che stanno progredendo veramente tanto. :)


Ps: ma il post non doveva andare tra le guide ufficiali?

Slayer86
12-10-2009, 21:41
Da un paio di giorni mesa 7.6 è passata in testing su debian. Ora con la mia x1650 ho messo MigrationHeuristic su greedy e guarda te. Tutti i video flash vanno tranquillamente anche in hd. Ora non mi resta che attendere di riuscire a compilare sto benedetto kernel 2.6.31 per attivare il kms e vedere come va poi.

Devo dire che stanno progredendo veramente tanto. :)


Ps: ma il post non doveva andare tra le guide ufficiali?

mando un pm a masand...:D

Slayer86
26-10-2009, 18:39
Aggiornamento!!!
Oggio ho riprovato dopo un po di tempo a giocare a tekken 3 con epsxe.... e finalmente funziona... penso sia dovuto al passaggio a mesa 7.5 (era parecchio che non ci provavo!!!) in più sotto wine funziona final fantasy 8!!!
Stiamo migliorando!!!

edit:p.s. masand mi aveva risposto che il therad sarà spostato quando i dirver open funzioneranno correttamente in modo da poter aggiornare con info significative il prima post!!!

Slayer86
27-10-2009, 12:08
In portage hanno inserito xorg-server-1.7.1 lo sto aggiornando ora!!!
Penso che a breve inseriranno anche mesa 7.6 e stabilizzeranno il kernel 2.6.31...
Quindi novità in arrivo! Vediamo se ci saranno miglioramenti!

Alexxio
03-11-2009, 21:17
ciao a tutti. spero che qualcuno riesca a darmi una mano perchè non so piu come muovermi!!
allora, ho bisogno di capire perchè la mia mandriva è così lenta con kde4...
ho una ati 3450 e mandriva 2009.1..
in pratica quando dico che è lenta mi riferisco al fatto che se cerco ad esempio di spostare una qualsiasi finestra da una parte all'altra dello schermo, si muove a scattissimi..come a 3 fps..e ogni applicazione o animazione per aprirsi ci mette ore... ma l'hw del pc non è così obsoleto perchè il pc ha solo un anno di vita!! pensavo fosse qualcosa con i driver proprietari infatti quando li ho disinstallati almeno su gnome ora posso andare tranquillamente.. però su kde no... è ancora lenta..
forse qualcuno ci è già passato e ha qualche consiglio?
vi ringrazio!!

darkbasic
03-11-2009, 21:42
Stasera ho reinstallato gentoo sul fisso, si torna a giocare con i driver open per R600 e mesa git head :D

xyz0n
04-11-2009, 13:25
Ciao a tutti sono nuovissimo, e sicuramente potrei fare una domanda che è gia' stata fatta mille volte.....chiedo venia :cry:
ho installato ubuntu,e vorrei installare i driver video, nel mio pc ho una vecchia ati radeon 9600, esistono dei driver??
Grazie a tutti :flower:

Slayer86
04-11-2009, 15:00
Ciao a tutti sono nuovissimo, e sicuramente potrei fare una domanda che è gia' stata fatta mille volte.....chiedo venia :cry:
ho installato ubuntu,e vorrei installare i driver video, nel mio pc ho una vecchia ati radeon 9600, esistono dei driver??
Grazie a tutti :flower:

credo che ubuntu si sia già auto configurato con i driver radeon!

xyz0n
06-11-2009, 14:41
credo che ubuntu si sia già auto configurato con i driver radeon!

Ciao grazie della risposta.
Si in effetti, l'accellerazione video è attiva, pero' come mai alcune aplicazioni, tipo cairo dock, non funzionano sotto open-gl? sto'facendo confusione?:muro:

McB
06-11-2009, 19:38
ciao a tutti. spero che qualcuno riesca a darmi una mano perchè non so piu come muovermi!!
allora, ho bisogno di capire perchè la mia mandriva è così lenta con kde4...
ho una ati 3450 e mandriva 2009.1..
in pratica quando dico che è lenta mi riferisco al fatto che se cerco ad esempio di spostare una qualsiasi finestra da una parte all'altra dello schermo, si muove a scattissimi..come a 3 fps..e ogni applicazione o animazione per aprirsi ci mette ore... ma l'hw del pc non è così obsoleto perchè il pc ha solo un anno di vita!! pensavo fosse qualcosa con i driver proprietari infatti quando li ho disinstallati almeno su gnome ora posso andare tranquillamente.. però su kde no... è ancora lenta..
forse qualcuno ci è già passato e ha qualche consiglio?
vi ringrazio!!

Non avendo mai provato mandriva e neanche una 3450 non so aiutarti da vicino. Cmq prova a postare xorg.conf così com'è al momento e vediamo che driver usa.

Una domanda. Ma quando hai installato i driver propietari è stato configurato xorg? Non conoscendo mandriva non so se sono inclusi nella distribuzione. Se si allora dovrebbe configurarlo in automatico. Se no allora bisogna configurarli dopo l'installazzione.

Slayer86
06-11-2009, 20:54
Ciao grazie della risposta.
Si in effetti, l'accellerazione video è attiva, pero' come mai alcune aplicazioni, tipo cairo dock, non funzionano sotto open-gl? sto'facendo confusione?:muro:

Se dando in shell il comando glxinfo | grep rendering hai come risposta yes...
allora la domanda successiva sarà... hai attivato gli effetti desktop?:D

darkbasic
08-11-2009, 23:00
Stasera ho reinstallato gentoo sul fisso, si torna a giocare con i driver open per R600 e mesa git head :D

Attualmente uso il kernel 2.6.32-rc6-git3, mesa git, libdrm git, xf86-video-ati git, xserver 1.7.1. Posseggo una Radeon HD 3870 (R600). Come facciano quelli di phoronix a dire che si riesca a giocare fluidamente ad openarena e a nexuiz alla massima risoluzione io non lo so. Con kms off, desktop effects off, risoluzione 640x480 e effetti al minimo openarena scattona da far schifo ed è assolutamente ingiocabile. nexuiz si fa fatica addirittura a premere il pulsante esci dopo averlo avviato... :muro:

darkbasic
09-11-2009, 14:05
Section "Module"
Load "glx"
Load "dri"
EndSection

Section "Device"
Identifier "HD3870" # your alias
Driver "radeon"
Option "AccelMethod" "XAA"
# XAA/EXA
Option "AccelDFS" "1"
# 1/0 On for PCIE, off for AGP
# Manpage: Use or don't use accelerated EXA DownloadFromScreen hook
# when possible.
#Option "AGPMode" "1"
# 1-8 Does not affect PCIE models.
#Option "AGPFastWrite" "1"
# 1/0 Does not affect PCIE models. Not recommended.
Option "GARTSize" "64"
# 0-64 Megabytes of gart (system) memory used.
# Wrongly defaults to 8MB sometimes, see your logfile.
# Bigger seems better.
Option "EnablePageFlip" "1"
# 1/0 Increases 3D performance substantially
# seemingly in XAA mode only
Option "ColorTiling" "1"
# 1/0 Increases 3D performance substantially
# affected stability only positively on my system
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

Poche insignificanti righe vogliono dire fare 60 fps@2560x1600 a nexuiz :eek:

Slayer86
09-11-2009, 14:35
Section "Module"
Load "glx"
Load "dri"
EndSection

Section "Device"
Identifier "HD3870" # your alias
Driver "radeon"
Option "AccelMethod" "XAA"
# XAA/EXA
Option "AccelDFS" "1"
# 1/0 On for PCIE, off for AGP
# Manpage: Use or don't use accelerated EXA DownloadFromScreen hook
# when possible.
#Option "AGPMode" "1"
# 1-8 Does not affect PCIE models.
#Option "AGPFastWrite" "1"
# 1/0 Does not affect PCIE models. Not recommended.
Option "GARTSize" "64"
# 0-64 Megabytes of gart (system) memory used.
# Wrongly defaults to 8MB sometimes, see your logfile.
# Bigger seems better.
Option "EnablePageFlip" "1"
# 1/0 Increases 3D performance substantially
# seemingly in XAA mode only
Option "ColorTiling" "1"
# 1/0 Increases 3D performance substantially
# affected stability only positively on my system
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

Poche insignificanti righe vogliono dire fare 60 fps@2560x1600 a nexuiz :eek:

evidentemente non troppo insignificanti :D

Dane
15-11-2009, 20:56
dal blog di uno sviluppatore gentoo:

http://gentooexperimental.org/~patrick/weblog/archives/2009-11.html#e2009-11-15T19_08_48.txt


dice che può usare tranquillamente l'openGL in kde4..... io spero di poter avere il compositing funzionante.

Però farò tra un po' di tempo.... troppe novità insieme e non ho voglia di ricompilare ogni giorno....

Da voi come va?
Qualche novità?

darkbasic
15-11-2009, 22:17
E' sufficiente smascherare molte meno cose... Questo è il mio package.keywords ma tenete conto che uso xserver 1.7!

/etc/portage/package.keywords/x11
>=x11-base/xorg-server-1.7.1
>=x11-base/xorg-drivers-1.7
>=x11-base/xorg-x11-7.5
=media-libs/mesa-9999
=x11-libs/libdrm-9999
=x11-drivers/xf86-video-ati-9999
>=x11-drivers/xf86-input-evdev-2.3.0
>=x11-drivers/xf86-input-keyboard-1.4.0
>=x11-drivers/xf86-input-mouse-1.5.0

>=app-admin/eselect-opengl-1.0.9

>=x11-proto/fixesproto-4.1
>=x11-proto/xextproto-7.0.99.3
>=x11-proto/xf86vidmodeproto-2.2.99.1
>=x11-proto/renderproto-0.11
>=x11-proto/recordproto-1.13.99.1
>=x11-proto/inputproto-1.9.99.902
>=x11-proto/xineramaproto-1.1.3
>=x11-proto/bigreqsproto-1.1.0
>=x11-proto/xf86driproto-2.1.0
>=x11-proto/xf86dgaproto-2.0.99.1
>=x11-proto/xcmiscproto-1.2.0

#blocking
>=x11-libs/libXext-1.0.99
>x11-libs/libXi-1.2.99
>x11-libs/libXxf86vm-1.0.99.1
>=x11-libs/libXtst-1.0.99.2
>=x11-libs/libXxf86dga-1.0.99.1

#needed by blockers
>=x11-proto/xproto-7.0.16
>=x11-libs/libX11-1.3

#upgrade
media-fonts/font-util

In realtà bastano mesa-9999, libdrm-9999 e xf86-video-ati-9999 (e le dipendenze del caso, come ~font-utils).

Inoltre serve un kernel >=2.6.32-rc7, oppure 2.6.31+drm-next (consiglio zen-sources con use drm-next ma personalmente uso 2.6.32-rc7-git+drm-next).

Lo xorg.conf che ho postato precedentemente non serve più.

Che dire, consigliatissimo... gli effetti di kde sono fluidissimi e gioco tranquillamente a nexuiz alla risoluzione di 2560x1600. :D

AnonimoVeneziano
15-11-2009, 23:42
Qualcuno che segue lo sviluppo sa di un ETA per il supporto almeno 2D delle schede nuove basate su RV8xx ?

darkbasic
16-11-2009, 03:19
So soltanto che non ci sarà moltissimo lavoro da fare perché l'architettura è simile ad R600...

bbelze
17-11-2009, 10:37
ma perchè usare XAA al posto di EXA? Non dovrebbe essere più performante EXA? poi mi sbaglio...però...boh...

marczxc
21-11-2009, 00:45
ragazzi sono un niubbo, non mi linciate...

ho appena installato ubuntu e i driver della mia 4890, compreso il control center. ma nelle sue opzioni non c'è quella per modificare le frequenze in idle e in load, come posso risolvere?

Slayer86
07-12-2009, 00:11
ragazzi sono un niubbo, non mi linciate...

ho appena installato ubuntu e i driver della mia 4890, compreso il control center. ma nelle sue opzioni non c'è quella per modificare le frequenze in idle e in load, come posso risolvere?

sorry ma qui parliamo dei driver open! ;)

che hanno superato in popolarità i driver catalix http://www.phoronix.com/scan.php?page=news_item&px=Nzc3NQ:D :D :D

ovviamente siamo indietro come funzionalità rispetto ai dirver closed come anche scritto nell'articolo però i dirver open stanno migliorando ad una velocità spaventosa!!!!

kurts
08-12-2009, 20:07
salve a tutti!
mi rivolgo a voi nella speranza di ottenere qualche consiglio che possa far si che anche io riesca ad eseguire qualche piccola applicazione 3d con la mia modestissima radeon 9200PRO
ormai non so davvero più dove sbattere la testa, credo di aver provato tutte le strade percorribili ma, evidentemente, non è così visto che anche solo neverputt fa fatica a girare!!

dunque, un po' di informazioni utili:
lspci |grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)

glxinfo |grep render
direct rendering: Yes
OpenGL renderer string: Software Rasterizer

ora voi mi direte: "beh? è attiva l'accelerazione, che vuoi?"
mi scuserete se non credo a questo risultato di glxinfo se poi mi trovo di fronte a questo:
293 frames in 5.0 seconds = 58.581 FPS
299 frames in 5.0 seconds = 59.638 FPS
297 frames in 5.0 seconds = 59.394 FPS
ma come? il computer che usano i miei ha una geForce qualcosa e con il direct rendering off fa 100-110 FPS!!!

dalla disperazione ho addirittura effettuato il passaggio da lenny a squeeze nella speranza che tutto si sistemasse ma niente, anzi, la situazione sembra peggiorata, prima facevo almeno il doppio dei FPS e non mi diceva "Software Rasterizer" (che da quello che ho letto è un male) ma Mesa qualche-cosa (scusate, non ricordo esattamente)

ora sto cercando di compilare da me le librerie mesa ma a dire il vero ho qualche problema.

se vi interessa il mio xorg.xonf eccolo qui:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection

Section "Module"
# Load "dbe"
# Load "dri"
# Load "dri2"
# Load "extmod"
# Load "glx"
# Load "record"
Load "dbe"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
Load "drm"
Load "radeon"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" "PCI" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
Option "AGPMode" "4" # <i>
Option "AGPFastWrite" "1" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
Option "EnablePageFlip" "1" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
Option "ColorTiling" "1" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
Option "RenderAccel" "1" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
Option "AccelMethod" "XAA" # XAA oppure EXA
Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Option "XAANoOffscreenPixmaps" "1"
Option "AllowGLXWhithComposite" "1"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV280 [Radeon 9200 PRO]"
BusID "PCI:1:0:0"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card1"
Driver "radeonhd"
VendorName "Gammagraphx, Inc. (or missing ID)"
BoardName "Unknown Board"
BusID "PCI:0:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection
non uso quello automatico perchè mi da problemi con la risoluzione.
questo l'ho generato con X -configure e poi l'ho modificato qua e la.

qui c'è il /var/log/Xorg.o.log

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.8-dsa-ia32 i686 Debian
Current Operating System: Linux miticuzzo 2.6.30-2-686 #1 SMP Sat Sep 26 01:16:22 UTC 2009 i686
Build Date: 13 October 2009 11:25:51AM
xorg-server 2:1.6.5-1 (buildd@murphy.debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 8 20:35:02 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x6c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:5960:1043:0062 ATI Technologies Inc RV280 [Radeon 9200 PRO] rev 1, Mem @ 0xf0000000/134217728, 0xdf000000/65536, I/O @ 0x0000d800/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 6.12.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Reloading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEON(0): TOTO SAYS 00000000df000000
(II) RADEON(0): MMIO registers at 0x00000000df000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "AGPFastWrite" "1"
(**) RADEON(0): Option "EnablePageFlip" "1"
(**) RADEON(0): Option "ColorTiling" "1"
(**) RADEON(0): Option "RenderAccel" "1"
(**) RADEON(0): Option "AccelMethod" "XAA"
(**) RADEON(0): Option "DRI"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon 9250 5960 (AGP)" (ChipID = 0x5960)
(--) RADEON(0): Linear framebuffer at 0x00000000f0000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.30.0
(**) RADEON(0): Page Flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 240.000000, mclk: 200.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=20000
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Found color CRT connected to primary DAC
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
finished output detect: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Found color CRT connected to primary DAC
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 1
(II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x960" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) RADEON(0): Not using default mode "832x624" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1440x900" (hsync out of range)
(II) RADEON(0): Not using default mode "1600x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1920x1080" (hsync out of range)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) RADEON(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
(II) RADEON(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1024x768
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEON(0): RADEONScreenInit f0000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xf7fff000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1360) to (1408,1362)
(II) RADEON(0): Largest offscreen area available: 1408 x 6829
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1d64000
(II) RADEON(0): Will use depth buffer at offset 0x24b2000
(II) RADEON(0): Will use 86016 kb for textures at offset 0x2c00000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xf0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(WW) RADEON(0): [agp] AGP not available
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
(II) RADEON(0): [agp] You may want to make sure the agpgart kernel module
is loaded before the radeon kernel module.
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xe882b000 at 0xb7c77000
(II) RADEON(0): [drm] Closed DRM master.
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xf7fff000 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): Render acceleration enabled
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "1"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00750c00
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00754e00
(II) RADEON(0): Largest offscreen area available: 1408 x 6823
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 63500000
best_freq: 63500000
best_feedback_div: 127
best_ref_div: 9
best_post_div: 6
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xf7fff000 0xf7fff000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "AllowGLXWhithComposite" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "it"
(II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4"
(II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0
(II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
(II) RADEON(0): Found color CRT connected to primary DAC
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 1
(II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x960" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) RADEON(0): Not using default mode "832x624" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1440x900" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1024" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1080" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
(II) RADEON(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): Found color CRT connected to primary DAC
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 1
(II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x960" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) RADEON(0): Not using default mode "832x624" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1440x900" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1024" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1080" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
(II) RADEON(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): Found color CRT connected to primary DAC
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 1
(II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x960" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) RADEON(0): Not using default mode "832x624" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1440x900" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1600x1024" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1080" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1200" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) RADEON(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) RADEON(0): Printing probed modes for output VGA-0
(II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
(II) RADEON(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
avrete notato sicuramente gli errori dell'agp, è questo il motivo per cui non funziona l'accelerazione, ma allora come più dirmi che è attiva?

ringrazio in anticipo chiunque voglia darmi una mano, buona serata a tutti!

McB
08-12-2009, 20:13
Che distribuzione usi?
Se debian/ubuntu installa il pacchetto firmware-linux dovrebbe tornare a funzionare il tutto.

kurts
08-12-2009, 20:17
sisi, uso debian squeeze.
il pacchetto da te indicato l'ho gia installato eppure mi ritrovo in questa situazione penosa...
$ dpkg -l|grep firmware
ii firmware-linux 0.18 Binary firmware for various drivers in the Linux kernel

McB
08-12-2009, 20:19
Posta l'output di dmesg che vediamo se c'è altro.

McB
08-12-2009, 20:22
Uff. Ho saltato una cosa importante. Non avevo notato che usi i driver radeonhd. Metti radeon e basta.

kurts
08-12-2009, 20:32
radeonhd?? nono, io uso solo i driver radeon, ho anche provato con gli ati ma non cambia nulla.

ma vuoi tutto l'output di dmesg o solo il log?

edit:
si, hai ragione mi sono accorto anche io adesso che me lo hai detto, non so perchè ma per la seconda uscita mi mette radeonhd... sistemato con radeon, scusami

McB
08-12-2009, 20:41
Ops. visto ora che hai due sezioni distinte. per sbaglio son finito su quella sbagliata. Cmq non vorrei che a creare casino è il fatto che su un ID hai radeon e sul altro hai radeonhd. Prova a commentare tutta la sezione dove hai radeonhd. Cmq ormai in squeeze tutte quelle voci sono praticamente inutili. Carica tutto in automatico.

Intanto posta solo
dmesg | grep drm
e
dmesg | grep agp

kurts
08-12-2009, 20:48
ecco il dmesg|grep drm:
$ dmesg |grep drm
[ 19.844139] [drm] Initialized drm 1.1.0 20060810
[ 19.861767] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
[ 20.283286] [drm] Setting GART location based on new memory map
[ 20.283720] [drm] Loading R200 Microcode
[ 20.345043] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!

ed quello per l'agp:
$ dmesg |grep agp
[ 19.771967] Linux agpgart interface v0.103

inoltre ho notato una cosa moooooolto strana (imho)
$ dmesg |grep radeon
[ 19.861767] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
[ 20.283728] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[ 20.345034] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[ 20.345043] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!

ma il file è installato come si deve:
$ dpkg -L firmware-linux | grep R200_cp.bin
/lib/firmware/radeon/R200_cp.bin

-----EDIT-----
nel frattempo ho rimosso tutte le sezioni doppie da xorg.conf (quelle per il secondo schermo, per la seconda uscita ecc...)

McB
08-12-2009, 20:55
Intanto abbiamo scoperto il motivo del errore ora però dobbiamo risolverlo.
Hai già provato a disinstallare il pacchetto e poi reinstallarlo?

kurts
08-12-2009, 20:59
Intanto abbiamo scoperto il motivo del errore ora però dobbiamo risolverlo.
Hai già provato a disinstallare il pacchetto e poi reinstallarlo?

no, lo faccio subito, riavvio X e poi riposto i log

-----EDIT POST-RIAVVIO-----
niente di nuovo, tutto come prima, anche se a quanto pare ho guadagnato 2 FPS, non so come però:
305 frames in 5.0 seconds = 60.882 FPS
303 frames in 5.0 seconds = 60.533 FPS
307 frames in 5.0 seconds = 61.354 FPS

McB
08-12-2009, 21:12
Adesso ho potuto controllare anch'io.Avevo aptitude sotto i ferri per gli aggiornamenti. 130 oggi. Ho paura che domani non parta più niente :P
Cmq il pacchetto firmware-linux è proprio il 0.18 e da me funziona regolarmente.

kurts
08-12-2009, 21:17
vuoi dire che è il pacchetto buggato?

McB
08-12-2009, 21:24
Oddio non so. Cioè da me deve caricare il 520 e lo fa regolarmente da quando l'ho installato. Sto cercando in internet se qualcuno ha questo problema ma il 0.18 ormai è da tempo che è in squeeze e qualcuno avrebbe dovuto accorgersi se non funziona. Se vuoi posso passarti il .bin che ho installato io con quel pacchetto anche se dubito che funzionerà. Ho come la sensazione che lui lo cerchi nel posto sbagliato.

kurts
08-12-2009, 21:34
ahahah questa è bella!!!
ho riavviato il pc, ho rilanciato glxgears e:
364 frames in 5.0 seconds = 72.687 FPS
365 frames in 5.0 seconds = 72.838 FPS
363 frames in 5.0 seconds = 72.464 FPS

adesso provo a scaricarmi il pacchetto direttamente dal sito di debian e se non risolvo nememno così proverò con quello di sid, ormai tanto vale provarle tutte!

Ho come la sensazione che lui lo cerchi nel posto sbagliato.
potrebbe essere, ma il path che si vede dal log e quello nel quale è installato è lo stesso, la cosa è davvero strana...

McB
08-12-2009, 21:39
Ho dato una controllatina. Con glxgears tu al momento fai più frame di me. Ma io ho compiz attivo. Prova a rivedere dmesg. Magari adesso lo carica.

A memoria però ne facevo molti di più una volta. Magari c'è installato un pacchetto di troppo però da me i giochi vanno.


Adesso che mi viene in mente. Ho smanettato con driconf ultimamente. Probabilmente ho spostato qualche parametro che lo rende più pesante.

kurts
08-12-2009, 21:56
non ci credo, ho scaricato il pacchetto dal sito di debian e l'ho installato, ora carica il firmware.
nonosctante questa bella notizia non è cambiato nulla, a parte il fatto che non mi da più quei brutti errori.
boh...
ho provato anche io con driconf ma:
Could not detect any configurable direct-rendering capable devices. DRIconf will be started in expert mode.

con lenny driconf andava.

McB
08-12-2009, 22:07
A questo punto non vorrei che sia lo xorg.conf che da problemi. Fatti un backup e poi prova con questo.

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "AGPMode" "8"
Option "RenderAccel" "on"
Option "MigrationHeuristic" "greedy"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection

Magari ci sono da sistemare un paio di voci ma tentar non nuoce. Devi vedere se hai l'agp 8x oppure 4x in caso modificalo prima di riavviare.

Ora direi che mi avvio verso il letto che domani sveglia presto. Si ricomincia a lavorare.

kurts
08-12-2009, 22:12
si, la scheda è 8X ma la mobo solo 4X purtroppo.
ti ringrazio per tutto l'aiuto che mi hai dato e buona notte!

-----EDIT-----
nessun cambiamento, neverputt va sempre a scatti...

kurts
09-12-2009, 19:57
dunque, tanto per cominciare ho notato che i filmati si vedono come si deve, anche i film ed anche a schermo intero, pertroppo le animazioni in flash, quelle un po' più pesanti ed i filmati di youtube, veoh ecc vanno sempre a scatti.

continuando a cercare qua e la ho però trovato questa (http://wiki.debian.org/XF86DRTShoot) guida, ad un certo punto si dice che se il comando:
dmesg | grep drm
restituisce più di una riga come output vuol dire che sono caricati più moduli per il drm che potrebbero andare in conflitto.
la soluzione potrebbe essere, sempre secondo la guida, una ricompilazione del kernel che escluda il modulo drm interno al kernel stesso.
ora, visto che non vedo altre possibili soluzioni, mi ricompilerò sto benedetto kernel (così colgo l'occasione per alleggerirlo un po).

voi cosa dite? può funzionare?

McB
09-12-2009, 20:10
Eccomi di ritorno. :D

A dire il vero non saprei. Da me ha sempre fatto vedere più di una riga ma l'accelerazione hardware funziona e posso anche giocare.

se do il comando lsmod | grep drm
drm 172672 3 radeon
i2c_core 25456 2 drm,i2c_nforce2

mi sembra di capire che venga caricato il giusto e non più moduli.

In xorg.conf prova a commentare Option "MigrationHeuristic" "greedy"
e mettere l'accelerazione su XAA
vediamo se apporta miglioramenti.

kurts
09-12-2009, 21:08
no, con XAA e senza l'altra riga peggiora la situazione:
278 frames in 5.0 seconds = 55.548 FPS
300 frames in 5.0 seconds = 59.881 FPS
299 frames in 5.0 seconds = 59.799 FPS

ho appena finito di configurare il kernel, adesso provo a compilarlo e vedremo...

Gimli[2BV!2B]
09-12-2009, 22:08
Queste impostazioni mi hanno dato le massime prestazioni con la mia 9600SE:Section "Device"
Identifier "Radeon 9600SE"
Driver "radeon"
Option "AGPMode" "4"
Option "AccelMethod" "EXA"
Option "EXAVSync" "true" #questa opzione va disabilitata quando si misurano i frame
Option "EnablePageFlip" "true"
Option "backingstore" "true"
Option "AccelDFS" "true" #alcuni bridge AGP non sono stabili con questa opzione
Option "MigrationHeuristic" "greedy"
EndSection

Ah, con il kernel 2.6.32 ho notato che il direct rendering era disattivato.
Probabilmente è una questione di driver Xorg non sufficientemente recenti per gestire il Kernel Mode-Setting correttamente (ma non mi sono ancora interessato alla cosa, ho utilizzato il kernel 31).

Il kernel Mode-Setting è stato introdotto nel kernel 2.6.31 per le schede ATI (http://kernelnewbies.org/Linux_2_6_31#head-78158343fc06e5e289f2ccaf51d6a30090a46524), ma era ancora abbastanza immaturo e copriva solo le schede più vecchie.
Nel kernel 2.6.32 il KMS è stato introdotto per varie schede ATI medio-recenti, con vari miglioramenti sul codice preesistente. (http://kernelnewbies.org/Linux_2_6_32#head-ae644076d6ac6fe7dd55dbb543088cd789aa5952) E' ancora immaturo ma sta crescendo.

Ipotesi: forse per la tua scheda il KMS è attivo/(troppo invadente) già con il kernel 2.6.31 creandoti questi problemi?
Riesci ad installare e provare un kernel 2.6.30?

kurts
09-12-2009, 23:03
si, adesso sto proprio usando il .30, ho anche installato il .26 ma non cambia niente.
il .30 lo avevo gia installato da qualche giorno perchè avevo gia letto da qualche parte quello che riporti anche tu nel tuo post.

ora ho appena riavviato con il .30 ricompilato da me ma ottengo messaggi strani e mi si blocca anche in rescue mode, probabilmente, anzi, sicuramente ho eliminato qualcosa da non eliminare...
non dovevo usare gconfig, fa un po' pena...:D

secondo me i casi sono due:
-non sono installate tutte le librerie necessarie
-la scheda è buggata

mi sento di escludere i problemi HW visto che sulla stessa macchina ho installato anche XP e tutto va come dovrebbe.

-----EDIT-----
wow, nuovi errori, forse la situazione migliora piano piano:
dmesg | grep agp
[ 1.449707] Linux agpgart interface v0.103
[ 1.604136] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 1.604211] agpgart-intel 0000:00:00.0: can't determine aperture size
[ 1.604257] agpgart-intel 0000:00:00.0: agp_backend_initialize() failed
[ 1.604311] agpgart-intel: probe of 0000:00:00.0 failed with error -22

forse prima non riconosceva il mio bridge AGP, ora mi pare di capire che almeno li ci siamo, non determina l'aperture size, am questo lo posso specificare io in xorg.conf, mi do da fare.

secondo me il problema più grave (alla faccia del warning, io lo ritengo un CRITICAL FAILURE!!) rimane questo:
[CODE]$ cat /var/log/Xorg.0.log|grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) RADEON(0): [agp] AGP not available
(WW) RADEON(0): Direct rendering disabled[/CODE

Gimli[2BV!2B]
09-12-2009, 23:44
Mi ero auto-convinto che tu avessi il 31 installato.

Prima non l'avevi controllato il dmesg, quindi l'errore probabilmente era già lì in attesa di essere visto?
Mah... facciamo così, prima ti ho consigliato di scartare il 31, ora ti proporrei di provarlo :D : in Sid c'è linux-image-2.6.31-1-686

Installi, riavvi, dai un'occhiata a xorg.0.log, se c'è l'errore dai un'occhiata al dmesg, se è tutto come col trenta torna indietro.

kurts
09-12-2009, 23:53
no, il dmesg|grep agp lo avevo gia controllato, ti rimando al post 139 a tal proposito.
comunque provare il .31 non mi costa niente, ora lo installo tengo le dita incrociate!

nel frattempo riesci a postarmi il tuo "glxinfo|grep render" ?
volevo sapere se sono l'unico ad avere Software Rasterizer, grazie

kurts
10-12-2009, 00:07
OOOOOOOOOOOOOOOOOOOOOOOOOOOO

FERMI TUTTI!!!!
ATTENZIONE!!!!!!!!

cominciamo con questo:
$ glxinfo |grep render
direct rendering: Yes
OpenGL renderer string: Mesa DRI R200 (RV280 5964) 20090101 AGP 4x x86/MMX/SSE2 TCL

e poi:
$ glxgears
4612 frames in 5.0 seconds = 922.346 FPS
4757 frames in 5.0 seconds = 951.384 FPS
4830 frames in 5.0 seconds = 965.898 FPS
4929 frames in 5.0 seconds = 985.717 FPS

cosa faccio adesso????
ho paura...
devo provare a giocare???

Gimli[2BV!2B]
10-12-2009, 00:18
Mi dispiace, al momento posso raggiungere quel pc solo in ssh ed ha collegato giusto un cavo di rete e la spina... forse domani sera...

Ho l'ultimo Xorg.0.log (ho tolto l'elenco infinito di schede supportate):
X.Org X Server 1.7.3
Release Date: 2009-12-3
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r6 i686
Current Operating System: Linux kwankey 2.6.31-gentoo-r6 #8 PREEMPT Sun Nov 29 14:32:15 CET 2009 i686
Kernel command line: root=/dev/hda3 ro rootfstype=ext4 acpi_enforce_resources=lax quiet
Build Date: 03 December 2009 08:00:50PM

Current version of pixman: 0.17.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 6 14:59:13 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen" (0)
(**) | |-->Monitor "Philips 170S4"
(**) | |-->Device "Radeon 9600SE"
(**) |-->Input Device "Mouse"
(**) |-->Input Device "Keyboard"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Not automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x81ec800
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 4

(--) PCI:*(0:1:0:0) 1002:4151:174b:7c20 ATI Technologies Inc RV350 AQ [Radeon 9600] rev 0, Mem @ 0xc0000000/268435456, 0xe5000000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
(--) PCI: (0:1:0:1) 1002:4171:174b:7c21 ATI Technologies Inc RV350 AQ [Radeon 9600] (Secondary) rev 0, Mem @ 0xd0000000/268435456, 0xe5010000/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.5.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon 9600SE AQ (AGP)
(II) Primary Device is: PCI 01@00:00:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) RADEON(0): TOTO SAYS 00000000e5000000
(II) RADEON(0): MMIO registers at 0x00000000e5000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "EnablePageFlip" "true"
(**) RADEON(0): Option "AccelDFS" "true"
(**) RADEON(0): Option "IgnoreEDID" "true"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "EXAVSync" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon 9600SE AQ (AGP)" (ChipID = 0x4151)
(--) RADEON(0): Linear framebuffer at 0x00000000c0000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(**) RADEON(0): Page Flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 19600, sclk: 324.000000, mclk: 196.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=19600
(II) RADEON(0): DFP table revision: 3
(II) RADEON(0): Output VGA-0 using monitor section Philips 170S4
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: PAL
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): Port2:
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:DDC control interface" registered at address 0x6E.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1280x1024@75
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit c0000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xc7ffc000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 131072 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00500000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00504000
(II) RADEON(0): Will use 5120 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 5120 kb for back buffer at offset 0x00508000
(II) RADEON(0): Will use 5120 kb for depth buffer at offset 0x00a08000
(II) RADEON(0): Will use 57344 kb for textures at offset 0x00f08000
(II) RADEON(0): Will use 58336 kb for X Server offscreen at offset 0x04708000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(**) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x1039/0x0745; Card 0x1002/0x4151 0x174b/0x7c20]
(II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xa70ef000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xa70ee000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x9ee4b000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0x9d1cb000
(II) RADEON(0): [drm] register handle = 0x2ca00000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xc7ffc000 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Option "BackingStore" "true"
(**) RADEON(0): Backing store enabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xc7ffc000 is: 0xc7ffc000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe1ffe000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xc7ffc000 0xc7ffc000
(II) RADEON(0): MC_AGP_LOCATION : 0xe1ffe000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) RADEON(0): EXA VSync enabled
(II) RADEON(0): num quad-pipes is 1
(**) RADEON(0): Option "MigrationHeuristic" "greedy"
(II) EXA(0): Offscreen pixmap area of 59736064 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 135000000
best_freq: 135000000
best_feedback_div: 20
best_ref_div: 2
best_post_div: 2
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xc7ffc000 0xc7ffc000
(II) RADEON(0): MC_AGP_LOCATION : 0xe1ffe000
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 270
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse: Device: "/dev/input/mice"
(**) Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse: ZAxisMapping: buttons 4 and 5
(**) Mouse: Buttons: 9
(**) Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
(**) Mouse: (accel) keeping acceleration scheme 1
(**) Mouse: (accel) acceleration profile 0
(II) Mouse: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard: Protocol: standard
(**) Option "XkbRules" "xorg"
(**) Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Keyboard: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
(II) RADEON(0): Damage tracking initialized for page flipping
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) 3rd Button detected: disabling emulate3Button
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
Da come si comportava e stando a quel che si legge l'accelerazione era attiva.

Gimli[2BV!2B]
10-12-2009, 00:21
Oh, bene, finalmente sembra funzionare!
Ora vado a dormire, ciao!

kurts
10-12-2009, 00:23
;30016247']Oh, bene, finalmente sembra funzionare!
Ora vado a dormire, ciao!
grazie mille, ti ringrazio infinitamente, direi che ti sei guadagnato una bella dormita!
ciao!!

kurts
10-12-2009, 21:10
bene, anzi no, male, la situazione è tornata come prima...
non so se ridere o piangere... o buttare il computer dalla finestra

un'informazione, ma il pacchetto "libdrm-radeon1" esattamente cos'è?
da quello che so dovrebbero essere i moduli drm per i vari chipset radeon ma anche installandolo (preso in prestito da ubuntu) me lo segnala cone libreria orfana, quindi inutile...

Gimli[2BV!2B]
10-12-2009, 21:49
C'è poco da fare: sono in atto cambiamenti importanti, ci vorrà qualche tempo prima che tutto si assesti... (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=558786)

Però almeno una volta tutto ha funzionato :stordita:, se dall'ultima volta non hai cambiato nulla temo che sia uno di quegli odiosi bug provocati da inattese sequenze di avvenimenti, quindi qualcosa di difficile da rintracciare, che non capita sempre e che magari succede solo con particolari configurazioni hardware...
Unica domanda, stupida, ma mi è capitato: hai avviato lo stesso kernel di ieri, vero?

kurts
10-12-2009, 22:01
essì, è come dici tu, da ieri ho installato solo openoffice, nient'altro.
questo pomeriggio andava ancora tutto perfettamente, beh, insomma, si fa per dire, gia extremetuxracer andava a scatti, comunque, voglio dire, l'accelerazione c'era.
dopo cena riaccendo il PC per vedere di finire sta presentazione con openoffice e noto che qualcosa non va, glxgears e toh, come qualche giorno fa!

si, ho sempre usato il kernel .31, non perchè non abbia pensato di provare gli altri, più che altro per scaramanzia!!:D
ora tanto vale provare anche il .30 ed il .26

comunque hai ragione, per mezza giornata ho potuto liberare tutta la potenza renderizzatrice della mia 9200pro!!! lol

Slayer86
11-12-2009, 17:06
Sto facendo un po di esperimenti con il KMS...
Ho il kernel 2.6.32 solo che non riesco a ottenere un sistema usabile con il KMS attivo...

In pratica mi becco un
OpenGL renderer string: Software Rasterizer
col comando glxinfo...

quindi tutto ultra scattosissimo!

Ho mesa 7.5.2 driver radeon ultima versione stabile e il drm compilato nel kernel

cosa ho sbagliato??? mi servono pacchetti più nuovi? drm non del kernel? cosa c'è che non va???

kurts
11-12-2009, 20:51
guarda, dato tutto quello che sto passando io ti posso dire con certezza quasi matematica che non hai sbagliato niente.
come avrai letto dai miei post precedenti anche io avevo questo problema e dopo giorni di problemi si è risolto tutto con un semplice cambio di kernel, poi è ritornato al software rasterize senza motivo ed oggi, anci, meglio dire adesso, è ritornata attiva l'accelerazione come si deve... anche se con circa 50FPS in meno dell'altra volta, prima sfioravo i 1000 ora invece sto sui 940-960.

come dice Gimli[2BV!2B] sarà qualche strana congiunzione astrale, l'influenza della luna, l'avvicinarsi del natale o chissà che altro...

Slayer86
11-12-2009, 20:57
guarda, dato tutto quello che sto passando io ti posso dire con certezza quasi matematica che non hai sbagliato niente.
come avrai letto dai miei post precedenti anche io avevo questo problema e dopo giorni di problemi si è risolto tutto con un semplice cambio di kernel, poi è ritornato al software rasterize senza motivo ed oggi, anci, meglio dire adesso, è ritornata attiva l'accelerazione come si deve... anche se con circa 50FPS in meno dell'altra volta, prima sfioravo i 1000 ora invece sto sui 940-960.

come dice Gimli[2BV!2B] sarà qualche strana congiunzione astrale, l'influenza della luna, l'avvicinarsi del natale o chissà che altro...

ma tu hai il kms attivato? io ho quel problema solo con il Kms attivo altrimenti funziona tutto bene!

slacker
11-12-2009, 21:15
Ho mesa 7.5.2 driver radeon ultima versione stabile e il drm compilato nel kernel

Se vuoi avere un kms che funzioni decentemente metti mesa-9999 libdrm >= 2.4.16, xf86-video-ati-9999, il kernel va bene il 2.6.32

kurts
11-12-2009, 21:20
hai ragione, scusami, pensavo stessi provando il KMS perchè avevi dei problemi con la normale configurazione.
comunque no, io non uso il KMS, da quello che ne so per ora sono supportate solo le schede con chipset intel

Slayer86
11-12-2009, 21:34
Se vuoi avere un kms che funzioni decentemente metti mesa-9999 libdrm >= 2.4.16, xf86-video-ati-9999, il kernel va bene il 2.6.32

ok! è questo che mi serviva sapere...
altra cosa... perchè se attivo l'overlay x11 mi vede come aggiornamento solo mesa 7.6? i pacchetti sono tutti nel packages.keyword quindi dovrebbe aggiornare tutto!

hai ragione, scusami, pensavo stessi provando il KMS perchè avevi dei problemi con la normale configurazione.
comunque no, io non uso il KMS, da quello che ne so per ora sono supportate solo le schede con chipset intel

il kms per intel è stabile e presente nel kernel da diverse relase... dalla 2.6.31 è presente anche per le schede ati (fino a r500... nel 2.6.32 anche per r600e 700) però è supportato in modo sperimentale ancora...

Slayer86
11-12-2009, 21:56
ho aggiunto l'overlay x11 e adesso faccio gli aggiornamenti di mesa e libdrm... vi tengo aggiornati!

Slayer86
12-12-2009, 11:04
Allora ho installato mesa-7.7_rc2 e libdrm-2.4.16... con il kms non ho avuto affatto successo tutto esattamente come prima!
Ora però doom3 funziona quasi... quasi perchè chiaramente alcuni effetti grafici non sono tutt'ora gestiti correttamente ed altri non sono gestiti proprio... quindi scatta da paura inquadrando determinati oggetti mentre altri no... cmq gran passo avanti!

kurts
12-12-2009, 11:25
il kms per intel è stabile e presente nel kernel da diverse relase... dalla 2.6.31 è presente anche per le schede ati (fino a r500... nel 2.6.32 anche per r600e 700) però è supportato in modo sperimentale ancora...

io con il kernel .31 non ce l'ho attivo, tant'è che se faccio
modprobe radeon modeset=1
si lamenta che il parametro modeset è sconosciuto.
forse perchè uso il kernel pacchettizzato debian ed il KMS non era ancora stato aggiunto?

però col .32 tutto sembra funzionare, dico sembra perchè mi da sempre "software rasterizer", a patto che smonti a mano il modulo radeon per poi ricaricarlo col parametro modeset=1, se invece creo il file
/etc/modprobe.d/radeon-kms.conf
per l'avvio automatico mi si pianta al momento di caricare GDM... boh

ma questi scatti ti sono sorti solo adesso usando il KMS oppure anche prima doom3 ti dava problemi?
noti dei miglioramenti rispetto alla modalità user classica?

slacker
12-12-2009, 12:28
Allora ho installato mesa-7.7_rc2 e libdrm-2.4.16... con il kms non ho avuto affatto successo tutto esattamente come prima!
Ora però doom3 funziona quasi... quasi perchè chiaramente alcuni effetti grafici non sono tutt'ora gestiti correttamente ed altri non sono gestiti proprio... quindi scatta da paura inquadrando determinati oggetti mentre altri no... cmq gran passo avanti!

Posta i vari log: xorg.0.log, dmesg... anche su pastebin volendo.
A me sulla radeon X1400 + KMS va da dio.
Non è normale che hai:
OpenGL renderer string: Software Rasterizer

Slayer86
12-12-2009, 14:29
Posta i vari log: xorg.0.log, dmesg... anche su pastebin volendo.
A me sulla radeon X1400 + KMS va da dio.
Non è normale che hai:

Appena ho un secondo ti posto tutto... cmq avevo controllato e non mi pareva ci fossero errori! :D
Cmq ci sta che non funzioni perfettamente è tutto in super-sviluppo!

Slayer86
13-12-2009, 15:49
Allora... avviando con il kernel 2.6.32 con KMS ativo mi becco questo errore nel log di xorg :
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
[dri] radeon kernel module version is 2.0.0 but version 1.17.0 or newer is needed.
[dri] Disabling DRI.

Penso sia un bug... e leggendo online anche parecchio diffuso e discusso...

peccato perchè il KMS è una figata:[ 10.923349] [drm] radeon defaulting to kernel modesetting.
[ 10.923353] [drm] radeon kernel modesetting enabled.
[ 10.923437] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.923450] radeon 0000:01:00.0: setting latency timer to 64
[ 10.925517] [drm] radeon: Initializing kernel modesetting.
[ 10.925932] [drm] radeon: VRAM 256M
[ 10.925935] [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
[ 10.925937] [drm] radeon: GTT 512M
[ 10.925940] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 10.926053] radeon 0000:01:00.0: irq 29 for MSI/MSI-X
[ 10.926097] [drm] radeon: irq initialized.
[ 10.927042] [drm] radeon: 256M of VRAM memory ready
[ 10.927044] [drm] radeon: 512M of GTT memory ready.
[ 10.928583] [drm] radeon: 1 quad pipes, 2 z pipes initialized.
[ 10.928658] [drm] radeon: cp idle (0x10000C03)
[ 10.928707] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[ 11.581702] [drm] radeon: ring at 0x0000000020000000
[ 11.581973] [drm] radeon: ib pool ready.
[ 11.694538] fb0: radeondrmfb frame buffer device
[ 11.694547] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0

riconosce perfettamente tutto vram ecc..

peccato!

@slacker... ti funziona bene doom3? o il kms non capisco dal tuo post! :D

slacker
13-12-2009, 20:15
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
[dri] radeon kernel module version is 2.0.0 but version 1.17.0 or newer is needed.
[dri] Disabling DRI.

Penso sia un bug... e leggendo online anche parecchio diffuso e discusso...

Non è un bug. Ti manca qualcosa oppure devi ricompilare qualche pacchetto.
Io ho:

x11-libs/libdrm-2.4.16
media-libs/mesa-9999
x11-base/xorg-server-1.7.3
x11-drivers/xf86-video-ati-9999


Se li ricompili in quest'ordine non dovresti avere problemi.

@slacker... ti funziona bene doom3? o il kms non capisco dal tuo post! :D

il kms :)

Slayer86
14-12-2009, 13:52
Ancora niente...

slacker
14-12-2009, 20:56
Ancora niente...

Da http://wiki.x.org/wiki/radeonBuildHowTo#head-6c8a52410a5bf5f5de31505920156363a0d543bc
Your xf86-video-ati doesn't have support for KMS. You have to rebuild it against libdrm_radeon (libdrm configured with --enable-radeon-experimental-api). This also means that you have to rebuild mesa against same new libdrm because mesa doesn't have KMS support without libdrm_radeon either. Also check that you have correct versions of all components.

una libdrm recente di gentoo dovrebbe già avere la flag --enable-radeon-experimental-api abilitata...

Slayer86
15-12-2009, 10:31
Da http://wiki.x.org/wiki/radeonBuildHowTo#head-6c8a52410a5bf5f5de31505920156363a0d543bc


una libdrm recente di gentoo dovrebbe già avere la flag --enable-radeon-experimental-api abilitata...

ok sono un coglione... è xf86-video-ati... io ho i 6.12.4 pensavo fossero sufficenti, in quanto ultima release e avevo letto in giro che bastavno i 6.12.2... probabilmente l'inghippo è qui... adesso provo ad installare i 9999 però non capisco perchè portage non me li da come aggiornamento anche se sono presenti nell'overlay!!!

Per la flag in libdrm è presente già da parecchie versioni del pacchetto, ho controllato dentro l'ebuild! :D

EDIT : KMS PERFETTAMENTE FUNZIONANTE!!!!!!!!!! SIIIIII

ora però ho un problema con il frambebuffer... cosa devo impostare nel kernel? io ho disattivato tutti i moduli radeonfb vesafb ecc... però non vedo ancora nulla durante il boot... potrebbe essere un problema di parametri passati a grub?

slacker
15-12-2009, 17:08
ora però ho un problema con il frambebuffer... cosa devo impostare nel kernel? io ho disattivato tutti i moduli radeonfb vesafb ecc... però non vedo ancora nulla durante il boot... potrebbe essere un problema di parametri passati a grub?

Io ho:
kernel /vmlinuz-2.6.32 ro vga=791 root=/dev/sda8

e fino all'avvio di udev la risoluzione è 1024x768.
Dopo switcha alla risoluzione nativa 1280x800 senza problemi.

Slayer86
15-12-2009, 18:52
Io ho:
kernel /vmlinuz-2.6.32 ro vga=791 root=/dev/sda8

e fino all'avvio di udev la risoluzione è 1024x768.
Dopo switcha alla risoluzione nativa 1280x800 senza problemi.

ok risolto anche questa...finalmente KMS attivo e perfetto!
Dovevo far caricare all'avvio il modulo fbcon...
Bello... solo che con glxgears vado a metà degli fps di prima...
Ad oggi ancora non riesco a far andare l'uscita tv-out... vabbe...

edit:modificato il primo posto per aggiornare la mia configurazione di sistema...
presto pubblicherò una guida su come attivare il KMS!

Dane
16-12-2009, 10:15
glxgears a parte....
il compositing e il 2d in generale va bene o peggiora?

cmq sto scaricando mesa7.7rc2, libdrm e compagnia. Oggi pomeriggio aggiorno più o meno tutto (ho ritardato un po), a partire dalle qt4.6 (da quel che ho capito sono un po' più veloci) e a seguito kde4.3.4

Slayer86
16-12-2009, 12:12
glxgears a parte....
il compositing e il 2d in generale va bene o peggiora?

cmq sto scaricando mesa7.7rc2, libdrm e compagnia. Oggi pomeriggio aggiorno più o meno tutto (ho ritardato un po), a partire dalle qt4.6 (da quel che ho capito sono un po' più veloci) e a seguito kde4.3.4

compositing e 2d vanno meglio di prima! :D

edit: precisazione... non che prima andassero male anzi!!! solo che ora vanno meglio... per esmpio quando aprovo un'applicazione 3d in finestra poi era impossibile metterci sopra qualche cosa... ora invece il bug non c'è più!
In oltre quando sospendevo il portatile diciamo c'era un 20% di probabilità che non ripartisse... per ora anche questo mi sembra gestito molto melgio! :D

Dane
16-12-2009, 21:54
buono!
il compositing e il 2D in generale sono cio' che mi insteressa principalmente.

oltre a libdrm 2.4.16 e mesa 7.7rcxx cosa mi serve?
basta il gentoo-sources 2.6.31?
o serve il 32 e xf86-video-ati > 2.6.14?

Buona serata!

Slayer86
16-12-2009, 22:24
buono!
il compositing e il 2D in generale sono cio' che mi insteressa principalmente.

oltre a libdrm 2.4.16 e mesa 7.7rcxx cosa mi serve?
basta il gentoo-sources 2.6.31?
o serve il 32 e xf86-video-ati > 2.6.14?

Buona serata!

allora... a brevissimo pubblico la guida passo-passo... cmq serve:
-mesa-7.7_rc2(o 9999);(la 7.7_rc2 è in portage!)
-libdrm-2.4.16;
-xf86-video-ati.9999;(indispensabili...)
-meglio gentoo-sources-2.6.32;(con r600 e r700 è obbligatorio...)

finito di aggionrare e compilare il tutto... aggiungi ai moduli in autoload fbcon altrimenti addio framebuffer :D

darkbasic
18-12-2009, 16:54
Moolto meglio mesa-9999, mesa-progs-9999, xf86-video-ati-9999, libdrm-9999, linux-2.6.32+radeon-drm-testing.
Qua va che è una bomba ;)

(a dire il vero ho attivo anche il supporto sperimentale glsl/opengl2)

P.S.
Consiglio anche di compilare radeon staticamente e di attivare kms di default (sta su staging l'opzione). se si volesse usare ums basta un nomodeset in brub.

Consigliato anche xorg-server 1.7.3.901-r1

Slayer86
18-12-2009, 17:35
Moolto meglio mesa-9999, mesa-progs-9999, xf86-video-ati-9999, libdrm-9999, linux-2.6.32+radeon-drm-testing.
Qua va che è una bomba ;)

(a dire il vero ho attivo anche il supporto sperimentale glsl/opengl2)

P.S.
Consiglio anche di compilare radeon staticamente e di attivare kms di default (sta su staging l'opzione). se si volesse usare ums basta un nomodeset in brub.

Consigliato anche xorg-server 1.7.3.901-r1

anche nel 3d le prestazioni sono buone con la tua configurazione???

darkbasic
18-12-2009, 18:54
anche nel 3d le prestazioni sono buone con la tua configurazione???

Gioco a nexuiz a 2560x1600 dettagli medi...
In questo modo le prestazioni nel 3d sono quanto di meglio si possa avere.

Slayer86
18-12-2009, 19:59
come hai fatto ad attivare il supporto a glsl e opengl2???

Life bringer
18-12-2009, 21:14
leggendo darkbasic ho voluto installare nexuiz su debian nella quale pagine fa qualcuno mi aiutò ad installare i driver open. Purtroppo a me scatta già nel menu principale, più che scatta sembra bloccarsi il mouse si muove una volta ogni 30 secondi, in più i driver closed non ne vogliono saper di funzionare, quindi o open o picche, ecco l'xorg conf come mi fu consigliato d'impostarlo:
Section "Device"
Identifier "Radeon 790gx"
Driver "radeon"
# Option "DRI" "true"
Option "AccelMethod" "EXA"
EndSection

Questo l'output di glxgears:
719 frames in 5.0 seconds = 143.750 FPS
782 frames in 5.0 seconds = 156.378 FPS
791 frames in 5.0 seconds = 158.111 FPS

Grazie in anticipo.

darkbasic
19-12-2009, 01:11
come hai fatto ad attivare il supporto a glsl e opengl2???

Devi utilizzare la CFLAG -DR600_ENABLE_GLSL_TEST per compilare mesa.

darkbasic
20-12-2009, 16:01
Opengl2 ora è attivo di default :)

red.hell
22-12-2009, 10:53
sto facendo qualche tentativo anch'io su gentoo, ma con scarsissimi risultati

ovvero all'avvio di xdm mi diventa lo schermo nero (ma acceso), ho il login automatico e kde lo carica perchè dopo un pò sento comunque la musichetta, mentre usando i vesa la grafica si vede

in allegato il log di xorg e l'xorg.conf, mesa, libdrm e xf-86-video-ati installati ieri da git (ma il problema c'è sempre stato fin dalla prima volta che li ho installati) e xorg-server-1.7.3.901-r1

da dove può arrivare il problema?

darkbasic
24-12-2009, 00:55
kernel? i firmware li hai installati? /var/log/messages si lamenta al riguardo per caso?

red.hell
24-12-2009, 08:32
kernel? i firmware li hai installati? /var/log/messages si lamenta al riguardo per caso?

kernel vari (2.6.32-gentoo e 2.6.33-RC1-vanilla), anche se non ho ancora capito se genkernel mi compila e installa i moduli correttamente oppure no (anche se ho settato come modulo ath5k non me lo installa in /lib/modules)

i firmware sembrano installati e caricati:Dec 22 16:48:02 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Dec 22 16:48:03 localhost kernel: [drm] radeon defaulting to userspace modesetting.
Dec 22 16:48:03 localhost kernel: [drm] Initialized radeon 1.31.0 20080528 for 0000:02:00.0 on minor 0
Dec 22 16:48:03 localhost kernel: agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
Dec 22 16:48:03 localhost kernel: agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
Dec 22 16:48:03 localhost kernel: pci 0000:02:00.0: putting AGP V3 device into 8x mode
Dec 22 16:48:03 localhost kernel: [drm] Setting GART location based on new memory map
Dec 22 16:48:03 localhost kernel: [drm] Loading R300 Microcode
Dec 22 16:48:03 localhost kernel: platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
Dec 22 16:48:03 localhost kernel: [drm] Num pipes: 2
Dec 22 16:48:03 localhost kernel: [drm] writeback test succeeded in 1 usecs

Dane
24-12-2009, 13:56
prova a vedere che non hai il mio stesso problema:

entrada kdm in failsafe. Poi lancia kwin e vedi se ti si blocca smanettandoci (ingrandisci, ridimensiona, ecc ecc). Se ti si blocca tutto dovresti essere in grado di riavviare il pc a furia di ctrlaltcanc o ctraltbkspace, magari cercando di passare ad altri terminali.
A pc riavviato controlla il log di x. Io mi ritroavo un segfault che ho risolto downgradando mesa.

goodluck & auguri a tutti.

red.hell
25-12-2009, 19:18
lo schermo resta nero ma il messages da qualche notizia in piùDec 25 19:39:04 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Dec 25 19:39:04 localhost kernel: ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
Dec 25 19:39:04 localhost kernel: Intel ICH 0000:00:06.0: PCI INT A -> Link[LACI] -> GSI 11 (level, low) -> IRQ 11
Dec 25 19:39:04 localhost kernel: Intel ICH 0000:00:06.0: setting latency timer to 64
Dec 25 19:39:04 localhost kernel: udev: renamed network interface eth1 to eth0
Dec 25 19:39:04 localhost kernel: udev: renamed network interface eth0_rename to eth1
Dec 25 19:39:04 localhost kernel: [drm] radeon defaulting to kernel modesetting.
Dec 25 19:39:04 localhost kernel: [drm] radeon kernel modesetting enabled.
Dec 25 19:39:04 localhost kernel: radeon 0000:02:00.0: PCI INT A -> Link[LNK4] -> GSI 11 (level, low) -> IRQ 11
Dec 25 19:39:04 localhost kernel: [drm] radeon: Initializing kernel modesetting.
Dec 25 19:39:04 localhost kernel: [drm] register mmio base: 0xE9000000
Dec 25 19:39:04 localhost kernel: [drm] register mmio size: 65536
Dec 25 19:39:04 localhost kernel: [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Dec 25 19:39:04 localhost kernel: [drm] Generation 1 PCI interface in multifunction mode
Dec 25 19:39:04 localhost kernel: [drm] Limiting VRAM to one aperture
Dec 25 19:39:04 localhost kernel: agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
Dec 25 19:39:04 localhost kernel: agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
Dec 25 19:39:04 localhost kernel: radeon 0000:02:00.0: putting AGP V3 device into 8x mode
Dec 25 19:39:04 localhost kernel: [drm] radeon: VRAM 128M
Dec 25 19:39:04 localhost kernel: [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
Dec 25 19:39:04 localhost kernel: [drm] radeon: GTT 128M
Dec 25 19:39:04 localhost kernel: [drm] radeon: GTT from 0xD0000000 to 0xD7FFFFFF
Dec 25 19:39:04 localhost kernel: [drm] radeon: irq initialized.
Dec 25 19:39:04 localhost kernel: [drm] Detected VRAM RAM=128M, BAR=128M
Dec 25 19:39:04 localhost kernel: [drm] RAM width 128bits DDR
Dec 25 19:39:04 localhost kernel: [TTM] Zone kernel: Available graphics memory: 447240 kiB.
Dec 25 19:39:04 localhost kernel: [TTM] Zone highmem: Available graphics memory: 516844 kiB.
Dec 25 19:39:04 localhost kernel: [drm] radeon: 128M of VRAM memory ready
Dec 25 19:39:04 localhost kernel: [drm] radeon: 128M of GTT memory ready.
Dec 25 19:39:04 localhost kernel: [drm] radeon: 2 quad pipes, 1 Z pipes initialized.
Dec 25 19:39:04 localhost kernel: [drm] radeon: cp idle (0x10000C00)
Dec 25 19:39:04 localhost kernel: [drm] Loading R300 Microcode
Dec 25 19:39:04 localhost kernel: platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
Dec 25 19:39:04 localhost kernel: intel8x0_measure_ac97_clock: measured 50659 usecs (2464 samples)
Dec 25 19:39:04 localhost kernel: intel8x0: clocking to 47370
Dec 25 19:39:04 localhost kernel: [drm] radeon: ring at 0x00000000D0000000
Dec 25 19:39:04 localhost kernel: [drm] ring test succeeded in 0 usecs
Dec 25 19:39:04 localhost kernel: [drm] radeon: ib pool ready.
Dec 25 19:39:04 localhost kernel: [drm] ib test succeeded in 0 usecs
Dec 25 19:39:04 localhost kernel: [drm] Default TV standard: NTSC
Dec 25 19:39:04 localhost kernel: [drm] 27.000000000 MHz TV ref clk
Dec 25 19:39:04 localhost kernel: [drm] DFP table revision: 4
Dec 25 19:39:04 localhost kernel: [drm] Radeon Display Connectors
Dec 25 19:39:04 localhost kernel: [drm] Connector 0:
Dec 25 19:39:04 localhost kernel: [drm] VGA
Dec 25 19:39:04 localhost kernel: [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
Dec 25 19:39:04 localhost kernel: [drm] Encoders:
Dec 25 19:39:04 localhost kernel: [drm] CRT1: INTERNAL_DAC1
Dec 25 19:39:04 localhost kernel: [drm] Connector 1:
Dec 25 19:39:04 localhost kernel: [drm] DVI-I
Dec 25 19:39:04 localhost kernel: [drm] HPD1
Dec 25 19:39:04 localhost kernel: [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
Dec 25 19:39:04 localhost kernel: [drm] Encoders:
Dec 25 19:39:04 localhost kernel: [drm] CRT2: INTERNAL_DAC2
Dec 25 19:39:04 localhost kernel: [drm] DFP1: INTERNAL_TMDS1
Dec 25 19:39:04 localhost kernel: [drm] Connector 2:
Dec 25 19:39:04 localhost kernel: [drm] S-video
Dec 25 19:39:04 localhost kernel: [drm] Encoders:
Dec 25 19:39:04 localhost kernel: [drm] TV1: INTERNAL_DAC2
Dec 25 19:39:04 localhost kernel: [drm] fb mappable at 0xD8040000
Dec 25 19:39:04 localhost kernel: [drm] vram apper at 0xD8000000
Dec 25 19:39:04 localhost kernel: [drm] size 5242880
Dec 25 19:39:04 localhost kernel: [drm] fb depth is 24
Dec 25 19:39:04 localhost kernel: [drm] pitch is 5120
Dec 25 19:39:04 localhost kernel: fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Dec 25 19:39:04 localhost kernel: Console: switching to colour dummy device 80x25
Dec 25 19:39:04 localhost kernel: Console: switching to colour frame buffer device 160x64
Dec 25 19:39:04 localhost kernel: [drm] TV-11: set mode 1280x1024 23
Dec 25 19:39:04 localhost kernel: fb0: radeondrmfb frame buffer device
Dec 25 19:39:04 localhost kernel: registered panic notifier
Dec 25 19:39:04 localhost kernel: [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0
Dec 25 19:39:04 localhost kernel: EXT3-fs (hda6): using internal journal
Dec 25 19:39:04 localhost kernel: kjournald starting. Commit interval 5 seconds
Dec 25 19:39:04 localhost kernel: EXT3-fs (hda7): using internal journal
Dec 25 19:39:04 localhost kernel: EXT3-fs (hda7): mounted filesystem with writeback data mode
Dec 25 19:39:04 localhost kernel: Adding 2096440k swap on /dev/hda5. Priority:-1 extents:1 across:2096440k
Dec 25 19:39:04 localhost acpid: starting up with proc fs
Dec 25 19:39:04 localhost acpid: 1 rule loaded
Dec 25 19:39:04 localhost acpid: waiting for events: event logging is off
Dec 25 19:39:08 localhost acpid: client connected from 14813[102:1001]
Dec 25 19:39:08 localhost acpid: 1 client rule loaded
Dec 25 19:39:09 localhost acpid: client connected from 14866[0:0]
Dec 25 19:39:09 localhost acpid: 1 client rule loaded
Dec 25 19:39:10 localhost kernel: [drm] TV-11: set mode 1024x768 25
Dec 25 19:39:10 localhost kernel: [drm] TV-11: set mode 1024x768 25
Dec 25 19:39:11 localhost kdm: :0[14869]: pam_unix(kde-np:session): session opened for user rosso by (uid=0)
Dec 25 19:39:14 localhost kernel: r8169: eth0: link down
Dec 25 19:39:14 localhost kernel: r8169: eth0: link down
Dec 25 19:39:36 localhost kernel: NET: Registered protocol family 10
Dec 25 19:39:36 localhost kernel: lo: Disabled Privacy Extensions
Dec 25 19:39:36 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec 25 19:39:38 localhost pulseaudio[15017]: pid.c: Daemon already running.
Dec 25 19:39:40 localhost python2.6: hp-systray[15001]: warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting.
Dec 25 19:40:12 localhost kernel: [drm] TV-11: set mode 1280x1024 23

sembra che al posto di cercare il monitor sulla dvi (un vecchio sony 17" CRT collegato con un adattatore dvi->vga) punti all'uscita tv (la s-video della 9800pro)

eppure che xsession-errors sembra corretto (nella parte relativa al monitor):RandRScreen::loadSettings - adding output: 82
Setting CRTC 79 on output "DVI-0" (previous 0 )
CRTC outputs: (82)
Output name: "DVI-0"
Output refresh rate: 84.9967
Output rect: QRect(0,0 1024x768)
Output rotation: 1
RandRScreen::loadSettings - adding output: 83
Setting CRTC 0 on output "S-video" (previous 0 )
XRandROutputs::init
added output 81
added output 82
added output 83
output: "DVI-0" QRect(0,0 1024x768) 0 false false
output: "S-video" QRect(0,0 0x0) 0 false false
output: "VGA-0" QRect(0,0 0x0) 0 false false
load xml
connected: 1
looking for current "DVI-0"
known "*" has score: 0.25
screen: 0 QRect(0,0 1024x768)
looking for a matching configuration...
connected: 1
looking for current "DVI-0"
known "*" has score: 0.25
found outputs, known: false
connected: 1
looking for current "DVI-0"
known "*" has score: 0.25
activate external configuration!!
registered the service: true
screens registered on the bus: true
outputs registered on the bus: true
configurations registered on the bus: true

in più adesso (forse per un errore mio nell'impostazione del framebuffer nel kernel) non vedo il log di openrc nell'avvio, al posto di quello c'è lo schermo nero

zephyr83
28-12-2009, 18:11
più leggo il thread e più mi prende lo sconforto su ati e linux :cry:

darkbasic
07-01-2010, 19:53
Sconforto? I driver open stanno diventando spettacolari...

pabloski
07-01-2010, 20:51
Sconforto? I driver open stanno diventando spettacolari...

vero, tra poco avremo il supporto 3d fino al r700 :D

se non sbaglio nel prossimo kernel c'è il kms per l'r700 e l'interrupt handling per tutte le radeon

Slayer86
08-01-2010, 14:10
io vedo peggio Nvidia... anche se ora ha driver closed per linux che sono paragonabili a quelli per windows, mentre per ati/amd non si può dire lo stesso...
in futuro però i dirver open suppoerteranno tutte le funzionalità... mentre nvidia sembra non essere intenzionata a dare pieno supporto per esempio all'hybrid-sli!!!
Diciamo che le basi che si stanno gettando con i driver open ati sono ottime...

darkbasic
08-01-2010, 17:49
vero, tra poco avremo il supporto 3d fino al r700 :D

se non sbaglio nel prossimo kernel c'è il kms per l'r700 e l'interrupt handling per tutte le radeon
3d fino a r700 e kms sono già in mesa stable e nel 2.6.32.
Quello che manca nel 2.6.32 è l'interrupt handling e bisognerà aspettare il 2.6.33.

Slayer86
09-01-2010, 16:09
cmq si sono fatti delle belle vacanze gli sviluppatori... le novitàscarseggiano ultimamente! :D

Life bringer
11-01-2010, 06:45
Domanda:
Per attivare il kms su debian testing (ho una scheda video integrata ati, chipset 790gx) devo seguire questa guida?
click qui (http://www.ott.net/knowledge/radeon-kms-on-debian-testing/)

darkbasic
11-01-2010, 16:44
Basta un radeon.modeset=1 in grub...

Life bringer
11-01-2010, 23:31
Oltre ad un kernel compilato con il kms attivato, vero?
Grazie appena risolvono l'ultima grana con debian e il 2.6.33 faccio un ulteriore tentativo.

darkbasic
12-01-2010, 11:05
Oltre ad un kernel compilato con il kms attivato, vero?
Quello di debian dovrebbe averlo attivato penso...

Life bringer
12-01-2010, 11:35
Quello di debian dovrebbe averlo attivato penso...

L'ultimo kernel debian nella versione testing è il 2.6.30, dubito che supporti il kms... faccio questa domanda perchè provai ad abilitare il kms nella versione 2.6.32.2 ma all'avvio il sistema si pianta (senza errori). Questo può essere causato dalla mancanza dell avoce che mi hai indicato prima?

Trotto@81
12-01-2010, 11:37
io vedo peggio Nvidia... anche se ora ha driver closed per linux che sono paragonabili a quelli per windows, mentre per ati/amd non si può dire lo stesso...
in futuro però i dirver open suppoerteranno tutte le funzionalità... mentre nvidia sembra non essere intenzionata a dare pieno supporto per esempio all'hybrid-sli!!!
Diciamo che le basi che si stanno gettando con i driver open ati sono ottime...
Io sono pro NVIDIA da sempre, e maggiormente ora che i loro driver anche se chiusi sono spettacolari.
Quando i driver ATI saranno maturi e di semplice installazione come gli NVIDIA il passaggio sarà immediato.

AnonimoVeneziano
12-01-2010, 13:28
Qualcuno ha notizie riguardo al supporto alle schede video Evergreen?

Slayer86
12-01-2010, 14:30
Qualcuno ha notizie riguardo al supporto alle schede video Evergreen?

ancora niente di rilevante... cmq in prima pagina ci sono tutti i link del caso!!!

darkbasic
12-01-2010, 18:13
L'ultimo kernel debian nella versione testing è il 2.6.30
Dubito fortemente... usa quello di sid allora che è il 2.6.32.

Life bringer
16-01-2010, 21:02
Bon ho compilato or ora il kernel 2.6.33 con il kms attivato, come l'ultima volta, purtroppo quando avvio il kernel con KMS il sistema si blocca alla scompattazione del kernel, quindi mi chiedo se la mia scheda video non è supportata (sempre la solita integrata 79gx) oppure se è debian testing ad essere rognoso.

zephyr83
16-01-2010, 21:25
Bon ho compilato or ora il kernel 2.6.33 con il kms attivato, come l'ultima volta, purtroppo quando avvio il kernel con KMS il sistema si blocca alla scompattazione del kernel, quindi mi chiedo se la mia scheda video non è supportata (sempre la solita integrata 79gx) oppure se è debian testing ad essere rognoso.
chissà quante cose vanno sistemate prima :stordita: anche su frugalware ho letto che in teoria cn il nuovo aggiornamento c'è il supporto a KMS ma ancora nn va quindi meglio tenerlo disabilitato :sofico:

Life bringer
16-01-2010, 21:53
Lo immagino, infatti avevo linkato una guida chiedendo se fosse necessario seguirla, ma mi è stato detto che basta mettere una voce in grub :\

darkbasic
17-01-2010, 14:07
ma mi è stato detto che basta mettere una voce in grub :\

Ho dato per scontato che debian avesse mesa 7.7, non è così? :doh:

Ad ogni modo finalmente funziona anche il bloom in openarena (mesa git) :D

Life bringer
17-01-2010, 14:40
Ha mesa 7.6, non va bene? :cry:

McB
17-01-2010, 14:51
Per squeeze puoi sempre prelevare mesa 7.7 da experimental come ho fatto io.

Life bringer
17-01-2010, 15:22
Non vorrei smanacciare troppo con il so visto che lo uso come serverino, mi sembra proprio strano che abilitando il kms si pianti il sistema già all'estrazione del kernel. Non vorrei far tentativi a vuoto :D

McB
17-01-2010, 15:26
Mesa sembra stabile qui da me. per adesso mai crashato niente. Proverei io a compilare il kernel ma non so per quale motivo se lo compilo alla debian way poi in fase di boot mi dice che non trova la directory dei moduli. Eppure la cartella c'è.

Life bringer
17-01-2010, 15:37
Sinceramente non so come aiutarti, so che per certo con debian (testing) non si riesce a compilare il kernel del ramo 2.6.33, non ho avuto problemi con il 32.3 compilato proprio ieri sera, questo è il comando che do io:
time CONCURRENCY_LEVEL=4 (numero processori * 2) make-kpkg --append-to-version -nomechevuoi --revision=numero kernel_image
Così non ho mai avuto problemi...

In dettaglio ecco la mia stringa: time CONCURRENCY_LEVEL=4 make-kpkg --append-to-version -min --revision=8 kernel_image

McB
17-01-2010, 15:46
Ma io compilo sempre con initrd. ormai mi sono abituato così :D e stare lì a spulciare per vedere quali moduli vanno statici non ho proprio passione in questo momento.

Cmq se riesci a far partire il tutto con KMS attivo fammi sapere. :)

Trotto@81
18-01-2010, 07:32
I driver closed e open hanno qualcosa di simile al vdpau di nvidia?

Slayer86
18-01-2010, 10:32
ho aggiornato a mesa-9999 + libdrm-9999 ed ora doom 3 è finalmente giocabile (ovviamente con KMS attivo)!!! :D :D :D

darkbasic
18-01-2010, 12:07
I driver closed e open hanno qualcosa di simile al vdpau di nvidia?
I closed non so, gli open soltanto i driver gallium3d, e in ogni caso niente di utilizzabile al momento...

Slayer86
18-01-2010, 14:04
I closed non so, gli open soltanto i driver gallium3d, e in ogni caso niente di utilizzabile al momento...

I closed hanno da poco introdotto il supporto al XvBA... ma ancora è poco sfruttato dalle applicazioni!!!

Gli open ancora nulla! :D diciamo che ci sono cose più importanti al momento...

darkbasic
18-01-2010, 16:20
http://lists.mplayerhq.hu/pipermail/mplayer-users/2009-December/078479.html

McB
18-01-2010, 16:24
@Life bringer

Mi sono messo a ricompilare il kernel pure io :D
Se attivo il KMS funziona solo che ogni tanto non parte il sistema. Bisogna resettare e poi parte tranquillamente. Potrebbe essere anche un problema della mia scheda che è agp e a quanto sembra può dare problemi.
Se ti interessa solo il 2d funziona alla grande. Se invece vuoi anche il 3D come me allora puoi ricompilare anche libdrm e mesa che sennò ti arìttacchi.
Io ho lasciato perdere dato che questo è il mio sistema primario e non ho voglia di installare tutto da capo se sbaglio qualcosa.

Life bringer
18-01-2010, 17:34
Quindi ti si blocca all'avvio anche a te? :mbe:

McB
18-01-2010, 17:40
Arriva fino a waiting /dev fully populated blablabla e poi schermo nero oppure righe bianco nere. Poi faccio reset parte fino a lì e poi la console passa come è giusto che sia con il KMS a 1440*900 e fa il boot normale solo che poi il DRI me lo trovo disattivato per via che libdrm non è compilato con una opzione(almeno quello che mi è sembrato di capire leggendo sul wiki.

Life bringer
18-01-2010, 18:32
Chiaro! Mi sa che il mio problema è un altro quindi... aspetterò che il kms sia più "accessibile", certo che questa integrata ati è proprio una magagna, l'altro bug IMPORTANTE è che usando il sideport con i driver non open non funziona nulla :rolleyes:

Tidus.hw
20-01-2010, 23:30
ciao a tutti, mi sono letto un po' tutta la discussione perche' ho una debian testing e una radeon x1250 integrata e non riesco ad abilitare l'accelerazione con i driver open.. mi da sempre "Software Rasterizer"
mi potete aiutare?? grazie :muro:
chiedetemi pure tutto quello che vi serve sapere ..

McB
20-01-2010, 23:33
posta l'output dei dmesg | grep drm

e vediamo che dice

Tidus.hw
21-01-2010, 08:27
posta l'output dei dmesg | grep drm

e vediamo che dice

ecco qua:

marco@marco-desktop:~$ dmesg | grep drm
[ 16.304734] [drm] Initialized drm 1.1.0 20060810
[ 16.321247] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:05.0 on minor 0
[ 17.048963] [drm] Setting GART location based on new memory map
[ 17.049518] [drm] Loading RS690/RS740 Microcode
[ 17.081520] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!


>.<

McB
21-01-2010, 08:43
Il pacchetto firmware-linux è installato?
Se si prova a riscaricarlo da qui (http://ftp.it.debian.org/debian/pool/non-free/f/firmware-nonfree/firmware-linux_0.18_all.deb) e installalo con dpkg -i firmware-linux_0.18_all.deb
altrimenti direttamente con il gestore che usi.

Tidus.hw
21-01-2010, 09:00
Il pacchetto firmware-linux è installato?
Se si prova a riscaricarlo da qui (http://ftp.it.debian.org/debian/pool/non-free/f/firmware-nonfree/firmware-linux_0.18_all.deb) e installalo con dpkg -i firmware-linux_0.18_all.deb
altrimenti direttamente con il gestore che usi.

ciao, prima ancora che mi rispondenssi l'ho scaricato e ho caricato il firmware e ora tutto sembra funzionare alla perfezione. :D
Dal pannello delle impostazioni degli effetti del desktop di kde4 ho importato il rendering cosi:
Compositing type: OpenGL
OpenGL Mode: Shared Memory
Texture Filter: Trilinear
Vsync disabilitato e direct rendering abilitato
Mi sembra che cosi' abbia la una qualita' e velocita' migliore... se vi interessa posso fare qualche test per vedere quanto veloce va, intanto sto scaricando warsow :)

saluti e grazie :)

McB
21-01-2010, 09:05
Meglio se funziona. Tu fai pure i test.
Che poi torna sempre utile sapere come funzionano i driver con più schede possibili.

Tidus.hw
21-01-2010, 10:55
eccone un altra xD ho provato a farlo andare ma mi da questo errore all'avvio:

----- R_Init -----
Using libGL.so.1 for OpenGL...Display initialization
..XFree86-VidMode Extension Version 2.2
..XFree86-Xinerama Extension Version 1.1
..Got colorbits 24, depthbits 24, stencilbits 8
...setting mode 4:
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 133 (XFree86-VidModeExtension)
Minor opcode of failed request: 17 (XF86VidModeGetGammaRamp)
Value in failed request: 0x27
Serial number of failed request: 60
Current serial number in output stream: 60
marco@marco-desktop:~$

McB
21-01-2010, 11:05
warsow non lo avevo mai provato. ora lo installo e vedo.
Prova a scaricare nezuiz o sauerbraten. I test gli facevo con quelli per vedere se andavano i driver.

Tidus.hw
21-01-2010, 11:09
warsow non lo avevo mai provato. ora lo installo e vedo.
Prova a scaricare nezuiz o sauerbraten. I test gli facevo con quelli per vedere se andavano i driver.

ok, ah ho provato anche a disabilitare compiz e da sempre lo stesso errore, poi ho provato anche a farlo partire in finestra modificando il config.cfg ma niente.. Online non ho trovato nulla di utile per me (sono abbastanza noob :D )

adesso li scarico..

McB
21-01-2010, 12:27
Scaricato il gioco e ho provato a giocare. funziona con compiz attivo a 1440*900 cioè il massimo della risoluzione del mio monitor :)
Posta il tuo xorg.conf e l'output di glxinfo | grep OpenGL e vediamo se si può fare qualcosa.

Potrebbe essere anche un problema di driver. Io con i driver non sono più su testing. I driver mesa e radeon gli ho presi dal ppa di ubuntu che compilano da git.

@Life bringer
Da te andava in kernel panic con l'errore che non trova UFS oppure VFS(ora non ricordo)?
Perchè io ho ricompilato il kernel 32.4 e una volta mi è andato in kernel panic subito con questo errore. Poi ho semplicemente riavviato ed è tornato tutto a posto.
Cmq per attivare il KMS con debian oltre ricompilarti il kernel devi ricompilare anche mesa,drm e driver radeon attivando le opzioni per radeon nel drm oppure come ho fatto io prenderli dal ppa di ubuntu. Alla fine il KMS si attiva regolarmente, attiva pure DRI2 da me però con la mia scheda cadono vertiginosamente le prestazioni. Devo aspettare ancora un pò con la mia scheda. Nel frattempo ricompilo il kernel togliendo man mano tutto l'hardware che non ho. :D

Tidus.hw
21-01-2010, 12:45
Scaricato il gioco e ho provato a giocare. funziona con compiz attivo a 1440*900 cioè il massimo della risoluzione del mio monitor :)
Posta il tuo xorg.conf e l'output di glxinfo | grep OpenGL e vediamo se si può fare qualcosa.

Potrebbe essere anche un problema di driver. Io con i driver non sono più su testing. I driver mesa e radeon gli ho presi dal ppa di ubuntu che compilano da git.



ecco qui:


marco@marco-desktop:~$ glxinfo | grep OpenGL
OpenGL vendor string: Brian Paul
OpenGL renderer string: Mesa X11
OpenGL version string: 2.1 Mesa 7.6.1
OpenGL shading language version string: 1.20
OpenGL extensions:


sto impazzendo, ho riavviato il pc e adesso se faccio
glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Mesa X11

al posto della mia scheda grafica viene fuori Mesa X11.

Ho provato a glxgears per vedere che succedeva e mi segna quasi 500fps.

lo xorg.conf e' questo:

Section "Device"
Identifier "Radeon x1250"
Driver "radeon"
Option "AGPMode" "8"
Option "AccelMethod" "EXA"
Option "EXAVSync" "true" #questa opzione va disabilitata quando si misurano i frame
Option "EnablePageFlip" "true"
Option "backingstore" "true"
Option "AccelDFS" "true" #alcuni bridge AGP non sono stabili con questa opzione
Option "MigrationHeuristic" "greedy"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection

(ho tagliato le parti che credo non fossero importanti)

:muro:

McB
21-01-2010, 13:27
Prova aptitude search mesa e dimmi che vien fuori.
Non vorrei che manca un qualche pacchetto di mesa.

Ti ho messo aptitude perchè non so come far uscire la lista con apt-get :D

darkbasic
21-01-2010, 13:32
Ti ho messo aptitude perchè non so come far uscire la lista con apt-get :D

apt-cache search

McB
21-01-2010, 13:39
apt-cache search

Eccolo il comando grazie :D

Peccato che non faccia vedere al colo quali siano installati. Devo studiarmi un po' la sintassi --installed che così al volo mi da un troppa roba che non ho installato.

Tidus.hw
21-01-2010, 14:01
marco-desktop:/home/marco# aptitude search mesa
pB libgl1-mesa-dev - A free implementation of the OpenGL API -- GLX development files
i libgl1-mesa-dri - A free implementation of the OpenGL API -- DRI modules
p libgl1-mesa-dri-dbg - Debugging symbols for the Mesa DRI modules
v libgl1-mesa-dri-dev -
c libgl1-mesa-glx - A free implementation of the OpenGL API -- GLX runtime
p libgl1-mesa-glx-dbg - Debugging symbols for the Mesa GLX runtime
v libgl1-mesa-swrast -
v libgl1-mesa-swrast-dbg -
v libgl1-mesa-swrast-dev -
i A libgl1-mesa-swx11 - A free implementation of the OpenGL API -- runtime
p libgl1-mesa-swx11-dbg - A free implementation of the OpenGL API -- debugging symbols
p libgl1-mesa-swx11-dev - A free implementation of the OpenGL API -- development files
i libgl1-mesa-swx11-i686 - Mesa OpenGL runtime [i686 optimized]
i A libglu1-mesa - The OpenGL utility library (GLU)
pi libglu1-mesa-dev - The OpenGL utility library -- development files
p libglw1-mesa - A free implementation of the OpenGL API -- runtime
p libglw1-mesa-dev - A free implementation of the OpenGL API -- development files
v libosmesa-dev -
i A libosmesa6 - Mesa Off-screen rendering extension
p libosmesa6-dev - Mesa Off-screen rendering extension -- development files
pi mesa-common-dev - Developer documentation for Mesa
i mesa-utils - Miscellaneous Mesa GL utilities
v mesag-dev -
v mesag-widgets-dev -
v mesag3 -
v mesag3-widgets -
p xlibmesa-gl - transitional package for Debian etch
p xlibmesa-gl-dev - transitional package for Debian etch
p xlibmesa-glu - transitional package for Debian etch
v xlibmesa-glu-dev -
v xlibosmesa-dev -
marco-desktop:/home/marco#


ecco qua, ma che driver sarebbero Mesa X11?? e come mai gli ingranaggi mi fanno un sacco di fps ma i giochi non vanno? >.<

McB
21-01-2010, 14:08
Quei ingranaggi non sono un vero test. Io con la mia x1650 pro ne faccio 3600 ca.

Cmq installa libgl1-mesa-glx e automaticamente dovrebbe rimuovere libgl1-mesa-swx11 e poi riavvia e ridai il comando glxinfo | grep OpenGL che poi dovrebbe essere tutto a posto.

Sinceramente non so cosa siano i X11 anche se penso che sia qualcosa tipo emulato dalla cpu.

Tidus.hw
21-01-2010, 14:17
Quei ingranaggi non sono un vero test. Io con la mia x1650 pro ne faccio 3600 ca.

Cmq installa libgl1-mesa-glx e automaticamente dovrebbe rimuovere libgl1-mesa-swx11 e poi riavvia e ridai il comando glxinfo | grep OpenGL che poi dovrebbe essere tutto a posto.

Sinceramente non so cosa siano i X11 anche se penso che sia qualcosa tipo emulato dalla cpu.

marco@marco-desktop:~$ glxinfo | grep OpenGL
OpenGL vendor string: DRI R300 Project
OpenGL renderer string: Mesa DRI R300 (RS690 791E) 20090101 x86/MMX+/3DNow!+/SSE2 NO-TCL
OpenGL version string: 1.5 Mesa 7.6.1
OpenGL extensions:

cavolo avevi proprio ragione!!! ma come facevi a sapere che dipendeva da quello?? grazie mille :D

McB
21-01-2010, 14:20
Ho semplicemente confrontato con quelli installati da me. :D

Dato che una volta avevo fatto casino con i driver provando di tutto e di più avevo notato che avevo installato i swx11 e il mio pc non si muoveva. :)

Tidus.hw
21-01-2010, 14:25
Ho semplicemente confrontato con quelli installati da me. :D

Dato che una volta avevo fatto casino con i driver provando di tutto e di più avevo notato che avevo installato i swx11 e il mio pc non si muoveva. :)

capito :D

cmq ora ho provato openarena e l'accelerazione hardware c'e' anche se non e' proprio fluidissimo.. ma forse e' semplicemente la scheda grafica lenta :D
warsow non va ma penso che sia un problema che non c'entri coi driver ^_^