Vic24
15-10-2008, 09:43
Questo è quello che mi dice speedfan
Your hard disk is a SAMSUNG HM160HI with firmware HH100-08.
The average temperature for this hard disk is 39C (MIN=28C MAX=52C) and yours is 34C.
Your hard disk's S.M.A.R.T. attributes are now being analyzed and a full report about the reliability, health and status of your hard disk is generated:
Error: Reallocated Sector Count has reached its threshold. Current value is 1 and threshold is 10.
According to S.M.A.R.T. specifications, your hard disk is failing and needs to be immediately replaced. Backup your data as soon as possible.
Warning: Reallocated Sector Count reached, in the past, its threshold. Worst value is 1 and threshold is 10.
Your hard disk is now being compared to real data used to define normal values for your specific hard disk model. This way, the analysis can automatically use proper operating ranges. The images give you an idea of how each attribute is within such range. Current and raw values are shown for easier reference for experienced users. There are 2228 hard disk models in the current archive.
Attribute Current Raw Overall
10 Raw Read Error Rate 100 45 Very good
10 Spin Up Time 252 1937 Very good
10 Start/Stop Count 100 285 Very good
0 Reallocated Sector Count 1 1024 Watch
Warning: Reallocated Sector Count is below the average limits (85-252).
10 Seek Error Rate 252 0 Very good
10 Seek Time Performance 252 0 Very good
10 Power On Hours Count 252 94 Very good
1 Spin Retry Count 100 1 Normal
10 Power Cycle Count 100 151 Very good
10 GSense Error Rate 100 73 Very good
10 Power Off Retract Count 100 56 Very good
1 Hardware ECC Recovered 1 95113 Normal
10 Reallocated Event Count 252 0 Very good
10 Current Pending Sector 252 0 Very good
10 Offline Uncorrectable Sector Count 252 0 Very good
10 Ultra DMA CRC Error Rate 200 0 Very good
10 Write Error Rate 100 532 Very good
10 Soft Read Error Rate 252 0 Very good
2 Load Retry Count 100 11 Normal
10 Load Cycle Count 100 1321 Very good
NOTE: not all warnings are reflected on fitness and performance overall values as relevancy is based upon the settings from the hard disk manufacturer who is the best entity deputed to define such relationships.
NOTE : your hard disk has 1024 reallocated sectors (this value is very large and your hard disk should be replaced). Hard disks do have spare sectors (usually from 256 up to 1024) used to replace bad ones. This remapping operation is transparent to the end user. Anyway, this can lead to degradated performances (because remapped sectors are in different places of the disk than the original ones and the head needs additional moving). If reallocated sectors grow over time, you might encounter some serious troubles. A backup of the most important data is suggested anyway.
The overall fitness for this drive is 0%.
The overall performance for this drive is 100%.
Devo mandarlo in RMA? :help: :doh:
Your hard disk is a SAMSUNG HM160HI with firmware HH100-08.
The average temperature for this hard disk is 39C (MIN=28C MAX=52C) and yours is 34C.
Your hard disk's S.M.A.R.T. attributes are now being analyzed and a full report about the reliability, health and status of your hard disk is generated:
Error: Reallocated Sector Count has reached its threshold. Current value is 1 and threshold is 10.
According to S.M.A.R.T. specifications, your hard disk is failing and needs to be immediately replaced. Backup your data as soon as possible.
Warning: Reallocated Sector Count reached, in the past, its threshold. Worst value is 1 and threshold is 10.
Your hard disk is now being compared to real data used to define normal values for your specific hard disk model. This way, the analysis can automatically use proper operating ranges. The images give you an idea of how each attribute is within such range. Current and raw values are shown for easier reference for experienced users. There are 2228 hard disk models in the current archive.
Attribute Current Raw Overall
10 Raw Read Error Rate 100 45 Very good
10 Spin Up Time 252 1937 Very good
10 Start/Stop Count 100 285 Very good
0 Reallocated Sector Count 1 1024 Watch
Warning: Reallocated Sector Count is below the average limits (85-252).
10 Seek Error Rate 252 0 Very good
10 Seek Time Performance 252 0 Very good
10 Power On Hours Count 252 94 Very good
1 Spin Retry Count 100 1 Normal
10 Power Cycle Count 100 151 Very good
10 GSense Error Rate 100 73 Very good
10 Power Off Retract Count 100 56 Very good
1 Hardware ECC Recovered 1 95113 Normal
10 Reallocated Event Count 252 0 Very good
10 Current Pending Sector 252 0 Very good
10 Offline Uncorrectable Sector Count 252 0 Very good
10 Ultra DMA CRC Error Rate 200 0 Very good
10 Write Error Rate 100 532 Very good
10 Soft Read Error Rate 252 0 Very good
2 Load Retry Count 100 11 Normal
10 Load Cycle Count 100 1321 Very good
NOTE: not all warnings are reflected on fitness and performance overall values as relevancy is based upon the settings from the hard disk manufacturer who is the best entity deputed to define such relationships.
NOTE : your hard disk has 1024 reallocated sectors (this value is very large and your hard disk should be replaced). Hard disks do have spare sectors (usually from 256 up to 1024) used to replace bad ones. This remapping operation is transparent to the end user. Anyway, this can lead to degradated performances (because remapped sectors are in different places of the disk than the original ones and the head needs additional moving). If reallocated sectors grow over time, you might encounter some serious troubles. A backup of the most important data is suggested anyway.
The overall fitness for this drive is 0%.
The overall performance for this drive is 100%.
Devo mandarlo in RMA? :help: :doh: