usb 2.0

[phuntastiko]

ciao,
ho uan chiave certamente 2.0 e una scheda madre asus a7v600-x con usb 2.0 ma la velocità di transfer è quella di una 1.1
c'è modo di abilitare la 2.0 su linux?o verificare le effettive velocità selle porte?
grazie

[ilsensine]

ciao,
ho uan chiave certamente 2.0 e una scheda madre asus a7v600-x con usb 2.0 ma la velocità di transfer è quella di una 1.1
c'è modo di abilitare la 2.0 su linux?
Deve essere caricato il driver ehci-hcd, è molto strano se non ti è stato caricato automaticamente. Attento che non sempre tutte le porte hardware sono usb 2.0, alcune possono essere 1.1

[phuntastiko]

daniele@daniele:~$ grep -i usb /var/log/dmesg
[17179576.332000] usbcore: registered new driver usbfs
[17179576.332000] usbcore: registered new driver hub
[17179576.336000] USB Universal Host Controller Interface driver v3.0
[17179576.336000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179576.336000] usb usb1: configuration #1 chosen from 1 choice
[17179576.336000] hub 1-0:1.0: USB hub found
[17179576.444000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179576.444000] usb usb2: configuration #1 chosen from 1 choice
[17179576.444000] hub 2-0:1.0: USB hub found
[17179576.552000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179576.552000] usb usb3: configuration #1 chosen from 1 choice
[17179576.552000] hub 3-0:1.0: USB hub found
[17179576.660000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179576.660000] usb usb4: configuration #1 chosen from 1 choice
[17179576.660000] hub 4-0:1.0: USB hub found
[17179576.768000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179576.768000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.768000] usb usb5: configuration #1 chosen from 1 choice
[17179576.768000] hub 5-0:1.0: USB hub found
[17179578.176000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[17179578.392000] usb 2-1: configuration #1 chosen from 1 choice
[17179578.636000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[17179578.816000] usb 2-2: configuration #1 chosen from 1 choice
[17179589.988000] usbcore: registered new driver hiddev
[17179590.016000] input,hiddev96: USB HID v1.00 Mouse [MULTI-DIRECTION OPTICAL MOUSE] on usb-0000:00:10.1-2
[17179590.016000] usbcore: registered new driver usbhid
[17179590.016000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179590.016000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7104
[17179590.016000] usbcore: registered new driver usblp
[17179590.016000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
daniele@daniele:~$



significa che sono usb 2.0?
perchè ci ho messo 10 minuti per spostare 1,5 gb?

[ilsensine]

significa che sono usb 2.0?
perchè ci ho messo 10 minuti per spostare 1,5 gb?
Un pò bassina per un usb 2.0

Non sono sicuro, date le informazioni che hai inviato, che sia effettivamente connesso alle porte ehci.
Affinché il dispositivo vada in usb 2, devi ottenere qualcosa tipo:

usb 5-<id>: new high speed USB device using ehci_hcd and address <addr>

Dal tuo log, non vedo nulla sul bus 5 (quello di ehci_hcd).

[phuntastiko]

cosa posso fare?

[ilsensine]

Intando mandami il tuo dmesg completo con la chiavetta attaccata

[phuntastiko]

spero sia corretto, non so se intendevi questo:

daniele@daniele:~$ dmesg
[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001fffb000 (usable)
[17179569.184000] BIOS-e820: 000000001fffb000 - 000000001ffff000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 131067
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 126971 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS ) @ 0x000f5e30
[17179569.184000] ACPI: RSDT (v001 ASUS A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb000
[17179569.184000] ACPI: FADT (v001 ASUS A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb0b2
[17179569.184000] ACPI: BOOT (v001 ASUS A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb030
[17179569.184000] ACPI: MADT (v001 ASUS A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb058
[17179569.184000] ACPI: DSDT (v001 ASUS A7V600-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb1 ro quiet splash locale=it_IT
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 2100.471 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.884000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.884000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179569.896000] Memory: 509792k/524268k available (1911k kernel code, 13908k reserved, 1073k data, 308k init, 0k highmem)
[17179569.896000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.976000] Calibrating delay using timer specific routine.. 4204.69 BogoMIPS (lpj=8409395)
[17179569.976000] Security Framework v1.0.0 initialized
[17179569.976000] SELinux: Disabled at boot.
[17179569.976000] Mount-cache hash table entries: 512
[17179569.976000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.976000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.976000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.976000] CPU: L2 Cache: 512K (64 bytes/line)
[17179569.976000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179569.976000] Checking 'hlt' instruction... OK.
[17179569.992000] SMP alternatives: switching to UP code
[17179569.992000] Freeing SMP alternatives: 16k freed
[17179569.992000] checking if image is initramfs... it is
[17179570.448000] Freeing initrd memory: 5624k freed
[17179570.448000] ACPI: Core revision 20060707
[17179570.448000] ACPI: Looking for DSDT ... not found!
[17179570.452000] CPU0: AMD Athlon(TM) XP 3000+ stepping 00
[17179570.452000] Total of 1 processors activated (4204.69 BogoMIPS).
[17179570.452000] ENABLING IO-APIC IRQs
[17179570.452000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.596000] Brought up 1 CPUs
[17179570.596000] migration_cost=0
[17179570.596000] NET: Registered protocol family 16
[17179570.596000] EISA bus registered
[17179570.596000] ACPI: bus type pci registered
[17179570.596000] PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
[17179570.596000] PCI: Using configuration type 1
[17179570.596000] Setting up standard PCI resources
[17179570.608000] ACPI: Interpreter enabled
[17179570.608000] ACPI: Using IOAPIC for interrupt routing
[17179570.608000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[17179570.608000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179570.608000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12)
[17179570.608000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179570.612000] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12)
[17179570.612000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
[17179570.612000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
[17179570.612000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
[17179570.612000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.612000] PCI: Probing PCI hardware (bus 00)
[17179570.612000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179570.612000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[17179570.612000] PCI: Quirk-MSI-K8T Soundcard On
[17179570.612000] PCI: Unexpected Value in PCI-Register: no Change!
[17179570.612000] PCI: enabled onboard AC97/MC97 devices
[17179570.616000] Boot video device is 0000:01:00.0
[17179570.616000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.616000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179570.624000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.624000] pnp: PnP ACPI init
[17179570.628000] pnp: PnP ACPI: found 14 devices
[17179570.628000] PnPBIOS: Disabled by ACPI PNP
[17179570.628000] PCI: Using ACPI for IRQ routing
[17179570.628000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.636000] pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
[17179570.636000] pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
[17179570.636000] pnp: 00:0d: ioport range 0x290-0x297 has been reserved
[17179570.636000] pnp: 00:0d: ioport range 0x370-0x375 has been reserved
[17179570.636000] PCI: Bridge: 0000:00:01.0
[17179570.636000] IO window: d000-dfff
[17179570.636000] MEM window: df000000-dfefffff
[17179570.636000] PREFETCH window: dff00000-f7ffffff
[17179570.636000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.636000] NET: Registered protocol family 2
[17179570.676000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.676000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179570.676000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179570.676000] TCP: Hash tables configured (established 16384 bind 8192)
[17179570.676000] TCP reno registered
[17179570.676000] Simple Boot Flag at 0x3a set to 0x1
[17179570.676000] audit: initializing netlink socket (disabled)
[17179570.676000] audit(1175511763.676:1): initialized
[17179570.676000] VFS: Disk quotas dquot_6.5.1
[17179570.676000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.676000] Initializing Cryptographic API
[17179570.676000] io scheduler noop registered
[17179570.676000] io scheduler anticipatory registered
[17179570.676000] io scheduler deadline registered
[17179570.676000] io scheduler cfq registered (default)
[17179570.676000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179570.676000] isapnp: Scanning for PnP cards...
[17179571.028000] isapnp: No Plug & Play device found
[17179571.052000] Real Time Clock Driver v1.12ac
[17179571.052000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.052000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.052000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.052000] mice: PS/2 mouse device common for all mice
[17179571.052000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.052000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.052000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.052000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179571.052000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179571.056000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.056000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.056000] EISA: Probing bus 0 at eisa.0
[17179571.056000] Cannot allocate resource for EISA slot 7
[17179571.056000] Cannot allocate resource for EISA slot 8
[17179571.056000] EISA: Detected 0 cards.
[17179571.060000] TCP bic registered
[17179571.060000] NET: Registered protocol family 1
[17179571.060000] NET: Registered protocol family 8
[17179571.060000] NET: Registered protocol family 20
[17179571.060000] Using IPI No-Shortcut mode
[17179571.060000] ACPI: (supports S0 S1 S4 S5)
[17179571.060000] Freeing unused kernel memory: 308k freed
[17179571.140000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.212000] Capability LSM initialized
[17179572.532000] SCSI subsystem initialized
[17179572.536000] libata version 1.20 loaded.
[17179572.540000] sata_via 0000:00:0f.0: version 1.1
[17179572.540000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[17179572.540000] PCI: Via IRQ fixup for 0000:00:0f.0, from 0 to 9
[17179572.540000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179572.540000] ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA000 irq 169
[17179572.540000] ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0xA008 irq 169
[17179572.708000] scsi0 : sata_via
[17179572.876000] scsi1 : sata_via
[17179572.888000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179572.888000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179572.888000] PCI: Via IRQ fixup for 0000:00:0f.1, from 14 to 9
[17179572.888000] VP_IDE: chipset revision 6
[17179572.888000] VP_IDE: not 100% native mode: will probe irqs later
[17179572.888000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179572.888000] ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:DMA
[17179572.888000] ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:DMA
[17179572.888000] Probing IDE interface ide0...
[17179573.320000] hda: SAMSUNG SV0844D, ATA DISK drive
[17179573.604000] hdb: Maxtor 6Y080L0, ATA DISK drive
[17179573.664000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.676000] Probing IDE interface ide1...
[17179574.552000] hdc: LITE-ON DVDRW LDW-811S, ATAPI CD/DVD-ROM drive
[17179575.340000] hdd: ATAPI CDROM, ATAPI CD/DVD-ROM drive
[17179575.400000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.404000] hda: max request size: 128KiB
[17179575.404000] hda: 16514064 sectors (8455 MB) w/480KiB Cache, CHS=16383/16/63
[17179575.404000] hda: hda1
[17179575.420000] hdb: max request size: 128KiB
[17179575.420000] hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179575.420000] hdb: cache flushes supported
[17179575.420000] hdb: hdb1 hdb2 < hdb5 > hdb3
[17179575.476000] hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.476000] Uniform CD-ROM driver Revision: 3.20
[17179575.480000] hdd: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
[17179576.332000] usbcore: registered new driver usbfs
[17179576.332000] usbcore: registered new driver hub
[17179576.336000] USB Universal Host Controller Interface driver v3.0
[17179576.336000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[17179576.336000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 1
[17179576.336000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179576.336000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179576.336000] uhci_hcd 0000:00:10.0: irq 177, io base 0x00009000
[17179576.336000] usb usb1: configuration #1 chosen from 1 choice
[17179576.336000] hub 1-0:1.0: USB hub found
[17179576.336000] hub 1-0:1.0: 2 ports detected
[17179576.444000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[17179576.444000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 1
[17179576.444000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179576.444000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179576.444000] uhci_hcd 0000:00:10.1: irq 177, io base 0x00008800
[17179576.444000] usb usb2: configuration #1 chosen from 1 choice
[17179576.444000] hub 2-0:1.0: USB hub found
[17179576.444000] hub 2-0:1.0: 2 ports detected
[17179576.552000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
[17179576.552000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 1
[17179576.552000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179576.552000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179576.552000] uhci_hcd 0000:00:10.2: irq 177, io base 0x00008400
[17179576.552000] usb usb3: configuration #1 chosen from 1 choice
[17179576.552000] hub 3-0:1.0: USB hub found
[17179576.552000] hub 3-0:1.0: 2 ports detected
[17179576.660000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
[17179576.660000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 1
[17179576.660000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179576.660000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179576.660000] uhci_hcd 0000:00:10.3: irq 177, io base 0x00008000
[17179576.660000] usb usb4: configuration #1 chosen from 1 choice
[17179576.660000] hub 4-0:1.0: USB hub found
[17179576.660000] hub 4-0:1.0: 2 ports detected
[17179576.768000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[17179576.768000] PCI: Via IRQ fixup for 0000:00:10.4, from 0 to 1
[17179576.768000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179576.768000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179576.768000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xde800000
[17179576.768000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.768000] usb usb5: configuration #1 chosen from 1 choice
[17179576.768000] hub 5-0:1.0: USB hub found
[17179576.768000] hub 5-0:1.0: 8 ports detected
[17179576.960000] Attempting manual resume
[17179577.004000] kjournald starting. Commit interval 5 seconds
[17179577.004000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.176000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[17179578.392000] usb 2-1: configuration #1 chosen from 1 choice
[17179578.636000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[17179578.816000] usb 2-2: configuration #1 chosen from 1 choice
[17179588.528000] Floppy drive(s): fd0 is 1.44M
[17179588.552000] FDC 0 is a post-1991 82077
[17179589.508000] input: PC Speaker as /class/input/input1
[17179589.520000] Linux agpgart interface v0.101 (c) Dave Jones
[17179589.524000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[17179589.528000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179589.596000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.600000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179589.648000] parport: PnPBIOS parport detected.
[17179589.648000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179589.756000] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[17179589.756000] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 185
[17179589.756000] PCI: Via IRQ fixup for 0000:00:11.6, from 0 to 9
[17179589.812000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179589.988000] usbcore: registered new driver hiddev
[17179590.016000] input: MULTI-DIRECTION OPTICAL MOUSE as /class/input/input2
[17179590.016000] input,hiddev96: USB HID v1.00 Mouse [MULTI-DIRECTION OPTICAL MOUSE] on usb-0000:00:10.1-2
[17179590.016000] usbcore: registered new driver usbhid
[17179590.016000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179590.016000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7104
[17179590.016000] usbcore: registered new driver usblp
[17179590.016000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179590.064000] ts: Compaq touchscreen protocol output
[17179590.516000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[17179591.020000] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[17179591.020000] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[17179591.024000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 193
[17179591.024000] PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 1
[17179591.024000] eth0: VIA Rhine II at 0x17800, 00:11:2f:41:86:15, IRQ 193.
[17179591.024000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[17179591.024000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 201
[17179591.120000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179591.908000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
[17179591.908000] PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 9
[17179591.908000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179592.168000] NET: Registered protocol family 17
[17179592.424000] codec_read: codec 0 is not valid [0xfe0000]
[17179592.428000] codec_read: codec 0 is not valid [0xfe0000]
[17179592.436000] codec_read: codec 0 is not valid [0xfe0000]
[17179592.444000] codec_read: codec 0 is not valid [0xfe0000]
[17179592.688000] lp0: using parport0 (interrupt-driven).
[17179592.744000] fuse init (API version 7.6)
[17179592.800000] Adding 1502036k swap on /dev/disk/by-uuid/d48ad2de-d5fa-482c-baa2-0f0401235b77. Priority:-1 extents:1 across:1502036k
[17179785.632000] EXT3 FS on hdb1, internal journal
[17179786.316000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179786.400000] NTFS volume version 3.1.
[17179791.816000] CSLIP: code copyright 1989 Regents of the University of California
[17179791.820000] PPP generic driver version 2.4.2
[17179791.860000] NET: Registered protocol family 10
[17179791.860000] lo: Disabled Privacy Extensions
[17179791.860000] IPv6 over IPv4 tunneling driver
[17179791.996000] NET: Registered protocol family 24
[17179802.420000] eth0: no IPv6 routers present
[17179812.392000] ip_tables: (C) 2000-2006 Netfilter Core Team
[17179821.328000] ACPI: Power Button (FF) [PWRF]
[17179821.328000] ACPI: Power Button (CM) [PWRB]
[17179821.428000] ibm_acpi: ec object not found
[17179821.452000] pcc_acpi: loading...
[17179824.904000] [drm] Initialized drm 1.0.1 20051102
[17179824.912000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
[17179824.912000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[17179826.136000] mtrr: 0xe0000000,0x10000000 overlaps existing 0xe0000000,0x8000000
[17179826.136000] mtrr: 0xe0000000,0x10000000 overlaps existing 0xe0000000,0x8000000
[17179826.136000] mtrr: 0xe0000000,0x10000000 overlaps existing 0xe0000000,0x8000000
[17179826.136000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179826.136000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179826.136000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[17179826.492000] [drm] Setting GART location based on new memory map
[17179826.492000] [drm] Loading R200 Microcode
[17179826.492000] [drm] writeback test succeeded in 1 usecs
[17179828.904000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179828.904000] apm: overridden by ACPI.
[17179836.300000] vmmon: module license 'unspecified' taints kernel.
[17179836.304000] /dev/vmmon[4514]: Module vmmon: registered with major=10 minor=165
[17179836.304000] /dev/vmmon[4514]: Module vmmon: initialized
[17179836.468000] Bluetooth: Core ver 2.8
[17179836.468000] NET: Registered protocol family 31
[17179836.468000] Bluetooth: HCI device and connection manager initialized
[17179836.468000] Bluetooth: HCI socket layer initialized
[17179836.496000] Bluetooth: L2CAP ver 2.8
[17179836.496000] Bluetooth: L2CAP socket layer initialized
[17179836.596000] Bluetooth: RFCOMM socket layer initialized
[17179836.596000] Bluetooth: RFCOMM TTY layer initialized
[17179836.596000] Bluetooth: RFCOMM ver 1.7
[17186663.228000] usb 5-1: new high speed USB device using ehci_hcd and address 4
[17186663.364000] usb 5-1: configuration #1 chosen from 1 choice
[17186663.800000] usbcore: registered new driver libusual
[17186663.860000] Initializing USB Mass Storage driver...
[17186663.860000] scsi2 : SCSI emulation for USB Mass Storage devices
[17186663.860000] usb-storage: device found at 4
[17186663.860000] usb-storage: waiting for device to settle before scanning
[17186663.860000] usbcore: registered new driver usb-storage
[17186663.860000] USB Mass Storage support registered.
[17186668.860000] usb-storage: device scan complete
[17186668.860000] Vendor: Kingston Model: DataTraveler 2.0 Rev: PMAP
[17186668.860000] Type: Direct-Access ANSI SCSI revision: 00
[17186669.164000] SCSI device sda: 4030464 512-byte hdwr sectors (2064 MB)
[17186669.164000] sda: Write Protect is off
[17186669.164000] sda: Mode Sense: 23 00 00 00
[17186669.164000] sda: assuming drive cache: write through
[17186669.168000] SCSI device sda: 4030464 512-byte hdwr sectors (2064 MB)
[17186669.168000] sda: Write Protect is off
[17186669.168000] sda: Mode Sense: 23 00 00 00
[17186669.168000] sda: assuming drive cache: write through
[17186669.168000] sda: sda1
[17186669.172000] sd 2:0:0:0: Attached scsi removable disk sda
[17186669.180000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[17186670.624000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17187824.992000] usb 5-1: USB disconnect, address 4
[17191012.864000] usb 5-1: new high speed USB device using ehci_hcd and address 5
[17191013.000000] usb 5-1: configuration #1 chosen from 1 choice
[17191013.000000] scsi3 : SCSI emulation for USB Mass Storage devices
[17191013.000000] usb-storage: device found at 5
[17191013.000000] usb-storage: waiting for device to settle before scanning
[17191018.000000] usb-storage: device scan complete
[17191018.000000] Vendor: Kingston Model: DataTraveler 2.0 Rev: PMAP
[17191018.000000] Type: Direct-Access ANSI SCSI revision: 00
[17191018.256000] SCSI device sda: 4030464 512-byte hdwr sectors (2064 MB)
[17191018.256000] sda: Write Protect is off
[17191018.256000] sda: Mode Sense: 23 00 00 00
[17191018.256000] sda: assuming drive cache: write through
[17191018.256000] SCSI device sda: 4030464 512-byte hdwr sectors (2064 MB)
[17191018.260000] sda: Write Protect is off
[17191018.260000] sda: Mode Sense: 23 00 00 00
[17191018.260000] sda: assuming drive cache: write through
[17191018.260000] sda: sda1
[17191018.260000] sd 3:0:0:0: Attached scsi removable disk sda
[17191018.260000] sd 3:0:0:0: Attached scsi generic sg0 type 0
[17191019.440000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17193524.604000] usb 5-1: USB disconnect, address 5
[17194411.408000] usb 5-1: new high speed USB device using ehci_hcd and address 6
[17194411.540000] usb 5-1: configuration #1 chosen from 1 choice
[17194411.544000] scsi4 : SCSI emulation for USB Mass Storage devices
[17194411.544000] usb-storage: device found at 6
[17194411.544000] usb-storage: waiting for device to settle before scanning
[17194416.544000] usb-storage: device scan complete
[17194416.544000] Vendor: Kingston Model: DataTraveler 2.0 Rev: PMAP
[17194416.544000] Type: Direct-Access ANSI SCSI revision: 00
[17194417.004000] SCSI device sda: 4030464 512-byte hdwr sectors (2064 MB)
[17194417.004000] sda: Write Protect is off
[17194417.004000] sda: Mode Sense: 23 00 00 00
[17194417.004000] sda: assuming drive cache: write through
[17194417.004000] SCSI device sda: 4030464 512-byte hdwr sectors (2064 MB)
[17194417.008000] sda: Write Protect is off
[17194417.008000] sda: Mode Sense: 23 00 00 00
[17194417.008000] sda: assuming drive cache: write through
[17194417.008000] sda: sda1
[17194417.008000] sd 4:0:0:0: Attached scsi removable disk sda
[17194417.008000] sd 4:0:0:0: Attached scsi generic sg0 type 0
[17194417.704000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
daniele@daniele:~$

[ilsensine]

Sembrerebbe tutto ok.
Cosa riporta hdparm -t /dev/sda?

[phuntastiko]

daniele@daniele:~$ hdparm -t /dev/sda

/dev/sda:
Timing buffered disk reads: 28 MB in 3.21 seconds = 8.73 MB/sec
BLKFLSBUF failed: Permission denied
daniele@daniele:~$

[ilsensine]

La velocità raw è di 70Mbit/sec, non credo che puoi pretendere molto di più da un dispositivo di quel tipo.
Però la velocità del file system è decisamente inferiore (1.5GB/10min = ~20Mbit/sec); cosa riporta cat /proc/self/mounts quando il dispositivo viene "montato"?

[phuntastiko]

cosa intendi quando viene montato?
con la chiavetta inserita:

daniele@daniele:~$ cat /proc/self/mounts
rootfs / rootfs rw 0 0
none /sys sysfs rw,nosuid,nodev,noexec 0 0
none /proc proc rw,nosuid,nodev,noexec 0 0
udev /dev tmpfs rw 0 0
/dev/hdb1 / ext3 rw,data=ordered 0 0
/dev/hdb1 /dev/.static/dev ext3 rw,data=ordered 0 0
tmpfs /var/run tmpfs rw,nosuid,nodev,noexec 0 0
tmpfs /var/lock tmpfs rw,nosuid,nodev,noexec 0 0
tmpfs /lib/modules/2.6.17-11-generic/volatile tmpfs rw 0 0
tmpfs /dev/shm tmpfs rw 0 0
devpts /dev/pts devpts rw 0 0
usbfs /dev/bus/usb/.usbfs usbfs rw 0 0
udev /proc/bus/usb tmpfs rw 0 0
usbfs /proc/bus/usb/.usbfs usbfs rw 0 0
tmpfs /var/run tmpfs rw,nosuid,nodev,noexec 0 0
tmpfs /var/lock tmpfs rw,nosuid,nodev,noexec 0 0
/dev/hda1 /media/Windows ntfs ro,uid=0,gid=0,umask=00,nls=cp437,errors=continue,mft_zone_multiplier=1 0 0
/dev/hdb3 /media/fat32 vfat rw,fmask=0000,dmask=0000,codepage=cp437,iocharset=iso8859-1 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
/dev/sda1 /media/KINGSTON vfat rw,nosuid,nodev,uid=1000,gid=1000,fmask=0077,dmask=0077,codepage=cp437,iocharset=utf8,shortname=mixed,quiet 0 0

[ilsensine]

Niente sync o simili...

Forse la differenza è dovuta al fatto che la scrittura su flash è di norma molto più lenta della lettura. Per averne la certezza occorrerebbe fare un test di scrittura sul device, bypassando il file system, ma sarebbe un procedimento distruttivo.

Puoi provare il trasferimento di un grosso file da windows e vedere quanto ci mette? (compreso l'eventuale tempo per "smontare" il dispositivo, se non trascurabile)

[phuntastiko]

ho win ma senza sp,quindi l'usb è sicuramente 1.1
a meno che a te non interessi questo parametro,ma dato che è quello di cui si discute...

[ilsensine]

No no, in usb 1.1 dovresti avere velocità addirittura più ridotte. Provare per credere, rimuovendo il driver ehci_hcd.

Credo che sia una limitazione nella velocità in scrittura della flash, comunque. Se rileggi il file da 1.5GB, dovresti osservare una velocità nettamente maggiore, se vuoi provare...

[phuntastiko]

intendi leggerlo dalla flash o spostarlo sull'hd?
come misuro la velocità?
grazie di tutto

[ilsensine]

Con un bel
time cat /media/KINGSTON/Grosso_file.avi > /dev/null

[phuntastiko]

il risultato:

daniele@daniele:~$ time cat /media/KINGSTON/a.avi > /dev/null
real 1m38.223s
user 0m0.036s
sys 0m2.228s


l'avi è di 787 MB. serve altro?

[ilsensine]

il risultato:

daniele@daniele:~$ time cat /media/KINGSTON/a.avi > /dev/null
real 1m38.223s
user 0m0.036s
sys 0m2.228s


l'avi è di 787 MB. serve altro?
...quindi leggi a 64Mbit/sec, quasi la velocità raw.

Quindi non è un problema di connessione usb, ma di lentezza di scrittura della flash della tua penna.

[phuntastiko]

uff,e dire che l'ho comprata ieri apposta perchè era usb2.immagino che non si possa fare altro,vero?
grazie di tutto lo sbattimento