mast samsung sh-w162c: gran pacco..come faccio?

[frank89]

ho appena comprato un samsung shw162c..montato come master (con un lett dvd slave) ma non riesco a mast neanche un cd..come è possibile?per il momento ho aggiornato il firmaware e l'aspi, ho provato con vari prog di masterizzazione e dopo aver iniziato la masterizzazione sento che il cd inizia a girare ma poco dopo qualche minuto mi danno un problema di questo tipo: "power on or bus device reset occured" o messaggi simili riguardanti il reset del drive durante la masterizzazione...sul cd non ci scrive neanche niente, fa solo finta e mi da l'errore..

se potete aiutarmi mi farebbe molto piacere, visto che ho anche una certa urgenza del masterizzatore..grazie

[ARSENIO_LUPEN]

che sistema operativo hai e che soft usi per masterizzare?
poi hai fatto copie al volo oppure risiede sul hd e vuoi masterizare quello
piu dati dai piu e facile aiutarti
p.s. benvenuto nel forum :)

[frank89]

allora..per adesso ho provato un'immagine con blindwrite e dei dati da hard disk con nero 7(sia multisessione che chiudendo, sia track che disc)..e anche col bagaglio di windows xp pro, ma neanche ci speravo, cmq col mast cd che avevo prima tutto funzionava a meraviglia..
se serve posso fare altre prove, intanto attacco il log di nero se per caso qualcuno riesce a capirci qualcosa:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9.20.56
ahead WinASPI: File 'D:\Programmi\nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13.54.32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS10 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 2.21 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162C atapi Port 1 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162C E: CDRom0
IDE DVD-ROM 16X F: CDRom1
Generic DVD-ROM G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 895MB (916976kB)
Free physical memory: 460MB (471632kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.11.2005
CD-ROM (ISO)
21.41.08 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

21.41.23 #2 Text 0 File Burncd.cpp, Line 3007
TSSTcorp CD/DVDW SH-W162C
Super Link attivato

21.41.23 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

21.41.23 #4 Text 0 File Reader.cpp, Line 124
Reader running

21.41.23 #5 Text 0 File Writer.cpp, Line 113
Writer E: TSSTcorp CD/DVDW SH-W162C running

21.41.23 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

21.41.32 #7 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using CD-R/RW media

21.41.40 #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 164035 ( 36:29.10)

21.41.40 #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

21.41.40 #10 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: TSSTcorp CD/DVDW SH-W162C

21.41.40 #11 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21.41.40 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 164036 (164036) = #164036/36:27.11
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 164036 blocks [E: TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

21.41.40 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 336252928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
164036 | lead-out | 1 | 0x41 | 0x00

21.41.40 #14 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

21.41.40 #15 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

21.41.40 #16 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

21.41.40 #17 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

21.41.40 #18 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 40x (6.000 KB/s)

21.41.40 #19 SPTI -1189 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x0b268000: Len x4000

21.41.40 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21.41.40 #21 Text 0 File MMC.cpp, Line 16828
StartDAO : CD-Text - Off

21.41.40 #22 Text 0 File MMC.cpp, Line 21541
Set BUFE: Super Link -> ON

21.41.41 #23 Text 0 File MMC.cpp, Line 17059
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 24 1d 0b

21.44.42 #24 SPTI -1114 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 FF FF FF 6A 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x0ae60000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

21.44.42 #25 CDR -1114 File Writer.cpp, Line 302
Reset occurred
E: TSSTcorp CD/DVDW SH-W162C

21.44.42 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21.44.42 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

21.44.43 #28 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 40x (6.000 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8.53.02
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 14/09/2005 20.17.44 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 0, size=101504 bytes, created 30/08/2005 17.24.38 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[ARSENIO_LUPEN]

prova a masterizare su un cd riscrivibile oppure comunque aq bassa velocita non a 40 x
non vorrei che il problema stia sulla velocita

[matteo1]

il drive virtuale ti dà quel problema,che si traduce in un dma off del drive virtuale e un errore di IRQ;disinstalla il daemon tools,poi disinstalla anche incd e il programma di prassi-veritas.Come ho scritto decina di altre volte i driver di nero sono incompatibili con quelli di prassi/veritas.

[frank89]

deamon a volte mi serve, devo proprio disinstallarlo o mi basta disattivare il drive virtuale?poi prassi veritas non so prprio cosa sia, come faccio a disinstallarlo?incd l'avevo già disinstallato quando ho fatto la prova, perchè c'è ancora?

adesso faccio un po' di prove e vi aggiorno sui risultati il prima possibile
grazie

[frank89]

ecco l'ultimo log

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9.20.56
ahead WinASPI: File 'D:\Programmi\nero\Nero 7\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12.54.32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS10 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 2.21 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162C atapi Port 1 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162C E: CDRom0
IDE DVD-ROM 16X F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 895MB (916976kB)
Free physical memory: 401MB (410900kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.11.2005
CD-ROM (ISO)
17.08.41 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

17.08.55 #2 Text 0 File Burncd.cpp, Line 3008
TSSTcorp CD/DVDW SH-W162C
Super Link attivato

17.08.55 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

17.08.55 #4 Text 0 File Reader.cpp, Line 124
Reader running

17.08.55 #5 Text 0 File Writer.cpp, Line 113
Writer E: TSSTcorp CD/DVDW SH-W162C running

17.08.55 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

17.09.02 #7 Text 0 File Burncd.cpp, Line 3302
Turn on Track-At-Once, using CD-R/RW media

17.09.09 #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 162631 ( 36:10.31)

17.09.09 #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

17.09.09 #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: TSSTcorp CD/DVDW SH-W162C

17.09.09 #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17.09.09 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 162632 (162632) = #162632/36:8.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 162630 blocks [E: TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

17.09.09 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TSSTcorp CD/DVDW SH-W162C] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 333377536, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
162632 | lead-out | 1 | 0x41 | 0x00

17.09.09 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 162632 -> 162630.

17.09.09 #15 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17.09.09 #16 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

17.09.09 #17 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

17.09.09 #18 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

17.09.09 #19 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 16x (2.400 KB/s)

17.09.09 #20 SPTI -1189 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x0c72d000: Len x4000

17.09.09 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17.09.09 #22 Text 0 File MMC.cpp, Line 21611
Set BUFE: Super Link -> ON

17.10.41 #23 SPTI -1114 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x061f0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

17.10.41 #24 CDR -1114 File Writer.cpp, Line 302
Reset occurred
E: TSSTcorp CD/DVDW SH-W162C

17.10.41 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17.10.41 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

17.10.41 #27 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
E: TSSTcorp CD/DVDW SH-W162C

17.10.41 #28 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

17.10.41 #29 Text 0 File MMC.cpp, Line 16379
<TSSTcorpCD/DVDW SH-W162C> start Close Session

17.10.41 #30 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 16x (2.400 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8.53.02

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

anche non capendone niente c'è una linea che mi insospettisce, vi dice qualcosa?

Bus Type : default (0) -> ATAPI, detected: ?

spero che abbiate altre idee perchè non ci sono ancora i risultati...e vorrei riuscirea farlo funzionare prima o poi

[frank89]

non so se può essere d'aiuto, ma ho riattacato il buon vecchio lg perchè avevo bisogno di mast dei cd e funziona...forse può escludere dei rpoblemi software, no?

[frank89]

niente?

[xatto]

stesso problema anche per me con il modello esteno.....

non parte neanche la mast......si ferma al lead-in ...mi sa che oggi lo vado a cambiare

[matteo1]

io l'ho preso sottocosto,nessun problema con cd o dvd.
Però quando l'ho installato mi ha bloccato il pc al bios;ho dovuto inserire la piattina IDE a caldo :eek:

[Hwupgr]

Avete il firmware TS7 o TS10?