[Ubuntu] HWupgrade Clan

[macpeo]

continua l'odissea synaptic.
ho cambiato la sources.list di default con quella trovata qui: http://www.alessandropagano.net/wiki...untuRepository
(questo per non dover reinserire tutti i repositary perduti).
ora reinstalla un grande numero di pacchetti.
l'unico problema è che non può aggiornare da alcuni server perchè non trova le chiavi pubbliche.

Err http://public.planetmirror.com breezy/free Packages
  302 Found [IP: 203.16.234.19 80]
Err http://public.planetmirror.com breezy/non-free Packages
  302 Found [IP: 203.16.234.19 80]
Hit http://mirror.optus.net breezy-updates/main Packages
Hit http://wine.sourceforge.net binary/ Packages
Hit http://mirror.optus.net breezy-updates/restricted Packages
Hit http://mirror.optus.net breezy-updates/universe Packages
Hit http://mirror.optus.net breezy-updates/multiverse Packages
Hit http://mirror.optus.net breezy-backports/main Packages
Hit http://mirror.optus.net breezy-backports/restricted Packages
Hit http://mirror.optus.net breezy-backports/universe Packages
Hit http://mirror.optus.net breezy-backports/multiverse Packages
Scaricato 73,0kB in 42s (1724B/s)
Impossibile ottenere http://public.planetmirror.com/pub/plf/ubuntu/plf/dists/breezy/free/binary-i386/Packages.gz  302 Found [IP: 203.16.234.19 80]
Impossibile ottenere http://public.planetmirror.com/pub/plf/ubuntu/plf/dists/breezy/non-free/binary-i386/Packages.gz  302 Found [IP: 203.16.234.19 80]
Lettura della lista dei pacchetti in corso... Fatto
W: GPG error: http://repos.knio.it etch Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY CBE5831435A92053
W: GPG error: http://kubuntu.org breezy Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY A506E6D4DD4D5088
W: GPG error: http://kubuntu.org breezy Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY A506E6D4DD4D5088
W: GPG error: http://kubuntu.org breezy Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY A506E6D4DD4D5088
W: GPG error: http://kubuntu.org breezy Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY A506E6D4DD4D5088
W: GPG error: http://eyagi.bpa.nu breezy Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY 0027CEFA4B6E7209
W: GPG error: http://koti.mbnet.fi breezy/ Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY E8DDB29170188C3B
W: GPG error: ftp://ftp.nerim.net etch Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY 07DC563D1F41B907
W: GPG error: ftp://cipherfunk.org breezy Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY 4CF19C3233BAC1B3
W: GPG error: ftp://ftp.nerim.net experimental Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY 07DC563D1F41B907
W: GPG error: ftp://ftp.nerim.net sarge Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY 07DC563D1F41B907
W: GPG error: ftp://ftp.nerim.net sid Release: Le seguenti firme non possono essere verificate a causa della non disponibilità della chiave pubblica: NO_PUBKEY 07DC563D1F41B907
W: È consigliabile eseguire apt-get update per correggere questi problemi
E: Impossibile scaricare alcune file di indice, essi verranno ignorati, oppure si useranno quelli precedenti.
peo@ubuntu:~$

come si risolve......

[CARVASIN]

Originariamente inviato da macpeo

continua l'odissea synaptic.
ho cambiato la sources.list di default con quella trovata qui: http://www.alessandropagano.net/wiki...untuRepository
(questo per non dover reinserire tutti i repositary perduti).
ora reinstalla un grande numero di pacchetti.
l'unico problema è che non può aggiornare da alcuni server perchè non trova le chiavi pubbliche.
come si risolve......

la chiave pubblica di per se non è un gran problema...se non la hai synaptic "vede" i programmmi che scarichi da questi rep come pacchetti "non autenticati"; in ogni caso puoi installare i pacchetti

ciao

[macpeo]

credevo che senza la chiave pubblica non scaricasse i pacchetti.
scusa se continuo a ma synaptic mi restituisce questo:

W: Impossibile controllare la lista dei pacchetti sorgente http://public.planetmirror.com breezy/free Packages (/var/lib/apt/lists/public.planetmirror.com_pub_plf_ubuntu_plf_dists_breezy_free_binary-i386_Packages) - stat (2 No such file or directory)
W: Impossibile controllare la lista dei pacchetti sorgente http://public.planetmirror.com breezy/non-free Packages (/var/lib/apt/lists/public.planetmirror.com_pub_plf_ubuntu_plf_dists_breezy_non-free_binary-i386_Packages) - stat (2 No such file or directory)

èuna cosa trascurabile

[CARVASIN]

Originariamente inviato da macpeo

credevo che senza la chiave pubblica non scaricasse i pacchetti.
scusa se continuo a ma synaptic mi restituisce questo:

W: Impossibile controllare la lista dei pacchetti sorgente http://public.planetmirror.com breezy/free Packages (/var/lib/apt/lists/public.planetmirror.com_pub_plf_ubuntu_plf_dists_breezy_free_binary-i386_Packages) - stat (2 No such file or directory)
W: Impossibile controllare la lista dei pacchetti sorgente http://public.planetmirror.com breezy/non-free Packages (/var/lib/apt/lists/public.planetmirror.com_pub_plf_ubuntu_plf_dists_breezy_non-free_binary-i386_Packages) - stat (2 No such file or directory)

èuna cosa trascurabile

credo ci siano problemi con il rep...ad esempio (ma non sono sicuro): il rep è down. non è cosi raro che capiti (soprattutti in questi rep non ufficiali)

ciao

[macpeo]

ok, lo lascio stare, grazie per l'aiuto

[CARVASIN]

Originariamente inviato da macpeo

ok, lo lascio stare, grazie per l'aiuto

figurati...sempre che io abbia detto cose giuste!!

[macpeo]

speriamo

[NeoNum6]

Originariamente inviato da NeoNum6

io ho installato ubuntu con il dual boot con windows. fin qui tutto bene, però mi trovo con priorità nell'avvio prima ubuntu, e poi win...insomma il problema è che se dimentico di selezionare windows all'avvio parte ubuntu...e siccome vorrei suiccedesse il contrario volevo chiedervi se è una cosa semplice e se è possibile cambiare le cose... grazie ciao

ho seguito le istruzione date qui http://ubuntu.mondonerd.com/ ...ma non è cambiato nulla!

[CARVASIN]

Originariamente inviato da NeoNum6

ho seguito le istruzione date qui http://ubuntu.mondonerd.com/ ...ma non è cambiato nulla!

dai

sudo gedit /boot/grub/menu.lst

all'interno di questo file c'è la voce "default" (è una delle prime linee), accanto alla voce c'è un numero che corrisponde alla linea su cui si "posa" grub di default nella schermata per il boot del sistema. edita il numero affinchè trovi la soluzione giusta. ci sono anche altre voce tra cui quella per cambiare il numero dei secondi del conto alla rovescia

per maggiori info guarda QUI

ciao

PS: il link da te postato tratta della prima versione di ubuntu...se guardi nel primo post ci sono un'infinità di link che rimandano a delle guide, per breezy, molto complete (almeno per iniziare)

[NeoNum6]

risolto CARVASIN grazie

[LaToX]

Salve, sono un'utente Suse e vorrei passare ad Ubuntu.
ho però un problema all'installazione ovvero inristo il cd, installo il sistema, mi chiede di togliere il cd e di riavviare. Al riavvio mi installa il sistema operativo, poi viene lo screen di gnome in cui devo inserire utente e passwd per avviare la mia sessione. Inseriti correttamente (ho fatto un sacco di prove anche tentando di entrare come root) si chiude lo screen e mi si blocca il tutto in uno screen vuoto, si muove solamente il mouse. Cliccando con i vari tasti nn succede nulla. non succede nulla neanche con la combinazione CTRL+ALT+BackSpace.

Spero che qualcuno possa risolvere questo problema, è da un po' che ci sono dietro e anche on-line, nei manuali, nn ho trovato nulla.

Vi posto quì di seguito il file user.log se può esservi utile altrimenti ditemi voi se vi devo postare quancos'altro.

Sep 14 22:39:53 localhost gconfd (root-22776): starting (version 2.12.0), pid 22776 user 'root'
Sep 14 22:39:53 localhost gconfd (root-22776): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0
Sep 14 22:39:59 localhost gconfd (root-22776): Exiting
Sep 14 22:40:06 localhost gconfd (root-23431): starting (version 2.12.0), pid 23431 user 'root'
Sep 14 22:40:06 localhost gconfd (root-23431): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0
Sep 14 22:40:36 localhost gconfd (root-23431): GConf server is not in use, shutting down.
Sep 14 22:40:36 localhost gconfd (root-23431): Exiting
Sep 14 22:41:29 localhost hp: unable to open /etc/hp/hplip.conf: No such file or directory: prnt/hpijs/hplip_api.c 56
Sep 14 22:41:37 localhost gconfd (root-25042): starting (version 2.12.0), pid 25042 user 'root'
Sep 14 22:41:37 localhost gconfd (root-25042): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0
Sep 14 22:42:07 localhost gconfd (root-25042): GConf server is not in use, shutting down.
Sep 14 22:42:07 localhost gconfd (root-25042): Exiting
Sep 14 22:42:20 localhost hp: unable to open /etc/hp/hplip.conf: No such file or directory: prnt/hpijs/hplip_api.c 56
Sep 14 22:42:30 localhost gconfd (root-26270): starting (version 2.12.0), pid 26270 user 'root'
Sep 14 22:42:30 localhost gconfd (root-26270): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Sep 14 22:42:30 localhost gconfd (root-26270): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Sep 14 22:42:30 localhost gconfd (root-26270): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2
Sep 14 22:42:30 localhost gconfd (root-26270): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Sep 14 22:42:30 localhost gconfd (root-26270): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Sep 14 22:42:30 localhost gconfd (root-26270): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Sep 14 22:42:30 localhost gconfd (root-26270): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Sep 14 22:42:30 localhost gconfd (root-26270): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Sep 14 22:42:32 localhost gconfd (root-26270): Exiting
Sep 14 22:42:43 localhost gconfd (root-26955): starting (version 2.12.0), pid 26955 user 'root'
Sep 14 22:42:43 localhost gconfd (root-26955): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Sep 14 22:42:43 localhost gconfd (root-26955): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Sep 14 22:42:43 localhost gconfd (root-26955): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2
Sep 14 22:42:43 localhost gconfd (root-26955): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Sep 14 22:42:43 localhost gconfd (root-26955): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Sep 14 22:42:43 localhost gconfd (root-26955): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Sep 14 22:42:43 localhost gconfd (root-26955): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Sep 14 22:42:43 localhost gconfd (root-26955): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Sep 14 22:42:45 localhost gconfd (root-26955): Exiting
Sep 14 22:42:47 localhost gconfd (root-27040): starting (version 2.12.0), pid 27040 user 'root'
Sep 14 22:42:47 localhost gconfd (root-27040): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Sep 14 22:42:47 localhost gconfd (root-27040): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Sep 14 22:42:47 localhost gconfd (root-27040): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2
Sep 14 22:42:47 localhost gconfd (root-27040): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Sep 14 22:42:47 localhost gconfd (root-27040): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Sep 14 22:42:47 localhost gconfd (root-27040): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Sep 14 22:42:47 localhost gconfd (root-27040): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Sep 14 22:42:47 localhost gconfd (root-27040): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Sep 14 22:42:50 localhost gconfd (root-27040): Exiting
Sep 14 22:42:51 localhost hpiod: 0.9.5 accepting connections at 32771...
Sep 14 22:45:00 localhost hpiod: ParDevice::nibble_read failed: Input/output error
Sep 14 22:45:00 localhost hpiod: unable to ParDevice:pen hp:/par/ANY?device=/dev/parport3: No such file or directory: io/hpiod/ppdevice.cpp 827
Sep 14 22:45:53 localhost gconfd (root-28199): starting (version 2.12.0), pid 28199 user 'root'
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Sep 14 22:46:23 localhost gconfd (root-28199): GConf server is not in use, shutting down.
Sep 14 22:46:23 localhost gconfd (root-28199): Exiting

[Al Azif]

Devi postare il kern.log o messages o syslog

p.s.: sono latitante perchè sono a 56k finchè tiscali non mi attiva l'adsl

[CARVASIN]

Originariamente inviato da Al Azif

Devi postare il kern.log o messages o syslog

p.s.: sono latitante perchè sono a 56k finchè tiscali non mi attiva l'adsl

tranquillo ci sono io



PS: sei passato da alice a tiscali per caso?

[LaToX]

Vi posto di seguito l'ultima parte di messages

Preconfiguring packages ...
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/11.9kB of archives.
After unpacking 98.3kB of additional disk space will be used.
tar: ./postrm: time stamp 2005-09-22 13:11:15 is 665848 s in the future
tar: ./control: time stamp 2005-09-22 13:11:16 is 665849 s in the future
tar: .: time stamp 2005-09-22 13:11:16 is 665849 s in the future
Selecting previously deselected package installation-report.
(Reading database ... 12069 files and directories currently installed.)
Unpacking installation-report (from .../installation-report_2.6ubuntu2_all.deb) ...
Setting up installation-report (2.6ubuntu2) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "C.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale 'it_IT.UTF-8' not available
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "C.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale 'en_US.UTF-8' not available
Generating locales...
it_IT.UTF-8... done
en_US.UTF-8... done
Generation complete.
Reading package lists...
Building dependency tree...
Suggested packages:
grub-doc grubconf
The following NEW packages will be installed:
grub

Preconfiguring packages ...
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/356kB of archives.
After unpacking 762kB of additional disk space will be used.
Selecting previously deselected package grub.
(Reading database ... 12083 files and directories currently installed.)
Unpacking grub (from .../grub_0.95+cvs20040624-17ubuntu7_i386.deb) ...
Setting up grub (0.95+cvs20040624-17ubuntu7) ...
Probing devices to guess BIOS drives. This may take a long time.
Due to a bug in xfs_freeze, the following command might produce a segmentation
fault when /boot/grub is not in an XFS filesystem. This error is harmless and
can be ignored.
xfs_freeze: specified file ["/boot/grub"] is not on an XFS filesystem
Installation finished. No error reported.
This is the contents of the device map /boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.

(hd0) /dev/hda
(hd1) /dev/hdb
Searching for GRUB installation directory ... found: /boot/grub .
Testing for an existing GRUB menu.list file...

Could not find /boot/grub/menu.lst file. Would you like /boot/grub/menu.lst generated for you? (y/N) Searching for splash image... none found, skipping...
Found kernel: /boot/vmlinuz-2.6.12-9-386
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done

-----------------------------------------------------------------------------------

e anche il kern.log

Sep 14 22:36:10 localhost kernel: Inspecting /boot/System.map-2.6.12-9-386
Sep 14 22:36:10 localhost kernel: Loaded 29002 symbols from /boot/System.map-2.6.12-9-386.
Sep 14 22:36:10 localhost kernel: Symbols match kernel version 2.6.12.
Sep 14 22:36:10 localhost kernel: No module symbols loaded - kernel modules not enabled.
Sep 14 22:36:10 localhost kernel: .333000] Enabling fast FPU save and restore... done.
Sep 14 22:36:10 localhost kernel: [4294668.333000] Enabling unmasked SIMD FPU exception support... done.
Sep 14 22:36:10 localhost kernel: [4294668.333000] Checking 'hlt' instruction... OK.
Sep 14 22:36:10 localhost kernel: [4294668.337000] Checking for popad bug... OK.
Sep 14 22:36:10 localhost kernel: [4294668.337000] checking if image is initramfs... it is
Sep 14 22:36:10 localhost kernel: [4294668.756000] Freeing initrd memory: 4821k freed
Sep 14 22:36:10 localhost kernel: [4294668.756000] ACPI: Looking for DSDT in initrd... not found!
Sep 14 22:36:10 localhost kernel: [4294668.811000] not found!
Sep 14 22:36:10 localhost kernel: [4294668.819000] ENABLING IO-APIC IRQs
Sep 14 22:36:10 localhost kernel: [4294668.820000] ..TIMER: vector=0x31 pin1=2 pin2=-1
Sep 14 22:36:10 localhost kernel: [4294668.931000] NET: Registered protocol family 16
Sep 14 22:36:10 localhost kernel: [4294668.931000] EISA bus registered
Sep 14 22:36:10 localhost kernel: [4294668.931000] ACPI: bus type pci registered
Sep 14 22:36:10 localhost kernel: [4294668.931000] PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
Sep 14 22:36:10 localhost kernel: [4294668.931000] PCI: Using configuration type 1
Sep 14 22:36:10 localhost kernel: [4294668.931000] mtrr: v2.0 (20020519)
Sep 14 22:36:10 localhost kernel: [4294668.932000] ACPI: Subsystem revision 20050729
Sep 14 22:36:10 localhost kernel: [4294668.940000] ACPI: Interpreter enabled
Sep 14 22:36:10 localhost kernel: [4294668.940000] ACPI: Using IOAPIC for interrupt routing
Sep 14 22:36:10 localhost kernel: [4294668.940000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
Sep 14 22:36:10 localhost kernel: [4294668.940000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12)
Sep 14 22:36:10 localhost kernel: [4294668.941000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Sep 14 22:36:10 localhost kernel: [4294668.941000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12)
Sep 14 22:36:10 localhost kernel: [4294668.941000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12)
Sep 14 22:36:10 localhost kernel: [4294668.942000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
Sep 14 22:36:10 localhost kernel: [4294668.942000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Sep 14 22:36:10 localhost kernel: [4294668.942000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep 14 22:36:10 localhost kernel: [4294668.942000] PCI: Probing PCI hardware (bus 00)
Sep 14 22:36:10 localhost kernel: [4294668.942000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Sep 14 22:36:10 localhost kernel: [4294668.942000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Sep 14 22:36:10 localhost kernel: [4294668.946000] Boot video device is 0000:01:00.0
Sep 14 22:36:10 localhost kernel: [4294668.948000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep 14 22:36:10 localhost kernel: [4294668.948000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Sep 14 22:36:10 localhost kernel: [4294668.953000] Linux Plug and Play Support v0.97 (c) Adam Belay
Sep 14 22:36:10 localhost kernel: [4294668.953000] pnp: PnP ACPI init
Sep 14 22:36:10 localhost kernel: [4294668.957000] pnp: PnP ACPI: found 13 devices
Sep 14 22:36:10 localhost kernel: [4294668.957000] PnPBIOS: Disabled by ACPI PNP
Sep 14 22:36:10 localhost kernel: [4294668.957000] PCI: Using ACPI for IRQ routing
Sep 14 22:36:10 localhost kernel: [4294668.957000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Sep 14 22:36:10 localhost kernel: [4294668.963000] pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
Sep 14 22:36:10 localhost kernel: [4294668.963000] pnp: 00:01: ioport range 0xe800-0xe81f has been reserved
Sep 14 22:36:10 localhost kernel: [4294668.963000] pnp: 00:0c: ioport range 0x290-0x297 has been reserved
Sep 14 22:36:10 localhost kernel: [4294668.963000] pnp: 00:0c: ioport range 0x370-0x375 has been reserved
Sep 14 22:36:10 localhost kernel: [4294668.963000] Simple Boot Flag at 0x3a set to 0x1
Sep 14 22:36:10 localhost kernel: [4294668.963000] audit: initializing netlink socket (disabled)
Sep 14 22:36:10 localhost kernel: [4294668.963000] audit: initialized
Sep 14 22:36:10 localhost kernel: [4294668.964000] highmem bounce pool size: 64 pages
Sep 14 22:36:10 localhost kernel: [4294668.964000] VFS: Disk quotas dquot_6.5.1
Sep 14 22:36:10 localhost kernel: [4294668.964000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep 14 22:36:10 localhost kernel: [4294668.964000] devfs: 2004-01-31 Richard Gooch ([email protected])
Sep 14 22:36:10 localhost kernel: [4294668.964000] devfs: boot_options: 0x0
Sep 14 22:36:10 localhost kernel: [4294668.964000] Initializing Cryptographic API
Sep 14 22:36:10 localhost kernel: [4294668.964000] isapnp: Scanning for PnP cards...
Sep 14 22:36:10 localhost kernel: [4294669.317000] isapnp: No Plug & Play device found
Sep 14 22:36:10 localhost kernel: [4294669.336000] PNP: No PS/2 controller found. Probing ports directly.
Sep 14 22:36:10 localhost kernel: [4294669.340000] serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 14 22:36:10 localhost kernel: [4294669.341000] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 14 22:36:10 localhost kernel: [4294669.341000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Sep 14 22:36:10 localhost kernel: [4294669.341000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 14 22:36:10 localhost kernel: [4294669.343000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 14 22:36:10 localhost kernel: [4294669.343000] io scheduler noop registered
Sep 14 22:36:10 localhost kernel: [4294669.343000] io scheduler anticipatory registered
Sep 14 22:36:10 localhost kernel: [4294669.343000] io scheduler deadline registered
Sep 14 22:36:10 localhost kernel: [4294669.343000] io scheduler cfq registered
Sep 14 22:36:10 localhost kernel: [4294669.343000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Sep 14 22:36:10 localhost kernel: [4294669.344000] EISA: Probing bus 0 at eisa.0
Sep 14 22:36:10 localhost kernel: [4294669.344000] EISA: Detected 0 cards.
Sep 14 22:36:10 localhost kernel: [4294669.344000] NET: Registered protocol family 2
Sep 14 22:36:10 localhost kernel: [4294669.353000] IP: routing cache hash table of 8192 buckets, 64Kbytes
Sep 14 22:36:10 localhost kernel: [4294669.353000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
Sep 14 22:36:10 localhost kernel: [4294669.357000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Sep 14 22:36:10 localhost kernel: [4294669.357000] TCP: Hash tables configured (established 262144 bind 65536)
Sep 14 22:36:10 localhost kernel: [4294669.358000] NET: Registered protocol family 8
Sep 14 22:36:10 localhost kernel: [4294669.358000] NET: Registered protocol family 20
Sep 14 22:36:10 localhost kernel: [4294669.358000] ACPI wakeup devices:
Sep 14 22:36:10 localhost kernel: [4294669.358000] PCI0 PCI1 USB0 USB1 USB2 SU20 SLAN
Sep 14 22:36:10 localhost kernel: [4294669.358000] ACPI: (supports S0 S1 S4 S5)
Sep 14 22:36:10 localhost kernel: [4294669.358000] Freeing unused kernel memory: 224k freed
Sep 14 22:36:10 localhost kernel: [4294669.794000] input: AT Translated Set 2 keyboard on isa0060/serio0
Sep 14 22:36:10 localhost kernel: [4294669.800000] vga16fb: initializing
Sep 14 22:36:10 localhost kernel: [4294669.800000] vga16fb: mapped to 0xc00a0000
Sep 14 22:36:10 localhost kernel: [4294669.962000] Console: switching to colour frame buffer device 80x30
Sep 14 22:36:10 localhost kernel: [4294669.962000] fb0: VGA16 VGA frame buffer device
Sep 14 22:36:10 localhost kernel: [4294671.105000] Capability LSM initialized
Sep 14 22:36:10 localhost kernel: [4294671.118000] NET: Registered protocol family 1
Sep 14 22:36:10 localhost kernel: [4294671.134000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Sep 14 22:36:10 localhost kernel: [4294671.134000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep 14 22:36:10 localhost kernel: [4294671.134000] ACPI: bus type ide registered
Sep 14 22:36:10 localhost kernel: [4294671.139000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
Sep 14 22:36:10 localhost kernel: [4294671.139000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
Sep 14 22:36:10 localhost kernel: [4294671.139000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
Sep 14 22:36:10 localhost kernel: [4294671.139000] VP_IDE: chipset revision 6
Sep 14 22:36:10 localhost kernel: [4294671.139000] VP_IDE: not 100%% native mode: will probe irqs later
Sep 14 22:36:10 localhost kernel: [4294671.139000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Sep 14 22:36:10 localhost kernel: [4294671.139000] ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hdaMA, hdbMA
Sep 14 22:36:10 localhost kernel: [4294671.139000] ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdcMA, hddMA
Sep 14 22:36:10 localhost kernel: [4294671.139000] Probing IDE interface ide0...
Sep 14 22:36:10 localhost kernel: [4294671.523000] hda: Maxtor 6Y080L0, ATA DISK drive
Sep 14 22:36:10 localhost kernel: [4294671.778000] hdb: Maxtor 6Y060L0, ATA DISK drive
Sep 14 22:36:10 localhost kernel: [4294671.829000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Sep 14 22:36:10 localhost kernel: [4294671.829000] Probing IDE interface ide1...
Sep 14 22:36:10 localhost kernel: [4294672.621000] hdc: Pioneer DVD-ROM ATAPIModel DVD-116 0109, ATAPI CD/DVD-ROM drive
Sep 14 22:36:10 localhost kernel: [4294673.335000] hdd: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
Sep 14 22:36:10 localhost kernel: [4294673.386000] ide1 at 0x170-0x177,0x376 on irq 15
Sep 14 22:36:10 localhost kernel: [4294673.386000] Probing IDE interface ide2...
Sep 14 22:36:10 localhost kernel: [4294673.899000] Probing IDE interface ide3...
Sep 14 22:36:10 localhost kernel: [4294674.411000] Probing IDE interface ide4...
Sep 14 22:36:10 localhost kernel: [4294674.923000] Probing IDE interface ide5...
Sep 14 22:36:10 localhost kernel: [4294675.438000] hda: max request size: 128KiB
Sep 14 22:36:10 localhost kernel: [4294675.452000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
Sep 14 22:36:10 localhost kernel: [4294675.452000] hda: cache flushes supported
Sep 14 22:36:10 localhost kernel: [4294675.452000] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 >
Sep 14 22:36:10 localhost kernel: [4294675.488000] hdb: max request size: 128KiB
Sep 14 22:36:10 localhost kernel: [4294675.488000] hdb: 120103200 sectors (61492 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
Sep 14 22:36:10 localhost kernel: [4294675.489000] hdb: cache flushes supported
Sep 14 22:36:10 localhost kernel: [4294675.489000] /dev/ide/host0/bus0/target1/lun0: p1
Sep 14 22:36:10 localhost kernel: [4294675.496000] hdc: ATAPI 40X DVD-ROM drive, 256kB Cache
Sep 14 22:36:10 localhost kernel: [4294675.496000] Uniform CD-ROM driver Revision: 3.20
Sep 14 22:36:10 localhost kernel: [4294675.498000] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Sep 14 22:36:10 localhost kernel: [4294675.920000] Attempting manual resume
Sep 14 22:36:10 localhost kernel: [4294675.933000] swsusp: Suspend partition has wrong signature?
Sep 14 22:36:10 localhost kernel: [4294675.992000] usbcore: registered new driver usbfs
Sep 14 22:36:10 localhost kernel: [4294675.992000] usbcore: registered new driver hub
Sep 14 22:36:10 localhost kernel: [4294675.993000] USB Universal Host Controller Interface driver v2.2
Sep 14 22:36:10 localhost kernel: [4294675.993000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
Sep 14 22:36:10 localhost kernel: [4294675.993000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 5
Sep 14 22:36:10 localhost kernel: [4294675.993000] uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Sep 14 22:36:10 localhost kernel: [4294676.055000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Sep 14 22:36:10 localhost kernel: [4294676.055000] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800
Sep 14 22:36:10 localhost kernel: [4294676.055000] hub 1-0:1.0: USB hub found
Sep 14 22:36:10 localhost kernel: [4294676.055000] hub 1-0:1.0: 2 ports detected
Sep 14 22:36:10 localhost kernel: [4294676.058000] ACPI: PCI Interrupt 0000:00:10.1[b] -> GSI 21 (level, low) -> IRQ 21
Sep 14 22:36:10 localhost kernel: [4294676.058000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 5
Sep 14 22:36:10 localhost kernel: [4294676.058000] uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Sep 14 22:36:10 localhost kernel: [4294676.120000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Sep 14 22:36:10 localhost kernel: [4294676.120000] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400
Sep 14 22:36:10 localhost kernel: [4294676.120000] hub 2-0:1.0: USB hub found
Sep 14 22:36:10 localhost kernel: [4294676.120000] hub 2-0:1.0: 2 ports detected
Sep 14 22:36:10 localhost kernel: [4294676.123000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
Sep 14 22:36:10 localhost kernel: [4294676.123000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 5
Sep 14 22:36:10 localhost kernel: [4294676.123000] uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
Sep 14 22:36:10 localhost kernel: [4294676.185000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Sep 14 22:36:10 localhost kernel: [4294676.185000] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000
Sep 14 22:36:10 localhost kernel: [4294676.185000] hub 3-0:1.0: USB hub found
Sep 14 22:36:10 localhost kernel: [4294676.185000] hub 3-0:1.0: 2 ports detected
Sep 14 22:36:10 localhost kernel: [4294676.213000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
Sep 14 22:36:10 localhost kernel: [4294676.213000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 5
Sep 14 22:36:10 localhost kernel: [4294676.213000] ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
Sep 14 22:36:10 localhost kernel: [4294676.213000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Sep 14 22:36:10 localhost kernel: [4294676.213000] ehci_hcd 0000:00:10.3: irq 21, io mem 0xea800000
Sep 14 22:36:10 localhost kernel: [4294676.213000] ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Sep 14 22:36:10 localhost kernel: [4294676.213000] hub 4-0:1.0: USB hub found
Sep 14 22:36:10 localhost kernel: [4294676.213000] hub 4-0:1.0: 6 ports detected
Sep 14 22:36:10 localhost kernel: [4294676.224000] usb 1-1: new full speed USB device using uhci_hcd and address 2
Sep 14 22:36:10 localhost kernel: [4294676.269000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
Sep 14 22:36:10 localhost kernel: [4294676.269000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
Sep 14 22:36:10 localhost kernel: [4294676.269000] PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 7
Sep 14 22:36:10 localhost kernel: [4294676.269000] eth0: VIA Rhine II at 0x1b400, 00:11:d8:07:2f:55, IRQ 23.
Sep 14 22:36:10 localhost kernel: [4294676.270000] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
Sep 14 22:36:10 localhost kernel: [4294676.972000] usb 4-1: new high speed USB device using ehci_hcd and address 2
Sep 14 22:36:10 localhost kernel: [4294677.838000] usb 1-2: new low speed USB device using uhci_hcd and address 3
Sep 14 22:36:10 localhost kernel: [4294678.207000] usb 2-1: new low speed USB device using uhci_hcd and address 2
Sep 14 22:36:10 localhost kernel: [4294678.515000] usb 2-2: new low speed USB device using uhci_hcd and address 3
Sep 14 22:36:10 localhost kernel: [4294678.630000] usbcore: registered new driver hiddev
Sep 14 22:36:10 localhost kernel: [4294678.683000] input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:10.0-2
Sep 14 22:36:10 localhost kernel: [4294678.763000] input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:10.0-2
Sep 14 22:36:10 localhost kernel: [4294678.788000] input: USB HID v1.10 Keyboard [Twinhan Tech Remote Control] on usb-0000:00:10.1-1
Sep 14 22:36:10 localhost kernel: [4294678.813000] input: USB HID v1.10 Mouse [Twinhan Tech Remote Control] on usb-0000:00:10.1-1
Sep 14 22:36:10 localhost kernel: [4294678.830000] input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:10.1-2
Sep 14 22:36:10 localhost kernel: [4294678.830000] usbcore: registered new driver usbhid
Sep 14 22:36:10 localhost kernel: [4294678.830000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Sep 14 22:36:10 localhost kernel: [4294679.398000] ACPI: CPU0 (power states: C1[C1])
Sep 14 22:36:10 localhost kernel: [4294679.612000] Attempting manual resume
Sep 14 22:36:10 localhost kernel: [4294679.612000] swsusp: Suspend partition has wrong signature?
Sep 14 22:36:10 localhost kernel: [4294680.618000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Sep 14 22:36:10 localhost kernel: [4294683.424000] Adding 1052216k swap on /dev/hda5. Priority:-1 extents:1
Sep 14 22:36:10 localhost kernel: [4294688.495000] parport: PnPBIOS parport detected.
Sep 14 22:36:10 localhost kernel: [4294688.495000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Sep 14 22:36:10 localhost kernel: [4294688.584000] lp0: using parport0 (interrupt-driven).
Sep 14 22:36:10 localhost kernel: [4294688.708000] mice: PS/2 mouse device common for all mice
Sep 14 22:36:10 localhost kernel: [4294692.383000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
Sep 14 22:36:10 localhost kernel: [4294694.603000] NTFS driver 2.1.22 [Flags: R/O MODULE].
Sep 14 22:36:10 localhost kernel: [4294694.663000] NTFS volume version 3.1.
Sep 14 22:36:10 localhost kernel: [4294694.698000] ReiserFS: hda6: found reiserfs format "3.6" with standard journal
Sep 14 22:36:10 localhost kernel: [4294695.217000] ReiserFS: hda6: using ordered data mode
Sep 14 22:36:10 localhost kernel: [4294695.229000] ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Sep 14 22:36:10 localhost kernel: [4294695.231000] ReiserFS: hda6: checking transaction log (hda6)
Sep 14 22:36:10 localhost kernel: [4294695.268000] ReiserFS: hda6: Using r5 hash to sort names
Sep 14 22:36:10 localhost kernel: [4294695.342000] NTFS volume version 3.1.
Sep 14 22:36:10 localhost kernel: [4294695.996000] Linux agpgart interface v0.101 (c) Dave Jones
Sep 14 22:36:10 localhost kernel: [4294696.007000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
Sep 14 22:36:10 localhost kernel: [4294696.030000] agpgart: AGP aperture is 64M @ 0xf8000000
Sep 14 22:36:10 localhost kernel: [4294696.124000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 14 22:36:10 localhost kernel: [4294696.131000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
Sep 14 22:36:10 localhost kernel: [4294696.131000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Sep 14 22:36:10 localhost kernel: [4294696.243000] Linux video capture interface: v1.00
Sep 14 22:36:10 localhost kernel: [4294696.299000] bttv: driver version 0.9.15 loaded
Sep 14 22:36:10 localhost kernel: [4294696.299000] bttv: using 8 buffers with 2080k (520 pages) each for capture
Sep 14 22:36:10 localhost kernel: [4294696.304000] bttv: Bt8xx card found (0).
Sep 14 22:36:10 localhost kernel: [4294696.304000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
Sep 14 22:36:10 localhost kernel: [4294696.304000] bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 19, latency: 32, mmio: 0xef000000
Sep 14 22:36:10 localhost kernel: [4294696.304000] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
Sep 14 22:36:10 localhost kernel: [4294696.304000] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
Sep 14 22:36:10 localhost kernel: [4294696.319000] tveeprom(bttv internal): Huh, no eeprom present (err=-121)?
Sep 14 22:36:10 localhost kernel: [4294696.319000] bttv0: using tuner=-1
Sep 14 22:36:10 localhost kernel: [4294696.319000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
Sep 14 22:36:10 localhost kernel: [4294696.321000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Sep 14 22:36:10 localhost kernel: [4294696.323000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Sep 14 22:36:10 localhost kernel: [4294696.326000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
Sep 14 22:36:10 localhost kernel: [4294696.338000] bttv0: registered device video0
Sep 14 22:36:10 localhost kernel: [4294696.345000] bttv0: registered device vbi0
Sep 14 22:36:10 localhost kernel: [4294696.345000] bttv: Bt8xx card found (1).
Sep 14 22:36:10 localhost kernel: [4294696.345000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 17
Sep 14 22:36:10 localhost kernel: [4294696.345000] bttv1: Bt878 (rev 17) at 0000:00:0e.0, irq: 17, latency: 32, mmio: 0xee000000
Sep 14 22:36:10 localhost kernel: [4294696.345000] bttv1: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
Sep 14 22:36:10 localhost kernel: [4294696.345000] bttv1: using: Twinhan DST + clones [card=113,autodetected]
Sep 14 22:36:10 localhost kernel: [4294696.345000] bttv1: gpio: en=00000000, out=00000000 in=00f100fe [init]
Sep 14 22:36:10 localhost kernel: [4294696.350000] bttv1: using tuner=4
Sep 14 22:36:10 localhost kernel: [4294696.363000] tuner 0-004b: chip found @ 0x96 (bt878 #0 [sw])
Sep 14 22:36:10 localhost kernel: [4294696.368000] bttv1: add subdevice "dvb1"
Sep 14 22:36:10 localhost kernel: [4294696.569000] bt878: AUDIO driver version 0.0.0 loaded
Sep 14 22:36:10 localhost kernel: [4294696.574000] bt878: Bt878 AUDIO function found (0).
Sep 14 22:36:10 localhost kernel: [4294696.574000] ACPI: PCI Interrupt 0000:00:0b.1[A] -> GSI 19 (level, low) -> IRQ 19
Sep 14 22:36:10 localhost kernel: [4294696.574000] bt878(0): Bt878 (rev 17) at 00:0b.1, irq: 19, latency: 32, memory: 0xee800000
Sep 14 22:36:10 localhost kernel: [4294696.574000] bt878: Bt878 AUDIO function found (1).
Sep 14 22:36:10 localhost kernel: [4294696.574000] ACPI: PCI Interrupt 0000:00:0e.1[A] -> GSI 17 (level, low) -> IRQ 17
Sep 14 22:36:10 localhost kernel: [4294696.574000] bt878(1): Bt878 (rev 17) at 00:0e.1, irq: 17, latency: 32, memory: 0xed800000
Sep 14 22:36:10 localhost kernel: [4294697.040000] irda_init()
Sep 14 22:36:10 localhost kernel: [4294697.040000] NET: Registered protocol family 23
Sep 14 22:36:10 localhost kernel: [4294697.426000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
Sep 14 22:36:10 localhost kernel: [4294697.426000] PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 6
Sep 14 22:36:10 localhost kernel: [4294697.428000] PCI: Setting latency timer of device 0000:00:11.5 to 64
Sep 14 22:36:10 localhost kernel: [4294697.938000] codec_read: codec 0 is not valid [0x107e5370]
Sep 14 22:36:10 localhost kernel: [4294697.944000] codec_read: codec 0 is not valid [0x107e5370]
Sep 14 22:36:10 localhost kernel: [4294697.951000] codec_read: codec 0 is not valid [0x107e5370]
Sep 14 22:36:10 localhost kernel: [4294697.957000] codec_read: codec 0 is not valid [0x107e5370]
Sep 14 22:36:10 localhost kernel: [4294700.678000] Real Time Clock Driver v1.12
Sep 14 22:36:10 localhost kernel: [4294700.729000] input: PC Speaker
Sep 14 22:36:10 localhost kernel: [4294700.914000] Floppy drive(s): fd0 is 1.44M
Sep 14 22:36:10 localhost kernel: [4294700.929000] FDC 0 is a post-1991 82077
Sep 14 22:36:10 localhost kernel: [4294701.456000] ts: Compaq touchscreen protocol output
Sep 14 22:36:10 localhost kernel: [4294704.130000] ACPI: Power Button (FF) [PWRF]
Sep 14 22:36:10 localhost kernel: [4294704.130000] ACPI: Power Button (CM) [PWRB]
Sep 14 22:36:10 localhost kernel: [4294704.252000] ibm_acpi: ec object not found
Sep 14 22:39:24 localhost kernel: [4294899.006000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Sep 14 22:39:24 localhost kernel: [4294899.006000] apm: overridden by ACPI.
Sep 14 22:39:24 localhost kernel: [4294899.026000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Sep 14 22:39:24 localhost kernel: [4294899.026000] apm: disabled on user request.
Sep 14 22:39:42 localhost kernel: [4294916.675000] Bluetooth: Core ver 2.7
Sep 14 22:39:42 localhost kernel: [4294916.675000] NET: Registered protocol family 31
Sep 14 22:39:42 localhost kernel: [4294916.675000] Bluetooth: HCI device and connection manager initialized
Sep 14 22:39:42 localhost kernel: [4294916.675000] Bluetooth: HCI socket layer initialized
Sep 14 22:39:42 localhost kernel: [4294916.696000] Bluetooth: L2CAP ver 2.7
Sep 14 22:39:42 localhost kernel: [4294916.696000] Bluetooth: L2CAP socket layer initialized
Sep 14 22:39:42 localhost kernel: [4294916.722000] Bluetooth: RFCOMM ver 1.5
Sep 14 22:39:42 localhost kernel: [4294916.722000] Bluetooth: RFCOMM socket layer initialized
Sep 14 22:39:42 localhost kernel: [4294916.722000] Bluetooth: RFCOMM TTY layer initialized
Sep 14 22:41:26 localhost kernel: [4295021.175000] ibm_acpi: ec object not found
Sep 14 22:42:28 localhost kernel: [4295083.202000] NET: Registered protocol family 10
Sep 14 22:42:28 localhost kernel: [4295083.202000] Disabled Privacy Extensions on device c02eb280(lo)
Sep 14 22:42:28 localhost kernel: [4295083.202000] IPv6 over IPv4 tunneling driver
Sep 14 22:44:20 localhost kernel: [4295194.651000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Sep 14 22:44:20 localhost kernel: [4295194.651000] apm: disabled on user request.
Sep 14 22:44:59 localhost kernel: [4295234.290000] ppdev: user-space parallel port driver
Sep 14 22:44:59 localhost kernel: [4295234.314000] ppdev0: registered pardevice
Sep 14 22:45:00 localhost kernel: [4295234.361000] ppdev0: unregistered pardevice
Sep 14 22:45:00 localhost kernel: [4295234.361000] ppdev1: claim the port first
Sep 14 22:45:00 localhost kernel: [4295234.361000] ppdev2: claim the port first

[LaToX]

e quà il syslog :

Sep 14 22:44:34 localhost syslogd 1.4.1#17ubuntu3: restart.
Sep 14 22:44:34 localhost anacron[19349]: Job `cron.daily' terminated (mailing output)
Sep 14 22:44:34 localhost anacron[19349]: Can't find sendmail at /usr/sbin/sendmail, not mailing output
Sep 14 22:44:59 localhost kernel: [4295234.290000] ppdev: user-space parallel port driver
Sep 14 22:44:59 localhost kernel: [4295234.314000] ppdev0: registered pardevice
Sep 14 22:45:00 localhost hpiod: ParDevice::nibble_read failed: Input/output error
Sep 14 22:45:00 localhost kernel: [4295234.361000] ppdev0: unregistered pardevice
Sep 14 22:45:00 localhost kernel: [4295234.361000] ppdev1: claim the port first
Sep 14 22:45:00 localhost kernel: [4295234.361000] ppdev2: claim the port first
Sep 14 22:45:00 localhost hpiod: unable to ParDevice:pen hp:/par/ANY?device=/dev/parport3: No such file or directory: io/hpiod/ppdevice.cpp 827
Sep 14 22:45:53 localhost gconfd (root-28199): starting (version 2.12.0), pid 28199 user 'root'
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Sep 14 22:45:53 localhost gconfd (root-28199): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Sep 14 22:46:23 localhost gconfd (root-28199): GConf server is not in use, shutting down.
Sep 14 22:46:23 localhost gconfd (root-28199): Exiting

[CARVASIN]

dopo aver ricompilato il kernel (si, quella famosa volta...) mi sono accorto che i i driver ati, almeno in quanto ad accelerazione, non svolgono più il loro lavoro...
ho cosi ri-seguito QUESTA guida (la utilizzai a suo tempo e funzionò alla grande). ecco cosa mi restituisce il primo comando dopo aver installato (o meglio reinstallato) i pacchetti da synaptic:

:~$ sudo modprobe fglrx
FATAL: Module fglrx not found.

non mi trova il modulo...è "colpa" della ricompilazione?!
ho anche provato a seguire i comandi per installarlo attraverso il .run del sito dell'ati (la procedura sta nella stessa pagina, solo un po più sopra)

:~$ chmod +x ati-driver-installer-8.21.7-i386.run
:~$

e non accade nulla...

PS: nel file /etc/modules è presente la voce fglrx


ciao

edit: o che sia colpa di initNG...

[Duff79]

Uhm, spero di poter chiedere qui. Da vero niubbo un mese fa ho istallato la ubuntu sul PC in cui uso anche Windows e adesso non mi ricordo più ne nome utente ne pwd

Ok, sono un coglione


Come posso risolvere?

[CARVASIN]

...prova a dare un'occhiata QUI

ciao

[CARVASIN]

per quanto riguarda i drivers....
ho fatto partire l'installer. quando mi apre la scheramata per la selezione della distribuzione di cui voglio il pacchetto...la schermata e gigantesca e non riesco a visualizzarla tutta, non so come andare avanti

[Cobra78]

CARVASIN fai come ho fatto io: assegni il trascinamento finestra ad un tasto che vuoi nelle opzioni da tastiera, così tenendolo premuto puoi spostare la finestra dei Driver (ma perchè diamine l'han fatta di 2 km???) e visualizzare anche il resto