Torna indietro   Hardware Upgrade Forum > Software > Linux, Unix, OS alternativi

Canon svela EOS R5 e R6, due nuove mirrorless 35mm avanzate e performanti
Canon svela EOS R5 e R6, due nuove mirrorless 35mm avanzate e performanti
La EOS R5 è una "big megapixel" ad alte performance, che si pone in concorrenza con Sony A7R e Nikon D850 - in casa Canon, può essere considerata la versione mirrorless della 5Ds. La EOS R6, dal canto suo, può essere considerata l'erede spirituale della 7D Mark II, con assonanze che arrivano a scomodare nientemeno che la EOS-1D X Mark III.
Aorus 17G XB, l'approccio di Gigabyte al mondo dei notebook gaming
Aorus 17G XB, l'approccio di Gigabyte al mondo dei notebook gaming
Abbiamo avuto l'opportunità di provare l'Aorus 17G XB di Gigabyte, un prodotto che non arriverà in Italia ma che incarna l'approccio dell'azienda taiwanese al settore dei portatili da gioco. Si tratta di un notebook interessante, forte di una CPU Core i7-10875H, una GPU RTX 2070 Super Max-Q e 16 GB di RAM. Non esente da pecche, è comunque un prodotto indubbiamente in grado di soddisfare il gamer più esigente.
Ryzen 9 3900XT, Ryzen 7 3800XT e Ryzen 5 3600XT: aspettando Zen 3
Ryzen 9 3900XT, Ryzen 7 3800XT e Ryzen 5 3600XT: aspettando Zen 3
A un anno esatto dal debutto dei Ryzen 3000, AMD rinnova la gamma con i modelli Ryzen 9 3900XT, Ryzen 7 3800XT e Ryzen 5 3600XT. Si tratta di CPU basate sulle stesse fondamenta dei Ryzen 3000, con 100 o 200 MHz in più di clock di boost. In questo modo aumentano, leggermente, le prestazioni con i carichi single-thread. Si tratta di una novità che non sconvolge il mercato e che fa da preambolo all'arrivo dei Ryzen 4000 nell'ultima parte dell'anno.
Tutti gli articoli Tutte le news

Vai al Forum
Rispondi
 
Strumenti
Old 23-05-2020, 05:25   #1
Sterlok
Member
 
L'Avatar di Sterlok
 
Iscritto dal: Oct 2019
Messaggi: 62
Errore di stampa CUPS su HP-P1005

Ciao a tutti

Premetto che ci vuole un pò di pazienza, spero capirete..... comuqnue

Il problema nasce quando ho deciso di mettere in rete LAN interna, una vecchiotta stampante solo USB, la HP P1005, macchina da guerra! Davvero indistruttibile..... Mi sono amato di raspberrey PI3 con l'accoppiata Ubuntu-server, sistema solamente da riga di comando.

Partiamo con installare i drier sul sitema Ubuntu...

Codice:
sudo -s

apt get update

apt install hplip

apt install cups
Dopodichè entrato nel menu di CUPS, datole i premessi di utente "ubuntu",
inizio la configurazione della stampante USB, metto il driver PPD, scaricato dal sito dei driver linux per HPP1005.... infine... mando in stampa la pagina di prova, e non c'è verso che funzioni... vi lascio all'errore presente e alle vostre riflessioni, ciao e grazie a tutti....

Sterlok è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 07:27   #2
Nicodemo Timoteo Taddeo
Senior Member
 
L'Avatar di Nicodemo Timoteo Taddeo
 
Iscritto dal: Mar 2008
Messaggi: 12000
Filter failed è un errore generico, in

var/log/cups/error_log

dovresti trovare altre informazioni.
Nicodemo Timoteo Taddeo è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 08:51   #3
Sterlok
Member
 
L'Avatar di Sterlok
 
Iscritto dal: Oct 2019
Messaggi: 62
grazie dell'aiuto...

Andimo per gradi, adesso la stampante ho provato a collegarla ad un PC Windows 10 e non viene più rilevata.... forse ho fatto qualche danno...
cosa potrei fare?
In gestione dispositivi non 'è nenache più presente...

Provo a postarti il log....asp


Codice:
I [23/May/2020:07:57:01 +0000] Saving subscriptions.conf...
D [23/May/2020:07:57:02 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [23/May/2020:07:57:02 +0000] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
I [23/May/2020:07:57:02 +0000] Saving job.cache...
D [23/May/2020:07:57:04 +0000] cupsdStopSelect()
I [23/May/2020:07:57:04 +0000] Listening to 0.0.0.0:631 (IPv4)
I [23/May/2020:07:57:04 +0000] Listening to [v1.::]:631 (IPv6)
I [23/May/2020:07:57:04 +0000] Listening to /run/cups/cups.sock (Domain)
I [23/May/2020:07:57:04 +0000] Remote access is enabled.
D [23/May/2020:07:57:04 +0000] Added auto ServerAlias ubuntu
I [23/May/2020:07:57:04 +0000] Loaded configuration file "/etc/cups/cupsd.conf"
D [23/May/2020:07:57:04 +0000] Using keychain "/etc/cups/ssl" for server name "ubuntu".
I [23/May/2020:07:57:04 +0000] Using default TempDir of /var/spool/cups/tmp...
I [23/May/2020:07:57:04 +0000] Configured for up to 100 clients.
I [23/May/2020:07:57:04 +0000] Allowing up to 100 client connections per host.
I [23/May/2020:07:57:04 +0000] Using policy "default" as the default.
I [23/May/2020:07:57:04 +0000] Full reload is required.
I [23/May/2020:07:57:04 +0000] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 78 types, 118 filters...
D [23/May/2020:07:57:04 +0000] Loading printer HP_LaserJet_P1005...
D [23/May/2020:07:57:04 +0000] load_ppd: Loading /var/cache/cups/HP_LaserJet_P1005.data...
D [23/May/2020:07:57:04 +0000] cupsdRegisterPrinter(p=0xaaab1c0d9380(HP_LaserJet_P1005))
I [23/May/2020:07:57:04 +0000] Loading job cache file "/var/cache/cups/job.cache"...
I [23/May/2020:07:57:04 +0000] Full reload complete.
D [23/May/2020:07:57:04 +0000] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [23/May/2020:07:57:04 +0000] Cleaning out old files in "/var/spool/cups/tmp".
D [23/May/2020:07:57:04 +0000] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [23/May/2020:07:57:04 +0000] Cleaning out old files in "/var/cache/cups".
D [23/May/2020:07:57:04 +0000] service_checkin: pid=1677
D [23/May/2020:07:57:04 +0000] service_checkin: 1 listeners.
D [23/May/2020:07:57:04 +0000] service_add_listener: Listener #1 at fd 3, "/run/cups/cups.sock".
D [23/May/2020:07:57:04 +0000] service_add_listener: Matched existing listener #1 to /run/cups/cups.sock.
D [23/May/2020:07:57:04 +0000] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
D [23/May/2020:07:57:04 +0000] Calling FindDeviceById(cups-HP_LaserJet_P1005)
D [23/May/2020:07:57:04 +0000] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-HP_LaserJet_P1005\' does not exist
D [23/May/2020:07:57:04 +0000] Using profile ID "HP_LaserJet_P1005-Gray..".
D [23/May/2020:07:57:04 +0000] Calling CreateProfile(HP_LaserJet_P1005-Gray..,temp)
D [23/May/2020:07:57:04 +0000] Created profile "/org/freedesktop/ColorManager/profiles/HP_LaserJet_P1005_Gray__".
D [23/May/2020:07:57:04 +0000] Using profile ID "HP_LaserJet_P1005-RGB..".
D [23/May/2020:07:57:04 +0000] Calling CreateProfile(HP_LaserJet_P1005-RGB..,temp)
D [23/May/2020:07:57:04 +0000] Created profile "/org/freedesktop/ColorManager/profiles/HP_LaserJet_P1005_RGB__".
I [23/May/2020:07:57:04 +0000] Registering ICC color profiles for "HP_LaserJet_P1005".
D [23/May/2020:07:57:04 +0000] Calling CreateDevice(cups-HP_LaserJet_P1005,temp)
D [23/May/2020:07:57:04 +0000] Created device "/org/freedesktop/ColorManager/devices/cups_HP_LaserJet_P1005".
D [23/May/2020:07:57:04 +0000] Calling /org/freedesktop/ColorManager/devices/cups_HP_LaserJet_P1005:AddProfile(/org/freedesktop/ColorManager/profiles/HP_LaserJet_P1005_Gray__) [soft]
D [23/May/2020:07:57:04 +0000] Calling /org/freedesktop/ColorManager/devices/cups_HP_LaserJet_P1005:AddProfile(/org/freedesktop/ColorManager/profiles/HP_LaserJet_P1005_RGB__) [soft]
I [23/May/2020:07:57:04 +0000] Listening to 0.0.0.0:631 on fd 7...
I [23/May/2020:07:57:04 +0000] Listening to [v1.::]:631 on fd 8...
I [23/May/2020:07:57:04 +0000] Listening to /run/cups/cups.sock on fd 3...
I [23/May/2020:07:57:04 +0000] Resuming new connection processing...
D [23/May/2020:07:57:04 +0000] Avahi server connection now available, registering printers for Bonjour broadcasting.
I [23/May/2020:07:57:04 +0000] Defaulting to "DNSSDHostName ubuntu.local".
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [23/May/2020:07:57:04 +0000] cupsdAddCert: Adding certificate for PID 0
D [23/May/2020:07:57:04 +0000] Discarding unused server-started event...
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [23/May/2020:07:57:04 +0000] [Client 1] Server address is "/run/cups/cups.sock".
D [23/May/2020:07:57:04 +0000] [Client 1] Accepted from localhost (Domain)
D [23/May/2020:07:57:04 +0000] [Client 1] Waiting for request.
D [23/May/2020:07:57:04 +0000] Report: clients=1
D [23/May/2020:07:57:04 +0000] Report: jobs=0
D [23/May/2020:07:57:04 +0000] Report: jobs-active=0
D [23/May/2020:07:57:04 +0000] Report: printers=1
D [23/May/2020:07:57:04 +0000] Report: stringpool-string-count=730
D [23/May/2020:07:57:04 +0000] Report: stringpool-alloc-bytes=9136
D [23/May/2020:07:57:04 +0000] Report: stringpool-total-bytes=13928
D [23/May/2020:07:57:04 +0000] [Client 1] POST / HTTP/1.1
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=200, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] No authentication data provided.
D [23/May/2020:07:57:04 +0000] [Client 1] 2.0 Create-Printer-Subscriptions 1
D [23/May/2020:07:57:04 +0000] Create-Printer-Subscriptions /
D [23/May/2020:07:57:04 +0000] create_subscriptions(con=0xaaab1c10da90(1), uri="/")
D [23/May/2020:07:57:04 +0000] pullmethod="ippget"
D [23/May/2020:07:57:04 +0000] notify-lease-duration=86400
D [23/May/2020:07:57:04 +0000] notify-time-interval=60
D [23/May/2020:07:57:04 +0000] cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
D [23/May/2020:07:57:04 +0000] Added subscription #23 for server.
D [23/May/2020:07:57:04 +0000] cupsdMarkDirty(----S)
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [23/May/2020:07:57:04 +0000] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [23/May/2020:07:57:04 +0000] [Client 1] Content-Length: 104
D [23/May/2020:07:57:04 +0000] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/May/2020:07:57:04 +0000] [Client 1] con->http=0xaaab1c115820
D [23/May/2020:07:57:04 +0000] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=104, response=0xaaab1c1123a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [23/May/2020:07:57:04 +0000] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/May/2020:07:57:04 +0000] [Client 1] bytes=0, http_state=0, data_remaining=104
D [23/May/2020:07:57:04 +0000] [Client 1] Flushing write buffer.
D [23/May/2020:07:57:04 +0000] [Client 1] New state is HTTP_STATE_WAITING
D [23/May/2020:07:57:04 +0000] [Client 1] Waiting for request.
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [23/May/2020:07:57:04 +0000] [Client 2] Server address is "/run/cups/cups.sock".
D [23/May/2020:07:57:04 +0000] [Client 2] Accepted from localhost (Domain)
D [23/May/2020:07:57:04 +0000] [Client 2] Waiting for request.
D [23/May/2020:07:57:04 +0000] [Client 2] POST / HTTP/1.1
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [23/May/2020:07:57:04 +0000] [Client 2] Read: status=200, state=6
D [23/May/2020:07:57:04 +0000] [Client 2] No authentication data provided.
D [23/May/2020:07:57:04 +0000] [Client 2] 2.0 CUPS-Get-Default 2
D [23/May/2020:07:57:04 +0000] CUPS-Get-Default
D [23/May/2020:07:57:04 +0000] CUPS-Get-Default client-error-not-found: No default printer.
D [23/May/2020:07:57:04 +0000] [Client 2] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [23/May/2020:07:57:04 +0000] [Client 2] Content-Length: 110
D [23/May/2020:07:57:04 +0000] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/May/2020:07:57:04 +0000] [Client 2] con->http=0xaaab1c11c140
D [23/May/2020:07:57:04 +0000] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=110, response=0xaaab1c111e20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [23/May/2020:07:57:04 +0000] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/May/2020:07:57:04 +0000] [Client 2] bytes=0, http_state=0, data_remaining=110
D [23/May/2020:07:57:04 +0000] [Client 2] Flushing write buffer.
D [23/May/2020:07:57:04 +0000] [Client 2] New state is HTTP_STATE_WAITING
D [23/May/2020:07:57:04 +0000] [Client 2] Waiting for request.
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [23/May/2020:07:57:04 +0000] [Client 2] POST / HTTP/1.1
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [23/May/2020:07:57:04 +0000] [Client 2] Read: status=200, state=6
D [23/May/2020:07:57:04 +0000] [Client 2] No authentication data provided.
D [23/May/2020:07:57:04 +0000] [Client 2] 2.0 CUPS-Get-Printers 3
D [23/May/2020:07:57:04 +0000] CUPS-Get-Printers
D [23/May/2020:07:57:04 +0000] [Client 2] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [23/May/2020:07:57:04 +0000] [Client 2] Content-Length: 1241
D [23/May/2020:07:57:04 +0000] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/May/2020:07:57:04 +0000] [Client 2] con->http=0xaaab1c11c140
D [23/May/2020:07:57:04 +0000] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1241, response=0xaaab1c120080(IPP_STATE_DATA), pipe_pid=0, file=-1
D [23/May/2020:07:57:04 +0000] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/May/2020:07:57:04 +0000] [Client 2] bytes=0, http_state=0, data_remaining=1241
D [23/May/2020:07:57:04 +0000] [Client 2] Flushing write buffer.
D [23/May/2020:07:57:04 +0000] [Client 2] New state is HTTP_STATE_WAITING
D [23/May/2020:07:57:04 +0000] [Client 2] Waiting for request.
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [23/May/2020:07:57:04 +0000] [Client 1] POST /printers/HP_LaserJet_P1005 HTTP/1.1
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=200, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] No authentication data provided.
D [23/May/2020:07:57:04 +0000] [Client 1] 2.0 Get-Printer-Attributes 4
D [23/May/2020:07:57:04 +0000] Get-Printer-Attributes ipp://localhost/printers/HP_LaserJet_P1005
D [23/May/2020:07:57:04 +0000] [Client 1] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/HP_LaserJet_P1005) from localhost.
D [23/May/2020:07:57:04 +0000] [Client 1] Content-Length: 135
D [23/May/2020:07:57:04 +0000] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/May/2020:07:57:04 +0000] [Client 1] con->http=0xaaab1c115820
D [23/May/2020:07:57:04 +0000] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=135, response=0xaaab1c11ff70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [23/May/2020:07:57:04 +0000] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/May/2020:07:57:04 +0000] [Client 1] bytes=0, http_state=0, data_remaining=135
D [23/May/2020:07:57:04 +0000] [Client 1] Flushing write buffer.
D [23/May/2020:07:57:04 +0000] [Client 1] New state is HTTP_STATE_WAITING
D [23/May/2020:07:57:04 +0000] [Client 1] Waiting for request.
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [23/May/2020:07:57:04 +0000] [Client 1] POST / HTTP/1.1
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=200, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] No authentication data provided.
D [23/May/2020:07:57:04 +0000] [Client 1] 2.0 CUPS-Get-Default 5
D [23/May/2020:07:57:04 +0000] CUPS-Get-Default
D [23/May/2020:07:57:04 +0000] CUPS-Get-Default client-error-not-found: No default printer.
D [23/May/2020:07:57:04 +0000] [Client 1] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [23/May/2020:07:57:04 +0000] [Client 1] Content-Length: 110
D [23/May/2020:07:57:04 +0000] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/May/2020:07:57:04 +0000] [Client 1] con->http=0xaaab1c115820
D [23/May/2020:07:57:04 +0000] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=110, response=0xaaab1c120020(IPP_STATE_DATA), pipe_pid=0, file=-1
D [23/May/2020:07:57:04 +0000] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/May/2020:07:57:04 +0000] [Client 1] bytes=0, http_state=0, data_remaining=110
D [23/May/2020:07:57:04 +0000] [Client 1] Flushing write buffer.
D [23/May/2020:07:57:04 +0000] [Client 1] New state is HTTP_STATE_WAITING
D [23/May/2020:07:57:04 +0000] [Client 1] Waiting for request.
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [23/May/2020:07:57:04 +0000] [Client 1] POST / HTTP/1.1
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=200, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] No authentication data provided.
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=100, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=100, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=100, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=100, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=100, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=100, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=100, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] Read: status=100, state=6
D [23/May/2020:07:57:04 +0000] [Client 1] 2.0 Create-Printer-Subscriptions 6
D [23/May/2020:07:57:04 +0000] Create-Printer-Subscriptions /
D [23/May/2020:07:57:04 +0000] create_subscriptions(con=0xaaab1c10da90(1), uri="/")
D [23/May/2020:07:57:04 +0000] recipient="dbus://"
D [23/May/2020:07:57:04 +0000] notify-lease-duration=86400
D [23/May/2020:07:57:04 +0000] notify-time-interval=0
D [23/May/2020:07:57:04 +0000] cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [23/May/2020:07:57:04 +0000] Added subscription #24 for server.
D [23/May/2020:07:57:04 +0000] cupsdMarkDirty(----S)
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [23/May/2020:07:57:04 +0000] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [23/May/2020:07:57:04 +0000] [Client 1] Content-Length: 104
D [23/May/2020:07:57:04 +0000] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/May/2020:07:57:04 +0000] [Client 1] con->http=0xaaab1c115820
D [23/May/2020:07:57:04 +0000] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=104, response=0xaaab1c120110(IPP_STATE_DATA), pipe_pid=0, file=-1
D [23/May/2020:07:57:04 +0000] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/May/2020:07:57:04 +0000] [Client 1] bytes=0, http_state=0, data_remaining=104
D [23/May/2020:07:57:04 +0000] [Client 1] Flushing write buffer.
D [23/May/2020:07:57:04 +0000] [Client 1] New state is HTTP_STATE_WAITING
D [23/May/2020:07:57:04 +0000] [Client 1] Waiting for request.
D [23/May/2020:07:57:04 +0000] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [23/May/2020:07:57:05 +0000] Expiring subscriptions...
I [23/May/2020:07:57:38 +0000] Saving subscriptions.conf...
D [23/May/2020:07:57:45 +0000] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [23/May/2020:07:57:45 +0000] Expiring subscriptions...

Ultima modifica di Sterlok : 23-05-2020 alle 09:18.
Sterlok è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 10:57   #4
Nicodemo Timoteo Taddeo
Senior Member
 
L'Avatar di Nicodemo Timoteo Taddeo
 
Iscritto dal: Mar 2008
Messaggi: 12000
Sfortunatamente non riesco a vedere nulla di utile nel log, puoi dare questi due comandi e vedere se la stampate accesa e collegata via USB viene rilevata?

lsub

lpinfo -v

Ed essendo un HP dovresti provare anche a vedere cosa dice

hp-info -i
Nicodemo Timoteo Taddeo è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 12:53   #5
Sterlok
Member
 
L'Avatar di Sterlok
 
Iscritto dal: Oct 2019
Messaggi: 62
Eccoti le risposte ai comandi che mi hai chesto:

lsusb:

Codice:
Bus 001 Device 005: ID 03f0:3d17 HP, Inc LaserJet P1005
Bus 001 Device 004: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter
Bus 001 Device 003: ID 0424:ec00 Microchip Technology, Inc. (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Microchip Technology, Inc. (formerly SMSC) SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@ubuntu:/home/ubuntu# lpinfo -v

lpinfo -v
Codice:
root@ubuntu:/home/ubuntu# lpinfo -v
network beh
file cups-brf:/
network socket
serial serial:/dev/ttyS0?baud=115200
network http
direct usb://HP/LaserJet%20P1005?serial=LC01RYS
network lpd
network https
network ipp
direct hp:/usb/HP_LaserJet_P1005?serial=LC01RYS
network ipps
direct hpfax

hp-info -i
Codice:
warning: hp-info should not be run as root/superuser.

HP Linux Imaging and Printing System (ver. 3.20.3)
Device Information Utility ver. 5.2

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


hp:/usb/HP_LaserJet_P1005?serial=LC01RYS

Device Parameters (dynamic data):
  Parameter                     Value(s)                                        
  ----------------------------  ----------------------------------------------------------
  agent1-ack                    False                                           
  agent1-desc                   Black toner cartridge                           
  agent1-dvc                    0                                               
  agent1-health                 0                                               
  agent1-health-desc            Good/OK                                         
  agent1-hp-ink                 False                                           
  agent1-id                     0                                               
  agent1-kind                   4                                               
  agent1-known                  False                                           
  agent1-level                  100                                             
  agent1-level-trigger          0                                               
  agent1-sku                    35A                                             
  agent1-type                   1                                               
  agent1-virgin                 False                                           
  back-end                      hp                                              
  cups-printers                 ['HP_LaserJet_P1005']                           
  cups-uri                      hp:/usb/HP_LaserJet_P1005?serial=LC01RYS        
  dev-file                                                                      
  device-state                  1                                               
  device-uri                    hp:/usb/HP_LaserJet_P1005?serial=LC01RYS        
  deviceid                      MFG:Hewlett-Packard;MDL:HP LaserJet             
                                P1005;CMD:ACL;CLS:PRINTER;DES:HP LaserJet P1005;
  duplexer                      0                                               
  error-state                   0                                               
  host                                                                          
  in-tray1                      1                                               
  in-tray2                      1                                               
  is-hp                         True                                            
  media-path                    1                                               
  panel                         0                                               
  panel-line1                                                                   
  panel-line2                                                                   
  photo-tray                    0                                               
  port                          1                                               
  r                             0                                               
  revision                      254                                             
  rg                            000                                             
  rr                            000000                                          
  rs                            000000000                                       
  serial                        LC01RYS                                         
  status-code                   1000                                            
  status-desc                   Idle                                            
  supply-door                   1                                               
  top-door                      1                                               

Model Parameters (static data):
  Parameter                     Value(s)                                        
  ----------------------------  ----------------------------------------------------------
  align-type                    0                                               
  clean-type                    0                                               
  color-cal-type                0                                               
  copy-type                     0                                               
  embedded-server-type          0                                               
  family-class                  ['LJ-Class5']                                   
  fax-type                      0                                               
  fw-download                   True                                            
  icon                          HP_LaserJet_1012.png                            
  io-mfp-mode                   6                                               
  io-mode                       1                                               
  io-support                    2                                               
  job-storage                   0                                               
  linefeed-cal-type             0                                               
  model                         HP_LaserJet_P1005                               
  model-ui                      HP LaserJet p1005                               
  model1                        HP LaserJet P1005 Printer                       
  monitor-type                  0                                               
  panel-check-type              0                                               
  pcard-type                    0                                               
  plugin                        1                                               
  plugin-reason                 1                                               
  power-settings                0                                               
  pq-diag-type                  0                                               
  r-type                        0                                               
  r0-agent1-kind                4                                               
  r0-agent1-sku                 35A                                             
  r0-agent1-type                1                                               
  scan-src                      0                                               
  scan-type                     0                                               
  status-battery-check          0                                               
  status-dynamic-counters       0                                               
  status-type                   8                                               
  support-released              True                                            
  support-subtype               2202411                                         
  support-type                  2                                               
  support-ver                   2.8.2                                           
  tech-class                    ['LJP1XXX']                                     
  tech-subclass                 ['Normal']                                      
  tech-type                     3                                               
  usb-pid                       16663                                           
  usb-vid                       1008                                            
  wifi-config                   0                                               

Done.
Sterlok è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 15:05   #6
Nicodemo Timoteo Taddeo
Senior Member
 
L'Avatar di Nicodemo Timoteo Taddeo
 
Iscritto dal: Mar 2008
Messaggi: 12000
OK, per modo di dire , la stampante viene regolarmente vista dal sistema operativo, ha pure il suo bel deviceid.

Se la stampante funziona, cioè non è rotta, dovrebbe essere per colpa sempre dei driver, qualche dipendenza non soddisfatta o assenza di qualche plugin, prova a dare nel terminale un:

hp-doctor

E vedi cosa ti risponde.

http://manpages.ubuntu.com/manpages/...-doctor.1.html
Nicodemo Timoteo Taddeo è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 15:11   #7
Sterlok
Member
 
L'Avatar di Sterlok
 
Iscritto dal: Oct 2019
Messaggi: 62
Ho fatto come hai detto ed ho lanciato "hp-doctor"

questo è il risultato...

Codice:
HP Linux Imaging and Printing System (ver. 3.20.3)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

error: hp-doctor should not be run as root/superuser
sembra strano ma le ho dato il "sudo"...

Ultima modifica di Sterlok : 23-05-2020 alle 15:15.
Sterlok è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 15:17   #8
Nicodemo Timoteo Taddeo
Senior Member
 
L'Avatar di Nicodemo Timoteo Taddeo
 
Iscritto dal: Mar 2008
Messaggi: 12000
Quote:
Originariamente inviato da Sterlok Guarda i messaggi
Ho fatto come hai detto ed ho lanciato "hp-doctor"

questo è il risultato...

Codice:
HP Linux Imaging and Printing System (ver. 3.20.3)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

error: hp-doctor should not be run as root/superuser
sembra strano ma le ho dato il "sudo"...
Sulla server usi ancora l'account root? Prova a creare un account utente "normale" e eseguire il comando senza sudo. Solo

:~$ hp-doctor
Nicodemo Timoteo Taddeo è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 15:39   #9
Sterlok
Member
 
L'Avatar di Sterlok
 
Iscritto dal: Oct 2019
Messaggi: 62
Ora seza sudo, sta girando bene, e sta installando un botto di roba, tutto in automatico, credo si tratti dei plug-in mancanti, poi aggiorno il 3d, grazie Nicodemo

Ecco lo status di hp-doctor, dopo avere installato i plug-in, e rilanciato il comando:

Codice:
ubuntu@ubuntu:~$ hp-doctor

HP Linux Imaging and Printing System (ver. 3.20.3)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.3)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


Checking for Deprecated items....
No Deprecated items are found


Checking for HPLIP updates....
error: Failed to locate hp-upgrade utility


Checking for Dependencies....
warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------
                                                                                                                                                                      Kernel: 5.4.0-1008-raspi #8-Ubuntu SMP Wed Apr 8 11:13:06 UTC 2020 GNU/Linux
 Host: ubuntu
 Proc: 5.4.0-1008-raspi #8-Ubuntu SMP Wed Apr 8 11:13:06 UTC 2020 GNU/Linux
 Distribution: ubuntu 20.04
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro  20.04 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.20.3

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.20.3



Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 05/23/20 14:44:51
version = 3.20.3


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------
                                                                                                                                                                       error: cups          CUPS - Common Unix Printing System                           REQUIRED        1.1             -               INCOMPAT   'CUPS may not be installed or not running'                                                                                                                                                         gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.50            OK         -
 error: xsane         xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             -               MISSING    'xsane needs to be installed'                                                                                                                                                                    scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.29          OK         -                          error: dbus          DBus - Message bus system                                    REQUIRED        -               1.12.16         MISSING    'DBUS may not be installed or not running'                                                                                                                                                          policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -                          network              network -wget                                                OPTIONAL        -               1.20.3          OK         -
 error: avahi-utils   avahi-utils                                                  OPTIONAL        -               -               MISSING    'avahi-utils needs to be installed'

------------------------
| General Dependencies |
------------------------

 error: libjpeg       libjpeg - JPEG library                                       REQUIRED        -               -               MISSING    'libjpeg needs to be installed'                                                                                                                                                                   error: cups-devel    CUPS devel- Common Unix Printing System development files    REQUIRED        -               -               MISSING    'cups-devel needs to be installed'                                                                                                                                                                 error: cups-image    CUPS image - CUPS image development files                    REQUIRED        -               -               MISSING    'cups-image needs to be installed'
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               b'2.31'         OK         -
 error: libusb        libusb - USB library                                         REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 error: sane-devel    SANE - Scanning library development files                    REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
 error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           -               MISSING    'libnetsnmp-devel needs to be installed'                                                                                                                                                       error: libcrypto     libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           MISSING    'libcrypto needs to be installed'                                                                                                                                                                  python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.8.2           OK         -
 error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               MISSING    'python3-notify2 needs to be installed'
 error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4                         OPTIONAL        4.0             -               MISSING    'python3-pyqt4-dbus needs to be installed'
 error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)         REQUIRED        4.0             -               MISSING    'python3-pyqt4 needs to be installed'
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.16          OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.9           OK         -                         error: python3-devel Python devel - Python development files                      REQUIRED        2.2             3.8.2           MISSING    'python3-devel needs to be installed'
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               7.0.0           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.5.34          OK         -

--------------
| COMPILEDEP |
--------------

 error: libtool       libtool - Library building support services                  REQUIRED        -               -               MISSING    'libtool needs to be installed'                                                                                                                                                                 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               9.3.0           OK         -                           make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.2.1           OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.20.3          OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.20.3          OK         -

----------------------
| Scan Configuration |
----------------------

'/etc/sane.d/dll.d/hpaio' not found.
 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.20.3          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.20.3          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
                                                                                                                                                                       No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------
                                                                                                                                                                       No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

HP_LaserJet_P1005
-----------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_P1005?serial=LC01RYS
PPD: /etc/cups/ppd/HP_LaserJet_P1005.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_P1005.ppd ppd file
PPD Description:                                                                                                                                                       Printer status: printer HP_LaserJet_P1005 is idle.  enabled since Thu May 21 11:26:10 2020
Required plug-in status: Installed
error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_P1005?serial=LC01RYS
error: Device not found
error: Communication status: Failed


--------------
| PERMISSION |
--------------
                                                                                                                                                                 Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing or 'cups' service is not running.
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing or 'cups' service is not running.
error: 'cups-bsd' package is missing or 'cups' service is not running.
error: 'cups-client' package is missing or 'cups' service is not running.
error: 'libcupsimage2-dev' package is missing or 'cups' service is not running.
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'avahi-utils' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible


ENTER SUDO PASSWORD
-------------------                                                                                                                                                    Please enter the sudoer (ubuntu)'s password:

Checking Permissions....


Checking for Configured Queues....                                                                                                                                     warning: Fail to read ppd=/etc/cups/ppd/HP_LaserJet_P1005.ppd file
warning: Insufficient permission to access file /etc/cups/ppd/HP_LaserJet_P1005.ppd
warning: Could not complete Queue(s) configuration check


Checking for HP Properitery Plugin's....
Plugin's already installed

Checking for Printer Status....
error: 'HP_LaserJet_P1005' Printer is either Powered-OFF or Failed to communicate.
Turn On Printer and re-run hp-doctor

Diagnose completed...
La stampante è accesa ed ho rilanciato il comando, ma se non stampa neanche da windows figuriamoci con linux, no?

Ultima modifica di Sterlok : 23-05-2020 alle 15:48.
Sterlok è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 16:18   #10
Nicodemo Timoteo Taddeo
Senior Member
 
L'Avatar di Nicodemo Timoteo Taddeo
 
Iscritto dal: Mar 2008
Messaggi: 12000
A parte gli errori sui permessi, anche dopo aver dato la password del sudo continua a non riuscire ad accedere a /etc/cups/ppd/HP_LaserJet_P1005.ppd, la cosa più importante, purtroppo, è quello che viene dopo:

Codice:
Checking for Printer Status....
error: 'HP_LaserJet_P1005' Printer is either Powered-OFF or Failed to communicate.
Turn On Printer and re-run hp-doctor
La stampante gli risulta irraggiungibile, come fosse spenta o scollegata... Temo si tratti a questo punto di guasto hardware e la sensazione è rafforzata dalle diffcoltà anche con Windows.

Te lo volevo dire prima ma poi ho dimenticato a scriverlo, lo faccio ora. Se hai un altro cavo stampante sostituiscilo, e se nel dispositivo ci son più porte USB cambia anche quella, hai visto mai...
Nicodemo Timoteo Taddeo è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 16:35   #11
Sterlok
Member
 
L'Avatar di Sterlok
 
Iscritto dal: Oct 2019
Messaggi: 62
Siamo al capolinea... prima di postare ho collegato la stampante a due macchine, una windows 7 una windows 10 entrambe a x64, cambiato cavo USB, e provato ad re-installare i driver, ed anche li mi ha segnalato di collegare la stampante al PC, sempre su windows.... la stampante viene riconosciuta, si capisce dal fumetto in basso a destra che poi sparisce, ma da quando mi ha dato "filter error", forse smanettando, ho fatto qualche guasto serio dell'HW o del firm della stampante, credo sia successo cos'ì.

La presi alla CDC circa 10 - 11 anni fà, era una figata dato che potevo stampare con costi bassissimi ad alti regimi, le ho cambiato anche il gommino per la presa di carica dei fogli, ora capire che guasto ha non credo sia importante...

Anche se fuori topic, ora dovrei prenderne una "nuova" con i toner compatibili dato che in azienda siamo pieni.... ciao grazie dell'aiuto alla prossima...
Sterlok è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 17:37   #12
Nicodemo Timoteo Taddeo
Senior Member
 
L'Avatar di Nicodemo Timoteo Taddeo
 
Iscritto dal: Mar 2008
Messaggi: 12000
Giusto per concludere il thread , guarda che a stare a sentire hp-doctor hai il servizio cups spento. Se colleghi un'altra stampante non funzionerebbe lo stesso.

Per accertarti se ha ragione o torto dai uno

service --status-all


Se accanto a cups non appare il [ + ] ma solo [ ], devi avviare il servizio. Ma di questo se ne può parlare dopo
Nicodemo Timoteo Taddeo è offline   Rispondi citando il messaggio o parte di esso
Old 23-05-2020, 17:42   #13
Sterlok
Member
 
L'Avatar di Sterlok
 
Iscritto dal: Oct 2019
Messaggi: 62
Heheh, grazie della speranza
Comunque credo che il servizio CUPS sia attivo, lo raggiungo anche
con il browser...

Codice:
 [ + ]  apparmor
 [ + ]  apport
 [ + ]  atd
 [ + ]  avahi-daemon
 [ - ]  console-setup.sh
 [ + ]  cron
 [ - ]  cryptdisks
 [ - ]  cryptdisks-early
 [ + ]  cups
 [ + ]  cups-browsed
 [ + ]  dbus
 [ - ]  hwclock.sh
 [ + ]  irqbalance
 [ - ]  iscsid
 [ - ]  keyboard-setup.sh
 [ + ]  kmod
 [ - ]  lvm2
 [ - ]  lvm2-lvmpolld
 [ + ]  multipath-tools
 [ + ]  network-manager
 [ + ]  nmbd
 [ - ]  open-iscsi
 [ - ]  plymouth
 [ - ]  plymouth-log
 [ - ]  pppd-dns
 [ + ]  procps
 [ - ]  rsync
 [ + ]  rsyslog
 [ - ]  samba-ad-dc
 [ - ]  saned
 [ - ]  screen-cleanup
 [ + ]  smbd
 [ + ]  ssh
 [ + ]  udev
 [ + ]  ufw
 [ + ]  unattended-upgrades
 [ - ]  uuidd
Sterlok è offline   Rispondi citando il messaggio o parte di esso
 Rispondi


Canon svela EOS R5 e R6, due nuove mirrorless 35mm avanzate e performanti Canon svela EOS R5 e R6, due nuove mirrorless 35...
Aorus 17G XB, l'approccio di Gigabyte al mondo dei notebook gaming Aorus 17G XB, l'approccio di Gigabyte al mondo d...
Ryzen 9 3900XT, Ryzen 7 3800XT e Ryzen 5 3600XT: aspettando Zen 3 Ryzen 9 3900XT, Ryzen 7 3800XT e Ryzen 5 3600XT:...
Hasselblad X1D II 50C, medio formato agile ed elegante – la recensione Hasselblad X1D II 50C, medio formato agile ed el...
HUAWEI P40 Pro+: costa tanto ma fa foto incredibili. La recensione HUAWEI P40 Pro+: costa tanto ma fa foto incredib...
Google: oltre 900 milioni di dollari per...
Sony FE 12-24 mm F2.8 GM: uno zoom grand...
Ninja approda su YouTube: la prima diret...
Bosch mostra Design Vision, l'eBike del ...
Musk: Tesla è 'molto vicina' alla guida ...
Pixii: la fotocamera che ha come compagn...
Videogiochi e Covid-19: come è cambiato ...
Death Stranding e Nvidia vanno d'amore e...
Iliad Point, ora puoi diventare cliente ...
Profoto B10: presentata la serie di flas...
Arca GP, la soluzione di Wolters Kluwer ...
Razer DeathAdder: arriva la versione Min...
Vodafone contro Iliad: offerta Special c...
Incentivi per i veicoli green a Milano: ...
Anche Samsung potrebbe rinunciare al car...
K-Lite Codec Pack Update
K-Lite Mega Codec Pack
Driver NVIDIA GeForce 451.67 WHQL
K-Lite Codec Pack Full
K-Lite Codec Pack Standard
K-Lite Codec Pack Basic
Opera Portable
Opera 69
Process Lasso
Dropbox
NOD32
SmartFTP
Skype
BurnAware Free
ICQ
Tutti gli articoli Tutte le news Tutti i download

Strumenti

Regole
Non Puoi aprire nuove discussioni
Non Puoi rispondere ai messaggi
Non Puoi allegare file
Non Puoi modificare i tuoi messaggi

Il codice vB è On
Le Faccine sono On
Il codice [IMG] è On
Il codice HTML è Off
Vai al Forum


Tutti gli orari sono GMT +1. Ora sono le: 05:29.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Served by www3v