Torna indietro   Hardware Upgrade Forum > Software > Linux, Unix, OS alternativi

ASUS Zenfone 6: top di gamma senza notch, a un gran prezzo. La recensione
ASUS Zenfone 6: top di gamma senza notch, a un gran prezzo. La recensione
ASUS Zenfone 6 è il best-buy del 2019? Si tratta in effetti di uno smartphone estremamente interessante grazie al display veramente full-screen, privo di notch. Costa 449€ per la versione da 6 + 64GB, ha una piattaforma hardware di fascia altissima e finalmente la ZenUI è concreta e funzionale senza disdegnare qualche funzionalità accessoria. Non mancano però i difetti, fra cui un display non luminosissimo.
Recensione Oculus Rift S: grafica da PC Desktop in VR
Recensione Oculus Rift S: grafica da PC Desktop in VR
Oculus Rift S è l'evoluzione di Oculus Rift: parliamo di un visore che, tramite il collegamento al PC Desktop, offre grafica avanzata, e potenzialmente fotorealistica, in Realtà Virtuale. Ecco il nostro parere dopo averlo provato con una serie di giochi
I 16 migliori videogiochi dell'E3 2019
I 16 migliori videogiochi dell'E3 2019
Abbiamo selezionato quelli che secondo noi sono i giochi presentati all'E3 che più faranno parlare di sé nei prossimi mesi. All'interno trovate immagini, filmati, caratteristiche di gioco e tutto quanto è stato mostrato durante l'evento videoludico più importante dell'anno
Tutti gli articoli Tutte le news

Vai al Forum
Rispondi
 
Strumenti
Old 25-01-2010, 15:47   #1
Bounty_
Senior Member
 
L'Avatar di Bounty_
 
Iscritto dal: Jun 2003
Città: Padova
Messaggi: 381
Aiuto problemi in Debian

Ho Debian stable 5.0.3 x AMD 64
su Pentium dual core 2.5GHz
scheda wireless Edimax EW-7128g
http://www.edimax.com/en/support_det...id=1&pl2_id=44

1) Se avvio ed accedo da tastiera poi posso accedere anche da remoto
tramite cavo e VNC;
ma, se cerco di accedere direttamente tramite cavo e VNC non riesco
su Debian gira vino (VNC server per gnome).

2) Se avvio ed accedo da tastiera la scheda wireless funziona;
ma, se poi Iberno e porto il computer dove verra' messo,
(dove non ci puo' stare il monitor, tastiera e mouse)
quindi ripristino la sessione la scheda wireless non funziona
(per risolvere potrei avviare da zero nella posizione senza monitor e tastiera
ma allora ricadrei nel problema 1) )

3) Come blocco il sistema in modo che da remoto funzioni tutto,
ma se qualcuno tenta di accedere da tastiera gli chieda la parola d'ordine (password)
e se si accede da remoto e sul PC e' acceso il monitor sul monitor sia bloccato,
cioe' non si veda cosa si sta' facendo da remoto?

Aiuto grazie
__________________
Lnk ReferendumCostituzionale Ho messo la croce sul NO! per adempiere al mio giuramento militare.

Ultima modifica di Bounty_ : 25-01-2010 alle 15:56.
Bounty_ è offline   Rispondi citando il messaggio o parte di esso
Old 25-01-2010, 15:52   #2
Chiancheri
Senior Member
 
L'Avatar di Chiancheri
 
Iscritto dal: Jan 2006
Città: CATANIA
Messaggi: 2096
Quote:
Originariamente inviato da Bounty_ Guarda i messaggi
Ho Debian stable 5.0.3 x AMD 64
su Pentium dual core 2.5GHz
scheda wireless Edimax EW-7128g
http://www.edimax.com/en/support_det...id=1&pl2_id=44

1) Se avvio ed accedo da tastiera poi posso accedere anche da remoto
tramite cavo e VNC;
ma, se cerco di accedere direttamente tramite cavo e VNC non riesco
su Debian gira vino (VNC server per gnome).

2) Se avvio ed accedo da tastiera la scheda wireless funziona;
ma, se poi Iberno e porto il computer dove verra' messo,
(dove non ci puo' stare il monitor, tastiera e mouse)
quindi ripristino la sessione la scheda wireless non funziona
(per risolvere potrei avviare da zero nella posizione senza monitor e tastiera
ma allora ricadrei nel problema 1) )

Aiuto grazie
1) devi mettere il login automatico

2) devi disabilitare l'accesso con password dopo l'ibernazione

3) a che ti serve vnc? metti delle interfacce web ai servizi che ti servono (amule, torrent, webmin per l'amministrazione) ed il resto con putty.
Chiancheri è offline   Rispondi citando il messaggio o parte di esso
Old 25-01-2010, 16:25   #3
Bounty_
Senior Member
 
L'Avatar di Bounty_
 
Iscritto dal: Jun 2003
Città: Padova
Messaggi: 381
Quote:
Originariamente inviato da Chiancheri Guarda i messaggi
1) devi mettere il login automatico
C' e' gia'.

Quote:
Originariamente inviato da Chiancheri Guarda i messaggi
2) devi disabilitare l'accesso con password dopo l'ibernazione
Quando torno a casa provo.

Quote:
Originariamente inviato da Chiancheri Guarda i messaggi
3) a che ti serve vnc? metti delle interfacce web ai servizi che ti servono
(amule, torrent, webmin per l'amministrazione) ed il resto con putty.
Hum, con VNC ci ho familiarita' ed ad esempio devo pilotare Octave, Httrack Texmacs :
cioe' ,con la stessa macchina che fara' da distributore tramite cavo
di Internet ricevuto tramite wireless; sara' anche server di applicazioni.
Applicazioni che non credo siano state pensate per un uso da terminale.
Purtroppo la macchina finisce in un posto poco accessibile dove non c' e' spazio
per monitor e tastiera.

Grazie intanto
ciao
__________________
Lnk ReferendumCostituzionale Ho messo la croce sul NO! per adempiere al mio giuramento militare.

Ultima modifica di Bounty_ : 25-01-2010 alle 16:30.
Bounty_ è offline   Rispondi citando il messaggio o parte di esso
Old 25-01-2010, 16:36   #4
Chiancheri
Senior Member
 
L'Avatar di Chiancheri
 
Iscritto dal: Jan 2006
Città: CATANIA
Messaggi: 2096
Quote:
Originariamente inviato da Bounty_ Guarda i messaggi
C' e' gia'.


Quando torno a casa provo.


Hum, con VNC ci ho familiarita' ed ad esempio devo pilotare Octave, Httrack Texmacs :
cioe' ,con la stessa macchina che fara' da distributore tramite cavo
di Internet ricevuto tramite wireless; sara' anche server di applicazioni.
Applicazioni che non credo siano state pensate per un uso da terminale.
Purtroppo la macchina finisce in un posto poco accessibile dove non c' e' spazio
per monitor e tastiera.

Grazie intanto
ciao
per tutte le applicazioni grafiche che non prevedono un interfaccia web meglio allora usare ssh -X sopratutto se le controlli da altri client linux/unix (anche mac osx).
Chiancheri è offline   Rispondi citando il messaggio o parte di esso
Old 08-02-2010, 15:48   #5
Bounty_
Senior Member
 
L'Avatar di Bounty_
 
Iscritto dal: Jun 2003
Città: Padova
Messaggi: 381
Ancora problemi, l' Xserver non avvia senza Monitor.

Quote:
Originariamente inviato da Chiancheri
1) devi mettere il login automatico
Ero un po' scettico a fare cosi' per motivi di sicurezza;
ma poi ho scoperto che accedo, faccio quello che mi pare e poi
metto il blocca schermo.
Fintanto che non mi studio come fare con SSH tramite Putty e
a tunnellizzare VNC in SSH, intanto potevo usare l'accesso automatico
e VNC senza SSH nella rete interna poteva anche andare bene
.

Ma, purtroppo se l' Xserver non trova un mouse, una tastiera,
e soprattutto un Monitor, ne smonta i moduli; cosi' quando
smonta il modulo del Monitor, non puo' creare uno screen e un display
cosi' l' Xserver non avvia, di conseguenza non avvia gdm, e il Server VNC.
(Ho capito cio' dal Log di X).
Cioe' in camera funziona tutto, mettendo il Computer tra finestra e gli scuri del balcone
non ci si riesce ad accedere da remoto per quanto sopra.

Come, dove, posso configurare un display di default nella configurazione di Xserver
in modo che, anche se non ce l'ha collegato e neppure il mouse e la tastiera
possa comunque avviare efficacemente l' Xserver e gdm e vino (VNC server di gnome) ??
Aiutooo grazie in anticipo.

Ciao.
__________________
Lnk ReferendumCostituzionale Ho messo la croce sul NO! per adempiere al mio giuramento militare.

Ultima modifica di Bounty_ : 08-02-2010 alle 16:11.
Bounty_ è offline   Rispondi citando il messaggio o parte di esso
Old 08-02-2010, 19:15   #6
Gimli[2BV!2B]
Senior Member
 
L'Avatar di Gimli[2BV!2B]
 
Iscritto dal: Feb 2006
Città: Parma
Messaggi: 3008
Io con Vino c'ho litigato un paio di volte, ma ha vinto lui. Nel primo caso era una questione di risoluzione sbagliata, nel secondo caso si era rotto e non forniva indizi.
Personalmente lo trovo molto limitante, ma certamente è veloce da configurare e usare (se funziona al primo colpo).

Propongo di evitare che HAL capisca quali periferiche non sono collegate.
Fai un backup di /etc/X11/xorg.conf e creane uno con questo contenuto:
Codice:
Section "InputDevice"
  Identifier  "Generic Keyboard"
  Driver    "kbd"
  Option    "CoreKeyboard"
  Option    "XkbRules"    "xorg"
  Option    "XkbModel"    "pc105"
  Option    "XkbLayout"   "it"
EndSection

Section "InputDevice"
  Identifier  "Configured Mouse"
  Driver    "mouse"
  Option    "CorePointer"
  Option    "Device"      "/dev/input/mice"
  Option    "Protocol"      "ExplorerPS/2"
  Option    "Emulate3Buttons" "true"
EndSection

Section "Device"
  Identifier  "Video Card"
  Driver    "vesa"
EndSection

Section "Monitor"
  Identifier  "Default Monitor"
EndSection

Section "Screen"
  Identifier  "Default Screen"
  Device    "Video Card"
  Monitor   "Default Monitor"
  DefaultDepth  24
EndSection

Section "ServerLayout"
  Identifier  "Default Layout"
  Screen    "Default Screen"
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
EndSection

Section "ServerFlags"
  Option "AutoAddDevices" "False"
  Option "AllowEmptyInput" "False"
EndSection
Se non dovesse funzionare posta /var/log/Xorg.0.log
__________________
~Breve riferimento ai comandi GNU/Linux (ormai non molto breve...)
Gimli[2BV!2B] è offline   Rispondi citando il messaggio o parte di esso
Old 10-03-2010, 18:49   #7
Bounty_
Senior Member
 
L'Avatar di Bounty_
 
Iscritto dal: Jun 2003
Città: Padova
Messaggi: 381
Mi hanno cambiato la scheda madre in assistenza e ho messo un gruppo di
continuita' per schermare quello che dall'impianto di casa mi aveva mezzo
bruciato la scheda.

Ho ancora il problema di cui sopra, ho provato la configurazione che mi avete detto
ma, mi dice : "no screens found"
dopodiche' leggendo su internet ho fatto varie prove che ora si vedono commentate:

xorg.conf
Quote:
Originariamente inviato da xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection



Section "Device"
Identifier "Configured Video Device"
#va' fuori frequenza Horizzontale# Driver "vesa"
##errore mancano screens# Driver "vgahw"
##errore mancano screens# Driver "intel.ids"
# NON e' Driver "intel_drv"
# NON e' Driver "i915"
# Driver "intel"
# intelfb_i2c.c
# intelfb.h
# intelfb.ko
# i810_drv.so
# vbe
# Kernel modules: intel-agp
EndSection

Section "Monitor"
Identifier "Configured Monitor" ######
# Identifier "Default Monitor"
### Vendorname "Generic CRT Display"
### Modelname "CRT 1024x768"
Horizsync 56.0 ######
Vertrefresh 70.0 ######
# Horizsync 31.5-64.0
# Vertrefresh 56.0-75.0
# HTimings
# VTimings
## 1024x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 76.16 MHz
Modeline "1024x768_70.00" 76.16 1024 1080 1192 1360 768 769 772 800 -HSync +Vsync ##OK##


EndSection


Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device" ######
Monitor "Configured Monitor" ######
# Monitor "Default Monitor"
SubSection "Display"
Depth 24
# Modes "1024x768" "800x600"
Modes "1024x768_70.00" "800x600" ##OK##
### Virtual 1024 768
EndSubSection
EndSection



####COME ERA IN ORIGINE######
# Section "Monitor"
# Identifier "Configured Monitor"
# EndSection

# Section "Screen"
# Identifier "Default Screen"
# Monitor "Configured Monitor"
# EndSection
Nei casi migliori mi diceva "no screens found"
In piu' quando faccio una modifica a "xorg.conf"
1 volta) accendo il sistema con monitor, tastiera, mouse scollegati e accedo da cavo di rete e VNC, quindi funziona. Dopodiche' ,
2 volta) accendo il sistema con monitor, tastiera, mouse scollegati e accedo da cavo di rete e VNC, quindi funziona. Dopodiche' ,
3 volta) accendo il sistema con monitor, tastiera, mouse scollegati e,
non funziona affatto, ne' altre volte successive

/var/log/Xorg.0.log
Quote:
Originariamente inviato da /var/log/Xorg.0.log
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2)
Current Operating System: Linux localhost 2.6.26 #1 SMP Wed Jan 6 20:17:01 CET 2010 x86_64
Build Date: 11 June 2009 09:45:25AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 10 19:04:18 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first keyboard device.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7c31c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,29c0 card 1849,29c0 rev 10 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,29c2 card 1849,29c2 rev 10 class 03,00,00 hdr 00
(II) PCI: 00:1b:0: chip 8086,27d8 card 1849,3662 rev 01 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1849,27c8 rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1849,27c9 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1849,27ca rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1849,27cb rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1849,27cc rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev e1 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b8 card 1849,27b8 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,27df card 1849,27df rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,27c0 card 1849,27c0 rev 01 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1849,27da rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 10ec,8168 card 1849,8168 rev 03 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1814,0301 card 1432,7128 rev 00 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:28:1), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xfeb00000 - 0xfebfffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 16, Mem @ 0xfe980000/19, 0xd0000000/28, 0xfe800000/20, I/O @ 0xdc00/3
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[1] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[2] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[3] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[4] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[5] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[6] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[7] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[8] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[9] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[10] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[11] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[12] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[13] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[14] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[16] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[17] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[24] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[1] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[2] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[3] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[4] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[5] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[6] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[7] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[8] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[9] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[10] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[11] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[12] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[13] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[14] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[16] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[17] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[24] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[5] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[6] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[7] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[8] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[9] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[14] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[15] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[16] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[17] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[18] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[19] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[20] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[21] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[22] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[23] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[27] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[28] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[29] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[30] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched intel from file name intel.ids in autoconfig
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset G33 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[5] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[6] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[7] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[8] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[9] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[14] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[15] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[16] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[17] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[18] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[19] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[20] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[21] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[22] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[23] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[27] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[28] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[29] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[30] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[5] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[6] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[7] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[8] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[9] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[19] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[20] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[21] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[23] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[24] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[25] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[26] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[30] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[31] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[32] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[33] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) G33
(--) intel(0): Chipset: "G33"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFE980000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(==) intel(0): Enabling EXA render acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "IQT", prod id 6000
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0 40.50 640 656 720 800 480 481 484 506 -hsync -vsync (50.6 kHz)
(II) intel(0): Modeline "800x600"x0.0 67.50 800 840 920 1056 600 603 607 639 +hsync +vsync (63.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(II) intel(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "IQT", prod id 6000
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 1024x768_70.00
(II) intel(0): detected 1024 kB GTT.
(II) intel(0): detected 7164 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (320, 240) mm
(**) intel(0): DPI set to (81, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000b00
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfe800000 - 0xfe8fffff (0x100000) MS[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[b]
[2] 0 0 0xfe980000 - 0xfe9fffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[8] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[9] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[10] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[11] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[12] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[18] 0 0 0x0000dc00 - 0x0000dc07 (0x8) IS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[22] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[23] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[24] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[25] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[26] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[27] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[28] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[29] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[30] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[33] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[34] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[35] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[36] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[37] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfe980000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0400000, handle = 0xd0400000
(II) intel(0): [drm] mapped back buffer at 0xd1400000, handle = 0xd1400000
(II) intel(0): [drm] mapped depth buffer at 0xd1800000, handle = 0xd1800000
(II) intel(0): [drm] mapped classic textures at 0xd1c00000, handle = 0xd1c00000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xd0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x006ff000 (pgoffset 1791)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01400000 (pgoffset 5120)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x01c00000 (pgoffset 7168)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00032fff: overlay registers (4 kB)
(II) intel(0): 0x00033000-0x00033fff: HW status (4 kB)
(II) intel(0): 0x00400000-0x007fffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x006ff000: end of stolen memory
(II) intel(0): 0x00800000-0x013fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01400000-0x017fffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01800000-0x01bfffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x03bfffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 320 x 240
(WW) Configured Mouse: No Device specified, looking for one...
(II) Configured Mouse: Setting Device option to "/dev/input/mice"
(--) Configured Mouse: Device: "/dev/input/mice"
(==) Configured Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Generic Keyboard: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) intel(0): EDID vendor "IQT", prod id 6000
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0 40.50 640 656 720 800 480 481 484 506 -hsync -vsync (50.6 kHz)
(II) intel(0): Modeline "800x600"x0.0 67.50 800 840 920 1056 600 603 607 639 +hsync +vsync (63.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(II) intel(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "IQT", prod id 6000
(II) intel(0): EDID vendor "IQT", prod id 6000
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0 40.50 640 656 720 800 480 481 484 506 -hsync -vsync (50.6 kHz)
(II) intel(0): Modeline "800x600"x0.0 67.50 800 840 920 1056 600 603 607 639 +hsync +vsync (63.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(II) intel(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "IQT", prod id 6000
(II) intel(0): EDID vendor "IQT", prod id 6000
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0 40.50 640 656 720 800 480 481 484 506 -hsync -vsync (50.6 kHz)
(II) intel(0): Modeline "800x600"x0.0 67.50 800 840 920 1056 600 603 607 639 +hsync +vsync (63.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(II) intel(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "IQT", prod id 6000
(II) intel(0): EDID vendor "IQT", prod id 6000
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0 40.50 640 656 720 800 480 481 484 506 -hsync -vsync (50.6 kHz)
(II) intel(0): Modeline "800x600"x0.0 67.50 800 840 920 1056 600 603 607 639 +hsync +vsync (63.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(II) intel(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "IQT", prod id 6000
Aiuto grazie
__________________
Lnk ReferendumCostituzionale Ho messo la croce sul NO! per adempiere al mio giuramento militare.

Ultima modifica di Bounty_ : 10-03-2010 alle 19:16.
Bounty_ è offline   Rispondi citando il messaggio o parte di esso
Old 10-03-2010, 20:37   #8
Gimli[2BV!2B]
Senior Member
 
L'Avatar di Gimli[2BV!2B]
 
Iscritto dal: Feb 2006
Città: Parma
Messaggi: 3008
Fai un backup del tuo file e prova questo:
Codice:
Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver     "kbd"
  Option "XkbRules" "xorg"
  Option "XkbModel" "pc105"
  Option "XkbLayout" "it"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver     "mouse"
EndSection

Section "Device"
  Identifier "Configured Video Device"
  Driver     "intel"
EndSection

Section "Monitor"
  Identifier "Configured Monitor"
  Horizsync   56.0
  Vertrefresh 70.0
  Modeline "1024x768_70" 76.16 1024 1080 1192 1360 768 769 772 800 -HSync +Vsync
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device     "Configured Video Device"
  Monitor    "Configured Monitor"
  DefaultDepth 24
  SubSection   "Display"
    Depth 24
    Modes "1024x768_70" "800x600"
  EndSubSection
EndSection

Section "ServerFlags"
  Option "AutoAddDevices" "False"
  Option "AllowEmptyInput" "False"
EndSection
Le ServerFlags, la parte che consideravo più importante non l'hai messa.
Posta l'Xorg.0.log e specifica cosa succede se ancora non ci siamo.
__________________
~Breve riferimento ai comandi GNU/Linux (ormai non molto breve...)
Gimli[2BV!2B] è offline   Rispondi citando il messaggio o parte di esso
Old 14-03-2010, 18:46   #9
Bounty_
Senior Member
 
L'Avatar di Bounty_
 
Iscritto dal: Jun 2003
Città: Padova
Messaggi: 381
Quote:
Originariamente inviato da 'Gimli[2BV!2B
Le ServerFlags, la parte che consideravo più importante non l'hai messa.
Adesso ho capito a cosa servono e le ho messe

Leggendo altrove ho messo anche:

Quote:
Originariamente inviato da xorg.conf Section Device
Option "IgnoreEDID" "true"###########
Option "NoDCC" "true"###########
Option "DDC" "false"###########
Per le prime due righe ho visto su:
http://ubuntuforums.org/showthread.php?t=51587
Per la terza ho visto su:
http://forum.html.it/forum/showthrea...readid=1346600

Notavo che nel mio file di Log era scritto:
No SDVO device found
quindi ho messo quella riga su google e navigando
mi sono accorto che fanno riferimento ad un bug di X :
http://bugs.freedesktop.org/show_bug.cgi?id=14611

Patch
Quote:
Originariamente inviato da Patch
From 1008bd6bce3b2c5ececaf49ea0d9ebb9bf0d1b98 Mon Sep 17 00:00:00 2001
From: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Date: Fri, 24 Apr 2009 17:08:32 +0100
Subject: [PATCH] Always enable outputs that have been forced on in the configuration file

If the user has gone to the effort of manually enabling an output in
the configuration file assume that they know what they're doing.
---
hw/xfree86/modes/xf86Crtc.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/hw/xfree86/modes/xf86Crtc.c b/hw/xfree86/modes/xf86Crtc.c
index c6eed33..3c10a7a 100644
--- a/hw/xfree86/modes/xf86Crtc.c
+++ b/hw/xfree86/modes/xf86Crtc.c
@@ -1544,7 +1544,8 @@ xf86ProbeOutputModes (ScrnInfoPtr scrn, int maxX, int maxY)
*/
output->status = (*output->funcs->detect)(output);

- if (output->status == XF86OutputStatusDisconnected)
+ if (output->status == XF86OutputStatusDisconnected &&
+ !xf86ReturnOptValBool(output->options, OPTION_ENABLE, FALSE))
{
xf86OutputSetEDID (output, NULL);
continue;
--
1.5.4.1
Ho scaricato tale Patch, l'ho portata sul PC e da root l'ho cliccata,
la finestra mi ha proposto "esegui in terminale" e ho fatto cosi' .
Ho provatto se funziona ma ancora niente, allora leggo la Patch e
mi sembra si riferisca ad un modulo "xf86Crtc.c" che facendo trova
sul PC si direbbe che io non ho.
Come faccio?


xorg.conf
Quote:
Originariamente inviato da xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection



Section "Device"
Identifier "Configured Video Device"
#va' fuori frequenza Horizzontale# Driver "vesa"
#errore mancano screens Driver "vgahw"
# NON e' Driver "i915"

Driver "intel"
#/lib/modules/2.6.26/kernel/drivers/video/intelfb
#2.6.26-2-amd64
Option "IgnoreEDID" "true"###########
Option "NoDCC" "true"###########
Option "DDC" "false"###########
# intelfb_i2c.c
# intelfb.h
# intelfb.ko
# i810_drv.so
# vbe
# Kernel modules: intel-agp
EndSection

Section "Monitor"
Identifier "Configured Monitor"######
# Identifier "Default Monitor"
### Vendorname "Generic CRT Display"
### Modelname "CRT 1024x768"
# Horizsync 56.0
# Vertrefresh 70.0
# Horizsync 31.5-64.0
# Vertrefresh 56.0-75.0
Horizsync 31.5-64.0######
Vertrefresh 56.0-78.80######
# HTimings
# VTimings
Option "Enable" "true"######
## 1024x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 76.16 MHz
## SI MA... ## Modeline "1024x768_70.00" 70.00 1024 1080 1192 1360 768 769 772 800 -HSync +Vsync##OK## 76.16


#(II) intel(0): Printing DDC gathered Modelines:
#(II) intel(0): Modeline "640x480"x0.0 40.50 640 656 720 800 480 481 484 506 -hsync -vsync (50.6 kHz)
#(II) intel(0): Modeline "800x600"x0.0 67.50 800 840 920 1056 600 603 607 639 +hsync +vsync (63.9 kHz)
#(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
#(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
#(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
#(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
#(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
#(II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
#(II) intel(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
#(II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
#(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
#(II) intel(0): EDID vendor "IQT", prod id 6000
#(II) intel(0): Output VGA connected

# Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
Modeline "1024x768" 76.16 1024 1040 1136 1312 768 769 772 800 -hsync +vsync #(56.00 kHz)
Option "PreferredMode" "1024x768"############

EndSection


Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"######
Monitor "Configured Monitor"######
# Monitor "Default Monitor"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
## SI MA... ## Modes "1024x768_70.00" "800x600"##OK##
### Virtual 1024 768
EndSubSection
EndSection

Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "AllowEmptyInput" "False"
EndSection


# Section "Monitor"
# Identifier "Configured Monitor"
# EndSection

# Section "Screen"
# Identifier "Default Screen"
# Monitor "Configured Monitor"
# EndSection
Xorg.0.log
Quote:
Originariamente inviato da Xorg.0.log
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2)
Current Operating System: Linux localhost 2.6.26 #1 SMP Wed Jan 6 20:17:01 CET 2010 x86_64
Build Date: 11 June 2009 09:45:25AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 11 16:16:20 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first keyboard device.
(**) Option "AllowEmptyInput" "False"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7c31c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,29c0 card 1849,29c0 rev 10 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,29c2 card 1849,29c2 rev 10 class 03,00,00 hdr 00
(II) PCI: 00:1b:0: chip 8086,27d8 card 1849,3662 rev 01 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1849,27c8 rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1849,27c9 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1849,27ca rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1849,27cb rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1849,27cc rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev e1 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b8 card 1849,27b8 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,27df card 1849,27df rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,27c0 card 1849,27c0 rev 01 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1849,27da rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 10ec,8168 card 1849,8168 rev 03 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1814,0301 card 1432,7128 rev 00 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:28:1), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xfeb00000 - 0xfebfffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 16, Mem @ 0xfe980000/19, 0xd0000000/28, 0xfe800000/20, I/O @ 0xdc00/3
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[1] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[2] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[3] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[4] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[5] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[6] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[7] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[8] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[9] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[10] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[11] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[12] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[13] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[14] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[16] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[17] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[24] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[1] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[2] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[3] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[4] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[5] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[6] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[7] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[8] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[9] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[10] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[11] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[12] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[13] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[14] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[16] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[17] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[24] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[5] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[6] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[7] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[8] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[9] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[14] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[15] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[16] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[17] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[18] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[19] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[20] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[21] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[22] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[23] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[27] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[28] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[29] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[30] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset G33 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[5] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[6] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[7] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[8] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[9] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[14] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[15] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[16] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[17] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[18] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[19] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[20] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[21] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[22] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[23] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[27] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[28] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[29] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[30] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfebf8000 - 0xfebfffff (0x8000) MX[b]
[5] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[b]
[6] -1 0 0xfdeff000 - 0xfdefffff (0x1000) MX[b]
[7] -1 0 0xfe977c00 - 0xfe977fff (0x400) MX[b]
[8] -1 0 0xfe978000 - 0xfe97bfff (0x4000) MX[b]
[9] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[11] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[b](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x00000400 - 0x0000041f (0x20) IX[b]
[19] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[20] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[b]
[21] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[b]
[23] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[b]
[24] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[25] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[26] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[b]
[30] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[31] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[b]
[32] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[33] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) G33
(--) intel(0): Chipset: "G33"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFE980000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(==) intel(0): Enabling EXA render acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output VGA disconnected
(EE) intel(0): No valid modes.
(II) UnloadModule: "intel"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/lib/xorg/modules//libvgahw.so
(II) UnloadModule: "vbe"
(II) Unloading /usr/lib/xorg/modules//libvbe.so
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules//libint10.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found
Per caso, serve?
Quote:
Option "dpms"
Aiuto
__________________
Lnk ReferendumCostituzionale Ho messo la croce sul NO! per adempiere al mio giuramento militare.

Ultima modifica di Bounty_ : 14-03-2010 alle 18:55. Motivo: leggola -> leggo la
Bounty_ è offline   Rispondi citando il messaggio o parte di esso
Old 15-03-2010, 19:02   #10
Bounty_
Senior Member
 
L'Avatar di Bounty_
 
Iscritto dal: Jun 2003
Città: Padova
Messaggi: 381
Ho aperto un Bug report su bugs.freedesktop.org

Ho aperto un Bug report su bugs.freedesktop.org

https://bugs.freedesktop.org/show_bug.cgi?id=27091

Speriamo bene

Ciao
__________________
Lnk ReferendumCostituzionale Ho messo la croce sul NO! per adempiere al mio giuramento militare.
Bounty_ è offline   Rispondi citando il messaggio o parte di esso
Old 15-03-2010, 20:39   #11
Gimli[2BV!2B]
Senior Member
 
L'Avatar di Gimli[2BV!2B]
 
Iscritto dal: Feb 2006
Città: Parma
Messaggi: 3008
Dai link che hai riportato, direi che usare Vino con la tua scheda è la cosa più sconsigliabile (al momento).
Hai provato tightvncserver, oppure vnc4server o xrdp? Questi non si appoggiano ad un monitor fisico (come Vino ed x11vnc) e dovrebbero funzionare nonostante i tuoi problemi.
Con tutti dovrebbe essere tranquillamente possibile mantenere attivo il monitor virtuale e riconnettersi più volte, però non sarebbe possibile interagire direttamente con la sessione grafica virtuale se si vuole utilizzare anche un monitor fisico.
Se i programmi che vuoi eseguire da remoto sono destinati ad essere chiusi alla disconnessione, potresti anche provare il tunneling di X in ssh, come già suggerito.

Riguardo alla patch che hai trovato, è stata applicata il 22 febbraio di quest'anno, quindi dovrà trascorrere del tempo prima che raggiunga gli Xorg distribuiti con le distribuzioni.
Probabilmente non arriverà mai in Debian 5.

Per applicarla per conto tuo dovresti scaricare i sorgenti di Xorg Debian, scompattarli, applicare la patch, installare tutte le dipendenze di compilazione, compilare ed installare.

Traccia comandi da eseguire (è da un pezzo che non compilo un pacchetto in Debian, quindi potrei scordare qualcosa):
Codice:
apt-get install build-essential
cd /usr/src
apt-get source xorg
cd xorg-VERSIONE
patch -p0 < /posizione/file/patch
apt-get build-dep xorg
dpkg-buildpackage -rfakeroot -uc -b
dpkg -i pacchetto_prodotto.deb
__________________
~Breve riferimento ai comandi GNU/Linux (ormai non molto breve...)
Gimli[2BV!2B] è offline   Rispondi citando il messaggio o parte di esso
Old 16-03-2010, 17:55   #12
Bounty_
Senior Member
 
L'Avatar di Bounty_
 
Iscritto dal: Jun 2003
Città: Padova
Messaggi: 381
Parzialmente risolto

Ho ripensato a:
Quote:
#va' fuori frequenza Horizzontale# Driver "vesa"
e al fatto che le due righe:
Quote:
# 1024x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 76.16 MHz
Modeline "1024x768_70.00" 76.16 1024 1080 1192 1360 768 769 772 800 -HSync +Vsync
le avevo ricavate dal terminale con il comando "gtf"
e, anche se assomigliavano alle righe generate nel "Xorg.0.log" ( quando
il Monitor, la Tastiera e il Mouse erano collegati e non c'erano i parametri:
Quote:
Option "IgnoreEDID" "true"
Option "NoDCC" "true"
Option "DDC" "false"
quindi quando X si configurava da se' )
le cifre dei valori erano diverse e 76.16 non cadeva nell'intervallo
Quote:
Horizsync 31.5-64.0
Vertrefresh 56.0-75.0
Di conseguenza ho ritenuto piu' attendibili i parametri di "Xorg.0.log" cioe' :
Quote:
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0 40.50 640 656 720 800 480 481 484 506 -hsync -vsync (50.6 kHz)
(II) intel(0): Modeline "800x600"x0.0 67.50 800 840 920 1056 600 603 607 639 +hsync +vsync (63.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz)
(II) intel(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "IQT", prod id 6000
(II) intel(0): Output VGA connected
Visto che a me' interessava la risoluzione di 1024x768

Quote:
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz)
Ho messo cosi' :
Quote:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection



Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
Option "NoDCC"###########
Option "IgnoreEDID" "true"###########

Option "NoDCC" "true"###########
Option "DDC" "false"### ####
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Horizsync 31.5-64.0#HorizSync horizsync
Vertrefresh 56.0-78.80#VertRefresh vertrefresh
Option "Enable" "true"######
# 1024x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 76.16 MHz
Modeline "1024x768_70.00" 76.16 1024 1040 1136 1312 768 769 772 800 -HSync +VSync#-hsync +vsync
Option "PreferredMode" "1024x768"
EndSection


Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
SubSection "Display"
Depth 24
# Modes "1024x768" "800x600"
Modes "1024x768_70.00" "1024x768" "800x600"##OK##
Virtual 1024 768
EndSubSection
EndSection

Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "AllowEmptyInput" "False"
EndSection
sperando che azzeccando la risoluzione il driver vesa
funzionasse visto che non risente del bug del driver "intel" per cui ho aperto il bugreport.
Ha funzionato !!!! Anche se la risoluzione che vedo in VNC e che ho verificato su Xorg.0.log
adesso e' di 1920x1440 , un po' grandina.

Concludendo fidatevi di piu' dell'autoconfigurazione di X verificabile su Xorg.0.log
per azzeccare la modeline piuttosto che del comando GTF,
usate il comando GTF solo per guardare e rispettare la corretta sintassi
della linea modeline ma prendete i valori da Xorg.0.log e usate:
Quote:
Driver "vesa"
Se qualcuno mi suggerisce come modificare la risoluzione da 1920x1440 a 1024x768 sarei grato.

Ciao
__________________
Lnk ReferendumCostituzionale Ho messo la croce sul NO! per adempiere al mio giuramento militare.
Bounty_ è offline   Rispondi citando il messaggio o parte di esso
Old 16-03-2010, 21:26   #13
Chiancheri
Senior Member
 
L'Avatar di Chiancheri
 
Iscritto dal: Jan 2006
Città: CATANIA
Messaggi: 2096
Quote:
Originariamente inviato da Bounty_ Guarda i messaggi
Ero un po' scettico a fare cosi' per motivi di sicurezza;
ma poi ho scoperto che accedo, faccio quello che mi pare e poi
metto il blocca schermo.
Fintanto che non mi studio come fare con SSH tramite Putty e
a tunnellizzare VNC in SSH, intanto potevo usare l'accesso automatico
e VNC senza SSH nella rete interna poteva anche andare bene
.

Ma, purtroppo se l' Xserver non trova un mouse, una tastiera,
e soprattutto un Monitor, ne smonta i moduli; cosi' quando
smonta il modulo del Monitor, non puo' creare uno screen e un display
cosi' l' Xserver non avvia, di conseguenza non avvia gdm, e il Server VNC.
(Ho capito cio' dal Log di X).
Cioe' in camera funziona tutto, mettendo il Computer tra finestra e gli scuri del balcone
non ci si riesce ad accedere da remoto per quanto sopra.

Come, dove, posso configurare un display di default nella configurazione di Xserver
in modo che, anche se non ce l'ha collegato e neppure il mouse e la tastiera
possa comunque avviare efficacemente l' Xserver e gdm e vino (VNC server di gnome) ??
Aiutooo grazie in anticipo.

Ciao.
cmq non è necessario tunnelizzare vnc, ti basta cgywin
Chiancheri è offline   Rispondi citando il messaggio o parte di esso
 Rispondi


ASUS Zenfone 6: top di gamma senza notch, a un gran prezzo. La recensione ASUS Zenfone 6: top di gamma senza notch, a un g...
Recensione Oculus Rift S: grafica da PC Desktop in VR Recensione Oculus Rift S: grafica da PC Desktop ...
I 16 migliori videogiochi dell'E3 2019 I 16 migliori videogiochi dell'E3 2019
Leica Q2: primo contatto con la  full frame da taschino da 47,3 megapixel Leica Q2: primo contatto con la full frame da t...
Xiaomi Mi 9 SE recensione: gran display, ma non ci siamo sull'autonomia Xiaomi Mi 9 SE recensione: gran display, ma non ...
Cosa è la Missione Italiana CES p...
WhatsApp: volete inviare le immagini in ...
Come si può attivare una strategi...
Microsoft, i notebook Huawei continueran...
IBM Think Summit: inizia una nuova era p...
SilentiumPC presenta le ventole Stella H...
Huawei ufficializza EMUI 9.1 con Android...
Hacker entra nella rete della NASA sfrut...
THE C64 in arrivo una nuova versione a g...
TIM e Vodafone scommettono sul 5G con le...
Apple rilascia le prime beta pubbliche d...
Bill Gates ammette, perdere contro Andro...
HP continua a innovare nelle stampanti c...
Microsoft, il dispositivo pieghevole sup...
Metal Gear Solid in 4K e a 60fps grazie ...
SmartFTP
Process Lasso
Chromium
K-Lite Mega Codec Pack
K-Lite Codec Pack Full
Dropbox
Trillian
GeForce Experience
IObit Uninstaller
OCCT
Firefox Portable
ZoneAlarm Antivirus free
K-Lite Codec Pack Standard
K-Lite Codec Pack Basic
Mozilla Thunderbird 60
Tutti gli articoli Tutte le news Tutti i download

Strumenti

Regole
Non Puoi aprire nuove discussioni
Non Puoi rispondere ai messaggi
Non Puoi allegare file
Non Puoi modificare i tuoi messaggi

Il codice vB è On
Le Faccine sono On
Il codice [IMG] è On
Il codice HTML è Off
Vai al Forum


Tutti gli orari sono GMT +1. Ora sono le: 00:53.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Served by www2v