Problema masterizzatore Plextor 12/10/32A

[akiro]

salve, ho un problema con il PleXWriter 12/10/32A (PX-W1210TA)... da un po' di tempo nn riuscivo più a masterizzare un cd-rw di vecchia data... ma non avendo problemi con i normali, mi ero deciso ad acquistar un paio di cd-rw nuovi... bhe adesso si non riesco a masterizzare neppure quelli! Il masterizzatore ha circa 2 anni di vita (ma temo sia già fuori garanzia), ed i supporti sono di marche ben note: SKC, TDK ed un altra che ignoro al momento...
Ho provato a cancellare in tutti i modi i supporti (full, quick, cip e ciop) ma alla fine sempre lo stesso errore: "could not perform end of track"... mi son deciso così a contattar l'assistenza via e-mail...
Su loro consiglio son passato dal firmware 1.08 al nuovissimo 1.10 ... l'unica cosa che è cambiata è il messaggio di errore... mi pare sia qualkosa come "queued error"
Se qualkuno se ne intende di log di errore di Nero, di seguito ne metto un paio...

[akiro]

Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 05/05/99 22.22.00
Nero Version: 5.5.7.2
Recorder: <PLEXTOR CD-R PX-W1210A> Version: 1.08 - HA 0 TA 0 - 5.5.7.2
Adapter driver: <ESDI_506
> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <CREATIVE DVD-ROM DVD6240E>Version: 0101 - HA 0 TA 1 - 5.5.7.2
Adapter driver: <ESDI_506
> HA 0
Bus Type : default (0) -> ATAPI
PLEXTOR CD-R PX-W1210A (Target 0, E: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
CREATIVE DVD-ROM DVD6240E (Target 1, F: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 510MB (523200kB)
Free physical memory: 0MB (176kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off

CD-ROM (ISO)
18.2.2003

2.21.15 #1 Phase 72 File dlgbrnst.cpp, Line 1436
BURN-Proof activated

2.21.16 #2 Text 0 File Reader.cpp, Line 117
Reader running

2.21.16 #3 Text 0 File Writer.cpp, Line 127
Writer PLEXTOR CD-R PX-W1210A running

2.21.16 #4 ISO9660GEN -11 File geniso.cpp, Line 4307
First writeable address = 0 (0x00000000)

2.21.16 #5 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 271384 (271384) = #271384/60:18.34
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

2.21.18 #6 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media: 337347 (74:59.72)
Last address to be written: 271386 (60:20.36)

2.21.20 #7 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder: PLEXTOR CD-R PX-W1210A;
CDRW code: 00 97 26 21; OSJ entry from: SKC Co., Ltd.
ATIP Data:
Special Info [hex] 1: B0 00 CE, 2: 61 1A 15 (LI 97:26.21), 3: 4A 3B 49 (LO 74:59.73)
Additional Info [hex] 1: 24 1A D0, 2: 00 00 00, 3: 00 00 00 (invalid)

2.21.20 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PLEXTOR CD-R PX-W1210A for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 556101632

2.21.20 #9 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.

2.21.20 #10 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 271384 (271384) = #271384/60:18.34
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 271382 blocks [PLEXTOR CD-R PX-W1210A]
--------------------------------------------------------------

2.21.20 #11 Phase 24 File dlgbrnst.cpp, Line 1436
Caching of files started

2.21.20 #12 Phase 25 File dlgbrnst.cpp, Line 1436
Caching of files completed

2.21.20 #13 Phase 36 File dlgbrnst.cpp, Line 1436
Burn process started at 10x (1.500 KB/s)

2.21.20 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

2.21.20 #15 Text 0 File Mmc.cpp, Line 15217
Set BUFE: BURN-Proof -> ON

2.21.48 #16 SCSI -1106 File Cdrdrv.cpp, Line 1411
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03A98A88
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

2.21.48 #17 mmc -1106 File Writer.cpp, Line 321
Power calibration error

2.21.48 #18 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

2.21.48 #19 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

2.21.49 #20 CDR -201 File WriterStatus.cpp, Line 186
Invalid writestate

2.21.49 #21 TRANSFER -18 File WriterStatus.cpp, Line 186
Could not perform EndTrack

2.21.49 #22 SCSI -1026 File Cdrdrv.cpp, Line 1207
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x04

2.21.49 #23 mmc -1026 File WriterStatus.cpp, Line 225
Current program area empty

2.21.49 #24 TRANSFER -19 File WriterStatus.cpp, Line 225
Could not perform Fixation

2.21.49 #25 Text 0 File WriterStatus.cpp, Line 234
falling back to disc fixation

2.21.49 #26 SCSI -1026 File Cdrdrv.cpp, Line 1207
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x04

2.21.49 #27 mmc -1026 File WriterStatus.cpp, Line 225
Current program area empty

2.21.49 #28 TRANSFER -19 File WriterStatus.cpp, Line 225
Could not perform Fixation

2.21.49 #29 Phase 38 File dlgbrnst.cpp, Line 1436
Burn process failed at 10x (1.500 KB/s)

2.21.49 #30 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22.22.00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 13/04/02 12.52.58
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22.22.00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69574 bytes, created 05/05/99 22.22.00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ElbyCDIO.vxd': Ver=3, 2, 7, 1, size=15123 bytes, created 14/11/01 9.54.44

[akiro]

WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 05/05/99 22.22.00
Nero Version: 5.5.7.2
Recorder: <PLEXTOR CD-R PX-W1210A> Version: 1.10 - HA 0 TA 0 - 5.5.7.2
Adapter driver: <ESDI_506
> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <CREATIVE DVD-ROM DVD6240E>Version: 0101 - HA 0 TA 1 - 5.5.7.2
Adapter driver: <ESDI_506
> HA 0
Bus Type : default (0) -> ATAPI
PLEXTOR CD-R PX-W1210A (Target 0, E: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
CREATIVE DVD-ROM DVD6240E (Target 1, F: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 510MB (523200kB)
Free physical memory: 37MB (38752kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: On

CD-ROM (ISO)
20.2.2003

0.46.25 #1 Phase 72 File dlgbrnst.cpp, Line 1436
BURN-Proof activated

0.46.25 #2 Text 0 File Reader.cpp, Line 117
Reader running

0.46.25 #3 Text 0 File Writer.cpp, Line 127
Writer PLEXTOR CD-R PX-W1210A running

0.46.25 #4 ISO9660GEN -11 File geniso.cpp, Line 4307
First writeable address = 0 (0x00000000)

0.46.25 #5 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 198122 (198122) = #198122/44:1.47
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

0.46.28 #6 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media: 337347 (74:59.72)
Last address to be written: 198124 (44:03.49)

0.46.29 #7 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder: PLEXTOR CD-R PX-W1210A;
CDRW code: 00 97 26 21; OSJ entry from: SKC Co., Ltd.
ATIP Data:
Special Info [hex] 1: B0 00 CE, 2: 61 1A 15 (LI 97:26.21), 3: 4A 3B 49 (LO 74:59.73)
Additional Info [hex] 1: 24 1A D0, 2: 26 B2 4A, 3: 00 00 00 (invalid)

0.46.29 #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PLEXTOR CD-R PX-W1210A for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 406061056

0.46.29 #9 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.

0.46.29 #10 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 198122 (198122) = #198122/44:1.47
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 198120 blocks [PLEXTOR CD-R PX-W1210A]
--------------------------------------------------------------

0.46.29 #11 Phase 24 File dlgbrnst.cpp, Line 1436
Caching of files started

0.46.29 #12 Phase 25 File dlgbrnst.cpp, Line 1436
Caching of files completed

0.46.29 #13 Phase 36 File dlgbrnst.cpp, Line 1436
Burn process started at 10x (1.500 KB/s)

0.46.29 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

0.46.29 #15 Text 0 File Mmc.cpp, Line 15217
Set BUFE: BURN-Proof -> ON

0.46.58 #16 Text 0 File Writer.cpp, Line 304
00:46:58.110 - PLEXTOR CD-R PX-W1210A : Queue again later (Intervall : 43msec)

0.50.58 #17 CDR -20 File Writer.cpp, Line 311
Queuing failed

0.50.58 #18 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

0.50.58 #19 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

0.54.58 #20 CDR -1175 File Cdrdrv.cpp, Line 1266
Internal trace
Resending of command failed after 240000ms
CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00


0.54.58 #21 SCSI -1169 File Cdrdrv.cpp, Line 1267
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

1.03.47 #22 Phase 40 File dlgbrnst.cpp, Line 1148
Aborted by user

1.04.14 #23 CDR -1175 File Cdrdrv.cpp, Line 1266
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 00 00 00 00 00 00 00 00 00 00 00 00


1.04.14 #24 SCSI -1169 File Cdrdrv.cpp, Line 1267
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

1.04.14 #25 mmc -1169 File WriterStatus.cpp, Line 183
Logical unit not ready, operation in progress

1.04.14 #26 TRANSFER -18 File WriterStatus.cpp, Line 183
Could not perform EndTrack

1.04.14 #27 CDR -201 File WriterStatus.cpp, Line 186
Invalid writestate

1.04.14 #28 TRANSFER -18 File WriterStatus.cpp, Line 186
Could not perform EndTrack

1.04.45 #29 CDR -1175 File Cdrdrv.cpp, Line 1266
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 5A 00 05 00 00 00 00 00 58 00 00 00


1.04.45 #30 SCSI -1169 File Cdrdrv.cpp, Line 1267
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03CD06C0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

1.04.45 #31 mmc -1169 File WriterStatus.cpp, Line 225
Logical unit not ready, operation in progress

1.04.45 #32 TRANSFER -19 File WriterStatus.cpp, Line 225
Could not perform Fixation

1.04.45 #33 Text 0 File WriterStatus.cpp, Line 234
falling back to disc fixation

1.05.15 #34 CDR -1175 File Cdrdrv.cpp, Line 1266
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 5A 00 05 00 00 00 00 00 58 00 00 00


1.05.15 #35 SCSI -1169 File Cdrdrv.cpp, Line 1267
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03CD05A0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

1.05.15 #36 mmc -1169 File WriterStatus.cpp, Line 225
Logical unit not ready, operation in progress

1.05.15 #37 TRANSFER -19 File WriterStatus.cpp, Line 225
Could not perform Fixation

1.05.45 #38 CDR -1175 File Cdrdrv.cpp, Line 1266
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 5A 00 05 00 00 00 00 00 58 00 00 00


1.05.45 #39 SCSI -1169 File Cdrdrv.cpp, Line 1267
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03CD0480
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

1.06.15 #40 CDR -1175 File Cdrdrv.cpp, Line 1266
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 5A 00 05 00 00 00 00 00 58 00 00 00


1.06.15 #41 SCSI -1169 File Cdrdrv.cpp, Line 1267
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03CD0480
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

1.06.15 #42 mmc -1169 File WriterStatus.cpp, Line 160
Logical unit not ready, operation in progress

1.06.15 #43 TRANSFER -39 File WriterStatus.cpp, Line 160
Could not perform EndSession

1.06.45 #44 Phase 39 File dlgbrnst.cpp, Line 1436
Burn process aborted

1.06.45 #45 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

1.07.48 #46 CDR -1175 File Cdrdrv.cpp, Line 1266
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 00 00 00 00 00 00 00 00 00 00 00 00


1.07.48 #47 SCSI -1169 File Cdrdrv.cpp, Line 1267
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

1.08.19 #48 CDR -1175 File Cdrdrv.cpp, Line 1266
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 1E 00 00 00 00 00 00 00 00 00 00 00


1.08.19 #49 SCSI -1169 File Cdrdrv.cpp, Line 1267
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22.22.00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 13/04/02 12.52.58
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22.22.00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69574 bytes, created 05/05/99 22.22.00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ElbyCDIO.vxd': Ver=3, 2, 7, 1, size=15123 bytes, created 14/11/01 9.54.44

[akiro]

nessuno può aiutarmi eh?
ç_ç

[borazzz]

ah io da oggi un problema simile al tuo
stesso masterizzatore

nn mi copia + un cd con xp vede dei driver scsi anche se nn ho periferiche scsi... le disabilito e al riavvio nn ho +il second master e scond slave se li abilito poi nero fa le bizze dicendo scsi/raid abort!!!!


[color]

[>|HaRRyFocKer|]

Io ebbi tanto tempo fa lo stesso problema solo che era con il mio mitico WAITEC 8x4x32x. Allora era un problema di velocità nel senso che questo mio cdrw verbatim era FOR-HI SPEED DRIVES ONLY. Ora con il 48x16x48x me lo scrive tranquillamente... E poi per quantro riguarda il vecchio cdrw può darsi che ne hai abusaato, che magari era venuta la sua ora, così come muore ogni cdrw dopo un certo numero di utilizzazioni...

AMEN

[Mistral PaolinuX]

Ciao !

Innanzitutto controlla che la velocitò per cui è certificato il CD-RW sia compatibile con quella di ri-scrittura del tuo dev: il CD-RW deve essere un 4x-10x high speed CD-RW, oppure il tuo dev non riesce a scriverlo (questione di materiali). In secondo luogo (e questo vale per tutti), consiglierei un bell'aggiornamento/reinstallazione del layer ASPI, usando come base di partenza http://forum.hwupgrade.it/viewtopic.php?t=423937

dove è tutto perfettamente spiegato&linkato. Ci fossero ancora problemi, sono a disposizione.

Paolo